How to replicate data from custom field in SRM to ECC
Hi,
I am using SRM 5.0, as per my requirement i need to get data from SRM (Web GUI) through custom fields in "Confirm Goods",
and need to pass this data to ECC,
I found that Message type MBGMCR; IDOC Type u2013 MBGMCR01 can be used for passing the data from SRM to ECC,
How can i pass the new data to this IDOC in SRM
and how can i get the data from this IDOC in ECC
Please help.
Thanks in advance,
Jerin.
Edited by: Jerin Joseph on Jul 23, 2009 5:06 PM
Hello,
This will help you.
Re: Replicating GR custom fields from EBP to SAP R/3
Thanks
Ashutosh
Similar Messages
-
How to extract data from custom made Idoc that is not sent
Hi experts,
Could you please advise if there is a way how to extract data from custom made idoc (it collects a lot of data from different SAP tables)? Please note that this idoc is not sent as target system is not fully maintained.
As by now, we would like to verify - what data is extracted now.
Any help, would be appreciated!Hi,
The fields that are given for each segment have their length given in EDSAPPL table. How you have to map is explained in below example.
Suppose for segment1, EDSAPPL has 3 fields so below are entries
SEGMENT FIELDNAME LENGTH
SEGMENT1 FIELD1 4
SEGMENT1 FIELD2 2
SEGMENT1 FIELD3 2
Data in EDID4 would be as follows
IDOC SEGMENT APPLICATION DATA
12345 SEGMENT1 XYZ R Y
When you are extracting data from these tables into your internal table, mapping has to be as follows:
FIELD1 = APPLICATIONDATA+0(4) to read first 4 characters of this field, because the first 4 characters in this field would belong to FIELD1
Similarly,
FIELD2 = APPLICATIONDATA+4(2).
FIELD3 = APPLICATIONDATA+6(2).
FIELD1 would have XYZ, FIELD2 = R, FIELD3 = Y
This would remain true in all cases. So all you need to do is identify which fields you want to extract, and simply code as above to extract the data from this table.
Hope this was helpful in explaining how to derive the data. -
How to delete data from single field in a database table?
Hi guys,
Plz suggest me How to delete data from single field in a database table?
thnks,
pavanhi
in addition to abv details..chk this:
http://help.sap.com/saphelp_nw2004s/helpdata/en/fc/eb3aef358411d1829f0000e829fbfe/content.htm
http://dev.mysql.com/doc/maxdb/en/34/ee7fbd293911d3a97d00a0c9449261/content.htm
regards,
madhu -
How to replicate data from MS SQL Server to Oracle
Hi,
Can someone please help me on how to replicate data from MS SQL Server to Oracle 8i database.Dear,
I'm a student.
I do simple replication on Oracle 8.0.5 successfully. (one master site and one snapshot site). I only use the SQL*Plus and Schema Manager to do.
But when I do advance replication (multimaster replication) I meet many problem. So I don't get the result.
Do you show me the technology to do that ?
Thanks ! -
How to retrieve data from a field of CLOB datatype?
How can I retrieve data from a field of CLOB datatype in Oracle
8 being called from an ASP or VB application? The recordset
object in ASP or VB doesn't support the CLOB datatype.
Thank you in advance for your help.How can I retrieve data from a field of CLOB datatype in Oracle
8 being called from an ASP or VB application? The recordset
object in ASP or VB doesn't support the CLOB datatype.
Thank you in advance for your help. Hello.. were you able to solve your problem? I'm faced with pretty much the same task.. I have a VBA application that needs to pull various pieces of data(CLOBs, BLOBs, etc..) from an Oracle8i db. -
How to extract data from the fields present in two or three tables
Hi Experts,
I have a scenario where i have to extract data from the fields of different tables. e.g. let there 2 tables which have some number of fields . I want the data of 3 fields each from these 2 tables. How can i get that??
SamHi
You can create view in tcode se11..
here you include all tables from which you want to fetch the data..
you need to give selection condition here
eg..
say select empname from table A, select empadd from table B.. where empno(from A)=empno(from B)
(note that you dont need to write queries like this.. i have just given u the example)
After creating the view you can create datasource in RSO2..
Regards
Swati -
IDOC :: how to send data from Custom Infotype in SAP HR to third party
Hi,
I have created one custom Infotype by number 9020. How to send data from this infotype to third party system and also change pointers need to trigger for this infotype.
Please help me in doing it.
I am using one Custom Message type ZTALENT and Custom Idoc Type ZTALENT.
ZTALENT Talent Management
5 E1PLOGI Header for an HR Object (Master Data or Organizational Data)
5 E1PITYP HR: Transported Infotypes and Subtypes for an Object
ZPUSER User base Data File
ZPERSON Personal Information File Segment
ZPOST Position File
ZOPE Overall Performance
ZPWORK Outside Work Experience
ZPEDUC Education Details of Employee
E1P0000 HR: HR Master Record Infotype 0000 (Actions)
E1P0001 HR: HR Master Record Infotype 0001 (Org. Assignment)
E1P0002 HR: HR Master Record Infotype 0002 (Personal Data)
E1P0016 HR Master Record: Infotype 0016 (Contract Elements)
E1P0022 HR Master Record: Infotype 0022 (Education)
E1P0023 HR Master Record: Infotype 0023 (Other/Previous Employers)
E1P0041 HR Master Record: Infotype 0041 (Date Specifications)
E1P0105 HR: HR Master Record Infotype 0105 (Communications)
ZE1P9020
ZPLANG Language Details
ZACTION Actions Changes
Regards,
KrishnaHello Shankar,
Technically TEMSE files are read by calling the following 3 function modules in sequence,
1) RSTS_OPEN_RLC or RP_TS_OPEN: open the temse object
2) RSTS_READ : read the object
3) RSTS_CLOSE: close the object
Regards,
Rajesh -
How to Retreive data from custom list on specify conditions?
Hi All,
I have custom list.And the custom list data contains 100 rows of data.
my requirement is how to retrieve custom list data from specific condition like 20-30,50-70.
Assume that i want to fetch 20 record to 30th record.
How to use the caml query for the above situation.
Please assist me.
RamaHi
Thanks for posting your issue, Kindly browse the below mentioned URL to find related the CAML query example
http://karinebosch.wordpress.com/2012/02/03/caml-and-the-client-object-model/
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh -
How to retreive data from a field that contains a "|" symbol
Hi,
Hopefully my title won't confuse anyone .
Well I am trying to create a group which would display an employee name(s).
In my case, the value comes from a field which can contain multiple values separated by a "|" symbol. See picture below.
I am pretty sure I will have to write a formula for this but simply don't know where to begin or how to write it.
Table use in this example is "ProductionProjectGroups" and will be linking this table to the "Employees" table which will display the actual employee name.
Does anyone knows how to display data if there is a "|" symbol in the field?
If you request more info please let me know.
Thank you in advance for the help.
JoeHi Abhilash,
I am looking for help on how to extract the employee's name from this field.
I have also posted more pictures with details as requested.
Thank you
Joe -
Moving data from custom fields to ekko table
Hi Experts,
I added new custom tab into me21n,me22n,me23n header thro me_gui_po_cust and me_process_po_cust.
If i enter values in my custom fields, transport_from_model this method is not triggering.i have written below code in this method.
METHOD if_ex_me_gui_po_cust~transport_from_model.
DATA: l_header TYPE REF TO if_purchase_order_mm,
ls_mepoheader TYPE mepoheader,
ls_customer TYPE ci_ekkodb.
CASE im_name.
WHEN subscreen.
mmpur_dynamic_cast l_header im_model.
CHECK NOT l_header IS INITIAL.
ls_mepoheader = l_header->get_data( ).
CALL FUNCTION 'ZMM_GET_DATA'
EXPORTING
im_ebeln = ls_mepoheader-ebeln
* im_ebelp = ls_mepoheader-ebelp
IMPORTING
ex_data = ls_customer .
MOVE-CORRESPONDING ls_mepoheader TO dynp_data_pbo.
MOVE ls_customer-ztender TO dynp_data_pbo-ztender.
MOVE ls_customer-zemdapplicable TO dynp_data_pbo-zemdapplicable.
MOVE ls_customer-zpbgapplicable TO dynp_data_pbo-zpbgapplicable.
MOVE ls_customer-zemdamount TO dynp_data_pbo-zemdamount.
MOVE ls_customer-zemdvalidity TO dynp_data_pbo-zemdvalidity.
WHEN OTHERS.
ENDCASE.
ENDMETHOD.
i cant move my values entered in custom fields to ekko table.
please help if u know..
regards,
Kavitha
Edited by: Matt on Mar 23, 2011 10:55 AM added tagsHi,
check this out.. !!
Import data from Excel to Oracle Database and
Added link From Ask Tom.. your requirement you would be satisfied.. I supppose.. !!
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:908428873069
- Pavan Kumar N -
How to extract data from xml field to dropdown list?
Hi,
I have designed a form and connected to a SQL server database using a web service. The XML data retrieved from wsdl connection is currently hold in a text field called 'XMLfield'. I need to extract the data such as 'PersonnelName' from XMLfield into a dropdown list. I used the following code and I do not get any error, but nothing come up and all my fields in the forms become bank when i click the dropdown list.
I would appreciate it if anyone can help me with this issue.
form1.DropDownList::click - (JavaScript, client)
xfa.datasets.data.loadXML(form1.XMLfield.rawValue,0,1);
form1.XMLfield.rawValue = xfa.datasets.data.saveXML();
var dataGroup = xfa.resolveNode("xfa.data.Timesheet.Personnel.PersonnelName");
var dataGroupLength = dataGroup.nodes.length;
if (dataGroupLength == 0) {
xfa.host.messageBox("There are no parts in the XML doc");
else {
for (var i=0; i < dataGroupLength; i++){
this.addItem(dataGroup.nodes.item(i).nodes.item(0).value);
Thanks,
RoyaHi Roya,
I think the loadXML will override your form data, so blanking out your fields. You could try loading the xml data at the xfa.datasets level (that is xfa.datasets.loadXML(form1.XMLfield.rawValue,0,1);) or using E4X to process the XML.
Another option though might be more rework is to use the Acrobat SOAP api which will return you a JavaScript object so you wont have to do any XML work.
There's a good intro to the SOAP api here, http://www.avoka.com/blog/page/11/.
Regards
Bruce -
How to fetch data from Customer (Centrally) XD03...
hi friends,
how to fetch the data which is maintained in the transaction XD03.
flow to reach the required data: XD03 --> enter customer number and press enter --> now it takes you to the next screen --> in menu bar EXTRAS --> TEXTS (here we can see the document with the column Description, 1st line and few more...
here my requirement is to fetch the details that are maintained in the columns DESCRIPTION and in 1st LINE.
so can i know any function modules or tables where i can fetch or find this data...
...thanks in advanceHi,
Use the Function module READ_TEXT
Pass the values for the following Parameters in the function module..
ID
LANGUAGE
NAME
OBJECT
goto XD03 --> enter customer number and press enter --> now it takes you to the next screen --> in menu bar EXTRAS > TEXTS Double click on the value of the Description column.. this will take to the WORD Document now click on the Menu GOTO> HEADER , this will display TEXT NAME, Language, TEXT ID & the TEXT OBJECT -
How to replicate data from one page to another page
I have a five page document that has the same information on all five pages but each page goes to a different person. I want to fill-in the first page and have the information replicate to the other four. Any suggestion?
Are you using LiveCycle (XML form)?
If so you need to set the binding for the fields to "Global". -
How to get data from screen for custom field?
Hi,
I have added custiom field in header for MIGO_GI transaction using BADI MB_MIGO_BADI by using Method PBO_HEADER, How to get the data from that field into method PAI_HEADER, if any body knows,please let me know.
Thanks.hi
you need to apppend your custom field in the GOHEAD structure , then automatically you we will get field value in the method IF_EX_MB_MIGO_BADI~PAI_HEADER with internal table is_gohead.
Pls try once?
Tks .. venkat -
How to select data from a table using a date field in the where condition?
How to select data from a table using a date field in the where condition?
For eg:
data itab like equk occurs 0 with header line.
select * from equk into table itab where werks = 'C001'
and bdatu = '31129999'.
thanks.Hi Ramesh,
Specify the date format as YYYYMMDD in where condition.
Dates are internally stored in SAP as YYYYMMDD only.
Change your date format in WHERE condition as follows.
data itab like equk occurs 0 with header line.
select * from equk into table itab where werks = 'C001'
and bdatu = <b>'99991231'.</b>
I doubt check your data base table EQUK on this date for the existince of data.
Otherwise, just change the conidition on BDATU like below to see all entries prior to this date.
data itab like equk occurs 0 with header line.
select * from equk into table itab where werks = 'C001'
and <b> bdatu <= '99991231'.</b>
Thanks,
Vinay
Thanks,
Vinay
Maybe you are looking for
-
Read Statement in Dynamic Internal Table?
Hi, Is it possible <b>read</b> statement in <b>Dynamic Internal</b> table? Thanls, Suresh.
-
TS4185 what causes voices to croak in Facetime since I updated to Mountain lion?
what causes voices to croak in Facetime since I updated to Mountain lion?
-
Mac OS X install disc not installing drivers in Windows 7
So I just installed Windows 7 Ultimate OEM 32 bit, and everything went (relatively) smoothly... The problem is that now I'm at the desktop and when I insert the Mac OS X install disc, I am not able to install drivers. Instead, I am prompted to either
-
HT4972 I need to update my iPad 1 to ioS5 how do I get this update?
How do I update my iPad 1 to ioS5 or later?
-
Here's my issue: I cannot use Time Machine to restore specific Pages documents that are backed up to an external drive. The current versions aren't corrupted and open just find. But I need the old versions. Each time I attempt a restore I get "The op