How to resize at runtime only the height of a flash animation

Hi all,
I try to explain my problem by example:
I have set a stage to this size: 1200x330 px.
All graphics in this animation area greater than the stage, so I could extend the stage size to 1200 x 450 px.
So, my miz size for the movie is 1200x330 px and max size is 1200x450 px.
Is there a way to show the movie at minimum size or maximum size based on the browser window heigt?
Please note that the movie is put iside a table in my html file.
I would like to obtain something similar to this: http://www.audi.it
If you resize the browser window the flash movie (and only the flash movie) will be shown in different ways.
If the browser window is higher enough the whole flash movie is shown.
If the browser window is not higher enough, the top and the bottom of the movie will be cut.
Of course there is a trick that cuts the movie only to a specified minimum size.
I need something similar.
How can I do this with Flash 8?
TIA for any help.
tony

karthic_vkn wrote:
Changing stage height is not possible on runtime, but you can do this on different way. For example, your stage height 500x500 it means you can see the object or animation within the stage height. But in runtime you’re trying to animate or expending a text box to exceed the stage height. Then go to publish setting and change the 'Dimension' property value to 'Percent', Now run it on browser, you can able to see the full animation or full text box if browser has enough of space.
Hi Karthic, thanks for your reply.
Your solution should work when you have a movie that is alone in the page.
What about a movie that is inside a table cell?
I have a 3 rows table and the animation is in the middle cell.
Here, is the cell that should resize automatically. Is it right?
Anywhay I would like to change only the height of the movie, without modifying the witdh.
Can't think of a solution to this.
Thanks again, anyway
tony

Similar Messages

How to hide some functions in the menu bar of flash paper

Do anyone know how to hide some functions in the menu bar of
flash paper? As I want to show a swf file(converted from pdf) on
the website without printing function. How can I do it?
Also, if possible, can anyone know how to hide all functions
on the menu bar except the logo of flash paper?
Thank you very much, it is very urgent.

Here is an article about how to integrate flashPaper into
Director. It has most of the functions that can be executed on
flashPaper. Maybe it will help?
http://www.adobe.com/devnet/director/articles/flashpaper_in_director.html
and here is all his code
http://www.mediamacros.com/item/item-1006687373/
Note: it is for 1.01, but works with 2.0

I just really need to know... After desigining my UX, how do I go about adding the image into ADOBE FLASH BUILDER to script on top of it?

I just really need to know... After desigining my UX, how do I go about adding the image into ADOBE FLASH BUILDER to script on top of it?
Any and all advice is welcome.

Do you have different versions of the graphic novel pages, or is there just one version of the page? If there is one version, can you crop into the page without losing anything important?
I would guess that there is one version, and that cropping into the page will lose something important. If that's the case, here's how I would handle it:
Make a stage that is 14:9. The size doesn't matter, but 1400x900 could be a good starting point.
Put down a background texture that fits well with the look of the other images. Make that fill the 1400x900 stage.
Place your page graphics so that they are within the center 1200x788 area of the stage.
Set the stage scalemode to "noBorder".
You now have a layout that will work on all devices, as narrow as iPad, and as wide as iPhone 5. All without any code. On the widest devices you'll see a bit of your background pattern to the left and right of the page graphic. On the narrowest devices you'll see a bit of background pattern above and below the page graphic. But you won't lose sight of anything important.

How to record and plot only the zoomed portion of a Graph or Chart?

I'm using LabVIEW 8.6 and have problem plotting only zoomed part of a graph or chart onto other. Please help.

Sorry, your VI makes absolutely no sense. First you slowly generate chart data, then you write it to a file, read it back from a file, do some exceedingly elaborate while loop that could be done with almost no code at all, then chart all data at once again. The stop button in the while loop makes no sense, because the while loop executes so fast that it is not possible to actually stop it while it is running, only if the button has already been pressed during the first FOR loop.
What is the purpose of the two arrays? They don't seem to serve any purpose. Why are you getting the array size with every iteration of the loop? Once, right before the loop should be enough. Index array is resizable, so only one instance is enough. Instead, array to cluster is probably all you need.
The sequence structure is only needed because you write, and then immediately read from the file. All you probably need is to write to the file and wire the 2D array to the seconds structure. Now we have a data dependency and the sequence structure is no longer needed.
Can you tell us a little more how you are zooming. Do you want to zoom any of the two graphs and automatically zoom the other accordingly?
As it currently stands, only the first chart gets data, so zooming the other one seems useless. Once the second chart has data, the VI stops and you can't do much either programmatically. Please explain how you are zooming.
LabVIEW Champion . Do more with less code and in less time .

How can I print using only the black ink cartridge?

I have a officejet 4620 that I need to know how to set up to have the option of using the black ink cartridge only. I rarely ever use color ink and I dont want $30 worth of color ink to dwindle away while printing pages that do not need any sort of quality printing. How can I change this setting? I have a Mac and there are hardly any options when trying to print anything.
Thanks!

Hello @downeyke , and welcome to the HP Forums!
I understand you are looking into black ink options. I would love to try and help you, but I do need a little information first. I am linking an HP Support document below that will show you how to find which version of the Mac operating system you are using. With this information we can provide you with accurate information.
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Please let me know what you find. Thanks for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

How to resize project without losing the image resolution?

I am trying to resize a project that recorded in 1271 x 768
px to 800 x 483 px. I did it by clicked 'Project' > 'Resize
Project...'. But after resize, the resolution of the movie is not
clear, became blur. How to resize the project so that I'll have
clearer movie? Thanks.

Hi obtis and welcome to our community
Unfortunately, there is little you may do to avoid this. The
best way to avoid it is to simply record initially at the size you
need so you don't have to use the Resize function.
Here's the deal. Captivate stores images in the project as
bitmapped images. Otherwise known as "raster" images. Basically
they are a mosaic that comprises the picture. Initially, all is
well and is crystal clear. But when you scale down a raster or
bitmapped image, you are simply moving all the picture elements
(PixEls) closer together. They overlap and the computer will
calculate new values for what color they should be. Depending on
how much you are resizing, the clarity drop can be acceptable or
horribly bad. The more you resize smaller the worse it gets.
Hopefully this helps... Rick

How do i listen to only the songs downloaded to my mobile

when i am on wifi and i want to shuffle through my library, i just want it to shuffle songs downloaded from iCloud to my device, instead it shuffles through everything in iTunes match
help
thanks!

Hi,
Go to settings for music. You can turn off show all music leaving you with only the music downloaded to phone.
Jim

How do you subscribe to only the ones you want?

In the prefs it is a very broad subscibe to threads I start or subscribe to threads I post in. Well how do you subscribe to just the threads I want to?

Now if you want to just subcribe to the Group in general; as soon as you get to desired group listing, before clicking on a topic, look to right and click on email notification.
Also if your tired of a Particular Group when you go to that group click again to discontinue email notification. It will not stop other threads on your post , but will stop email Notifications.
You can also set in prefrence to receive notication to Topics you reply to
Message was edited by: PjonesCET

How do I re-download only the music that was previously DRM protected?

I want to use the new iTunes in the Cloud to rid myself of the dreaded m4p songs that I had been downloading for years. Is there an easy way to detect them in iTunes? I can't just download everything I have ever downloaded because it "sees" the protected music.
Basically, I want to iTunes Plus my music.

to download your previously purchased drm-protected music as iTunes plus you will still have to upgrade them to itunes plus the old way. meaning you'll have to pay for the upgrade. if you don't, you'll still be able to use the iTunes cloud service to download those tracks to all your devices, but only the 128k protected versions.

How on earth can I download the newest version of Flash Player on my Mac, OS X Yosemite?

I have tried approximately 17 times to download Flash, but keep getting stuck at the login page. When I log in to Adobe.com using my ID and password, i'm able to sign in. But when i get to the download phase of the current version of Flash, I'm asked to provide Adobe ID and password again. They are rejected. Beyond frustrated. Any help would be greatly appreciated.
Ely

Andrew, i hope you receive this cuz i can't figure out how to thank you on
the forum. Thank you!! it worked beautifully. Your help is much appreciated.
Elana
On Tue, Dec 16, 2014 at 4:16 PM, wdrewingram <[email protected]>

How to display PDF file, inside the SWF file or flash exe file

I have create the application for Employee details using flash actionscript 3.0
This application is to view the organization employee details, iam using the tree component in this application,
the tree component is to get the dada via xml file, this xml file save in the remote server ,
I display the PDF file inside the swf file to using " StageWebView" class . Then i goto Publish Setting to change the player Adobe Air 2.6 and run the flash file using
ctr-l + Enter . It is work correctly the PDF file is Displayed inside the Swf Output. But I Publish this file to exe . then i run the exe it is not working .
The application is run The xml data is onely get and displayed the Tree component then i click the tree item employee name the xml data in not display and the pdf file is not open .
Pls Help...................

hi i need to display the pdf file inside the swf file or flash exe file .
I use the navigateToURL class this is open the pdf file on the browser. I want to display the pdf file in the swf window .
Please suggest.

How to resize watermark to be the same size for vertical/horizontal images?

I am using File -> Place menu to place my watermark onto the images.
No matter what I try so far, the absolute size of the watermark comes out different Portrait/Landscape images.
Watermark is smaller on Portrait and larger on Landscape images. I tried resizing writing in the number of pixels during the File->place command, but no luck. Photoshop resizes the watermark based on the percentages, and I don't know why image orientation matters.
ideally I want my watermark to be the same size, and I can use absolute pixel dimensions if needed. How do I do this?

Hi Doug - What exactly are you trying to do? Is the third
child being added dynamically, and you want it added above the
first child? If so, you can use the addChildAt() method when adding
the child to the container. addChildAt() takes an index and the
child object is added at that index and all other children are
reshuffled to maintain the ordering. IE:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
layout="vertical">
<mx:TitleWindow layout="vertical" id="tw">
<mx:Button id="a" />
<mx:Button id="b" click="go();"/>
</mx:TitleWindow>
<mx:Script>
<![CDATA[
private function go():void
var c:Button = new Button();
c.label="new";
tw.addChildAt(c, 0);
]]>
</mx:Script>
</mx:Application>
Does that help, or am I misinterpreting what you're trying to
do?

How to stop and start only the process of Oracle Application Express?

I'd like to know how to stop the process of Oracle Application Express on my server installed oracle express package.
After installed Oracle Express edition, not only oracle database server processes but also Oracle Application Express, such as http server, is started automatically...
I hope to stop and start Application Express on demand but is this feature enabled?

Oracle Apex is an API, if that helps you understand / visualize. You do not start Apex process nor stop it.
When an Apex session starts it starts calling the API.
You can however start / stop the listener. It may be OHS, ApexListener and the J2EE container running it, OC4J or any other "server" that you are using.
The built-in EPG is something like an API again, you cannot start / stop it but you can disable/enable it with DBMS_XDB.SETHTTPPORT API.
Regards,

Weblogic Portal 10.3.5 - JSR-168 Portlet resize at runtime by the users

One of the requirement I'm trying to develop in WLP 10.3.5 for JSR-168 Portlet is to give the end user the flexibilty to resize (Just like we can do in Iframe in IE) it in runtime. Is it possible to do this ?
Any helpful link / pointers are welcome.
Edited by: hari_wc on Mar 25, 2013 8:46 AM

Hi,
Could someone pls explain which cache is used to cache portlet content and in which form the content is cached?

How to resize a frame to the dimensions of the inner image?

Hi,
I'm preparing a JS script.
I need to resize a frame (InDesign) to the dimensions of an inner image (in fact, the image contained by the frame itself).
So:
1) I need to control if the frame is bigger (larger) than the image inside it.
2) If (1) it's true, I need to obtain the dimensions of the inner image and apply them to the frame.
3) At the end, I will have that the frame matches perfectly the image.
Is it possible?
Thanks and best regards,
Francesco Jonus

1) I need to control if the frame is bigger (larger) than the image inside it.
How do you define this?
It's obvious for the one on the left, but what about the one on the right?
If you just care about area, then compute the area and check:
fb = app.selection[0].geometricBounds;
framewidth = fb[3]-fb[1];
frameheight = fb[2]-fb[0];
framesize = framewidth * frameheight;
ib = app.selection[0].images[0].geometricBounds;
imagewidth = ib[3]-ib[1];
imageheght = ib[2]-ib[0];
imagesize = imagewidth * imageheight;
if (framesize < imagesize) {
alert("Frame is smaller!");

How to resize at runtime only the height of a flash animation

Similar Messages

Maybe you are looking for