How to resolve partial result warning msg in WEBI?
Hi
how you resolve partial result warning msg in WEBI?
can any one please guide me.
Regards,
Mahendra
Hello,
Go to Data Access à Edit à Query Properties --> Uncheck the maximum rows retrieved option. This is limiting the number of rows which need to be retrieved.
Regards,
Shwetha
Similar Messages
-
How to limit search results to a single web
This is probably an easy one to figure out, but I wonder what the best way would be to limit search results from a single web - do you create a content source for that or is there a better way, one which you can configure for multiple search site collections?
Hi,
In SharePoint 2013, we can create content resource for Search Service Application, site collection and site as below:
http://technet.microsoft.com/en-us/library/jj683115(v=office.15).aspx
If you are using Search related web part, you could create content resource in site collection and build query to path=http://webapplication*. Then configure web part to use the specific content resource. Please check the link below, the link is for creating
content resource in SSA, you could go to site settings > site collection > search result sources.
http://techmikael.blogspot.com/2013/04/limiting-search-results-in-sharepoint.html
However, I’d recommend you using property filter to limit search results to one web application. Please try the steps below:
Build your query.
Basics > query text, input path:http://sp:26* (this limit search results to web application sp:26)
Click test query and see if it return results.
Regards,
Rebecca Tu
TechNet Community Support -
[ALBPM-5.7] - How to use the result of a invoked web service?
Using PBL I wrote the following piece of code:
........some rows........
request as Ex1_WebServices.Ph.GetSuperiorRequest2
response as Ex1_WebServices.Ph.GetSuperiorResponse2
lm as MyPrj.LineManager
request.alias = "danieas"
getSuperior PeopleHierarchyNavigatorService
using getSuperiorRequest = request
returning response = superiorResponse
if response is not null then
lm.firstname = String(response.people.person.firstname)
lm.lastname = String(response.people.person.lastname)
else
logMessage "response is null" using severity = DEBUG
end
the service is correctly called and the right answer is received:
<?xml version="1.0" encoding="utf-8"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP-ENV:Header />
<SOAP-ENV:Body>
<tns:people xmlns:tns="http://ws1.example.com">
<tns:person>
<tns:deptNumber>1111111111111</tns:deptNumber>
<tns:unit>16</tns:unit>
<tns:team>49</tns:team>
<tns:email>[email protected]</tns:email>
<tns:firstname>Franz</tns:firstname>
<tns:lastname>PAGNOTTA</tns:lastname>
</tns:person>
</tns:people>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
anyway
lm.firstname = String(response.people.person.firstname)
fails reporting the following stacktrace:
Null reference found in 'response.people'. The expected type was 'ROQ_WebServices.Ph.ListOfPeople'.
fuego.compiler.NullReferenceException: Null reference found in 'response.people'. The expected type was 'ROQ_WebServices.Ph.ListOfPeople'.
at fuego.compiler.MemberReference.run(MemberReference.java:553)
at fuego.compiler.Node.value(Node.java:2279)
Anybody can help?A partial solution
The real answer is:
<?xml version="1.0" encoding="utf-8"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP-ENV:Header />
<SOAP-ENV:Body>
<ns1:people xmlns:ns1="http://ws1.example.com">
<ns1:person>
<ns1:deptNumber>1111111111111</ns1:deptNumber>
<ns1:unit>16</ns1:unit>
<ns1:team>49</ns1:team>
<ns1:email>[email protected]</ns1:email>
<ns1:firstname>Franz</ns1:firstname>
<ns1:lastname>PAGNOTTA</ns1:lastname>
</ns1:person>
</ns1:people>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
instead of
<?xml version="1.0" encoding="utf-8"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP-ENV:Header />
<SOAP-ENV:Body>
<tns:people xmlns:tns="http://ws1.example.com">
<tns:person>
<tns:deptNumber>1111111111111</tns:deptNumber>
<tns:unit>16</tns:unit>
<tns:team>49</tns:team>
<tns:email>[email protected]</tns:email>
<tns:firstname>Franz</tns:firstname>
<tns:lastname>PAGNOTTA</tns:lastname>
</tns:person>
</tns:people>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
that is there is ns1 instead of tns as name prefix (I see it by the debugger).
To get out a string, for example the lastname, an Xpath expression can be used:
"/ns1:people/ns1:person/ns1:lastname"
that put into BPL becomes:
selectString(response, xpath : "/ns1:people/ns1:person/ns1:lastname")
but to write this code I can only figure out that BPM substituted tns with ns1 in other words noone garantee that the prefix will be always ns1.
Is there a way to get it out by a program? -
How to fix a security warning on a web form?
hi, I have added a new form which I have modified, and it is coming up with a security warning (see attached screenshot)
Is there any reason why this is happening and is there anything I can do to make it secure?
Form is here:
(www.eastsidestudios.com.au > book now > view cart > checkout)
The checkout form is the one that has the security warning.
This is the code on the form:
<div class="checkOut">
<h3>CHECKOUT</h3>
<h5>* These fields are required</h5>
<form action="http://www.eastsidestudios.com.au/FormProcessv2.aspx?WebFormID=42582&OID={module_oid}&OTYPE={module_otype}&EID={module_eid}&CID={module_cid}" enctype="multipart/form-data" onsubmit="return checkWholeForm73108(this)" method="post" name="catwebformform73108">
<table width="600" cellspacing="0" cellpadding="2" border="0" class="webform">
<tbody>
<tr>
<td colspan="3">
<table width="600" cellspacing="0" cellpadding="2" border="0" class="webform">
<tbody>
<tr>
<td colspan="3"><label for="Title">Title</label>
<br />
<select class="cat_dropdown_smaller" id="Title" name="Title">
<option value="436503">MISS</option>
<option selected="selected" value="436500">MR</option>
<option value="436501">MRS</option>
<option value="436502">MS</option>
</select></td>
</tr>
<tr>
<td colspan="2"><label for="FirstName">Parent First Name <span class="req">*</span></label>
<br />
<input type="text" maxlength="255" class="cat_textbox" id="FirstName" name="FirstName" /></td>
<td colspan="2"><label for="LastName">Parent Last Name <span class="req">*</span></label>
<br />
<input type="text" maxlength="255" class="cat_textbox" id="LastName" name="LastName" /></td>
</tr>
<tr>
</tr>
<tr>
<td colspan="3"><label for="EmailAddress">Email Address <span class="req">*</span></label>
<br />
<input type="text" maxlength="255" class="cat_textbox" id="EmailAddress" name="EmailAddress" /></td>
</tr>
<tr>
<td style="width: 188px;"><label for="HomeAddress">Home Address <span class="req">*</span></label>
<br />
<input type="text" maxlength="500" class="cat_textbox" id="HomeAddress" name="HomeAddress" /></td>
<td colspan="3"><label for="HomeCity">Suburb <span class="req">*</span></label>
<br />
<input type="text" maxlength="255" class="cat_textbox" id="HomeCity" name="HomeCity" /></td>
<td colspan="3" style="width: 172px;"><label for="HomeZip">Zipcode/Postcode <span class="req">*</span></label>
<br />
<input type="text" maxlength="255" class="cat_textbox" id="HomeZip" name="HomeZip" /></td>
</tr>
<tr>
</tr>
<tr>
</tr>
<tr>
<td colspan="3"><label for="HomePhone">Home Phone Number <span class="req">*</span></label>
<br />
<input type="text" maxlength="255" class="cat_textbox" id="HomePhone" name="HomePhone" /></td>
</tr>
<tr>
<td colspan="3"><label for="CellPhone">Cell Phone Number <span class="req">*</span></label>
<br />
<input type="text" maxlength="255" class="cat_textbox" id="CellPhone" name="CellPhone" /></td>
</tr>
<tr>
<td colspan="3"><label>Payment Method <span class="req">*</span></label>
<br />
<input type="radio" value="5" id="PaymentMethodType_5" name="PaymentMethodType" />
PayPal<br />
</td>
</tr>
<tr>
<td><label for="CAT_Custom_259470">Child 1 Name <span class="req">*</span></label>
<br />
<input type="text" class="cat_textbox" id="CAT_Custom_259470" name="CAT_Custom_259470" maxlength="1024" /></td>
<td colspan="3"><label for="CAT_Custom_259481">Date of Birth Child 1 <span class="req">*</span></label>
<br />
<input type="text" class="cat_textbox" id="CAT_Custom_259481" name="CAT_Custom_259481" maxlength="1024" /></td>
<td colspan="3"><label for="CAT_Custom_259484">T-Shirt Size - Child 1 (holiday camp only)</label>
<br />
<select class="cat_dropdown" id="CAT_Custom_259484" name="CAT_Custom_259484">
<option value=" ">-- Please select --</option>
<option value="XS">XS</option>
<option value="S">S</option>
<option value="M">M</option>
<option value="L">L</option>
</select></td>
</tr>
<tr>
</tr>
<tr>
</tr>
<tr>
<td><label for="CAT_Custom_259475">Child 2 Name</label>
<br />
<input type="text" class="cat_textbox" id="CAT_Custom_259475" name="CAT_Custom_259475" maxlength="1024" /></td>
<td colspan="3"><label for="CAT_Custom_259482">Date of Birth Child 2</label>
<br />
<input type="text" class="cat_textbox" id="CAT_Custom_259482" name="CAT_Custom_259482" maxlength="1024" /></td>
<td colspan="3"><label for="CAT_Custom_259485">T-Shirt Size - Child 2 (holiday camp only)</label>
<br />
<select class="cat_dropdown" id="CAT_Custom_259485" name="CAT_Custom_259485">
<option value=" ">-- Please select --</option>
<option value="XS">XS</option>
<option value="S">S</option>
<option value="M">M</option>
<option value="L">L</option>
<option value="XL">XL</option>
</select></td>
</tr>
<tr>
</tr>
<tr>
</tr>
<tr>
<td colspan="3"><label for="CAT_Custom_259472">School</label>
<br />
<input type="text" class="cat_textbox" id="CAT_Custom_259472" name="CAT_Custom_259472" maxlength="1024" /></td>
</tr>
<tr>
<td colspan="3"><label>I hereby give permission for my child to attend Eastside Studios and I understand that my child will be supervised for the duration of the class camp and/or aftercare hours only. (Aftercare hours only available during holiday camps) <span class="req">*</span></label>
<br />
<input type="radio" value="Yes" id="CAT_Custom_259476_0" name="CAT_Custom_259476" checked="checked" />
Yes</td>
</tr>
<tr>
<td colspan="3"><label for="CAT_Custom_259473">Does your child have any condition/illnesses/allergies that we need to be aware of?</label>
<br />
<textarea onkeydown="if(this.value.length>=1024)this.value=this.value.substring(0,1023);" class="cat_listbox" rows="4" cols="10" id="CAT_Custom_259473" name="CAT_Custom_259473"></textarea></td>
</tr>
<tr>
<td colspan="3"><label>I give permission for my child to be photographed during the class and understand these photos may be used exclusively for Eastside Studios advertising material. <span class="req">*</span></label>
<br />
<input type="checkbox" value="Yes" id="CAT_Custom_259474_0" name="CAT_Custom_259474" />
Yes<br />
<input type="checkbox" value="No" id="CAT_Custom_259474_1" name="CAT_Custom_259474" />
No</td>
</tr>
<tr>
<td colspan="3"><input type="checkbox" name="CampaignList_29296" />
Subscribe to: Eastside Studios Database</td>
</tr>
<tr>
<td colspan="3"><input type="submit" id="catwebformbutton" value="Submit" class="cat_button" /></td>
</tr>
</tbody>
</table>
</td>
</tr>
</tbody>
</table>
<script type="text/javascript" src="http://www.eastsidestudios.com.au/CatalystScripts/ValidationFunctions.js"></script>
<script type="text/javascript">
//<![CDATA[
var submitcount73108 = 0;function checkWholeForm73108(theForm){var why = "";if (theForm.FirstName) why += isEmpty(theForm.FirstName.value, "First Name");if (theForm.LastName) why += isEmpty(theForm.LastName.value, "Last Name"); if (theForm.EmailAddress) why += checkEmail(theForm.EmailAddress.value); if (theForm.HomeAddress) why += isEmpty(theForm.HomeAddress.value, "Home Address"); if (theForm.HomeCity) why += isEmpty(theForm.HomeCity.value, "Home City"); if (theForm.HomeState) why += isEmpty(theForm.HomeState.value, "Home State"); if (theForm.HomeZip) why += isEmpty(theForm.HomeZip.value, "Home Zipcode"); if (theForm.HomeCountry) why += checkDropdown(theForm.HomeCountry.value, "Home Country"); if (theForm.HomePhone) why += isEmpty(theForm.HomePhone.value, "Home Phone Number"); if (theForm.CellPhone) why += isEmpty(theForm.CellPhone.value, "Cell Phone Number"); if (theForm.PaymentMethodType) why += checkSelected(theForm.PaymentMethodType, "Payment Method");if (theForm.CAT_Custom_259470) why += isEmpty(theForm.CAT_Custom_259470.value, "Child 1 Name");if (theForm.CAT_Custom_259481) why += isEmpty(theForm.CAT_Custom_259481.value, "Date of Birth Child 1");if (theForm.CAT_Custom_259476) why += checkSelected(theForm.CAT_Custom_259476, "I hereby give permission for my child to attend Eastside Studios and I understand that my child will be supervised for the duration of the class camp and/or aftercare hours only. (Aftercare hours only available during holiday camps)");if (theForm.CAT_Custom_259474) why += checkSelected(theForm.CAT_Custom_259474, "I give permission for my child to be photographed during the class and understand these photos may be used exclusively for Eastside Studios advertising material.");if(why != ""){alert(why);return false;}if(submitcount73108 == 0){submitcount73108++;theForm.submit();return false;}else{alert("Form submission is in progress.");return false;}}
//]]>
</script>
</form>
</div>The problem is in <form action="http://www.eastsidestudios.com.au/FormProcessv2.aspx?WebFormID=42582&O ID={module_oid}&OTYPE={module_otype}&EID={module_eid}&CID={mo dule_cid}"
You have to remove http://www.eastsidestudios.com.au from the action URL and make it relative:
<form action="/FormProcessv2.aspx?WebFormID=42582&O ID={module_oid}&OTYPE={module_otype}&EID={module_eid}&CID={mo dule_cid}"
Cheers,
-mario -
How to make scheduled jobs Fail if the return partial results?
How to make scheduled jobs Fail if the return partial results?
Does anyone know if there is a way to do this?
We have a number of reports that we schedule to various locations in Excel and PDF. We are frequently getting problems which are manifesting themselves as empty data providers and if we run them as Web Intelligence reports it says Partial Results. Re running the reports normally fixes the problem and returns the data correctly but the problem is that the scheduler reports them as successful and the emails or files get distributed (causing our customers to complain!!!).
Currently using XIr2 +SAP integration Kit migrating to XI 3.1 in July 2009
Any ideas/suggestion would be appreciated...
I did find reference to the adapt case ADAPT01122128 which may help but when and if are unkowns so not much help.
Ta
NickThis may be helpful to some people:
http://blogs.sun.com/milan/entry/using_web_service_to_send -
The error msg "The iPad "User's iPad" cannot be synced. You do not have enough access privileges for this operation." appears when I connect my ipad to itunes. How to resolve?
If you're running Windows, close iTunes, right-click on the iTunes icon and choose Run as Administrator, then try syncing again.
-
Flex 4 migration: how to resolve css warnings
Hi,
we are trying to migrate a our flex app to flex 4, and while compiling the app, we are seeing a lot of the following warnings. I was wondering how to resolve these warnings. We are not using flex 3 compatibility flag but are using Halo as the default theme via the compiler argument -theme=${flexlib}/themes/Halo/halo.swc.
It seems that the warnings are coming from css packaged in datavisualization.swc and halo.swc
Thanks in advance
[java] C:\svn-work\flex4p3\ui\lib\flex\frameworks\libs\datavisualization.swc$defaults.css(22): Warning: Cannot resolve namespace qualified type 'AdvancedDataGrid' in
CSS selector 'AdvancedDataGrid'
[java]
[java]
[java]
[java] C:\svn-work\flex4p3\ui\lib\flex\frameworks\libs\datavisualization.swc$defaults.css(56): Warning: Cannot resolve namespace qualified type 'AdvancedDataGridItem
Renderer' in CSS selector 'AdvancedDataGridItemRenderer'
[java]
[java]
[java]
[java] C:\svn-work\flex4p3\ui\lib\flex\frameworks\libs\datavisualization.swc$defaults.css(66): Warning: Cannot resolve namespace qualified type 'AdvancedDataGridSort
ItemRenderer' in CSS selector 'AdvancedDataGridSortItemRenderer'
[java]
[java]
[java]
[java] C:\svn-work\flex4p3\ui\lib\flex\frameworks\libs\datavisualization.swc$defaults.css(83): Warning: Cannot resolve namespace qualified type 'AdvancedDataGridHead
erRenderer' in CSS selector 'AdvancedDataGridHeaderRenderer'
[java]
[java]
[java]
[java] C:\svn-work\flex4p3\ui\lib\flex\frameworks\libs\datavisualization.swc$defaults.css(115): Warning: Cannot resolve namespace qualified type 'AdvancedListBase' i
n CSS selector 'AdvancedListBase'
[java]
[java]
[java]
[java] C:\svn-work\flex4p3\ui\lib\flex\frameworks\libs\datavisualization.swc$defaults.css(131): Warning: Cannot resolve namespace qualified type 'LegendItem' in CSS
selector 'LegendItem'
[java]
[java]
[java]
[java] C:\svn-work\flex4p3\ui\lib\flex\frameworks\libs\datavisualization.swc$defaults.css(144): Warning: Cannot resolve namespace qualified type 'PrintAdvancedDataGr
id' in CSS selector 'PrintAdvancedDataGrid'
[java]
[java]
[java]
[java] C:\svn-work\flex4p3\ui\lib\flex\frameworks\libs\datavisualization.swc$defaults.css(164): Warning: Cannot resolve namespace qualified type 'PrintOLAPDataGrid'
in CSS selector 'PrintOLAPDataGrid'
[java]
[java]
[java]
[java] C:\svn-work\flex4p3\ui\lib\flex\frameworks\themes\Halo\halo.swc$defaults.css(911): Warning: Cannot resolve namespace qualified type 'HTML' in CSS selector 'HT
ML'
[java]
[java]
[java]
[java] C:\svn-work\flex4p3\ui\lib\flex\frameworks\themes\Halo\halo.swc$defaults.css(1797): Warning: Cannot resolve namespace qualified type 'Window' in CSS selector
'Window'
[java]
[java]
[java]
[java] C:\svn-work\flex4p3\ui\lib\flex\frameworks\themes\Halo\halo.swc$defaults.css(1808): Warning: Cannot resolve namespace qualified type 'WindowedApplication' in
CSS selector 'WindowedApplication'I just saw that we are using xmlns:mx="http://www.adobe.com/2006/mxml" in all our custom components written in mxml, including our main application.
In our custom css, I have the default namespace set to:
@namespace "library://ns.adobe.com/flex/mx";
could this result in these warnings ? -
Warning msg "Signal is not contiguous"
Hi,
I used NI FGen to generate a sine wave to pump into a circuit (under test) and use NI Hi-speed Digitizer to capture the output of the circuit.
The captured signal goes through a low pass filter. This warning message appear at the filter when it is Run continuously.
'Run Once' does not have problem.
Has this got to do with synchronizing the 2 modules in the PXI system or is it a matter of wrong sample rates.
I have searched Help and it mentioned using TClk to synchronize the 2 modules.
How do you use TClk in Signal Express?
How to solve this warning msg?
Someone please help.....thanks.
Regards,
SeeMistHello,
I am glad to hear that you resolved the warning issue. In regard to the other project, are you just interesting in generating the signal once? What is the lay out of the steps in the project for both the FGEN and SCOPE? Is the FGEN set to finite or continous generation mode? How is the SCOPE step setup in the Execution Control tab?
SeeMist wrote:
Currently (another project) I use the NI-FEN step to generate a signal from a .hws file (a 25khz burst signal).
It works fine by itself and the "Scope Soft Front Panel" (SFP) is always good at capturing the generated signal.
(The output of generator is externally connected to the input of the Scope).
However, after I closed the SFP and inserted NI-Scope Acquire step in Signal Express, I was not always successful in capturing the signal generated. Sometimes okay, sometimes not.
The error occurred at the FGen step : "Finite Generation timeout"
Do I have to initialise or there is a problem with my setting? Trigger or synchronization problem?
The setting of the FGen remains the same in both tests.
The NI-Scope: Trigger = Edge ; Sample rate =100MS/s; Record Length =5000
Samantha
National Instruments
Applications Engineer -
I'm trying to do a book using Iphoto, but it no longer gives a low resolution warning like it used to in the older versions.
I don't know why it doesn't anymore, (or maybe I have to add it on somehow??) but it makes it difficult to know how much I can
zoom in on a picture and still have it be good printable resolution.
Does anyone know how to resolve this or add the warning to the latest version of iphoto?
ThanksWith iPhoto 9 the low resolution for photos warning has been dropped. The only warning one will get now is for text that has overflowed the text box:
As Larry suggested send a feature request to Apple via http://www.apple.com/feedback/iphoto.html to get it back. That's a big omission in my opinion.
You can determine what your minimum resolution is for your images (if all taken from the same camera) by dividing the pixel dimensions by the size of the larges frame in the book which would be 8.5 x 11. If it's at or above 150 dpi you'll be above Apple's previous resolution warning limit.
OT -
How to resolve the error -1073807339 when using Agilent LAN/GPIB Gateway (E5810A)?
Dear Sir/Madam,
Appreciate that you could advise me on the following error occur when connect power meter E4419B to computer via E5810A LAN/GPIB Gateway(remote interface) & run with Labview:
-1073807339
VISA Write in E4419_read_power.vi
I have added 5s timeout to Labview program but the result as previous.
There no error occurs when the power meter to computer via USB/GPIB interface(82357B).
Is it related to E5810A driver or the program I wrote?
How to resolve it?
Attachments:
E4419_read_power.vi 16 KBHi.
I'm experiencing the same problem when connecting a laser controller (New Focus Vortex TLB-6000) via the Agilent E5810A to a PC.
There are no problems when connected through a regular serial port, but timeouts arise every few seconds through the E5810A. I have another controller (SRS LDC501) which works very well with a second Agilent console.
Have you managed to find a solution to this problem?
Thanks,
Orel. -
I am no longer able to double click on a file and have it open. Any suggestions on how to resolve this problem?
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
Safari and calendar won't open due to 'calendar persistence plug- in problems'. Does anyone know what this means and how to resolve it please?
mac book pro with Mavericks 10.9.5Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful. -
I've problem with Game Center . I can't sign in Game Center on my iPad . I tap on the Game Center icon but the page is blank. I tried go to setting, my Apple ID appear but the page keep on loading and nothing pop up. How to resolve this issue?
Hi, bamboo64.
Try closing all open applications in multitasking and power cycling the device. Once this is done test the results. If the issue persists, I have included a couple troubleshooting articles that I would recommend going through.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Troubleshoot issues on an iPhone, iPad, or iPod touch
If you haven't been able to connect to the iTunes Store:
Make sure your date, time, and time zone are correct in Settings > General > Date & Time.
Note: Time Zone may list another city in your time zone.
Make sure that your iOS software is up to date by tapping Settings > General > Software Update (iOS 5 or later) or connecting your iOS device to iTunes and clicking Check for Update on your device's Summary page.
Check and verify that you're in range of a Wi-Fi router or base station. If you're on a device with cellular service, make sure that cellular data is turned on from Settings > General > Cellular.
Note: If connected to cellular data, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
Make sure that you have an active Internet connection. You can check the user guide for your device for help with connecting to the Internet.
Make sure that other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
Try resetting (turning off and then on again) your Wi-Fi router.
If the issue persists, try troubleshooting your Wi-Fi networks and connections.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Cheers,
Jason H. -
Had hard drive failure on MacBook 1.83 GHz Intel Core Duo, so had to rebuild the OS on new drive. Was on Lion 10.7.5 prior to failure, but had to reinstall Snow Leopard 10.6.3 since that was most recent OS on media I had. After finally getting ethernet connection to router working, was able to get to internet and download / upgrade to 10.6.8. I assume I can probably buy the upgrade to Mountain Lion 10.8 from there.
Problem is this, Airport will not stop self-assigning IP address for my wireless connection, and unless I can get wireless back on this laptop, doesn't make a lot of sense to continue the rebuild and reinstall of all the software that was on it prior to HD failure. Only way to my home network and router is ethernet now. Everything else on my network (Apple MacBook Pro laptops, iPhones, desktops, and non-Apple printers and laptops) is hooking up to router wirelessly fine.
Any ideas how to resolve successfully so that the airport will stop self-assigning and allow the router to assign the IP address?When see the beachball cursor, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
Please advise how to resolve error message - cannot be synced because it cannot be read from or written to.
Hello Janet,
I would recommend this article named 'Disk cannot be read from or written to' when syncing iPod or 'Firmware update failure' error when updating or restoring iPod found here http://support.apple.com/kb/ht1207
Outdated operating system software
Make sure you have the latest updates for your operating system, which may include improvements for device connections. For example, many USB and FireWire improvements have been included in Windows Service Packs.Check for Mac OS X downloads. Check for Windows updates.
Computer needs updates
Make sure you have the latest updates available for your specific computer model (or components for home-built PCs). These are usually available for download on the support website for the maker of the PC (or component). Many USB updates are listed as "Intel chipset" or just "chipset" updates on PC manufacturer's support and download websites.
Software interference
Some software can interfere with iTunes, making it unable to write files to your iPod. Think about what software you have installed, and try disabling any add-ons that might be interfering with iTunes. Check your suspected software's documentation or contact the software maker if you need assistance with disabling the application. Out-of-date or incorrectly configured security software frequently causes this issue. See these steps for identifying and troubleshooting third-party security software.
Damaged files
If one of your music files or photos is damaged, iTunes may display one of these errors when transferring that file to the iPod. If you identify a file that is causing the error, try deleting that file and reimporting it from a backup file or from the original source. You may be able to repair files by repairing the disk (see the solutions in the next section).
Unregistered .dll files (Windows)
Malware or other software may cause an issue with the digital signing of Windows XP drivers. First try restoringthe iPod using the latest version of iTunes.. If you are unable to restore it or the symptom reappears, follow the steps in this document.
Damaged disk structure
These errors can also appear if the format of your computer's hard drive or your iPod disk is damaged.
To repair your computer's hard disk—Mac OS X users, read this article for instructions. Windows users, search the Help system in Windows for chkdsk to get more information on checking and repairing the disk structure.
To repair an iPod disk—Restore the iPod or iPod shuffle using the latest version of iTunes.
Warning: Be sure to back up your data before restoring an iPod. The restore process cannot be undone. All of your songs and files will be deleted.
Corrupt iPod photo Cache
If you're getting the error when transferring photos to an iPod photo, try deleting the iPod photo Cache and then starting the photo sync again.
Lost connection
Make sure that the connections from your computer to the iPod are snug and do not wiggle or come loose during transfers. For example, if you use the wrong size dock for your iPod, it can put strain on the connectors and cause a bad connection. See these articles for more information:
Learn about iPod Universal Dock
iPod Dock: Specifications
Conflict with third-party hardware
Third-party USB or FireWire devices may also interfere with iTunes' ability to communicate with your iPod. Remove all USB and FireWire devices except the keyboard and mouse before reconnecting your iPod to the computer.
Bad hardware
Hardware failure or non-compliant hardware can cause these errors. This could be an issue with iPod hardware or with the cable or dock you're using, but more often it's an issue with the USB or FireWire card or interface in your computer. Some USB and FireWire interfaces just don't work very well. If you isolate the issue to the USB or FireWire interface in your computer, you may want to try a different port, get the computer serviced, or replace the card or interface with a better one.
If you isolate the issue to an Apple-supplied cable or dock, or the iPod itself, you can get it serviced here.
Take care,
Sterling
Maybe you are looking for
-
How can I set up group contacts on my IPad Air?
HOw can I set up group contacts on my IPad Air?
-
Dear all experts We are implementing SAP BI 7.0 SP11 and the portal and are trying to get these two 100% connected with the BI template installer etc. But when I run the "BI support tool (com.sap.ip.bi.supportdesk.default) I get an error saying : "Cr
-
How can I get my project onto a DVD? Why doesn't the computer come with iDVD?
-
ITunes fails due to lack of Quicktime
A few weeks ago, I had been using iTunes 6 just fine, until I decided to download my first song in a while, and it prompted me to update to iTunes 7. No big deal, I thought. They design these things to be user-friendly. I'll have my song in a few hou
-
Dear All, when i try to post document in the no. range which has only the balance of 400 documents,it is showing the warning message: number range RF_BELEG has reached the critical limit but i want to control this message only for last 100 documents.