How to restart "Fill Header Table for Table EQUI" job?

I've made some changes to the job through troubleshooting guide. Now my problem is I can't restart the job. The system says that the job is already running. How should I go about this?

You may try to cancel (abort) the job in the sender system directly and then restart it from TDMS process tree.

Similar Messages

Roll space error during Fill Header Table for EQUI

Hello. During ECC time slice copy, phase "Fill Header Table" for table EQUI, we are getting roll space memory error on the sender. The error is as described in SMP Note 1266386. However, as per the note it is fixed in DMIS_CNT SP10, we are at DMIS_CNT SP14. Our memory parameters are generous. We have opened up a customer message; in the mean time just wondering if anyone has come across this and fixed. Thanks,
Regards,
Shan

There is an OSS note (1273545) which is specially about SP14, SP13.
Did you go over that note?
Please let us know. Thanks!

How can I fill a table of objects from cursor with select * bulk collect???

Hi All, I have a TYPE as OBJECT
create or replace type dept2_o as object (
deptno NUMBER(2),
dname VARCHAR2(14),
loc VARCHAR2(13));
I can fill a table of objects from cursor with out select * bulk collect...., row by row
declare
TYPE dept2_t IS TABLE of dept2_o;
dept_o_tab dept2_t:=dept2_t();
i integer;
begin
i:=0;
dept_o_tab.extend(20);
for rec in (select * from dept) loop
i:=i+1;
dept_o_tab(i):=dept2_o(
deptno => rec.deptno,
dname => rec.dname,
loc =>rec.loc
end loop;
for k IN 1..i loop
dbms_output.put_line(dept_o_tab(k).deptno||' '||dept_o_tab(k).dname||' '||dept_o_tab(k).loc);
end loop;
end;
RESULT
10 ACCOUNTING NEW YORK
20 RESEARCH DALLAS
30 SALES CHICAGO
40 OPERATIONS BOSTON
But I can't fill a table of objects from cursor with select * bulk collect construction ...
declare
TYPE dept2_t IS TABLE of dept2_o;
dept_o_tab dept2_t:=dept2_t();
begin
dept_o_tab.extend(20);
select * bulk collect into dept_o_tab from dept;
end;
RESULT
ORA-06550: line 6, column 39;
PL/SQL: ORA-00947: not enough values ....
How can I fill a table of objects from cursor with select * bulk collect???

create or replace type dept_ot as object (
deptno NUMBER(2),
dname VARCHAR2(14),
loc VARCHAR2(13));
create table dept
(deptno number
,dname varchar2(14)
,loc varchar2(13)
insert into dept values (10, 'x', 'xx');
insert into dept values (20, 'y', 'yy');
insert into dept values (30, 'z', 'zz');
select dept_ot (deptno, dname, loc)
from dept
create type dept_nt is table of dept_ot
declare
   l_depts dept_nt;
begin
   select dept_ot (deptno, dname, loc)
     bulk collect
     into l_depts
     from dept
   for i in l_depts.first .. l_depts.last
   loop
      dbms_output.put_line (l_depts(i).deptno);
      dbms_output.put_line (l_depts(i).dname);
      dbms_output.put_line (l_depts(i).loc);
   end loop;
end;
/

How to retrieve the header texts for a contract

HI,
i think we need to use the FM read_text to get the header texts for a contract but dont know how to use the FM like what all the parameters are passed to that to get the header texts of a contract(va43).
any help is appreciated with points.
thanks
prasad

Hi,
Pls refer this code,
    CALL FUNCTION 'READ_TEXT'
              EXPORTING
                client                  = sy-mandt
                id                      = '0001'
                language                = sy-langu
                name                    = v_textid
                object                  = 'KNMT'
              IMPORTING
                header                  = t_header
              TABLES
                lines                   = t_lines
              EXCEPTIONS
                id                      = 1
                language                = 2
                name                    = 3
                not_found               = 4
                object                  = 5
                reference_check         = 6
                wrong_access_to_archive = 7
                OTHERS                  = 8.
            IF sy-subrc EQ 0.
              LOOP AT t_lines.
                CONCATENATE w_arktx t_lines-tdline INTO w_arktx
                                   SEPARATED BY space.
              ENDLOOP.
            ENDIF.
            IF w_arktx NE space.
              MOVE w_arktx+1(1583) TO t_lips-arktx.
            ELSEIF w_arktx EQ space.
              CLEAR w_text_name.
              CLEAR v_textid.
              wa_lips-matnr = t_lips-matnr.
              wa_lips-vkorg = t_likp-vkorg.
              wa_lips-vtweg = t_lips-vtweg.
              w_text_name = wa_lips.
              CLEAR w_arktx.
Retrieval of Sales Text
              CALL FUNCTION 'READ_TEXT'
                EXPORTING
                  client                  = sy-mandt
                  id                      = '0001'
                  language                = sy-langu
                  name                    = w_text_name
                  object                  = 'MVKE'
                IMPORTING
                  header                  = t_header
                TABLES
                  lines                   = t_lines
                EXCEPTIONS
                  id                      = 1
                  language                = 2
                  name                    = 3
                  not_found               = 4
                  object                  = 5
                  reference_check         = 6
                  wrong_access_to_archive = 7
                  OTHERS                  = 8.
              IF sy-subrc EQ 0.
                LOOP AT t_lines.
                  CONCATENATE w_arktx t_lines-tdline INTO w_arktx
                                     SEPARATED BY space.
                ENDLOOP.
              ENDIF.
              IF w_arktx NE space.
                MOVE w_arktx+1(1583) TO t_lips-arktx.
              ELSE.
REgards
srinivas

How can we stop generating spools for some batch jobs?

HI guys,
Is memory will be occupied in SAP during spool generation from batch jobs ?
If yes, to reduce occupied memory, we want to stop generating spools for few batch jobs. Please suggest me the way how we can acheive this.(Step details)
Please help me.
Thanks in Advance.
Regards,
Sahil

Stopping the spool generation for background jobs will not help you to reduce the memory load.
First check what is the total memory utilization and type of processes where the memory is being utilized more.
EWA can give you better idea to get the above details.
Spooling concept doesn't eat that much of memory what you are expecting.
Regards,
Nick Loy

How can i fill PIQRULEMASTERS table

I am testing registration using VSR and i wander when and how PIQRULEMASTERS
table get a values.
In the IDES system we have rule module 9001 = Reg. Deadline
and we also have rule container Registration Rules - General
and i linked it with program using call-up point 0016
but i can not get any values for this VSR which means always false.
did i missed something ?
regards,
jin dal

Hi,
The table CRMD_MKTPL_BDINC is populated with fields when we add fields using EEWB.
When we use AET these fields are directly appended as structures to CRM_MKTPL_ATTR table.
Hope this answers your query.
Regards,
Sayan

How to pass soap header variable for invoking siebel service in BPEL

Hi,
I am invoking siebel service in soa composite. siebel service have header variables username/password and session type. I have created global variable (message type) in BPEL anddeclare same in messages port in siebel wsdl. after that I passed the username/password and session type as hard coded in assign activity. I have deployed and tested this but, I have an exception like javax.xml.ws.soap.SOAPFaultException: Error Code: 10944642 Error Message: Error: Inbound SOAP Message - Session Token is missing or invalid or has expired
Can you please help on this..

Hi,
check this thread
http://help.sap.com/saphelp_nw04/helpdata/en/71/bcf3bf2ed7e142a5011b43c288f08c/content.htm
HTTP Header parameters in iView.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/bc-jas/~form/handler
May help you
Regards,
RK

How to check the ALV output for the background job

Hi Guru,
We are having a cutomized report which will display the result like a ALV report.
We configured it as an background job, after the completion of the background job, it will send the result to the SPOOL, and we can use SP02 to check the output,
But it is not easy for user to directly check the result easily, is there an method we can save it as an spreadsheet and send the output to a specific location or mailbox and then user can check it easily
thanks,

In SM37 ,select the Job > Spool > Select Spool No > Display Contents > Here it will show you the Output of the Report.Now select Ctrl +Shift + F12 , it will ask you to save the Spread sheet in specified location.
Best Regards,
Ankur

How to use CELLWRAPPER in 10g for scheduling the job in print server?

Hi Gurus,
I need to add CELLWRAPPER while printing a report to a delimited file from
10G report server using 10G print server job scheduler. In 6i Its working fine.
Below code I used in 10G.
V_Cellwrapper := '''"''';
Srw.Add_Parameter(v_Param_List, 'CELLWRAPPER' , V_Cellwrapper);
v_Job := Srw.Run_Report (v_Param_List);
But It is throwing error (ORA-20999). Please help.

Hi,
when I remember right, 20999 is in the range of user defined exceptions. So it's not an error message created by Oracle internally, it's created by a developer (might be in your case inside a trigger). So I would look in the database, when this exception is created. Is there no text with the error-message?
Regards
Rainer

How to fill setup table for Application 18 Customer services

Hi,
How can I fill setup table for application 18.
Regards,
ST

Hi,
To fill LIS, first set your LIS to update. use the central Tcode OMO1(for SD), OMO2(for MM) or OMO3(for other logistics) or you can set it in MC24 also(activate button).
SBIW -> settings for application specific datasources -> Logistics -> managing transfer information structures ->.... -> statistical setup Sales. (Application component 17 >transaction OLIIBW,Application component 18> OLISBW )-->select the relevent one whether sales/billings/deliveries etc in the pop-up. enter your LIS, give a name to job and execute.
Also pls chk this;
Re: query on setup table filling
Regards
CSM Reddy

How to fill a table UI element

hello,
how can I fill a table header?
any suggest?

__day_              __hour_          month_          year_
Mo                  2                  July          2210
so i could fill the table with   -
> Mo    2    July   2210
BUT not the header    -
>   day   hour month year !!
Edited by: Scafandri on May 13, 2011 1:40 PM
Edited by: Scafandri on May 13, 2011 1:41 PM

How to fill setup table based on date???

Hi Experts,
I need to do repair full request for 2lis_11_vaitm datasource, I want to load from 1st Apr 2008 to 31st March 2009, but in OLI7BW t-code i am unable to find date field in selection screen.
1) How can I fill setup table based on date?
2) In RSA7 containing records even though is it possible to fill setup table ?
Helpful answer will be appreciated with points,
Thanks in advance,
Venakt.

Venkata,
1) How can I fill setup table based on date?
--> If date not possible then try to setup with available options/characteristics.
--> While pulling into BW, extract data selectively. Give date selection at infopcakge.
2) In RSA7 containing records even though is it possible to fill setup table ?
--> Yes, you can do it.
Srini

Filling Setup Table

Hi all,
I have activated 2lis_01_s001 datasource in R/3.
Now I want to fill setup table for this.
So, How can i fill setup table for 2lis_01_s001?
Thanks in Advance,
Warm Regards,
Rishit

Hi Rishit,
goto -> SBIW -> follow the path -> give ur information structure name and run statistical setup,it brings data into ur structure then run init or full in BW.
after running init activate ur delta in LBW0.
if u run INIT or FULL then data comes from Information structure
if u run delta data comes from transparent tables.
also check the links:
Extraction from datasource 2LIS_01_S001
2LIS_01_S001
2LIS_01_S001 - Pl. help - I can not Setup LIS Environment for S001
Where is tables "SnnnBIW1 & SnnnBIW2"
2LIS_01_S001 Problem
2lis_01_s001
Hope it helps
Regards,
Tanish

HT204053 I don't know how to fill the process for the renew option?

How can I fill the blanks for renew process ?

The blanks for what 'renew process' ? What screen are you viewing and what are you trying to renew ?

Header Noe for purchase requisition

Hi,
Can anyone help me for maintaining the header note as default,so that the note will come whenever someone enters into ME51N.
How to maintain the header note for purchase requisition as default for a client.
Thanks in Advance.

hi,
Check this BADI...may be useful to you
ME_REQ_HEADER_TEXT "Copy Header Text: Enjoy Purchase Requisition
Thanks & Regards

How to restart "Fill Header Table for Table EQUI" job?

Similar Messages

Maybe you are looking for