How to restore table data to one week old status

I have a table vu_med_reimburse and  some of columns are VMR_MM, VMR_YYYY, VMR_ACTUAL_AMT the insert process to this table is done through another program but update of three columns are done throgh another program, by mistake all the values of above mentioned columns are updated to 0 about one week ago, is there any way to recover actual data without backup. the data samples are
Before Update(one week before)
VMR_ID     NAME     VMR_MM     VMR_YYYY     VMR_ACTUAL_AMT
1               X               10               2007                    200.00
2               Y               09               2008                    130.00
3               Z               08               2011                    560.00
After Update(by mistake) (now)
VMR_ID     NAME     VMR_MM     VMR_YYYY     VMR_ACTUAL_AMT
1               X               0                         0                         0.00
2               Y              0                         0                         0.00
3               Z              0                          0                         0.00
Please help. Thank you in advance.

after issuing the sql
FLASHBACK TABLE vecusr.vu_med_reimburse TO TIMESTAMP TO_TIMESTAMP('2013-10-16 09:30:00', 'YYYY-MM-DD HH:MI:SS');
it is showing
ORA-08180: no snapshot found based on specified time
once again i have run sql after changing the date it is showing
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 1
ORA-12801: error signaled in parallel query server P003
ORA-01555: snapshot too old: rollback segment number 4 with name
"_SYSSMU4_1152005954$" too small

Similar Messages

  • How to transfer table data from one client to another client?

    How to transfer table data from one client to another client?

    Hi,
    Look at the Blog
    /people/community.user/blog/2007/01/07/transport-table-entries
    Regards
    Sudheer

  • I wonder how to get the data entries one week to be uploaded into BW system

    HI,SDNs
        Our clients requires us to get the whole data entries to be loaded into bw system fo r onw week or get the delta data number to be loaded
        How to deal with it?
    thanks and best regards

    Dear Terry,
    In the InfoPackage selection, you can provide the week for which you want to load the data.
    If it does not help, then could you please elaborate yoyr problem.
    Best Regards,
    Ankit Agrawal
    P.S.: Assign points if helpful

  • How can I Move data from one column to another in my access table?

    I have two columns, one that stores current month’s data and one that stores last month’s data. Every month data from column 2 (this month’s data) needs to be moved to column 1 that holds last month’s data. I then null out column 2 so I can accumulates this month’s data.
    I understand how to drop a column or add a column, how do I transfer data from one column to another.
    Here is my trial code:
    <cfquery name="qQueryChangeColumnName" datasource="#dsn#">
      ALTER TABLE leaderboard
      UPDATE leaderboard SET  points2 = points3
    </cfquery>
    Unfortunately, I get the following error:
    Error Executing Database Query.
    [Macromedia][SequeLink JDBC Driver][ODBC Socket][Microsoft][ODBC Microsoft Access Driver] Syntax error in ALTER TABLE statement.
    How can I transfer my data with the alter table method?

    I looked up the Access SQL reference (which is probably a
    good place to start when having issues with Access SQL), and
    it suggests you probably need a WHERE clause in there.
    I agree the documentation is a good place to start. But you should not need a WHERE clause here.
    Too few parameters. Expected 1.
    If you run the SQL directly in Access, what are the results? At the very least, it should provide a more informative error message..

  • How do I make data from one Table flow into a separate Table

    How do I make data from one Table flow into a separate Table in iworks numbers?

    Great stuff Yvan,
    KOENIG Yvan wrote:
    Here you may see the way to transfer the contents of a column of Table A in a column of Table B
    I used two kinds of formulas.
    In the cell A2 of Table B
    the formula is :
    =Table A :: $B2
    It may be :
    =Table A :: $B
    Apply Fill Down
    Copy paste it in cell A1 which is in a header row.
    This formula does its duty but it’s not robust enough and will not survive to a Sort.
    This is why in B2, I inserted a more robust formula :
    =OFFSET(Table A :: $A$1,ROW()-1,2)
    You will find details about the functions used in Numbers User Guide delivered with every copy of iWork ‘08
    Yvan KOENIG (VALLAURIS, France) samedi 6 août 2011 17:45:22
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
    My iDisk is : <http://public.me.com/koenigyvan>
    Please : Search for questions similar to your own before submitting them to the community
    To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !
    The first suggestion was the simple answer I needed,
    Thank you

  • How do i transfer data from one internal tabe to another.

    Hi All,
             How do i transfer data from one internal tabe to another.
             Can i do it ebven if he tables are different in structure.
    Please Advice.
    Thanks in advance.

    Hi Saket Tiwari,
    I hope the earlier post by kashyap is good enough an answer. anywas in addition to it let me give a detailed
    explanation of how you can populate an internal table.
    1) Append data line by line.
         Syntax :  APPEND [<wa> TO / INITIAL LINE TO] <itab>.
    this appends new line to internal table <itab>.
    2) Using COLLECT statement.
                 COLLECT is another form of statement used for populating the internal tables.  Generally COLLECT is used while inserting lines into an internal table with unique standard key. The syntax for COLLECT statement is as shown
         Syntax : COLLECT [<wa> INTO] <itab>.
    3) Using INSERT statement
         Syntax  INSERT [<wa> INTO / INITIAL LINE INTO] <itab> [index <idx>].
    INSERT statement adds a line/work area to the internal table. You can specify the position at which the new line is to be added by using the INDEX clause with the INSERT statement.
    Now coming to your request..
    To append part or all of an internal table
         Syntax
                  APPEND LINES OF <itab1> [FROM <n1>] [TO <n2>] TO <itab2>.
    *     Note:
    Without the FROM and TO options, this statement appends the entire table <itab1> to <itab2>.*
    b) To insert part or all of an internal table into another internal table
         Syntax
              INSERT LINES OF <itab1> [FROM <n1>] [TO <n2>]
              INTO <itab2> [INDEX <idx>].
    c) Using Move statement.
    To copy entire contents of one table into another in one execution
         Syntax MOVE  <itab1> To <itab2>.
                   OR
              <itab1> = <itab2>.
    but u hav to be careful because he contents of itab2 will eb overwritten on the execution of this statement.
    These copy the contents of ITAB1 to ITAB2. Incase of internal tables with header line we have to use [] inorder to distinguish from work area. So, to copy contents of internal tables with header line  the syntax becomes,
    ITAB1[] = ITAB2[].
    Coming to the letter part of your question, Yes, we can copy values between tables having different structures.
    for this we use    
                                MOVE-CORRESPONDING <itab1> TO <itab2>
        this executes the statement for their header lines. Searches for the sub-fields which occur both in itab1 and itab2 and then generates, for all relevant field pairs which correspond to the
            sub-fields ni , statements of the form MOVE itab1-ni TO itab2-ni. The other fields remain unchanged.
    I hope the information provided has been of your help.
    Reward if useful.
    Regards,
    Jose

  • How do I transfer data from one iPhone to another?

    How do I transfer data from one iPhone to another?

    If your old device is an Apple using iOS 5 or later, and you have an iCloud account, you can transfer all your saved messages, email accounts, photos, notes, and other personal settings to your new iPhone.
    Here's how...
    Connect your old Apple device to WiFi and to a power source.
    Back it up to iCloud by going to Settings > iCloud > Storage & Backup and toggling iCloud Backup on. The time it takes to ba ckup depends on how much data you have and on the speed of your internet connection.
    iCloud backs up your device once a day. If it needs backing up before you transfer to your new iPhone 5, tap Back Up Now in Settings > iCloud > Storage & Backup. Do not start transferring before the backup is finished.
    Turn on your new iPhone and complete the setup by selecting your language and country, and choose whether to enable Location Services. When prompted, choose your WiFi network.
    When prompted to set up, choose Restore from iCloud Backup, tap Next, and enter your Apple ID and password.
    Select the backup of your old device and tap Restore. Wait until the device has finished restoring from the backup.
    When the restore process is complete, your iPhone will restart and be ready to use.
    Connect your iPhone 5 to iTunes to sync data not contained in the backup (such as music, videos, apps, and so on). You can choose the data that are synced by clicking the syncing tabs in iTunes.

  • How do i backup data from one iphone to another

    how do i backup data from one iphone to another?

    Back up your old phone, then restore your new one from the backup.  See http://support.apple.com/kb/HT2109.

  • How can I transport data from one client to another client?

    How can I transport data from one client to another client? 
    Regards,
    Subho

    hmmm, CTS = cutomizing transport?
    If you have a customizing table, there are still two possibilities.
    1. customize in DEV system and transport
    2. customize right there where you need it.
    this depends on how the maintainance view is built. If it is a simple customizing table and you get not asked for a TR when customizing a new record or changing an existing one, you hit possibility 2.

  • How to display all data on one page in web app

    Hello.
    So I have web app JSF (IceFaces framework) + JBoss all Crystal Report working perfectly. So I have page with Crystal Report tags (e.g.
    <bocrv:reportPageViewer reportSource="#{crystalReport.reportPath}" ...
    in this report I have table with some data (data from DB) and I want to display this data on one page. Unfortunately now this data are moving to the next page and unfortunately I even donu2019t know how switch to the next page (I see only info e.g. 1with 2).
    So how to display this data on one page if its impossible how to torn on pagination.

    So I canu2019t do this, I canu2019t display all data on one page (until Iu2019m using JSF tags)?
    In JSF tags Iu2019m setting only path to file. In my bean Iu2019m using u201CReportClientDocumentu201D object itu2019s easy way to load report file (u201Copenu201D method) and set parameters (u201CgetDataDefController().getParameterFieldController()u201D method) and also connect to data base (u201Clogonu201D method) but I havenu2019t this property u201CsetSeparatePages(boolean)u201D.
    Maybe Iu2019m doing this wrong and there is a simpler way maybe I can use somehow u201CCrystalReportVieweru201D please give my any advice.

  • How to pass table data to brf plus application through abap program

    Dear All,
    i have a question related to BRF Plus management through abap program.
    In brf plus application end, Field1,field2,field3 these 3 are importing parameters.
                                           Table1->structure1->field4,field5 this is the table,with in one structure is there and 2 fields.
    in my abap program, i am getting values of fields let us take field1,field2,field3,field4,field5.
    And my question is
    1) How to pass fields to BRF Plus application from abap program.
    2)How to pass Table data to BRF Plus application from abap program.
    3)How to pass Structure data to BRF Plus application from abap program.
    4)How to get the result data from BRF Plus application to my abap program.
    And finally , how to run FDT_TEMPLATE_FUNCTION_PROCESS.
    How do i get the code automatically when calling the function in brf plus application.
    Regards
    venkata.

    Hi Prabhu,
    Since it is a Custom Fm i cant see it in my system.
    Look if u want to bring data in internal table then there could be two ways::
    1) your FM should contain itab in CHANGING option , so that u can have internal table of same type and pass through FM,
    2) read values one by one and append to internal table.
    Thanks
    Rohit G

  • How to compare table data and table field

    Hi buddy,
        I have some question about how to compare table data and table field.
       1. I know there is one method:   CL_ABAP_UNIT_ASSERT=>ASSERT_TABLE_CONTAINS  , it use in unit test to compare the table data(A and B) , you can loop table A into structure A1, then use this mehtod it can compare whether table B contain structure A1.  but when I try to use this in main program it will dump.
              CL_ABAP_UNIT_ASSERT=>ASSERT_TABLE_CONTAINS(
                                                                                                        LINE    = A1
                                                                                                        TABLE = B ).
           Is there any method or FM can be used to compare the table data ?
        2. I also want to compare two table field , try to find out the different. How to realize this.
    Thank you for your sincerely answer.

    Hi Zongjie,
    What`s the difference, if you using loop A into wa_A, read table B into wa_B with all field, then compare with wa_A and wa_B.
    The question 2, seems no standard FM available here.
    Loop A into wa_A.
       Loop B into wa_B.
           if wa_A-field1 eq wa_B-field1.
           endif.
            if wa_A-field2 eq wa_B-field2. 
           endif.
       endloop.
    endloop.
    regards,
    Archer

  • How to copy table data from onde DB to another DB using clipboard

    HI,
    i copied table data from one DB to another DB, but it displays an error as "policy with check option violation" when inserting the table data.. so how to resolve the proble.. thanks in advance.

    DECLARE
    log_utl_dir VARCHAR2(100) :=('/apps/home/cmsftp/log/gaa');
    CURSOR tb_compy_cur is
    select tb.compy_acronym
    -- QC 158113 - added below
    ,tb.ivr_plan_num
    from tb_fc_compy tb,tb_xop_entitlements te
    where tb.grant_award_accept_flag = 'Y'
    and tb.ivr_plan_num = te.ivr_plan_num
    and te.entitle_name = 'GAA_RECONCILED'
    union all
    select compy_acronym
    -- QC 158113 - added below
    ,tb.ivr_plan_num
    from tb_fc_compy tb
    where tb.res_stock_flag = 'Y'
    --and   (tb.res_auto_lapse_flag = 2 OR
    --tb.res_auto_lapse_flag = 3)
    and exists (select entitle_name from tb_xop_entitlements te
    where tb.ivr_plan_num = te.ivr_plan_num
    and te.entitle_name = 'GAA_RES_FLAG'
    and te.optionee = 'Y'
    and te.psrep = 'Y'
    and te.sponsor = 'Y'
    and te.advisor = 'Y');
    v_xopgrantz_insertcount NUMBER := 0;
    -- QC 158113 - added below
    v_xopgrantz_accpt_count NUMBER := 0;
    v_user_id VARCHAR2(30);
    insert_file_id UTL_FILE.FILE_TYPE;
    insert_log_file varchar2(45) := 'xop_grantz_insertstats.log';
    BEGIN
    DBMS_OUTPUT.PUT_LINE('success1');
    insert_file_id := UTL_FILE.fopen(log_utl_dir,insert_log_file,'w');
    UTL_FILE.put_line(insert_file_id,'Starting the Process at '|| CURRENT_TIMESTAMP);
    UTL_FILE.put_line(insert_file_id,'INSERTING ROWS FOR Companies turned on for GAA_RECONCILE and GAA/RESSTOCK');
    for compy_rec in tb_compy_cur loop
    v_user_id := 'CMS'||compy_rec.compy_acronym||'_USER';
    ctx_set_session.set_user_session(v_user_id);
    dbms_output.put_line ('success2'||''|| v_user_id);
    INSERT into xop_grantz(grant_num,
    user_id,
    last_user_id,
    restrict_grant,
    child_symbol,
    parent_grant_flag,
    bulking_overide_flag,
    exerrestrict_code,
    rounding_method,
    exercisiable_dt,
    def_res_units_flag,
    opt_gain_def_elig_flag,
    opt_gain_deferred_flag,
    opt_gain_deferred_dt,
    opts_accepted,
    lst_updtby_usercd,
    accepted_type,
    GAA_eligible,
    GAA_LST_UPDTBY)
    select g.grant_num,
    v_user_id,
    'GRNTACCPT',
    'N',
    'N',
    (sel ect code
    from tb_xop_exerrestrict_codes
    where cash_allowed = 'Y'
    and cashlesshold_allowed = 'Y'
    and cashlesssell_allowed = 'Y'
    and stockswap_allowed = 'Y'
    and restricted_allowed = 'Y'
    and sar_allowed = 'Y'
    and cashmargin_allowed = 'Y'
    and cashpartial_allowed = 'Y'
    and sarsale_allowed = 'Y'),
    NULL,
    'N',
    'N',
    'N',
    NULL,
    NULL,
    NULL,
    'N',
    NULL,
    NULL
    from grantz g
    where not exists(select 1
    from xop_grantz xg
    where xg.grant_num = g.grant_num);
    v_xopgrantz_insertcount := SQL%ROWCOUNT;
    dbms_output.put_line ('1');
    -- QC158113 - Optimisation fix--starts
    DELETE FROM gt_xop_grant_accpt_type;
    INSERT INTO gt_xop_grant_accpt_type
    SELECT g.grant_num,e.ivr_plan_num,
    pk_xop_grntaccpt.fn_get_accpt_type (v_user_id,
    g.plan_num,
    g.grant_dt,
    g.opt_num,
    g.grant_cd,
    g.plan_type,
    'Y'
    FROM grantz g,tb_xop_entitlements e
    WHERE plan_type IN (2, 4, 5, 7, 8)
    and g.user_id = v_user_id
    and e.ivr_plan_num = compy_rec.ivr_plan_num
    and entitle_name = 'GAA_RES_FLAG' ;
    dbms_output.put_line ('success3');
    v_xopgrantz_accpt_count := SQL%ROWCOUNT;
    UTL_FILE.put_line(insert_file_id,'Inserted count in gt_xop_grant_acceptance '|| v_user_id||v_xopgrantz_accpt_count);
    -- QC158113 - Optimisation fix--ends
    COMMIT;
    UTL_FILE.put_line(insert_file_id,'Inserted count in XOP_GRANTZ for USER_ID '|| v_user_id||v_xopgrantz_insertcount);
    ctx_set_session.set_user_session('');
    dbms_output.put_line ('process completed');
    end loop;
    UTL_FILE.fclose(insert_file_id);
    EXCEPTION
    when others then
    rollback;
    dbms_output.put_line ('Code '||SQLCODE||':'||SQLERRM||' at '||v_user_id||' .pr_xopgrantz_insert');
    pr_xop_log_errors('Code '||SQLCODE||':'||SQLERRM||' at '||v_user_id||' .pr_xopgrantz_insert');
    pr_xop_log_errors('Code '||SQLCODE||':'||SQLERRM||'INSERTING into xop_grantz for ALL grants');
    END;
    i received this error when running the procedure also, so the table gt_xop_grant_accpt_type is not populated
    {Code -28115:ORA-28115: policy with check option violation at CMSFB_USER .pr_xopgrantz_insert}

  • How do I transfer data from one exterior harddrive to another?

    How do I transfer data from one exterior harddrive to another when they are both connected to our Imac Desktop?

    Depends what you want to transfer...
    A few more Details about what you are trying to achieve would be good.

  • How can you transfer data from one ipod to another ?

    How can you transfer data from one ipod to another ipod ?

    The geniusbar told me what to do, I understood but there is still a problem for me >:/ It's not showing up though. Like "device."  Nothing is happening, and I tried as soon as I got home. Then after half an hour, then an hour, then 3 hours. My problem is that it's not showing up! It's stuck in recovery mode! There's still like 25% battery. So I have no idea why.

Maybe you are looking for