How to resubmit PO

Hi there!
I am working on SRM 7.0 Extended Classic Scenario.
I have a Purchase Order that failed to transmit from SRM to ECC. Status is "Transfer Failed (E.Sys.)"
I got the Backend Error messages in SLG1 and fixed them in ECC.
Error in RZ20: Purchase order xxxxxxxxx: Transfer Failed; Resubmit
How do I resubmit it?
Many Thanks
Ezequiel

Hi Ezequiel,
You can check if the PO in question was not transferred due to an internal errro. In order to check this, you can perform the following action:
- Breakpoint at FM B46B_DPO_TRANSFER;
- SE37 BBP_PD_PO_TRANSFER_EXEC, enter PO header GUID and execute;
- Program will stop at FM where the BP was set;
- Look for statement CALL FUNCTION 'BBP_PO_INBOUND' DESTINATION lv_destination;
- F6 or F5 to debug into ERP (2nd session will start). Here you can check the table lt_bapi_return in order to check if the PO has been created or not in backend.
I hope it helps.
Kind regards,
Ricardo

Similar Messages

How to resubmit the form when back button pressed

Hi,
In my application, iam implementing searching,
when i submitting the form, i got some records and i navigated all the results through next and previous buttons.
Problem occurs when i clicked on back button, it is showing "page expires and asking for resubmit the data".
How can i show the previous page, when user clicked on back button.
Iam using struts 1.0 and ibatis
Please help me out.
Thanks in advance,
Mohan

Hi mohan,
try to store your search indices in a vector and put that vector in the session scope. at page first loading you get the first index from your vector and pass it in the request scope in your action class, due to the page you have to find a way to understand the passed index in request scope and translate it to the searched word location.really I have not a code sample, but it is just an idea.
feel free to ask me.
Thanks.
Ahmad Elsafty

HT3311 How to resubmit a podcast feed after being denied

My feed was declined I think because it didn't have artwork, it does now and i have tested it on the validator. But iTuns says the feed has already been submited. How do i resubmit?

The GAM wrote:
im having the same problem now how did you get around it?
I've answered you in your other thread, which since you should have seen my answer above in this thread I needn't have bothered.

Podcast rejected by iTunes as explicit, how to resubmit it?

I created it by dropping a sound file into iWeb and then putting it into feedburner. How do I now mark it as explicit (it's been rejected) and resubmit?
Thanks!
Dan

Which feed was submitted to iTunes? The iWeb one or did you submit that to Feedburner and submit the Feedburner one to iTunes?
If you originally had a feedburner feed and changed the iWeb feed which was submitted to it this wouldn't necessarily change the URL - though it would if you started a new Feedburner account from scratch.
In order to move to a different URL you have to add a tag to the feed - details here:
http://www.wilmut.webspace.virginmedia.com/notes/podcast.html#move
- which you may not find possible in Feedburner. But are you talking about iTunes ratings? If you had a podcast in the Store, and it was removed, then the ratings would disappear with it and changing the URL won't get them back.

How to resubmit failed activity in a BPEL process using Java in 11g

Hi All,
In 11g, is there any API using which we can resubmit failed activity in BPEL using Java.
Thanks,
Vidya

Hello
To assign a header
1. Create a variable of the correct type
2. Click on the invoke/pick/reply or the receive
3. Click on the header tab
4. Select the header
Validate the header after the receive
5. Select the header the varaible and use a validate action.
Best Regards Tristan Hayman

How to resubmit a cancelled apple service request?

I submitted a request to get my iPod nano 1st gen recalled. I got lazy and never sent it in, in time so the status got cancelled. I don't know where to resubmit it, and it won't let me do it again with the serial number. Any help helps ;), thanks.

You will need to call AppleCare.

Podcast removed-How to resubmit?

My podcast, nuTSAck podcast, was removed from iTunes. I got the e-mail saying so, I presume it must have been for offensive material. I have removed all material which could be deemed offensive and would like to resubmit it, but iTunes will not let me as it has already been submitted. Is there any way to resubmit it or get it unblocked? Help would be greatly appreciated as it's a really enjoyable thing to do. We aren't even offensive, anything offensive could only have been in the descriptions. Thanks!

What you have run up against seems to be a minor bug in the automated part of the submission process, whereby re-submitting a previously removed feed results in your being told it's already been submitted.
To get round this you need to make a small change to the title: once it's been accepted you can always change it back.

How to resubmit failed requests

We have some request which entered the "failed" state before approval due to a known bug (14036801). The bug has now been patched, but we would like NOT to have users resubmit their requests, since there are many of them.
I am thus looking for a way of re-sumbitting the failed requests, or to have OIM reprocess them somehow.
I looked for the ORCHESTRATION_PROCESS_ID associated to one of those requests by querying the REQUEST table, and then ran the build-in job "Retry Failed Orchestrations" on that process ID. That seemed to have some effect, as the request successfully went through all approval stages (Template, Request, Operation). But it went no further.
Now the request appears in "Operation Approval Auto Approved" stage (stage #27), but no provisioning process have been started, and probably never will.
I'm asking you gurus if there is a way to move that request out of "Operation Approval Auto Approved" stage and have it spawn the proper provisioning process, as it would normally do. Some APIs? A built-in job? Entering/changing values manually into OIM Database? A combination of them all?
OIM version is 11g BP4 (not R2).
Thanks to anybody who will provide useful infos.
Rpatri

Apparently it is not possible. As per note: 1507086.1
It is not possible to recover/retry from errors and new request has to be created.
When such a failure occurs, the situation has to be carefully checked, because the request might have partially succeeded, and in this case, a new request might not be necessary, or desirable.-Bikash

How to resubmit a podcast

I submitted my podcast, got denied, fixed everything that could possibly be a problem, checked my feed with itunes on my computer and it works.
When I resubmit it to the iTunes store it says its already been submitted.
I did change the URL and still says its already been submitted.
Please tell me what I can do.
Thanks
http://feeds.feedburner.com/echopodmedia/JXXV

You've fallen over a bug in the automated part of the submissions process whereby you are told a feed has already been submitted even if it was subsequently rejected or removed. The workaround is to change the title slightly - you can change it back once accepted provided doing so does not change the feed URL (in your case it looks as if it won't). If you can change the feed filename, and hence its URL, this is also a good idea, as is changing the URL in the 'link' tag (this can easily be changed back afterwards).

How to resubmit 'no success' AE

Hello,
I am trying to figure out how to get the process scheduler to restart / reprocess all of our 'no success' app engine programs.
Has anyone ever had to run a batch job to restart app engines that were once 'no success'?
Any help would be greatly appreciated. Thanks!

I haven't done it before, you should be able to use the ProcessRequest API Object. Here is a link to the PeopleBooks documentation on this object:
https://metamorphosis.cu.edu/CSPeopleBooks/PTools/eng/psbooks/tpcr/book.htm
Take a look at the RunStatus property. You should be able to set it to Queued or something like that. Then, you would use the UpdateRunStatus method to tell PeopleCode to make the change in the Process Scheduler.

Background Processing? how schedule job for "System Error" Message .

Hello everyone,
in sap help i have read.
http://help.sap.com/saphelp_nw04/helpdata/en/5a/f72040599a8f5ce10000000a155106/frameset.htm
PCK> Monitoring>Message Monitoring-->Background Processing
you can schedule jobs for various background processing:
●     Archiving of messages processed successfully
●     Deletion of messages that are not to be archived
●     Restarting of messages with errors
●     Rescheduling of lost messages
can anyone understand this docu?
give me some introduction, how can i define and schedule these jobs ?
thx in advance!!
best regards
Yaning

Background Processing
Prerequisites
You have started the message monitor on the initial screen of the PCK and are in Background Processing.
Features
Archiving
You require two archiving sessions to archive messages:
●     One session to write the messages to the archive
●     One session to delete the persisted messages that have been archived
To do this, you schedule an archiving job, which implicitly schedules the sessions to write to the archive and delete the archived messages.
You can define one or more rules for each archiving job; these rules contain conditions that a message must meet in order to be archived by the job. At least one of the defined rules must be met for archiving to take place.
All information that is displayed for a message in message monitoring is archived, in addition to the audit log for each message.
Deleting
A standard delete job is created automatically. It runs once a day. You can schedule additional delete jobs; however, you cannot define rules for them.
Restarting
Instead of restarting messages with errors manually with message monitoring, you can schedule a job to automatically restart these messages. This is possible for all messages for which the number of defined restart attempts has been exceeded (messages with the system error status).
You can define one or more rules for each job to restart messages; these rules contain conditions that a message must meet in order to be restarted by the job. At least one of the defined rules must be met for archiving to take place.
Rescheduling
A standard job to reschedule messages is created automatically. The job runs once a day and ensures that messages lost as a result of database failure, for example, are rescheduled. You can schedule additional rescheduling jobs; however, you cannot define rules for them.
Thx Aamir.
But I mean the messages with errors in Adapter Engine , not in Intergrations Engine.
the situation is like Naveen Pandrangi's WebLog
II. Errors in Adapter Engine [XI : How to Re-Process failed XI Messages Automatically|XI : How to Re-Process failed XI Messages Automatically]
I
Till now we have seen how to resubmit/restart message that failed in Integration Engine. One a message makes it from Integration Engine to Adapter Engine, the message is flagged as checked in Integration Engine. The status of the message in Adapter engine does not effect the processed state in Integration Engine. Now if this message was asynchronous, XI will by default try to restart the message 3 times at intervals of 5 minutes before the status of the message is changed from Waiting to System Error .
*how can i schedule a job to automatically restart these messages with errors?
best regards
Yaning
Edited by: Yaning Liu on Aug 18, 2008 1:43 PM

Error Type In Integration Engine

Hi All,
Please tell me what type of error/exception can occur in the integration engine? Is it only System Exception that can occur or can Application Exception also occur?
Also please tell me what do you mean by the term SALERT.
Thanks,
Abhishek.

hi abhishek,
I. Errors in Integration Engine
a) qRFC Errors
Often in asynchronous scenarios where inbound queues are used, the queues are set to SYSFAIL status and all the messages in the inbound queue are stuck (not processed). Depending on the status of XI processing queues, we can reset a queueu2019s status and trigger processing of messages.
Manual Resend of messages: Use transaction SMQR or SMQ2 to reset the status of queues. As you can see in the following figure, the queue has been marked with a status sysfail.
To be able to initiate processing of messages stuck in the queue, make sure to set following IS configuration parameter
MONITOR QRFC_RESTART_ALLOWED to value 1
For automatic qRfc failure recovery, schedule the report RSQIWKEX to run periodically. This report enables automatically resets the queues.
b) tRFC Errors
Like qRFC errors one can either manually or automatically initiated processing of messages hanged tRFC calls.
Manual Resend of messages: Use transaction SM58 and check through the list. If necessary, start hanging tRFC calls
under the Edit menu by choosing Execute LUWs.
For automatic tRfC failure recover, schedule the report RSARFCEX for periodic execution.
II. Errors in Adapter Engine
Till now we have seen how to resubmit/restart message that failed in Integration Engine. One a message makes it from Integration Engine to Adapter Engine, the message is flagged as checked in Integration Engine. The status of the message in Adapter engine does not effect the processed state in Integration Engine. Now if this message was asynchronous, XI will by default try to restart the message 3 times at intervals of 5 minutes before the status of the message is changed from Waiting to System Error .
regards
kummari

My older podcast episodes are missing on iTunes.

Just noticed last week that my nine oldest podcast episodes are no longer on itunes. They're alive and well on my blog page so I'm nor sure what happened. Did I reach some magical quota on iTunes? I have no clue how to resubmit or do any of that stuff. Thanks for any help!

iTunes imposes no limit (at least up to 300). Many podcast creation programs or services limit the number of episodes in the feed, removing older ones when this limit is reached. There is usually a setting to increase this number.
However there might be other reasons; but it's not really possible to comment unless you would like to publish the URLs of both your feed and the Store page - this latter can be found by control-clicking on the podcast image (or where it should be) - and choosing 'Copy link'. Please include the http:// in both cases to make the links clickable.

BDC session in the background

How to Resubmit a BDC session in the background

If it is in call transaction use the mode 'N'
If it is session method use the submit the program rsbdcsub via selection screen .
give ur variant name.
Regards,
Venkat
Edited by: venkat reddy on May 2, 2008 7:14 AM

MTL_TRANSACTIONS_INTERFACE 에서 진행되지 않는 DATA 의 RESUBMISSION 방법.

제품 : MFG_INV
작성날짜 : 2004-05-25
MTL_TRANSACTIONS_INTERFACE 에서 진행되지 않는 DATA 의 RESUBMISSION 방법.
=============================================================
PURPOSE
MTL_TRANSACTIONS_INTERFACE 에서 진행되지 않는 DATA 의
Resubmission 방법.
Oracle Inventory Management 11.5
Problem Description
MTL_TRANSACTIONS_INTERFACE 에서 진행되지 않는 DATA 를 Resubmit 하여 처리되도록한다.
Workaround
N/A
Solution Description
1. Application에서의 Resubmission
Navigation Inventory:Transactions:Transaction Open Interface
해당 Record의 Submit 의 check box를 선택하여 저장한다.
2. SQL*Plus 에서의 Resubmission
SQL>Update MTL_TRANSACTIONS_INTERFACE
Set PROCESS_FLAG = 1,
LOCK_FLAG = 2,
TRANSACTION_MODE = 3,
VALIDATION_REQUIRED = 1,
ERROR_CODE = NULL,
ERROR_EXPLANATION = NULL
Where PROCESS_FLAG IN (1,3);
Reference Documents
Note:209809.1 - How to resubmit unprocessed records stuck in the
MTL_TRANSACTIONS_INTERFACE table

How to resubmit PO

Similar Messages

Maybe you are looking for