How to Retain formula with SpreadSheet Services

Hi,I have a problem for use a SpreadSheet Services 6.5.2 on Excel Application.There isn't Formula Preservation in "Men? Options" !How can Retain a Formula?Can you Help Me?, please!!!

I don't believe that version of ESS support formula preservation.. One workaround may be to retrieve your data on a background sheet and link formulas to cells on a 'display' sheet.. BTW, I personally hate this technique as it does introduce a much higher probability of errors in your spreadsheet; a professor at the University of Hawaii has done extensive studies on spreadsheets and found that about 50% of all spreadsheets contain errors, so if you use this approach be very careful.Tim TowApplied OLAP, Inc

Similar Messages

Iphone disabled, i cannot access the serial number to get support , how do i unlock with no service provider?

iphone disabled, i cannot access the serial number to get support , how do i unlock with no service provider?
i just got my iphone i set it up with icloud but didnt sync with itunes yet, i dont have a service provider yet either but i have been locked out for foregetting my passcode which i now remember ...... also i have tried calling apple support but get a busy signal after going through prompts.........PLEASE HELP

http://support.apple.com/kb/ht1212

How to use ZendAMF with multiple services?

I followed Mihai Corlan's tutorial (http://corlan.org/2008/11/13/flex-and-php-remoting-with-zend-amf/) to create a remote service with Zend AMF, and it works great.
But, I can't figure out how to use multiple RemoteObjects. I keep getting the infamous:
faultCode:Client.Error.DeliveryInDoubt faultString:'Channel disconnected' faultDetail:'Channel disconnected
before an acknowledgement was received'
I set up my second RemoteObject the same way that I set up my first one. But, I can't get it to work.
Any suggestions? Has anyone seen examples of multiple services being used?
Thank you!
-Laxmidi

I made a stupid php error.
If you can do a single remote, you can do multiple ones. It's straightforward.
-Laxmidi

How to use JAXB with web services

Hi All,
I am new to JAVA WS and read the sun jee tutorial on JAX-WS and SAXB. Now I can create simple JAX-WS passing simple parameters. Now I want to create a service which take java bean as a parameter or returns a java bean (complex type). I think this is where JAXB should come. However I can understand JAXB seperately, but still could not find how JAXB is work together with my web service. Could someone help me or point to a simple tutorial/example on using JAXB with JAX-WS. Or simply a tutorial that use Complex data type in JAX-WS.
Thanks
Nalaka
Edited by: nalakayoyo on Mar 27, 2008 11:39 PM

Hi,
When you are using JAX-WS, there is a tool wsimport, with which you are going to generate the artifacts required to implement the web service.
When you pass the WSDL as a parameter to the wsimport tool, it will be create the required beans also(JAXB Objects).
So need of any other external implementation of JAXB when you are working with JAXWS
Thanks,

How do I speak with customer service above 'manager' title-- Incorrectly charged $280 and finally refunded most of it after many hours, disconnects and transfers!

I have been a Verizon Wireless customer for 11+ years. My monthly payments are usually in the $275 range which includes usage for phones and 2 tablets for my family. That's a lot of $ each year!
I am self employed. My biz slows considerably in the winter-- income is slashed. When I realized I couldn't keep the account up this winter-- with an increase in excessive travel costs for my business due to a new long commute for work, and business being down considerably during winter months-- I called in and requested Verizon to suspend service without billing until I can pay my bill in full. They said sure. We worked together to find a workable payment arrangement, which I had to modify a couple of times, but all in all it worked. Thank you Verizon! But then, I went online to pay the amount agreed to. Several days later, I realized Verizon program apparently has a glitch-- it took the full amount due ($563) rather than the agreed amount ($63 then, with agreement to further pay $250 end of April, $250 end of May). I called immediately. Verizon refused to credit back. My bank researched the situation and resolved in my favor :-) Shame on Verizon. You had an opportunity to honor your loyal customer and you failed.
Worse, this created a snowball effect of further charges. Shame on Verizon. Because the account was considered "paid in full", it automatically turned my account back on. When I realized this, I called in and said TURN THEM BACK OFF WITHOUT BILLING!!! They turned them off. Good job Verizon!
I called again, to be absolutely certain the account was turned off 'without billing'. I was assured they were. I had also asked to ensure there would be no disconnect/reconnect fees. I was assured. Good job Verizon! (I thought...)
Just got my bill. It should show $563 (because when I was credited back, it was the entire amount; instead of minus the intended amount of $63).
The bill shows $851.24. Shame on Verizon!!!!
I have spent many hours on the phone with Verizon. I have explained dozens of times, to dozens of representatives. I have been transferred over and over, disconnected over and over. Spoken with representatives, who transferred to supervisors, who eventually one transferred to her manager. The manager stated she has zero power over her supervisors- that if the supervisor wont credit $, that her hands are tied. I have made 6 calls to Verizon since 7:30 this morning, which means I was disconnected 4 times just today. There were 7 calls yesterday, I believe all of those were disconnected as well. I was not yelling or abusive to the staff-- the disconnects occurred during lengthy holds during transfers.
FINALLY, I was connected to JUST A REP who actually took care of me!!!! Out of the $280, I still have $45 left in incorrect charges. I was so relieved to finally get so much removed that I accepted gratefully. I believe the other $45 should also be removed, but I need to rest. Verizon, you really need to give your representatives more power, and more understanding of people-- I have paid thousands of dollars to your company over 11 years. Is it really better business sense to anger a customer of 11 years at approx. $275 per month than to continue a positive relationship with them and give them back what they believe is theirs-- $280 of incorrect charging??? Is $280 'once' more important than $275 'monthly'? You need to look at the big picture. KUDOS to Andre (removed). That representative rocks and deserves a raise for saving your company a $275 monthly customer!
To all the rest of your staff-- including and especially to 'Acacia' (removed)-- get a new job-- you serve little purpose to your customers, other than angering us further. Acacia told me that her manager (Marissa) does not deal with customers... but that as Operations Manager, "Marissa" serves other purposes. Telling your customers that they are at the end of the line speaking with you (Acacia's words) is the WRONG thing to say. If YOU cannot help them because "your hands are tied", get us to someone who can. As you can see, I do not give up. But many do, and perhaps that is why your staff say these things, to get us to stop fighting for what we believe is right.
If you are a Verizon customer-- do not give up-- stand up and fight for what you believe in. It is YOUR money-- spend it wisely. Dont accept yield signs disguised as stop signs. Yield for the moment, and get back on the road. YOU are your best advocate--- you can always count on YOU.
Private info removed as required by the Verizon Wireless Terms of Service
Message edited by: Admin Moderator

The charges occurred when the account was automatically re-activated due to the over-riding of my payment amount online. I had a pmt arrangement to pay $63 that week, but the system over-rode and took out the entire balance due. About gave me a heart attack. When the account was fully paid, its an automatic process to re-activate the account. I have no idea my phones were back on until my daughter said a text and phone call came through. I called Verizon to ask what happened, and asked that they shut them back off for me. But that process accumulated more charges of $15 per line to reactivate and then again to suspend services again. Then they charged an NSF fee for my bank taking back the funds that their system overrode from $63 to $563. If it had withdrawn the amount I had inputted, there would be no funds to pull back. The charges were ridiculous... fee after fee after fee resulted from the over-riding glitch in the system. I dont remember all of the fees, but they added up FAST! All were a result of paying the account online, with them over-riding the payment amount.

How to create formula with lookup table

Hi, I would like to convert formula in the below to labview format, any idea how this could be done easiest way?
I'm planning to use formula node but I'm not not sure about how to use lookup table inside the formula or is it even possible?
br, Jani
        Dim dblLookUp(,) As Double = New Double(3, 1) {{4, 4}, {10, 200}, {60, 3000}, {100, 7000}}
        If dblAbsValue >= 0 And dblAbsValue <= dblLookUp(0, 0) Then
            dblk = dblLookUp(0, 1) / dblLookUp(0, 0)
            dblValue = dblAbsValue * dblk
            'lblMode.Text = 1
        ElseIf dblAbsValue > dblLookUp(0, 0) And dblAbsValue <= dblLookUp(1, 0) Then
            dblk = (dblLookUp(1, 1) - dblLookUp(0, 1)) / (dblLookUp(1, 0) - dblLookUp(0, 0))
            dblValue = dblk * dblAbsValue - dblk * dblLookUp(0, 0) + dblLookUp(0, 1)
            'lblMode.Text = 2
        ElseIf dblAbsValue > dblLookUp(1, 0) And dblAbsValue <= dblLookUp(2, 0) Then
            dblk = (dblLookUp(2, 1) - dblLookUp(1, 1)) / (dblLookUp(2, 0) - dblLookUp(1, 0))
            dblValue = dblk * dblAbsValue - dblk * dblLookUp(1, 0) + dblLookUp(1, 1)
            'lblMode.Text = 3
        ElseIf dblAbsValue > dblLookUp(2, 0) And dblAbsValue <= dblLookUp(3, 0) Then
            dblk = (dblLookUp(3, 1) - dblLookUp(2, 1)) / (dblLookUp(3, 0) - dblLookUp(2, 0))
            dblValue = dblk * dblAbsValue - dblk * dblLookUp(2, 0) + dblLookUp(2, 1)
            'lblMode.Text = 4
        Else
            dblValue = dblLookUp(3, 1) '* Math.Sign(dblValue)
            'lblMode.Text = 5
        End If
        Return dblValue * intSign
Solved!
Go to Solution.

Hello janijt,
You can definitely use formula node for it. What you would do is to create a constant array for the lookup table.
Here's an implementation in MathScript Node
Andy Chang
National Instruments
LabVIEW Control Design and Simulation

How fix my iphone4 with no service

how fix my iphon4 no service ????/

Turn it on? Pay your phone bill? Move to an area where you actually get cellular coverage?
Really... we need just a wee bit more information if you expect an intelligent response.

How to integrate forms with web services in EBS

Hi All,
I have tried to integrate Oracle forms with webservices.
I have added the location of jar file to classpath in default.env file in EBS.
While running form from E Business Suite i am getting following exception
Exception: java.lang.Exception: java.lang.NoClassDefFoundError:
Please help me in overcoming this problem.
Thank you,
KS

Hello,
This is not the EBS forum but the Forms forum.
<p>Anyway, did you read this article ?<br>It contains all the necessary details/steps</p>
Francois

DRM Integration with Shared services

Hi,
Could someone help me how to integrate DRM with Shared services? Is there any document which helps me with the same?
Thanks
Arathi.

Hi Arathi,
You'll be delighted to hear that I found a solution to your question.
1. Create a user in DRM and select to manage user in "Active Directory", LDAP or NTLM.
2. Create the same user in Shared Services (same name u wrote in DRM), give it a password then you're done.
3. When you log into DRM, it will use the shared services password.
It kinda bothered me that's why i gave it a thought and did a lil bit of reading to find it out. Hope you get it right.
Regards,
deep

Send Mail With SMS Service

Hi,
Pls tell me how to configure sendmail with SMS Service.
Regards,
Ramana
[email protected]

Hi all
Thanks for your reply, already tried this methods, Its not working for my requirements. Because my attachment is can be any type like pdf,doc,txt,xls,jpg,.
And also the Utl_mail is very slow. Its using RAW type.
I can use the javamail package to solve this problem, this javamail package needs to download into server from there you can attach thus documents into mail. But I want fetch the documents and ate the same time I want attach to a mail. Like yahoo attach or msn attachment.
Thank you,
Selvam

In iWork 09, Numbers, how do I replace a formula with calculated results for a whole column?

I have a rather large Numbers spreadsheet. I have used a formula to create a new column of information. I now want to replace the formula with the actual results calculated by that formula for each cell in that column, so that I can delete some of the other columns. How do I do that?

Copy the cells with the results, then select the destination cell, and use the menu item "Edit > Paste Values".
You may want to paste to a different location in case you need the source data or formulas in the future.
Regards,
Wayne

Spreadsheet question: How to apply formula to entire row?

I am updating cells which already contain formulas. Can I select the entire row, and apply an additional formula (i.e.: 1.5*) or do I have to do it individually for each cell (there are hundreds)? I need the original formulas to stay in place, and they vary.

Hi Pamela,
Welcome to Apple Discussions and the AppleWorks forum.
(The following was begun before Niel's post, and completed, with a few breaks, some time after it. It addresses a shortcoming with the solution suggested above, so I haven't altered it beyond adding this paragraph.)
I'm not certain as to exactly what you're requesting here. Do you mean you currently have the same formula in these cells (eg. =(A1-A2) ) and you want to change all of those formulas to (same eg. =1.5*(A1-A2) ). That's cetainly possible if the formulas are in contiguous cells (or in separater groups of contiguoous cells). For the example, select the first cell containing the formula and all the others contiguous to it. Make the change in the entry box, then press command-R to fill the changed formula to selected cells in the same row and to the right, then command-D to fill the formula to all selected cells below the row containing the edited cell.
OTOH, if you want to make the change to separate (ie. non-contiguous) cells, or to cells which do not contain what's essentially the same formula (with only the cell references changed to reference a cell located in the same relative position), I don't see any way to do it directly within the spreadsheet.
If the existing formulas are such that you can write a description of where to insert the change, it may be possible to make such a global change through an AppleScript, or through transferring the spreadsheet content to a word processing document, using Find/Change to make the revisions there, then transferr the result back to the spreadsheet (or more cautiously, to a new spreadsheet).
An AppleScript is someone else's territory. Here's how it could be done using the word processor.
For the example, I'll assume you want to change ALL formulas in the spreadsheet by adding the instruction to multiply the (result of the) current calculation by 1.5.
• Open the spreadsheet.
• Go Options > Display...
• Check the box "Formulas", Click OK.
• Select ALL of the cells containing data or a formula.
• Copy.
• Open a new word processing document.
• Paste.
• Press command-F to open the Find/Change dialogue.
• Enter "=" in the Find box, press tab, enter "=1.5*" in the Change box (no quotes in either case).
• Click Change All. OK the two alerts that follow. Close the Find/Change dialogue.
• Press command-A to Select All. Copy.
• Open a new spreadsheet document.
• Paste.
• Done.
Limitation: This will work only if the amended formula will give the expected result. Consider the example above, =(A1-A2) with 2 in A1 and 1 in A2.
As written, the original formula ( =(A1-A2) ) returns a result of "1", and the amended formula ( =1.5*(A1-A2) ) returns the expected result 1.5.
But it's unlikely the original will have included the parentheses,as they're not necessary to a correct result.
If the original is =A1-A2, the result is still 1, but the amended formula ( =1.5*A2-A1 ) will return the result "2", not 1.5.
Revising the beginning of the altered formula to add an opening parenthesis is easy. The difficulty here is telling Find/Change (or AppleScript) how to add the matching closing parenthesis to fomulas but not to the contents of cells containing labels, other text, or nothing at all..
*An alternate approach:* Rather than revising the existing spreadsheet's formulas, this method transfers the labels and results to a new section of the spreadsheet, multiplies the original results by 1.5, and displays the new result.
For discussion purposes, I'll assume the current spreadsheet contains 25 columns (A..Y) and 100 rows (1..100) of data and labels.
• Go Format > Document...
• Change the default 40 cells wide to 52 (or enough to accomodate twice as many columns as you have containing data now).
• Click OK
• Select a cell to the right of the cells containing data in the current spreadsheet. (For the example, choose cell AA1)
• Enter the following formula:
=IF(ISTEXT(A1),A1,IF(ISBLANK(A1),"",A1*1.5))
• Select the block of cells extending right and down from AA1 that matches the size of the original block (for the example, AA1..AY100).
• Fill the formula Right (command-R) and Down (command-D).
The formula will copy the text from cells containing text, keep cells blank ("") where the originals were blank, and enter the results, multiplied by 1.5, for cells where the originals contain a formula with a numerical result or a number.
Limitation: The formula does not distinguish between an entered number and one generated by a formula contained in the referenced cell. All numeric values will be multiplied.
Regards,
Barry

Anyone know how to contact anyone in Verizon headquarters? Since I'm not getting anywhere with Customer Service

I'd like to express how unsatisfied we have been with Verizon on an issue that has been ongoing now since March 14, 2014. It involves an upgrade on one of our lines. After all these months, phone call with customer service, Tech support, and visits to a Verizon stores, I would hope that there are ample notation on our acct but since I've had to explain the situation on a bi-weekly time frame, I would assume that no one has documented any contacts.
We've been with Verizon for few yrs now and I have always been very satisfied with Verizon who, up until now , always provided excellent customer service in their knowledge, concern, and customer satisfaction. But I have to say, every positive outlook I've had with your company has been wiped clean with the worst service we have received in the last few months.
We upgraded my daughter's phone on 03-14-14 with a Samsung Galaxy Mini from an Iphone 4s. Within 24 hrs, the phone failed. After 2 visits to a Verizon store the next day which took 6 hrs, we still had to return the next day to speak to a manager. The 2 stores advised us to make a CLAIM on the defective phone thru our insurance plan with Verizon. A CLAIM on a 24 hr old phone!! A 3rd visit with a manager finally convinced him to replace the phone with another new phone at the store. Within 2 weeks - issues began to occur with the replacement phone. Several visits more, several calls more with Customer Service, several calls more with tech support which adds up to soooo many of our time taken up to simple have temporary "fixes" is outrageous. If I billed Verizon for my time, perhaps the situation would have been resolved more quickly. Each visit lasts approx 2 hrs, each phone call approx 1-1 1/2 hrs. We are talking at least 2x a month for the course of 5 1/2 months. Plus the time it takes to get the phone back to where she needs it - contacts, apps, internet.
Not once were we offered a new phone or replace the phone. Not until today. Replace the phone with the same phone that my daughter has grown to hate. So basically a 3rd phone - same phone. She is not interested in this phone any longer. She dealt with this phone model for far too long.
Today we were offered to replace the phone with same phone, or pay for a refurbished Iphone 4. So basically she would be going back to her original Iphone 4s before the upgraded WITH a cost. So her upgrade was wasted, we'd paid over $200 for a defective phone, and would need to pay for an even older model Iphone 4 and have to pay for it. Why wasn't she offered a different phone within those 30 days after the upgrade and 6 visits?
Every rep at the stores, every rep in tech support would provide a different reason for the issue. Finally, tech support advised not to download apps. WHAT GOOD IS A SMARTPHONE IF YOU CAN'T HAVE APPS??? We are talking about a 20 yrs college student who attends school in another state. Do you know the trouble she has to go thru to visit a store? To find 2 hrs between being a full time student with 2 jobs to sit on the phone with a tech support or go to a Verizon store? Once-ok Twice-maybe BUT for 5 months?
She's not eligible for an upgrade. She will be stuck with a phone that she had grown to hate. And I with customer service which I've grown to hate.
Finally, The Edge. Trying to find a way to make my daughter happy, I spoke with 4 representative today about the Edge. Each rep gave me 4 different information. 1st rep advised Edge phone could not be used on another line so I could not use a line eligible for the Edge and give that phone to my daughter since she isn't eligible for the Edge. 2nd rep advised that although new phone thru edge must be used by same number that it was eligible for, we could use the current phone o that line for my daughter. My son currently has an Iphone 5 and is eligible for the Edge early upgrade. He would not have to return his Iphone 5 so my daughter could use it. However, all the lines would have to go to the More Everything Plan and share the Data between all our phone lines. 3rd rep advised the cost would almost double from our current $358 to go to the More Everything Plan so suggested to have 2 accounts vs just 1. 4th rep advised not every line needs to go the More Everything Plan, we could not keep the current phone, and my daughter could get a replacement phone but same phone or made exception to offer the Edge early upgrade to my daughter but only after we go thru the replacement program because the phone we send to Verizon has to be in good working order/no defects.
After 5 1/2 months, it is now Verizon that is indicating that we have a defective phone and can't accept it thru the Edge program or we would get billed approx $299 for a defective phone. After 5 1/2 months of me calling in about a defective phone that not one rep replaced because they "fixed" the problem ( by the way, a temporary fix is not fixing, if it was fixed I would have made those calls today or writing this email), I am now being told her phone is defective. She advised to get a replacement phone first, return the old phone, activate the new phone, then call in to get the Edge early upgrade. So my daughter would have to do all this, plus add contacts back, apps and whatever else she needs to use her phone just to turn around a couple weeks later and do it all over again with the new phone thru the Edge program. Once again, we are the ones having to be inconvenienced and go thru all these steps. Did I mention she is going to be studying abroad in Italy beginning Nov? So the idea of having to wait 2-3 weeks for a new phone and having only a week or 2 to test the phone to make sure it's working properly before she's out of the country doesn't sound appealing to me. Verizon has made us have a defective phone for 5 months advising it's in good working order after each and every "fix" but Verizon will not accept that phone if returned in the same condition as a phone in good working condition. Do you see the irony in that?
I have reached my limit and after 5 yrs of my brother in law trying to convince us to switch to AT&T where he works in their Corporate Office, I can honestly say I will not be sad to leave Verizon. Especially when one of your reps simply provided me with the contract end dates to provide to AT&T because they offered to buy out our contract. No effort in customer retention what so ever. That was a phone call on Thursday.
And yes, one of your tech reps tried to convince me of all the hassle it would be to switch and time AT&T would take to buy out our contracts but honestly it was the pot calling the kettle. I am not in the position to discuss hassle and time after 5 months of getting that with Verizon. Did I mention it's my brother in law so we would be getting special treatment and no out of pocket expenses to switch. It was my loyalty and satisfaction with Verizon that has kept me from switching all these years. Something Verizon clearly does not appreciate.
So can you guess where I am with confidence that your customer service department is knowledgable about the plans/offers? Where I am that I can trust what I'm being told?
I know this email is confusing and really hard to understand...perhaps now you will know how i've been feeling--lost and confused with all the mis-information, with a hit and miss phone, and out of time with all the 1 1/2 hr to 2 hrs EACH wasted on this issue.
On top of all this, I can't even find out how to file a complaint with anyone higher up than Customer Service.

Jneklason wrote:
~snip~
I know this email is confusing and really hard to understand...perhaps now you will know how i've been feeling--lost and confused with all the mis-information, with a hit and miss phone, and out of time with all the 1 1/2 hr to 2 hrs EACH wasted on this issue.
On top of all this, I can't even find out how to file a complaint with anyone higher up than Customer Service.
I hate to tell you this, but you didn't write an email. You wrote a discussion post on the Verizon Wireless Community forum which is a public peer to peer forum. Unfortunately since you didn't mark your post as a question, the VZW reps that roam this community won't ever see your post. Before you re-post it, don't. Duplicate posts get removed from the community.
I see there were several missteps both by the reps and yourself in your post. First you should have insisted on returning the phone within the 14 day return policy period. Second which Samsung Galaxy mini model did you purchase? The S3 mini or the S4 mini? Did you do any research prior to deciding on this device. The reps at that time deflected the easiest course of action, by trying to get you to replace the phone under insurance instead of returning the phone. The Early Edge payment option requires the current phone on the line using the early Edge must be returned to Verizon Wireless. Did you once considered going to a third party site like Swappa to purchase a gently used device for your daughter?

How to Virtual cube with services works

Hi,
How to Virtual cube with services works.
can anyone provide me a realtime scenerio.
if possible provide some code.
Thanks,
cheta.

For which functinality you are trying to create VC with services.
This is mostly used in SEM BCS.
You have to create cube similar path like normal cube, but select in the properties virtual cube, services.
There is a standard FM which connects the Virtual cube to the required cube in BCS. ( this is done by BCS data basis generation function) and we have to do nothing for FM.
In BCS we use virtual cube only for reporting purpose, since standard BCS cube cannot be used for reporting. hence what we do is create another virtucal cube very smiliar to BCS cube.
Then both the Virtual cube and BCS cube are connected by standard FM.

HT4437 I want to develop a software with AirPaly service for business things. How can I get the permission from Apple?

I want to develop a software with AirPaly service for business things. How can I get the permission from Apple?
This one is used in Windows laptop, and I want it support AirPlay service, but Apple doesn't publish the AirPlay protocol.
Many thanks.

Create a developer account, then access he developers forums and see if you can find the information that way
The other option would be to simply contact Apple directly.

How to Retain formula with SpreadSheet Services

Similar Messages

Maybe you are looking for