How to retain new line characters when using Node.getNodeValue()

Hi,
I have xml as shown bellow
*<DETAILS>*
this is line one
this is line two
thi is line three
*</DETAILS>*
when I parse this using dom( Node.getNodeValue() ), the value I am getting is as shown bellow
this is line onethis is line twothis is line three
but I wanted as is I have in my xml i.e,
this is line one
this is line two
this is line three
( to show that as is in HTML page)
can some body help me ??
Thanks in advance .

Hi,
You could try this:
replace(your_data, chr(10), '')

Similar Messages

How to support non alphanumeric characters when using WORLD_LEXER?

BASIC_LEXER has an attribute of printjoins which we can specify the non alphanumberic characters as normal alphanumberic in query and included with the token. However, WORLD_LEXER doesn't have this attribute. So in order to use some non alphanumberic characters and treat them as alphanumberic characters in Oracle Text Index, such as ><$, what should I can?
Thanks in advance for any help.

I use WORLD_LEXER to create Oracle Text Index to support UTF-8.
Below is the script to create table and index:
REM Create table
CREATE TABLE my_test
( id VARCHAR2(32 BYTE) NOT NULL,
code VARCHAR2(100 BYTE) NOT NULL,
CONSTRAINT "my_test_pk" PRIMARY KEY ("id"));
REM create index
exec ctx_ddl.create_preference('stars_lexer','WORLD_LEXER');
exec ctx_ddl.create_preference('stars_wordlist', 'BASIC_WORDLIST');
exec ctx_ddl.set_attribute('stars_wordlist','substring_index','TRUE');
exec ctx_ddl.set_attribute('stars_wordlist','PREFIX_INDEX','TRUE');
-- create index for Table corrosion level
CREATE INDEX my_test_index
ON my_test(code)
INDEXTYPE IS CTXSYS.CONTEXT
PARAMETERS ('LEXER stars_lexer STOPLIST stars_stop WORDLIST stars_wordlist SYNC(EVERY "SYSDATE+5/1440") TRANSACTIONAL');
INSERT INTO my_test('1', 'English word1');
INSERT INTO my_test('2', '违违');
INSERT INTO my_test('3', '违违&^|违违');
When I query:
select * from corrosion_levels r where contains(r.CORROSION_LEVEL, '{%违${|违%}') > 0
ID CODE
3 违违$(|违违
2 违违
Actually, the result what I want is: 3 违违$(|违违
So the requirement is that all non-alphanumeric characters should be treated as normal alphanumeric charcters. Please tell me how to implement it.

How to find a line number when using cfinclue

Hi, I have a cfset causing an error on line 143 the problem
is that the index.com is made of includes, how do I find which
include CFSET is causing the error (the error code doesn't include
the text that is making up the error.... only says coldfusion was
looking at http - which I have in many places...) dreamweaver isn't
including the documents to look up their code either....
Thanks

Sometimes it's quicker to just do the dumb thing. Number of
lines before first include + number of lines in first include +
number of lines between first include and second include + number
of lines in second include + ... till you get to around 147. I say
"around" because you only have to know you're, say, between lines
140 and 155. Your error message should give you a clue which line
is the likely culprit.

How to add new line item using BAPI BAPI_CONTRACT_CHANGE for contract-ME32K

HI Experts,
how to add new line item using BAPI: BAPI_CONTRACT_CHANGE for existing contract.
Requirement:
Already the contract having two line items using ME31K.
Custom program has to add new line items in existing contract.
Thanks,
Sendil

I got the solution:
We can do like this:
1. Get all details using details, BAPI_CONTRACT_GETDETAIL.
2. After getting results, append new line item. Then use your BAPI.
Check this posting program.. where this bapi is used, use the same coding technique.
IDOC_INPUT_PURCONTRACT_CHANGE

How to add a new line item when i click on UPDATE in orderpage B2B webshop?

Hi Gurus,
I need to add a new line item based on some condition when i click on update in the order page in b2b web shop. Is there any way to pass some parameters to the BADI crm_isa_basket_items and create a new line item when i update? If so can you please tell the parameters that i need to pass to the badi.
Any help will be highly appreciated!!!!!
Thanks in advance,
Lakshman.

You can put condition when you call java script function while clicking on "update" button.
On order.jsp update button call "submit_refresh()" java script function. You can check your condition over here.
You can find this function in "orderTools.js" file.
And when you enter item in last line on order page and click on the update button it will automatically add new empty lines on your order page as per your selected new line items from drop down box.
Or may be you can call your custome action class when you click on update to check particular condition.
I hope it will help you.
Thanks and Regards.
eCommerce Developer

How to print new line in webdynpro

Friends,
I want to print a success message in new line, the below shown is a one singe line and want to split two lines.
I used this:
wdComponentAPI.getMessageManager().reportSuccess("Example : this is the test message i would like to print in two lines, some how it is not working please help me how to "+
"/n/n print this in two new lines.")
when i execute the above code it is displaying on screen as succsess message as below shown in one line:
Example : this is the test message i would like to print in two lines, some how it is not working please help me how to print this in two new lines.
But my requirement expecting some thing below shown:
Example : this is the test message i would like to print in two lines, some how it is not
working please help me how to print this in two new lines.

really? how? Ó.o

How to make new line in JButton.setText()?

how to make new line in JButton.setText()?
I want to set the text of jbutton in tow line ,as follows
| jbutton-line1 |
| xxxxxxx-line2 |
i konw i can jbtton.settext("<html>line1<br>line2</html>");
but i find it's ugly using html,
is there anyother way to create new line in JButton's Text

As for the above comment....
I thought the question was well purposed. Using HTML was not acceptable in this instance, which was made clear, so why critisize his comments? "Using HTML" is a poor solution, it does NOT work in many instances due to browser, OS variations. Usually the "common answer" is never a COMPLETE answer.
Possible Solution:
Use JLabels to render the text on the button.
import javax.swing.*;
import java.awt.*;
public class ButtonMaker {
public static void makeButton(JButton jb, String[] titleList) {
jb.setLayout(new FlowLayout());
for (int i = 0; i < titleList.length; i++) {
JLabel tmpLabel = new JLabel(titleList);
tmpLabel.setForeground(Color.black);
jb.add(tmpLabel);
public static void clearButton(JButton jb) {
Component[] cList = jb.getComponents();
for (int i = 0; i < cList.length; i++) {
if (cList[i] instanceof JLabel)
jb.remove(cList[i]);
Known Limitations:
1. Flowlayout does not work well with single line text buttons... perhaps another layout manager may work better for various buttonsizes-linenumber combos.
2. Mac OSX : The default UI for Mac OS X (and above it seems), is to have rounded edged buttons. These rounded edges are destoryed when using JLabels, leaving a square, blocky button in its place.
POSSIBLE SOLUTION:
(this is ugly and time consuming)
- create images of the button with text on them.

New line character when writing to a file

Hi,
I am relatively new to the whole logging aspect in JDK1.4, so this is all what I am trying to do. I have setup a logger , using the standard FIleHandler. This handler is using a custom formatter which I have written.
My formatter is very simple and the method format returns
public String format(LogRecord record)
"LogRecord info: \n" +
"Level: " + record.getLevel() + '\n' +
"SourceClassName: " + record.getSourceClassName()+ '\n' + "SourceMethodName: " + record.getSourceMethodName() + '\n' + "ThreadID: " + record.getThreadID() + '\n';
now my problem is that the File that all this gets written into does not get these new line characters, instead it has a weird symbol. I guess the \n is not being recognised correctly.
Does anyone know how to fix this.
Thanks in advance
Parul

sorry about that.. I fixed it, I just used System.getProperty("line.separator");

Finding New Line characters in string

Hello.
I have a textstring in which there are New Line characters. These cause problems when inserting the data.
An example is as follows (assume a table test exists with one column col1 VARCHAR2(2000):
CREATE TABLE test (col1 VARCHAR2(2000));
INSERT INTO test (col1) VALUES ('first line
second line');
INSERT INTO test (col1) VALUES ('first line' ||
chr(10) ||
'second line');
The first INSERT will fail but the second will succeed.
I want to find and replace these characters programatically in PL/SQL.
How can I edit a textstring in PL/SQL and replace the new line characters with ||
chr10) ||?
/Lars

How about this:
declare
v_oldstring VARCHAR2(50) := 'Line1'||chr(10)||'Line2'||chr(10)||'Line3';
v_tmpstring VARCHAR2(50);
v_newstring VARCHAR2(50);
begin
dbms_output.put_line(v_oldstring);
select replace(v_oldstring, chr(10), '''||chr(10)||''')
into v_tmpstring
from dual;
v_newstring := ''''|| v_tmpstring || '''';
dbms_output.put_line(v_newstring);
end;

Long Message - how to preserve new line entry

My TIP message is defined in Oracle Applications. It contain few sentences and each one starts on the new line. I would like to preserve this formatting while using it as a Long Tip or even a text on the page. It looks like the new line characters are ignored and the message displays as one line. I tried <br> and /n but none of the above works.
Is it possible? Does anyone has an idea how to do it?
Tomas

As far I remember, there is a work around,Just try it and update the thread. I remember doing this long time back. Actually in html &nbsp stands for 1 blank space.
As you want the second line to start with new line put as many &nbsp, that formatting automatically puts the furthur message in second line.
Try this, i hope this should work.
--Mukul

How to write new line on resource file.

Hello Everyone,
Can you please help me add new row on resource file, here is the code i have used to read my resource file.
I have no idea on how to add new line... Please help
private void btnBrowse1_Click(object sender, EventArgs e)
BrowseFile();
//versionIncrement();
if (txtInputfile.Text.Length > 0)
PathSelection = txtInputfile.Text;
oDataSet = new DataSet();
//now am reading the files fro the path that is selected
XmlReadMode omode = oDataSet.ReadXml(PathSelection);
for (int i = 0; i < oDataSet.Tables[2].Rows.Count; i++)
string comment = oDataSet.Tables["data"].Rows[i][2].ToString();
//the elements array contain all the columns filled
string[] elements = comment.Split('-'); //when it reaches the comma, it will jump to the next line
string font = elements[0]; //Font
string datestamp = elements[1]; //DateStamp
string commentVal = elements[2]; //Comment
string[] row = new string[] { oDataSet.Tables["data"].Rows[i][0].ToString(), oDataSet.Tables["data"].Rows[i][1].ToString(), font, datestamp = DateTime.Now.ToString(), commentVal };
Gridview_Input.Rows.Add(row);

Hello
Sitholimela,
>> Can you please help me add new row on resource file, here is the code i have used to read my resource file.
From your description, it seems that your resource file is a XML format file, if so, you could also have a try to use
LINQ To XML which is easy to operate the XML file to add new row to your resource file, and here is an example to show how to add a new element/row to the specific tree:
Linq to XML Add element to specific sub tree
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to print new line in jsp page

hi
how to print new line in jsp page
thanks

\n - new line character is in java specific not HTML
specific.Well, if the correct line separator sequence (by far not always \n) would be used, it does add a new line to the HTML output. Too bad that you don't want to see HTML but formatted text. The BR tag is a formatting element for the displayed text, not a line break in HTML. ;)

How to insert new line in the copied schema with transaction code PE01?

Dear Experts,
I have copied HKT0 to ZKT0 , i want to insert new line between line 150 and line 160 in ZKT0, I don't know how to insert new line 160, who can tell me ?
Looking forward to your reply.
Best Regards,
Merry

Hi,
1. Open your schema,
2. In first colume "Line" select line where you want to add new line,
3. Replace first value in the column field (that indicates number of line) with character I (means insert),
4. Press enter
The line will be added. The same way you can add lines to PCR.
To delete use character D.
Cheers

How to add new line in message on my S890

My stock keyboard in Lenovo S890 doesn't have enter key, is this normal ? How to add new line ?
However this happened only in messages, while using whatsapp the enter key present.

Hi,
the fact that your question is posted in Order Management section, does the move order automatically generated by OM?
nevertheless, i don't think you should (or allowed, in this case) to add a new line in transact move order. Transact move order only queries (not create records) the move order lines eligible to allocate and transact.
So, I don't see why you need to add a new line in transact move order.
You can, however, add a new line in the allocation of the lines, where for instance, you need to have half of the line allocated to one locator, and the other half to another locator
Thanks

How to insert new line break in XSLT mapping

Hi experts,
I am doing file to mail scenario, i am sending the text file as an attachment using reciever mail adapter.
I did everything, i can able to send the mail with text file attachment, but with in the file i got multiple rows, i need to put line break in XSLT mapping.
I did use following statement but it is inserting small rectangle between the records, the records are not separating with new lines, all are in one line.
<xsl:text>*#xA;</xsl:text>
note: in real coding replace * with &
Can anyone suggest me how to insert new line in XSLT mapping.
My XSLT mapping as look like:
<?xml version='1.0'?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:ns0="http://www.Coj.co.za/SapIsuToABSA/DirectDebitFile">
<xsl:output method="xml" version="1.0" encoding="UTF-8" indent="yes"/>
<xsl:variable name="break"><br/></xsl:variable>
<xsl:variable name="space"> </xsl:variable>
<xsl:variable name="newline"><xsl:text></xsl:text></xsl:variable>
<xsl:template match="/">
<ns1:Mail xmlns:ns1="http://sap.com/xi/XI/Mail/30">
<Subject>Please Check Attached Direct Debit File</Subject>
<From>S@za</From>
<To>P@za</To>
<Content_Type>text/plain</Content_Type>
<Content>
<xsl:for-each select="MT_SapIsuToABSA_DirectDebitFile/DirectDebitRec/Body">
<xsl:value-of select="Space1"/>
<xsl:value-of select="Cust_AccNo"/>
<xsl:value-of select="Reserve_1"/>
<xsl:value-of select="Cust_Name"/>
<xsl:value-of select="Cust_Name1"/>
<xsl:value-of select="Cust_Bank_AccNo"/>
<xsl:value-of select="Space2"/>
<xsl:value-of select="Cust_Bank_BranchNo"/>
<xsl:value-of select="Reserve_2"/>
<xsl:value-of select="Space3"/>
<xsl:value-of select="Cust_AccNo_1"/>
<xsl:value-of select="Space4"/>
<xsl:value-of select="Reserve_3"/>
<xsl:value-of select="Deduction_Amnt"/>
<xsl:value-of select="Space5"/>
<xsl:value-of select="Reserve_4"/>
<xsl:value-of select="Space6"/>
<xsl:value-of select="Action_Date"/>
<xsl:value-of select="Space7"/>
<xsl:value-of select="Reserve_5"/>
<xsl:text>*#xA;</xsl:text>
note: in real coding replace * with &
</xsl:for-each>
</Content>
</ns1:Mail>
</xsl:template>
</xsl:stylesheet>
Kind regards,
Praveen

Hi,
I think <xsl:text>#xa;</xsl:text> should do the trick, but depending on which OS (ux or win), the "new line" chars sequence is different (win would require a CRLF like <xsl:text>#xd;*#xa;</xsl:text>)
Chris
-> &
Edited by: Christophe PFERTZEL on Apr 14, 2010 2:16 PM

How to retain new line characters when using Node.getNodeValue()

Similar Messages

Maybe you are looking for