How to retain prolog in output xml after parse the input xml

Hi,
I am using com.bea.xml.XmlObject.Factory.parse(String) method to parse a xml.
Input XML is having prolog defore the root node.But after parse the xml using the above method, the prolog is not there in the Output XML.
can any one help me to retain the prolog in Output XML as it is in Input XML......
Thanks in advance..
Regards,
Deba

Hi,
The Input XML is like
<?xml version="1.0" encoding="UTF-8"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
     <SOAP-ENV:Body>
     </SOAP-ENV:Body>
</SOAP-ENV:Envelope>
But after parse the Output XML become
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
     <SOAP-ENV:Body>
     </SOAP-ENV:Body>
</SOAP-ENV:Envelope>
But due to project requirement i want to keep the prolog(<?xml version="1.0" encoding="UTF-8"?>) as it is with Output XML after parse the xml.
can i use any XMLOption while calling parse() method...Or any one have any otherway to retain prolog after parse ?
please help me to get it .
Thanks in advance.
Regards,
Deba

Similar Messages

How do I get my calculator back after installing the new software

How do I get my calculator back after installing the new iO7 software?

I'll assume alot here,?but my guess is you installed the new playforsure firmware for the player. If that is the case then you will need the playforsure plug in for the Creative MediaSource Organizer. You can download it on this creative's site under downloads.

XML-32009: (Fatal Error) Failed to parse the input schema.

I am attempting to generate the Java classes for the attached XLM schema (JMdict_e.xsd) using the following command:
oracle.xml.jaxb.orajaxb -schema JMdict_e.xsd -targetPkg generated
which results in the error "XML-32009: (Fatal Error) Failed to parse the input schema."
I created the schema from a DTD file (http://www.csse.monash.edu.au/~jwb/jmdict_dtd_h.html) following the instructions in the example http://download.oracle.com/docs/cd/B28359_01/appdev.111/b28394/adx_j_sproc.htm#CIHICCJB
I am using version xdk_nt_10_1_0_2_0_production.
Can anyone help me with this please? Thanks.
JMdict_e.xsd
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:element name="dial" type="xs:string"/>
<xs:element name="example" type="xs:string"/>
<xs:element name="upd_date" type="xs:string"/>
<xs:element name="ke_pri" type="xs:string"/>
<xs:element name="re_nokanji" type="xs:string"/>
<xs:element name="xref" type="xs:string"/>
<xs:element name="etym" type="xs:string"/>
<xs:element name="re_inf" type="xs:string"/>
<xs:element name="k_ele">
<xs:complexType>
<xs:sequence>
<xs:element ref="keb"/>
<xs:element minOccurs="0" maxOccurs="unbounded" ref="ke_inf"/>
<xs:element minOccurs="0" maxOccurs="unbounded" ref="ke_pri"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="links">
<xs:complexType>
<xs:sequence>
<xs:element ref="link_tag"/>
<xs:element ref="link_desc"/>
<xs:element ref="link_uri"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="lsource">
<xs:complexType>
<xs:simpleContent>
<xs:extension base="xs:string">
<xs:attribute name="lang" fixed="eng"/>
<xs:attribute name="ls_type" use="optional" type="xs:string"/>
<xs:attribute name="ls_wasei" use="optional" type="xs:string"/>
</xs:extension>
</xs:simpleContent>
</xs:complexType>
</xs:element>
<xs:element name="ent_seq" type="xs:string"/>
<xs:element name="info">
<xs:complexType>
<xs:sequence>
<xs:element minOccurs="0" maxOccurs="unbounded" ref="links"/>
<xs:element minOccurs="0" maxOccurs="unbounded" ref="bibl"/>
<xs:element minOccurs="0" maxOccurs="unbounded" ref="etym"/>
<xs:element minOccurs="0" maxOccurs="unbounded" ref="audit"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="s_inf" type="xs:string"/>
<xs:element name="link_uri" type="xs:string"/>
<xs:element name="bib_txt" type="xs:string"/>
<xs:element name="link_tag" type="xs:string"/>
<xs:element name="bibl">
<xs:complexType>
<xs:sequence>
<xs:element minOccurs="0" ref="bib_tag"/>
<xs:element minOccurs="0" ref="bib_txt"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="upd_detl" type="xs:string"/>
<xs:element name="ant" type="xs:string"/>
<xs:element name="ke_inf" type="xs:string"/>
<xs:element name="audit">
<xs:complexType>
<xs:sequence>
<xs:element ref="upd_date"/>
<xs:element ref="upd_detl"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="pos" type="xs:string"/>
<xs:element name="pri" type="xs:string"/>
<xs:element name="r_ele">
<xs:complexType>
<xs:sequence>
<xs:element ref="reb"/>
<xs:element minOccurs="0" ref="re_nokanji"/>
<xs:element minOccurs="0" maxOccurs="unbounded" ref="re_restr"/>
<xs:element minOccurs="0" maxOccurs="unbounded" ref="re_inf"/>
<xs:element minOccurs="0" maxOccurs="unbounded" ref="re_pri"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="bib_tag" type="xs:string"/>
<xs:element name="re_restr" type="xs:string"/>
<xs:element name="stagk" type="xs:string"/>
<xs:element name="sense">
<xs:complexType>
<xs:sequence>
<xs:element minOccurs="0" maxOccurs="unbounded" ref="stagk"/>
<xs:element minOccurs="0" maxOccurs="unbounded" ref="stagr"/>
<xs:element minOccurs="0" maxOccurs="unbounded" ref="pos"/>
<xs:element minOccurs="0" maxOccurs="unbounded" ref="xref"/>
<xs:element minOccurs="0" maxOccurs="unbounded" ref="ant"/>
<xs:element minOccurs="0" maxOccurs="unbounded" ref="field"/>
<xs:element minOccurs="0" maxOccurs="unbounded" ref="misc"/>
<xs:element minOccurs="0" maxOccurs="unbounded" ref="s_inf"/>
<xs:element minOccurs="0" maxOccurs="unbounded" ref="lsource"/>
<xs:element minOccurs="0" maxOccurs="unbounded" ref="dial"/>
<xs:element minOccurs="0" maxOccurs="unbounded" ref="gloss"/>
<xs:element minOccurs="0" maxOccurs="unbounded" ref="example"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="keb" type="xs:string"/>
<xs:element name="field" type="xs:string"/>
<xs:element name="link_desc" type="xs:string"/>
<xs:element name="reb" type="xs:string"/>
<xs:element name="entry">
<xs:complexType>
<xs:sequence>
<xs:element ref="ent_seq"/>
<xs:element minOccurs="0" maxOccurs="unbounded" ref="k_ele"/>
<xs:element maxOccurs="unbounded" ref="r_ele"/>
<xs:element minOccurs="0" ref="info"/>
<xs:element maxOccurs="unbounded" ref="sense"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="stagr" type="xs:string"/>
<xs:element name="re_pri" type="xs:string"/>
<xs:element name="gloss">
<xs:complexType mixed="true">
<xs:choice minOccurs="0" maxOccurs="unbounded">
<xs:element ref="pri"/>
</xs:choice>
<xs:attribute name="lang" fixed="eng"/>
<xs:attribute name="g_gend" use="optional" type="xs:string"/>
</xs:complexType>
</xs:element>
<xs:element name="misc" type="xs:string"/>
<xs:element name="JMdict">
<xs:complexType>
<xs:sequence>
<xs:element minOccurs="0" maxOccurs="unbounded" ref="entry"/>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:schema>

@Bhaskar (and @user11922800): You have to update the db10g/xdk to a version at least of 10.1.0.4. There were major bug fixes including XML-32009 error (bug number 3375952).
http://www.eygle.com/case/bug10104.htm
I've even tried the op's listing with my more to-date xdk without encountering any problem and it is compiled just fine.
ps: I am sure that was the hasty typo in dvohra16 post. The namespace in the op (/2001/) is correct. Encoding is still capable of resulting in some problems (I've had encounted if I recall), but that is not the problem for the issue raised in this thread.

How to call JSP that outputs XML without HTTP request

It should be a simple solution but I can't seem to find a concise recommendation anywhere. We are building a B2B subsytem for our app and we need to send XML to our vendor. I'm evaluating the possibility of using JSPs for that and everything looks good until the time you actually want to invoke it. It's obvious how to code the JSP itself, but I'm looking for an efficient way to call it to generate XML. We do not have an HTTP request or a servlet, the communication is on the EJB level. So I can't get a RequestDispatcher for example, and we don�t have HttpServletRequest/HttpServletResponse either. It is NOT a servlet or JSP calling another JSP, it's a regular Java class or EJB.
Ideally, I would rather bypass the whole HTTP infrastructure and just use JSP as a formatter. So it boils to a question of how to invoke it and how to pass the parameters without HTTP session or request. One of the alternatives we are reviewing is using XSP but we would prefer JSPs if we can figure out how to call it efficiently. HttpUrlConnection is not a good option, we'd like a direct call.
Any suggestions will be greatly appreciated.

Thanks for the response. Let me clarify the requirements for the question. The way we are supposed to send XML to the vendor is via CORBA (don't ask me why:-) where the only parameter essentially is a string containing the XML document. So the quesiton is not how to send it to the vendor, but how to format our JavaBeans into XML.
We can't use JAXB because it doesn't support schema. We tried a few libraries out there but they stumble on our schema and we can't change it because it comes from the vendor. So it sounds like our only choice for today is to generate XML ourselves.
The data is stored in JavaBean packet objects and that's our input. Our output should be a string with XML document conforming to the schema. Posting a request to ourselves will of course work, but that's too much unnecessary overhead. Another option is implementing HttpServletRequest and HttpServletResponse and calling service method directly. Better suggestions?

Urgent-How to retain data in main page after returning from personalize pag

Hi,
i have a query,
Like if I have a region 'CertificationRN' when I run the page a link stating “Personalize Table: (CertificationRN)” appears above the Region
Now when I enter some data in this region, and then click on 'Personalize Table: (CertificationRN)’ link, personalize page appears.
On personalize page when clicked on “Return to Application’ it returns to the previous page, but the data which I had entered in the region is lost.
i.e. I get empty Textboxes as they where just after running the page.
What should I do to retain the data in the region?
Thanks & Regards
Shilpa

Shilpa in that case personlization links should not be shown to business users, using profile option
1)Personalize Self-service Defn (FND_CUSTOM_OA_DEFINTION)
2)FND: Personalization Region Link Enabled
(FND_PERSONALIZATION_REGION_LINK_ENABLED)
, then where does the question comes of them clicking personalize link.
--Mukul

How do you force DAQmx output to 0 at the end of program execution?

I am using a 6713 to generate an arbitrary analog waveform on its output. However, once the labview vi has finished execution, the output voltage from the 6713 does not go back to 0 V. I have tried to force it back to 0 V by appending a 0 V amplitude waveform to the end of the analog waveform to mixed results (if I give it thousands of points, it goes to 0, but if I make it a more reasonable 100 points, it doesn't). How can I force the output back to 0 V. I tried stopping the task, clearing it, and stopping it and then clearing it. None of those worked.
Any help would be greatly appreciated.
Attachments:
6713 Interface.vi ‏144 KB

First, I have to ask, did you write this VI?
It is very hard to follow and has a lot of confusing structures in it. IN the middle area where a lot of the DAQmx functions are, the error wire loops around so much it is hard to tell what is happening in what order. To the lower left, an array is converted to a cluster, the cluster is unbundled, the individual elements are fed to a compound addition to get a single value. Why not just use a sum array function on the original array?
The stop button is fed to the Stop Sign function. This is Abort execution which is the same as hitting the red stop button at the top of the VI. It ends the execution of the VI right then and there and doesn't allow anything else to happen. Read the context help for that function. As someone else has said on the forum, "Using the Abort button is like using a tree to stop your car. It will stop it, but there might be consequences."
How is this VI being run? Is the Run Continuous button being used? My guess is yes because I don't see any While loops and the only thing the stop button does is end the program abruptly.
You will need to rethink your whole architecture. Stuff that needs to happen once should be set up before a while loop that has wires leading to the while loop or uses a flat sequence to make sure that it happens first. This is you program initialization.
Everything that happens repeatedly would be in the while loop. The front panel Stop button is what ends this loop.
Anything that has to happen before the program ends like closing out tasks happens after the while loop (either by wires for dataflow or in 3rd frame of a flat sequence structure. With this, you should be able to reset your tasks so they output a zero voltage from the analog outputs before the tasks are closed and the program ends naturally.
Appending a zero to the end of the waveform won't help because if the waveforms run continuously, it will restart back at the beginning.
I would highly recommend looking at the example VI's for DAQmx functions and taking the tutorials for Labview that are available on the NI website.
Message Edited by Ravens Fan on 02-23-2008 10:45 PM

How do I rescue OS X Lion after reseting the hard drive ?

After reseting the hard drive I need now to replace my old OS X Lion. I don't have a copy in any other physical way but the internet by the App store. How do I manage to get back my old version of the OS in order to put my litlle mac-mini back to work?
Thank you in advance.

Try reinstalling by following these instruction: http://support.apple.com/kb/HT4718?viewlocale=en_US&locale=en_US

HT1766 How can i restore all my data after deleting the apps? can i syncing back from the macbook?

How can i restore back all my data after deleting the apps and re-install back.
After reinstall back stll retrieve all my data.
Can i syncing back the original frm my macbook since last update is Mar

Favor the route via iTunes and local storage on the computer. MUCH faster than any cloudy backup, no matter the speed of your Internet connection. No network beats the speed of a hard drive. Just make sure there's enough room on the computer before you start, must contain all that's on the iGadget.

Output list based on the input at selection screen by checkbox

i have three fields in the selection screen .each one has a checkbox and by default every checkbox is unchecked .based on the user's selection the output list will display the results.if he had selected two fields the list will show him values pertaining to those fields.
plz revert back with the solution.
<b><REMOVED BY MODERATOR></b>
Message was edited by:
Alvaro Tejada Galindo

Check the below program :
REPORT ZSAI1.
parameters: p_check as checkbox default 'X',
p_check1 as checkbox default 'X',
p_check2 as checkbox default 'X'.
start-of-selection.
if p_check = 'X'.
write:/ 'First check box selected'.
endif.
if p_check1 = 'X'.
write:/ 'Second check box selected'.
endif.
if p_check2 = 'X'.
write:/ 'Third check box selected'.
endif.
Thanks
Seshu

After Effects CC: how to retain Camera Raw's settings when opening the project from a different drive

I want to open a project from a drive which is different than the original one, but which has exactly the same folder structure and files as the original drive. When opening the project, all files appear as missing because the drive is different. When I replace these missing files for the ones in the new drive, After Affects relinks all media. However, the camera-raw settings that were embedded in such files are lost: After Effects opens the files as no previous camera-raw correction had been done. Is there a way to avoid this?

What could be in my project that makes it unable to open?

How to retain data in text boxes after submit?

Hi all,
I have the following problem:
I have a dynamic form with a combo box that choosing an option causes textboxes to show up.
The problem is - every time I press the submit button, no matter if the validation succeeded or not, the data in the textboxes and the combo box is being reset.
I tried to save the data in temporary variables in the javascript section, but with no success.
How can I prevent this behaviour?
Thanks

a dynamic form
the validationAre you using a particular framework on top of JSP such as JSF or Struts or so?

How to Run a Custom Transaction in Back Ground after give the Input?

Hi,
I have problem that how to execute a Custom Transaction in Back Ground after end user will save a variant for input. In my Transaction there is no menu to save a Variant & to Execute in Back Ground.
Please suggest me how to do this in my Custom Transaction.

Hi Ramana,
what kind of report you want to execute? the report is Executable Report or Modulepool prog. ??
if it is a executable program so when u execute (F8) from SE38 when u find the selection-screen in the menu bar ->Program ->Execute in Background( F9) option exits there u can schedule your report in Background or else use toce SM36 ( Define Background Job).
Why you want to run it in background with transaction code if you have this options?
Regards,
Sunil kairam.

How do i call servlet from javascript after validation the javascript

Hi ,
Can anyone tell me how to call a servlet after the javascript is being validated. Here is my code to validate javascript i need to call a servlet inorder to save the data into the same form. I tried calling through the action method in the form but its directly taking me to the servlet but not validating the form. Is there any way that i can validate the form first then call the servlet.
Thanks in advance.
<html>
<head>
<title>Online Blog</title>
<script language ="javascript" type ="text/javascript">
function myfunction()
var mesg = "";
var dmesg = "";
var dnumber = 0;
var number = 0
var Blogstr = document.onlineblog.BlogName;
var Fnamestr = document.onlineblog.FirstName;
var Lnamestr = document.onlineblog.LastName;
var Datestr = document.onlineblog.Dateformat;
var Imagestr = document.onlineblog.uploadimage;
var Imageval = Imagestr.value;
var flength = parseInt(Imageval.length) - 3;
var fext = Imageval.substring(flength,flength + 3);
var Dateval = Datestr.value;
var Dformat = /^\d{2}\/\d{2}\/\d{4}/; //checks the date format.
//splits date into mm, dd , yyyy format.
var m = Dateval.split("/")[0];
var d = Dateval.split("/")[1];
var y = Dateval.split("/")[2];
//Get today's date (removes time).
var today = new Date();
var dd = today.getDate();
var mm = today.getMonth()+1;
var yyyy = today.getFullYear();
//checks if month and date are displayed in mm, dd format and if not sets to mm,dd.
if (mm <10)
mm = '0'+mm;
if (dd <10)
dd = '0'+dd;
//checks if name of the blog is empty
if(Blogstr.value == "")
number = number+1;
mesg += "\n" + number + "Name of the blog";
//checks if value of Frist Name is empty;
if(Fnamestr.value == "")
number = number+1;
mesg += "\n" + number + "First Name";
//checks if value of Last Name is empty;
if(Lnamestr.value == "")
number = number+1;
mesg += "\n" + number + "Last Name";
//checks if value of date is empty;
if(Datestr.value == "")
number = number+1;
mesg += "\n" + number + "Date of mm/dd/yyyy format";
//checks if value of image field is empty;
if(Imagestr.value == "")
number = number+1;
mesg += "\n" + number + "select an image";
//displays all the error messages.
if (number > 0)
alert ("Please enter the following" + mesg);
return false;
//checks if entered date format is mm/dd/yyyy
if(!Dformat.test(Dateval))
dnumber = dnumber +1;
dmesg += "\n" + dnumber + "please enter a valid date(mm/dd/yyyy)";
//checks if date is greater than 12 and is 2 digits.
if ((m>12 && m<100) || (m> = 100 && m<1000) || (m==0))
dnumber = dnumber+1;
dmesg += "\n" + dnumber + "Enter valid month(mm)";
//checks if month has 31 or 30 days and is in dd format.
if (((d>30) && (d<100) && (m == 04 || m == 06 || m == 9 || m == 11)) || ((m == 01 || m == 03 || m == 05 || m == 07 || m == 08 || m == 10 || m==12) && (d >31) && (d<100)) || d == 0)
dnumber = dnumber+1;
dmesg += "\n" + dnumber + "Enter valid date(dd)";
//checks if month has 28 or 29 days and wheather is a leap year or not.
if((m == 02 && d>29 && y%4 == 0) || (m == 02 && d>28 && y%4 != 0))
dnumber = dnumber+1;
dmesg += "\n" + dnumber + "Enter valid date(dd)";
//checks if entered date is prior to the current date.
if((m == mm && d == dd && y == yyyy) || (y > yyyy)|| (d>=dd && m>=mm && m<=12 && y==yyyy) || (d<=dd && m>mm && y == yyyy && m<=12))
dnumber = dnumber + 1;
dmesg += "\n" + dnumber + "Please enter a date prior to the current date";
if (y == 0 || y < 1000 || y>9999) //checks if year is zero and is a 4 digit number.
dnumber = dnumber + 1;
dmesg += "\n" + dnumber + "Enter a valid year(yyyy)";
//checks if image format is jpg or gif.
if(fext != "jpg" && fext != "gif")
dnumber = dnumber + 1
dmesg += "\n" + dnumber + "You can only upload gif or jpg images.";
if(dnumber>0)
alert("please check the followin error messages"+dmesg);
return false;
</script>
<style type="text/css">
.style1 {color: #FF0000}
body {
     background-color: #FFCCFF;
h2 {
     color: #CC3399;
h1 {
     color: cc3399;
.style2 {
     font-family: Arial, Helvetica, sans-serif;
     font-weight: bold;
.style5 {color: #000000; font-family: "Times New Roman", Times, serif;}
</style>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1"><body>
<h1 align="center">Webloggers space</h1>
<p align="center">Home
<p>
<h4> Please enter the following details to register.</h4>
<p> <b>Note:</b> All fields marked with <span class="style1">*</span>(astrick)
are compulsory.</p>
<form action="servlet/BlogServlet" name="onlineblog" onsubmit = "return myfunction()" method="post">
<table width="60%" border="0" cellspacing="5" cellpadding="2">
<tr>
<td><span class="style1">*</span>Name of the Blog</td>
<td><input type="text" name="BlogName"/></td>
</tr>
<tr>
<td><span class="style1">*</span>First Name</td>
<td><input type="text" name="FirstName"/></td>
</tr>
<tr>
<td><span class="style1">*</span>Last Name</td>
<td><input type="text" name="LastName"/></td>
</tr>
<tr>
<td><span class="style1">*</span>Date(mm/dd/yyyy)</td>
<td><input type="text" name="Dateformat"/></td>
</tr>
<tr>
<td>Category</td>
<td><select name="catagory" size="1">
<option></option>
<option>Business</option>
<option>Education</option>
<option>Entertainment</option>
<option>Food</option>
<option>Hobbies</option>
<option>Personal</option>
<option>Politics</option>
<option>Sports</option>
</select></td>
</tr>
<tr>
<td>Enter your text here:</td>
<td><textarea name="textarea" cols="45" rows="5"></textarea></td>
</tr>
<tr>
<td><span class="style1">*</span>Upload Image <span class="style5">(.jpg
          or .gif)</span></td>
<td><input type="file" name="uploadimage" /></td>
</tr>
<tr>
<td></td>
<td><input type="submit" value="save">
<input type="reset" name="reset" value="Reset" /></td>
</tr>
</table>
</form>
</body>
</html>

Your javascript code contains a syntax error. That's why the function isn't being called. Take a look at this line in your code.
if ((m>12 && m<100) || (m> = 100 && m<1000) || (m==0))Notice the space between > and =. Remove that space.
m >= 100

How to get back all lost photos after updating the iOS8?

When I updated my IOS8 I thought I lost my photos, so I have restored my iPhone but after restoring I have discovered that I lost all my photos, please advise how can get/ retrieve all the lost photos specially since I didn't do backup?

If you backed up to iCloud, you might be able to choose from more than one backup. Each backup made in iTunes on your computer usually replaces the older one, except if you use a backup to restore from. Go to iTunes/Edit/Preferences/Devices and check if there are more backups listed, which you can then use to restore.
Check these articles about backups:
Create and delete iPhone, iPad, and iPod touch backups in iTunes
Back up and restore your iOS device with iCloud or iTunes
Choosing an iOS backup method (Should I use iTunes or iCloud to back up my iOS device?)

How can i refresh view on query after changing the query?

Hi,
i built few view's on 1 query in BI7. after i made a change in the query i haven't seen it in the view, why?
it's not refreshing automaticly from the query? and if it's not, how can i refresh the view?
thanks
Meirav
Edited by: Meirava on Apr 2, 2009 11:43 AM

Hi,
You need to refresh that view and once again save the view with changed settings. Then it will brings according to the query changes.Once check the variables also.
Regards
Pcrao.

How to retain prolog in output xml after parse the input xml

Similar Messages

Maybe you are looking for