How to retain the master slide background at the end of the quiz reporting page of a project

I have noticed that the content of the master slide is not retained till the end in the quiz results page of the project. What should I do to retain the contents till the end of the project?

Hi,
Thanks for your time. I have checked the transitions. i didnt give any transition to the slides in the project and i also check the preferences too, i had disable the options that is to fade in and fade out. My problem is "I have 12 slides in this with an intro slide and 10 question slides and then the quiz results page. In that result page, it is showing the result at the end of the result slide the pause button in the skin turned to play button. While clicking that play button it shows only the results, review quiz button and retake quiz button only. It doesn't display the images, widgets, text and some other options which is used in master slide or in the slide itself " Why those things have disappeared? Can you guide me how to overcome this issue.
The solution for the playbar is quiet good. One more doubt in that, The play bar should be displayed in that page but it should be disabled, Is there any solution for this? If yes, kindly share with me

Similar Messages

  • TOC tab pushing down master slide background

    Why is this happening? It only occurs on three new slides and it pushes down the master slide (background only, not content)

    I am using Captivate 7. Here are two screen shots; one that is displayed correctly and one that pushes the master slide down, but leaves the content in place.

  • Adjusting Image Used for Master Slide Background

    I'd like to use a jpeg of mine as the master slide background in a Keynote doc. But I'd like to be able to adjust that image (e.g., making it brighter or less opaque) so that text is clearly visible on it. I know that in the Inspector there are ample ways to adjust the qualities of an image inserted into a slide, but I have not found any way to do with images that are slide backgrounds (or the slide master).
    Does anyone know a way? Thanks.

    I'd like to use a jpeg of mine as the master slide background in a Keynote doc. But I'd like to be able to adjust that image (e.g., making it brighter or less opaque) so that text is clearly visible on it. I know that in the Inspector there are ample ways to adjust the qualities of an image inserted into a slide, but I have not found any way to do with images that are slide backgrounds (or the slide master).
    Does anyone know a way? Thanks.

  • Master slide background color

    When I select the master slide on the far left (the slightly bigger one), and I deselect "project background" and change the "stage:" to a different color, nothing happens.  I am trying to use the solid color (paint can) and I put in my choice of Hex color (005983).  When I try the same thing on the individual master slides to the right, I also get nothing.  I even changed the Edit>Preferences>Defaults>Background color to the same color.  And I get nothing.
    I can (and have) put other things (logo, color bar) on the Master slide, and it propigates to the right on the other slides.  What am I missing? 

    There are objects on the main master slide, they are not merged into the background. Yes, you can set the stage color for a normal slide as well:
    What do you really want to achieve with selecting a blue color for the main master slide? It will not show up because you have objects on that slide that cover the stage color.
    I know, documentation is not very helpful. I have been writing a lot about Captivate to provide some clues, but not about master slides. It is a lot of work to write out documentation and I'm offering everything for free. Same with answers here, where Rod and Rick are also spending many hours trying to provide answers.
    Depending on the theme you started with, there can be a project background. You used the white theme. That background will always show up on the main master slide, even when you uncheck Project background. If you want not to see that Project background on a normal slide, but a full blue color, you have to unselect Use Master Slide Background, then unselect Project Background (is dimmed as long as you use Master Slide Background) and then you can use a stage color. Those settings I show in the screenshot.

  • How to modify a Master Slide on a single page.

    I am wondering how to modify the master slide on a particular slide.
    Like in InDesign when you hold shift + ctrl you can select items from the master page and modify them on that particular page only, without making the changes to every page where that Maser page is applied.
    Trying to figure out how to accomplish this simple task in Captivate 5. (Windows 7)

    As far as I know that option is not avaiable.
    You could duplicate your master slide, make the changes to it, then assign that new master to the individual slide.
    This works if there's only one, but if you had many variations of master slides it would get unwieldy after a while and defeat the purpose of using master slides, IMO.

  • Am I able to name an object on the master slide?

    I would like to name, for example, the "Back" button so that I can hide it on the first page. The same would go for the "Next" button. These are my own buttons. I could also hide the "Pause" button and show the "Play" button, etc.
    I just cannot find where I could name these.
    Thanks

    Objects on the master slide cannot be named and you cannot give them a duration. That means that you cannot control them by (advanced) actions neither.
    I explained some ideas in: http://blog.lilybiri.com/why-i-like-shape-buttons-captivate-6
    Lilybiri

  • How do I gang automation? ie. I need to reduce the volume on the master fader, so I need to reduce the volume of all my faders ( ideally simultaneously.)

    How do I gang automation? ie. I need to reduce the volume on the master fader, so I need to reduce the volume on all my faders (ideally simultaneously.)

    Open the Mixer, select all the faders at once and lower 1 of them. the others will follow proportionally.
    Or you can just put a gain plugin in the master output and lowerr the gain coming to the masterfader.

  • Why are animations disappearing when I change the time of the master slide?

    I apologize if this is a stupid question, but I have Adobe Captivate 6, have had Captivate since it was Macromedia Captivate, and I am just stuck.  I imported a .pptx file that a colleague created, and on several pages she has animations.  I went through the .pptx and it looks and works fine. 
    When I import it into Captivate, the animations work fine, but I'm not able to advance each slide until a couple of seconds after it appears.  That won't fly with some of the people at my organization who prefer the clickclickclickclick method of reviewing something.  When I change the timing of the slide or the clickbox or the master slide, the animations sort of get skipped over.
    Can someone please help me?

    Sure, here you go.

  • The reference to entity "M" must end with the ';' delimiter issue

    Hello,
    My interface scenario is third party system sending file to PI; Then PI is generating IDOC and sending it to ECC system.
    Now issue is we are getting below error message,
    “The reference to entity "M" must end with the ';' delimiter”.
    What do I have to do to fix this error? I'm not sure what the problem about the delimiter is?
    I am giving example here,
    Input payload like:
    <NAME>H&M</NAME>
    <NAME_2>H&M</NAME_2>
    <NAME_3></NAME_3>
    <POSTL_CODE>00002</POSTL_CODE>
    <CITY>HELSINKI</CITY>
    If I removed ‘&’ from  <Name> segment value then IDOC is generated correctly.
    But Name is coming to PI like that only.
    Please help me.

    Hello Rohan
    It might be that PI thinks &M is part of an XML escape code in line
    <NAME>H&M</NAME>
    it should be <NAME>H&amp;M</NAME>
    Kind regards
    Steve

  • How do I add a hover state to a smart shape button on the master slide? CP7

    I want to use a button with a hover state on my master slide in CP7. I created a smart shape and checked the box 'use as button.' I then created 3 image files with the "x_up, x_down, x_over' extensions. When I select my smart shape and choose a custom pattern from the fill menu and select my 'x_up' image file, the smart shape does not recognize the hover state. Is there another way to achieve this?
    Thanks!

    Thanks I think I get it now after reading your post. Shape buttons can only shrink when they are pressed and nothing else. I was thinking a work round for me would be to use a regular button with the up, over, down state, put this regular button on the first slide and set the timing for 'display for rest of project.' However I don't see this option in the timing panel:
    Is this option somewhere else?
    Thx!

  • How to find out number of background work processe available in the system?

    Hi All,
    I have a FM that triggers a background job using JOB_OPEN, ABAP_SUBMIT and JOB_CLOSE. But the problem is if there are no background work processes available at that moment, it does not return error. Not sure whether the job is even scheduled!
    Is there a way to find out if there are any background work processes available in the system? I know a FM SPBT_INITIALIZE which gives info about dialog work processes. Is there any other FM similar to this which gives info about background wp??
    Regards,
    Shailesh

    your Job will remain in a queue by message handler. once workprocess is free, your job gets scheduled
    by the way, you can use the functionality used in FM TH_DISPLAY_WORKPROCESS_LIST to read the workprocesses
    the command which gets you the workprocess is:
    CALL 'ThWpInfo' ID 'OPCODE' FIELD OPCODE_WP_LIST
                      ID 'TAB' FIELD LIST_STATE_WPLST-TABL
                      ID 'CPU' FIELD LIST_STATE_WPLST-CPU.
    check how its written in include LSDEBF01, form SET_LIST_WPLST
    Edited by: Soumyaprakash Mishra on Dec 12, 2011 12:17 PM

  • How do I extract a theme background and set it as the desktop background?

    Hi
    I want to have the industrial theme background as the desktop background.
    I have tried unpacking the keynote application but end up with Industrial_1920x1080.kth
    How do I convert a kth file into a recognisable graphics file?
    Thanks
    AJ

    If you mean that you want to use the Moroccan background in Pages, yes the same principle applies. the Keynote "package" is simply the Keynote application -- Control-Click on the Keynote icon in the Finder, then choose "Show Package Contents" from the pop-up menu. In the new Finder window that appears, follow the directions as outlined above. Be careful not to move or delete any files in the package.

  • How can I insert an additional page without screwing up the master layouts? I have a document with multiple sized pages and the same master applied to each page.

    My document is currently 10 pages. There are 5 different sizes of the pages. They all have the same master page applied to them. When I go to insert a new page and/or duplicate a page...it screws up where the master layout goes. Surely there is simple way to do this??
    For example:
    These pages are all inserts for a sales folder.
    Pages 7 and 8 are sized at 8.5" w X 10.25" h. Pages 9 and 10 are sized at 8.5" w X 11" h.
    I need to duplicate page 8 and have it go between 8 and 9 and it needs to be sized like pages 7 and 8 (or 8.5" w X 10.25" h)
    When I go to to do this, it screws up the master page layout for the remaining pages of the document.
    I have tried several ways to do this. Can anyone help??
    Thanks!

    Try to define 5 different master pages.

  • My sound buttons keep stopping working and when I click onto a video it doesn't even have the little slider that you use to turn the volume up. What is wrong with my phone?

    My sound buttons on my iPhone 4S keep stopping working, even wen I use the switch to turn my phone on loud it comes up and as soon as I hit a volume button it disappears! Also when I am on a video on Facebook etc the volume slider isn't there?

    You need to re install OSX. If you have the dmg file downloaded via torrentz this is how you can create a bootable external HD or Flash drive (8 GB+)
    https://discussions.apple.com/message/23957654#23957654
    Peace
    Harry

  • Can the Master Password Ever Be Figured Out by the Tech Guys at my Job?

    At my job, all the computers are networked into a server. Can the tech guys figure out my Master Password? In other words, how safe are my passwords on Firefox? I'm concerned that the tech department will be able to determine my Master Password and therefore have access to all my passwords.

    Read [http://kb.mozillazine.org/Master_password http://kb.mozillazine.org/Master_password] Passwords are encrypted with 3DES-CBC with a key derived from the master key (yours or the default one hardcoded in Firefox if you didn't define a master password) then encoded in base64 and stored in signons.sqlite database. If a user tries to remove the master password, all the password list is deleted.

Maybe you are looking for