How to rewrite the query
hi ,
Actual i write the query like this , and run this query in sql developer ,
it will take more than 15 mins
alloc_details table -- 2 lac records
doc_details -- 2 lac records
query :
SELECT
a.activity
, sum( a.lamt ) lamt
, sum( a.lamt ) camt
FROM
alloc_detail a
WHERE
a.alc_code <>'JOB'
And a.alc_value is not null
And EXISTS ( SELECT
distinct b.doc_no
FROM
doc_detail b
WHERE
a.org=b.org
And a.doc_no=b.doc_no
And a.doc_type=b.doc_type
And ( b.dr_act_code='11111' OR b.cr_act_code='111111')
And ( ( trunc( b.doc_date ) >='01-jan-08' ) )
And ( ( trunc( b.doc_date ) <= '31-jan-08' ) )
GROUP BY
a.alc_value
Anyother way to rewrite the query .
Is this query working? a.activity seems to be a "not a group by expression"
select a.activity,sum(a.lamt) lamt,sum(a.lamt) camt /* 2 times same sum - a typo ? */
from alloc_detail a
where a.alc_code != 'JOB' /* not equal presumed */
and a.alc_value is not null
and exists(select distinct b.doc_no
from doc_detail b
where a.org = b.org
and a.doc_no = b.doc_no
and a.doc_type = b.doc_type
and (b.dr_act_code = '11111' or b.cr_act_code = '111111')
and trunc(b.doc_date) >= '01-jan-08'
and trunc(b.doc_date) <= '31-jan-08'
group by a.alc_valuehow about applying predicates first
select a.alc_value,sum(a.lamt) lamt,sum(a.camt) camt
from (select alc_value,lamt,camt,org,doc_no,doc_type
from alloc_detail
where alc_code != 'JOB'
and alc_value is not null
) a,
(select distinct org,doc_no,doc_type
from doc_detail
where doc_date >= to_date('01-jan-08','dd-mon-rr')
and doc_date <= to_date('31-jan-08','dd-mon-rr') + 1 - 1/24/60/60
and (dr_act_code = '11111' or cr_act_code = '111111')
) b
where a.org = b.org
and a.doc_no = b.doc_no
and a.doc_type = b.doc_type
group by a.alc_valueRegards
Etbin
Similar Messages
-
How can rewrite the Query using Analytical functions ?
Hi,
I have the SQL script as shown below ,
SELECT cd.cardid, cd.cardno,TT.TRANSACTIONTYPECODE,TT.TRANSACTIONTYPEDESC DESCRIPTION,
SUM (NVL (CASE tt.transactiontypecode
WHEN 'LOAD_ACH'
THEN th.transactionamount
END, 0)
) AS load_ach,
SUM
(NVL (CASE tt.transactiontypecode
WHEN 'FUND_TRANSFER_RECEIVED'
THEN th.transactionamount
END,
0
) AS Transfersin,
( SUM (NVL (CASE tt.transactiontypecode
WHEN 'FTRNS'
THEN th.transactionamount
END,
0
) +
SUM (NVL (CASE tt.transactiontypecode
WHEN 'SEND_MONEY'
THEN th.transactionamount
END, 0)
)) AS Transferout,
SUM (NVL (CASE tt.transactiontypecode
WHEN 'WITHDRAWAL_ACH'
THEN th.transactionamount
END, 0)
) AS withdrawal_ach,
SUM (NVL (CASE tt.transactiontypecode
WHEN 'WITHDRAWAL_CHECK'
THEN th.transactionamount
END, 0)
) AS withdrawal_check,
( SUM (NVL (CASE tt.transactiontypecode
WHEN 'WITHDRAWAL_CHECK_FEE'
THEN th.transactionamount
END,
0
) +
SUM (NVL (CASE tt.transactiontypecode
WHEN 'REJECTED_ACH_LOAD_FEE'
THEN th.transactionamount
END,
0
) +
SUM (NVL (CASE tt.transactiontypecode
WHEN 'WITHDRAWAL_ACH_REV'
THEN th.transactionamount
END,
0
) +
SUM (NVL (CASE tt.transactiontypecode
WHEN 'WITHDRAWAL_CHECK_REV'
THEN th.transactionamount
END,
0
) +
SUM
(NVL (CASE tt.transactiontypecode
WHEN 'WITHDRAWAL_CHECK_FEE_REV'
THEN th.transactionamount
END,
0
) +
SUM
(NVL (CASE tt.transactiontypecode
WHEN 'REJECTED_ACH_LOAD_FEE_REV'
THEN th.transactionamount
END,
0
) +
SUM (NVL (CASE tt.transactiontypecode
WHEN 'OVERDRAFT_FEE_REV'
THEN th.transactionamount
END, 0)
) +
SUM (NVL (CASE tt.transactiontypecode
WHEN 'STOP_CHECK_FEE_REV'
THEN th.transactionamount
END,
0
) +
SUM (NVL (CASE tt.transactiontypecode
WHEN 'LOAD_ACH_REV'
THEN th.transactionamount
END, 0)
) +
SUM (NVL (CASE tt.transactiontypecode
WHEN 'OVERDRAFT_FEE'
THEN th.transactionamount
END, 0)
) +
SUM (NVL (CASE tt.transactiontypecode
WHEN 'STOP_CHECK_FEE'
THEN th.transactionamount
END, 0)
)) AS Fee,
th.transactiondatetime
FROM carddetail cd,
transactionhistory th,
transactiontype tt,
(SELECT rmx_a.cardid, rmx_a.endingbalance prev_balance, rmx_a.NUMBEROFDAYS
FROM rmxactbalreport rmx_a,
(SELECT cardid, MAX (reportdate) reportdate
FROM rmxactbalreport
GROUP BY cardid) rmx_b
WHERE rmx_a.cardid = rmx_b.cardid AND rmx_a.reportdate = rmx_b.reportdate) a
WHERE th.transactiontypeid = tt.transactiontypeid
AND cd.cardid = th.cardid
AND cd.cardtype = 'P'
AND cd.cardid = a.cardid (+)
AND CD.CARDNO = '7116734387812758335'
--AND TT.TRANSACTIONTYPECODE = 'FUND_TRANSFER_RECEIVED'
GROUP BY cd.cardid, cd.cardno, numberofdays,th.transactiondatetime,tt.transactiontypecode,TT.TRANSACTIONTYPEDESC
Ouput of the above query is :
CARDID CARDNO TRANSACTIONTYPECODE DESCRIPTION LOAD_ACH TRANSFERSIN TRANSFEROUT WITHDRAWAL_ACH WITHDRAWAL_CHECK FEE TRANSACTIONDATETIME
6005 7116734387812758335 FUND_TRANSFER_RECEIVED Fund Transfer Received 0 3.75 0 0 0 0 21/09/2007 11:15:38 AM
6005 7116734387812758335 FUND_TRANSFER_RECEIVED Fund Transfer Received 0 272 0 0 0 0 05/10/2007 9:12:37 AM
6005 7116734387812758335 WITHDRAWAL_ACH Withdraw Funds via ACH 0 0 0 300 0 0 24/10/2007 3:43:54 PM
6005 7116734387812758335 SEND_MONEY Fund Transfer Sent 0 0 1 0 0 0 19/09/2007 1:17:48 PM
6005 7116734387812758335 FUND_TRANSFER_RECEIVED Fund Transfer Received 0 1 0 0 0 0 18/09/2007 7:25:23 PM
6005 7116734387812758335 LOAD_ACH Prepaid Deposit via ACH 300 0 0 0 0 0 02/10/2007 3:00:00 AM
I want the output like for Load_ACH there should be one record etc.,
Can any one help me , how can i rewrite the above query using analytical functions .,
SekharNot sure of your requirements but this mayhelp reduce your code;
<untested>
SUM (
CASE
WHEN tt.transactiontypecode IN
('WITHDRAWAL_CHECK_FEE', 'REJECTED_ACH_LOAD_FEE', 'WITHDRAWAL_ACH_REV', 'WITHDRAWAL_CHECK_REV',
'WITHDRAWAL_CHECK_FEE_REV', 'REJECTED_ACH_LOAD_FEE_REV', 'OVERDRAFT_FEE_REV','STOP_CHECK_FEE_REV',
'LOAD_ACH_REV', 'OVERDRAFT_FEE', 'STOP_CHECK_FEE')
THEN th.transactionamount
ELSE 0) feeAlso, you might want to edit your post and use [pre] and [/pre] tags around your code for formatting. -
How to get the query values from the url in a servlet and pass them to jsp
ok..this is the situation...
all applications are routed through a login page...
so if we have a url like www.abc.com/appA/login?param1=A¶m2=B , the query string must be passed onto a servlet(which is invoked before the login page is displayed)..the servlet must process the query string and then should pass all those values(as hidden values) to the login jsp..then user enters username and pswd, then there should be another servlet which takes all the hidden values of jsp and also username and pswd, authenticates the user and sends the control back to that particular application along with the hidden values...
so i need help on how to parse the query string from the original url in the servlet, pass it out to jsp, and then pass it back to the servlet and back to the original application...damnn...any help would be greatly appreciated...thanksok..this is the situation...Sounds like you have a bad design on your hands.
You're going to send passwords in a GET request as clear text? Nice security there.
Why not start with basic security and work your way up?
% -
How to improve the query performance in to report level and designer level
How to improve the query performance in to report level and designer level......?
Plz let me know the detail view......first its all based on the design of the database, universe and the report.
at the universe Level, you have to check your Contexts very well to get the optimal performance of the universe and also your joins, keep your joins with key fields, will give you the best performance.
at the report level, try to make the reports dynamic as much as you can, (Parameters) and so on.
and when you create a paremeter try to get it match with the key fields in the database.
good luck
Amr -
How to improve the query performance or tune query from Explain Plan
Hi
The following is my explain plan for sql query. (The plan is generated by Toad v9.7). How to fix the query?
SELECT STATEMENT ALL_ROWSCost: 4,160 Bytes: 25,296 Cardinality: 204
8 NESTED LOOPS Cost: 3 Bytes: 54 Cardinality: 1
5 NESTED LOOPS Cost: 2 Bytes: 23 Cardinality: 1
2 TABLE ACCESS BY INDEX ROWID TABLE AR.RA_CUSTOMER_TRX_ALL Cost: 1 Bytes: 13 Cardinality: 1
1 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.RA_CUSTOMER_TRX_U1 Cost: 1 Cardinality: 1
4 TABLE ACCESS BY INDEX ROWID TABLE AR.HZ_CUST_ACCOUNTS Cost: 1 Bytes: 10 Cardinality: 1
3 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.HZ_CUST_ACCOUNTS_U1 Cost: 1 Cardinality: 1
7 TABLE ACCESS BY INDEX ROWID TABLE AR.HZ_PARTIES Cost: 1 Bytes: 31 Cardinality: 1
6 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.HZ_PARTIES_U1 Cost: 1 Cardinality: 1
10 TABLE ACCESS BY INDEX ROWID TABLE AR.RA_CUSTOMER_TRX_ALL Cost: 1 Bytes: 12 Cardinality: 1
9 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.RA_CUSTOMER_TRX_U1 Cost: 1 Cardinality: 1
15 NESTED LOOPS Cost: 2 Bytes: 29 Cardinality: 1
12 TABLE ACCESS BY INDEX ROWID TABLE AR.RA_CUSTOMER_TRX_ALL Cost: 1 Bytes: 12 Cardinality: 1
11 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.RA_CUSTOMER_TRX_U1 Cost: 1 Cardinality: 1
14 TABLE ACCESS BY INDEX ROWID TABLE ONT.OE_ORDER_HEADERS_ALL Cost: 1 Bytes: 17 Cardinality: 1
13 INDEX RANGE SCAN INDEX (UNIQUE) ONT.OE_ORDER_HEADERS_U2 Cost: 1 Cardinality: 1
21 FILTER
16 TABLE ACCESS FULL TABLE ONT.OE_TRANSACTION_TYPES_TL Cost: 2 Bytes: 1,127 Cardinality: 49
20 NESTED LOOPS Cost: 2 Bytes: 21 Cardinality: 1
18 TABLE ACCESS BY INDEX ROWID TABLE AR.RA_CUSTOMER_TRX_ALL Cost: 1 Bytes: 12 Cardinality: 1
17 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.RA_CUSTOMER_TRX_U1 Cost: 1 Cardinality: 1
19 INDEX RANGE SCAN INDEX (UNIQUE) ONT.OE_ORDER_HEADERS_U2 Cost: 1 Bytes: 9 Cardinality: 1
23 TABLE ACCESS BY INDEX ROWID TABLE AR.RA_CUSTOMER_TRX_ALL Cost: 1 Bytes: 12 Cardinality: 1
22 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.RA_CUSTOMER_TRX_U1 Cost: 1 Cardinality: 1
45 NESTED LOOPS Cost: 4,160 Bytes: 25,296 Cardinality: 204
42 NESTED LOOPS Cost: 4,150 Bytes: 23,052 Cardinality: 204
38 NESTED LOOPS Cost: 4,140 Bytes: 19,992 Cardinality: 204
34 NESTED LOOPS Cost: 4,094 Bytes: 75,850 Cardinality: 925
30 NESTED LOOPS Cost: 3,909 Bytes: 210,843 Cardinality: 3,699
26 PARTITION LIST ALL Cost: 2,436 Bytes: 338,491 Cardinality: 14,717 Partition #: 29 Partitions accessed #1 - #18
25 TABLE ACCESS BY LOCAL INDEX ROWID TABLE XLA.XLA_AE_HEADERS Cost: 2,436 Bytes: 338,491 Cardinality: 14,717 Partition #: 29 Partitions accessed #1 - #18
24 INDEX SKIP SCAN INDEX XLA.XLA_AE_HEADERS_N1 Cost: 264 Cardinality: 1,398,115 Partition #: 29 Partitions accessed #1 - #18
29 PARTITION LIST ITERATOR Cost: 1 Bytes: 34 Cardinality: 1 Partition #: 32
28 TABLE ACCESS BY LOCAL INDEX ROWID TABLE XLA.XLA_AE_LINES Cost: 1 Bytes: 34 Cardinality: 1 Partition #: 32
27 INDEX RANGE SCAN INDEX (UNIQUE) XLA.XLA_AE_LINES_U1 Cost: 1 Cardinality: 1 Partition #: 32
33 PARTITION LIST ITERATOR Cost: 1 Bytes: 25 Cardinality: 1 Partition #: 35
32 TABLE ACCESS BY LOCAL INDEX ROWID TABLE XLA.XLA_DISTRIBUTION_LINKS Cost: 1 Bytes: 25 Cardinality: 1 Partition #: 35
31 INDEX RANGE SCAN INDEX XLA.XLA_DISTRIBUTION_LINKS_N3 Cost: 1 Cardinality: 1 Partition #: 35
37 PARTITION LIST SINGLE Cost: 1 Bytes: 16 Cardinality: 1 Partition #: 38
36 TABLE ACCESS BY LOCAL INDEX ROWID TABLE XLA.XLA_EVENTS Cost: 1 Bytes: 16 Cardinality: 1 Partition #: 39 Partitions accessed #2
35 INDEX UNIQUE SCAN INDEX (UNIQUE) XLA.XLA_EVENTS_U1 Cost: 1 Cardinality: 1 Partition #: 40 Partitions accessed #2
41 PARTITION LIST SINGLE Cost: 1 Bytes: 15 Cardinality: 1 Partition #: 41
40 TABLE ACCESS BY LOCAL INDEX ROWID TABLE XLA.XLA_TRANSACTION_ENTITIES Cost: 1 Bytes: 15 Cardinality: 1 Partition #: 42 Partitions accessed #2
39 INDEX UNIQUE SCAN INDEX (UNIQUE) XLA.XLA_TRANSACTION_ENTITIES_U1 Cost: 1 Cardinality: 1 Partition #: 43 Partitions accessed #2
44 TABLE ACCESS BY INDEX ROWID TABLE GL.GL_CODE_COMBINATIONS Cost: 1 Bytes: 11 Cardinality: 1
43 INDEX UNIQUE SCAN INDEX (UNIQUE) GL.GL_CODE_COMBINATIONS_U1 Cost: 1 Cardinality: 1damorgan wrote:
Tuning is NOT about reducing the cost of i/o.
i/o is only one of many contributors to cost and only one of many contributors to waits.
Any time you would like to explore this further run this code:
SELECT 1 FROM dual
WHERE regexp_like(' ','^*[ ]*a');but not on a production box because you are going to experience an extreme tuning event with zero i/o.
And when I say "extreme" I mean "EXTREME!"
You've been warned.I think you just need a faster server.
SQL> set autotrace traceonly statistics
SQL> set timing on
SQL> select 1 from dual
2 where
3 regexp_like (' ','^*[ ]*a');
no rows selected
Elapsed: 00:00:00.00
Statistics
1 recursive calls
0 db block gets
0 consistent gets
0 physical reads
0 redo size
243 bytes sent via SQL*Net to client
349 bytes received via SQL*Net from client
1 SQL*Net roundtrips to/from client
0 sorts (memory)
0 sorts (disk)
0 rows processedRepeated from an Oracle 10.2.0.x instance:
SQL> SELECT DISTINCT SID FROM V$MYSTAT;
SID
310
SQL> ALTER SESSION SET EVENTS '10053 TRACE NAME CONTEXT FOREVER, LEVEL 1';
Session altered.
SQL> select 1 from dual
2 where
3 regexp_like (' ','^*[ ]*a');The session is hung. Wait a little while and connect to the database using a different session:
COLUMN STAT_NAME FORMAT A35 TRU
SET PAGESIZE 200
SELECT
STAT_NAME,
VALUE
FROM
V$SESS_TIME_MODEL
WHERE
SID=310;
STAT_NAME VALUE
DB time 9247
DB CPU 9247
background elapsed time 0
background cpu time 0
sequence load elapsed time 0
parse time elapsed 6374
hard parse elapsed time 5997
sql execute elapsed time 2939
connection management call elapsed 1660
failed parse elapsed time 0
failed parse (out of shared memory) 0
hard parse (sharing criteria) elaps 0
hard parse (bind mismatch) elapsed 0
PL/SQL execution elapsed time 95
inbound PL/SQL rpc elapsed time 0
PL/SQL compilation elapsed time 0
Java execution elapsed time 0
repeated bind elapsed time 48
RMAN cpu time (backup/restore) 0Seems to be using a bit of time for the hard parse (hard parse elapsed time). Wait a little while, then re-execute the query:
STAT_NAME VALUE
DB time 9247
DB CPU 9247
background elapsed time 0
background cpu time 0
sequence load elapsed time 0
parse time elapsed 6374
hard parse elapsed time 5997
sql execute elapsed time 2939
connection management call elapsed 1660
failed parse elapsed time 0
failed parse (out of shared memory) 0
hard parse (sharing criteria) elaps 0
hard parse (bind mismatch) elapsed 0
PL/SQL execution elapsed time 95
inbound PL/SQL rpc elapsed time 0
PL/SQL compilation elapsed time 0
Java execution elapsed time 0
repeated bind elapsed time 48
RMAN cpu time (backup/restore) 0The session is not reporting additional CPU usage or parse time.
Let's check one of the session's statistics:
SELECT
SS.VALUE
FROM
V$SESSTAT SS,
V$STATNAME SN
WHERE
SN.NAME='consistent gets'
AND SN.STATISTIC#=SS.STATISTIC#
AND SS.SID=310;
VALUE
163Not many consistent gets after 20+ minutes.
Let's take a look at the plan:
SQL> SELECT SQL_ID,CHILD_NUMBER FROM V$SQL WHERE SQL_TEXT LIKE 'select 1 from du
al%';
SQL_ID CHILD_NUMBER
04mpgrzhsv72w 0
SELECT * FROM TABLE(DBMS_XPLAN.DISPLAY_CURSOR('04mpgrzhsv72w',0,'TYPICAL'))
select 1 from dual where regexp_like (' ','^*[ ]*a')
NOTE: cannot fetch plan for SQL_ID: 04mpgrzhsv72w, CHILD_NUMBER: 0
Please verify value of SQL_ID and CHILD_NUMBER;
It could also be that the plan is no longer in cursor cache (check v$sql_p
lan)No plan...
Let's take a look at the 10053 trace file:
Registered qb: SEL$1 0x19157f38 (PARSER)
signature (): qb_name=SEL$1 nbfros=1 flg=0
fro(0): flg=4 objn=258 hint_alias="DUAL"@"SEL$1"
Predicate Move-Around (PM)
PM: Considering predicate move-around in SEL$1 (#0).
PM: Checking validity of predicate move-around in SEL$1 (#0).
CBQT: Validity checks failed for 7uqx4guu04x3g.
CVM: Considering view merge in query block SEL$1 (#0)
CBQT: Validity checks failed for 7uqx4guu04x3g.
Subquery Unnest
SU: Considering subquery unnesting in query block SEL$1 (#0)
Set-Join Conversion (SJC)
SJC: Considering set-join conversion in SEL$1 (#0).
Predicate Move-Around (PM)
PM: Considering predicate move-around in SEL$1 (#0).
PM: Checking validity of predicate move-around in SEL$1 (#0).
PM: PM bypassed: Outer query contains no views.
FPD: Considering simple filter push in SEL$1 (#0)
FPD: Current where clause predicates in SEL$1 (#0) :
REGEXP_LIKE (' ','^*[ ]*a')
kkogcp: try to generate transitive predicate from check constraints for SEL$1 (#0)
predicates with check contraints: REGEXP_LIKE (' ','^*[ ]*a')
after transitive predicate generation: REGEXP_LIKE (' ','^*[ ]*a')
finally: REGEXP_LIKE (' ','^*[ ]*a')
apadrv-start: call(in-use=592, alloc=16344), compile(in-use=37448, alloc=42256)
kkoqbc-start
: call(in-use=592, alloc=16344), compile(in-use=38336, alloc=42256)
kkoqbc-subheap (create addr=000000001915C238)Looks like the query never had a chance to start executing - it is still parsing after 20 minutes.
I am not sure that this is a good example - the query either executes very fast, or never has a chance to start executing. But, it might still make your point physical I/O is not always the problem when performance problems are experienced.
Charles Hooper
IT Manager/Oracle DBA
K&M Machine-Fabricating, Inc. -
How to run the query in screen painter
i am using the patch 36 in business one so pls give information about
how to run the query in screen painter
regard
sandip adhavHope u have reached Screen painter interface,
1. Click 'Add Grid' from tool bar.
2. Go to 'Collections' tab in 'Properties' window.
3. Choose 'Data Tables' from the Drop down list.
4. Click 'New' found at the bottom of the Properties Window(same window)
5. U'll find the place to insert ur query.
6. U can rename the table name from 'DT_0'
7. Choose type as 'Query'
8. Clear content from box 'Query'
9. Enter ur query there. Dont forget to Click 'SET'
10. Go to Preview option from tool bar.
now ur query will be displayed as table format.
Note: First try with simple query b4 going for linking option.
Regards,
Dhana. -
Hello
I have one query taking time to fetch the records. Table contains just 40,000 thousands records but lots of case statement in the query, I just remove lots of case statement there are lot more...
Can you please help me out to rewrite the query to fetch the records faster. Also Right now there are no indexes on the table....
SELECT O.cn,
O.BEN_LAST_NAME,
O.BEN_FIRST_NAME,
O.BEN_MI,
O.SSN,
O.DOB,
O.SEX,
CASE
WHEN O.SEX = 'F' AND O.AGE BETWEEN 00 AND 34 THEN
1
ELSE
0
END AS AGE_GROUP0_34_F,
CASE
WHEN O.SEX = 'F' AND O.AGE BETWEEN 35 AND 44 THEN
1
ELSE
0
END AS AGE_GROUP35_44_F,
CASE
WHEN O.SEX = 'F' AND O.AGE BETWEEN 45 AND 54 THEN
1
ELSE
0
END AS AGE_GROUP45_54_F,
CASE
WHEN O.SEX = 'F' AND O.AGE BETWEEN 55 AND 59 THEN
1
ELSE
0
END AS AGE_GROUP55_59_F,
CASE
WHEN O.SEX = 'F' AND O.AGE BETWEEN 60 AND 64 THEN
1
ELSE
0
END AS AGE_GROUP60_64_F,
CASE
WHEN O.SEX = 'F' AND O.AGE BETWEEN 65 AND 69 THEN
1
ELSE
0
END AS AGE_GROUP65_69_F,
CASE
WHEN O.SEX = 'F' AND O.AGE BETWEEN 70 AND 74 THEN
1
ELSE
0
END AS AGE_GROUP70_74_F,
CASE
WHEN O.SEX = 'F' AND O.AGE BETWEEN 75 AND 79 THEN
1
ELSE
0
END AS AGE_GROUP75_79_F,
CASE
WHEN O.SEX = 'F' AND O.AGE BETWEEN 80 AND 84 THEN
1
ELSE
0
END AS AGE_GROUP80_84_F,
CASE
WHEN O.SEX = 'F' AND O.AGE BETWEEN 85 AND 89 THEN
1
ELSE
0
END AS AGE_GROUP85_89_F,
CASE
WHEN O.SEX = 'F' AND O.AGE BETWEEN 90 AND 94 THEN
1
ELSE
0
END AS AGE_GROUP90_94_F,
CASE
WHEN O.SEX = 'F' AND O.AGE BETWEEN 95 AND 00 THEN
1
ELSE
0
END AS AGE_GROUP95_GT_F,
CASE
WHEN O.SEX = 'M' AND O.AGE BETWEEN 00 AND 34 THEN
1
ELSE
0
END AS AGE_GROUP0_34_M,
CASE
WHEN O.SEX = 'M' AND O.AGE BETWEEN 35 AND 44 THEN
1
ELSE
0
END AS AGE_GROUP35_44_M,
CASE
WHEN O.SEX = 'M' AND O.AGE BETWEEN 45 AND 54 THEN
1
ELSE
0
END AS AGE_GROUP45_54_M,
CASE
WHEN O.SEX = 'M' AND O.AGE BETWEEN 45 AND 59 THEN
1
ELSE
0
END AS AGE_GROUP55_59_M,
CASE
WHEN O.SEX = 'M' AND O.AGE BETWEEN 60 AND 64 THEN
1
ELSE
0
END AS AGE_GROUP60_64_M,
CASE
WHEN O.SEX = 'M' AND O.AGE BETWEEN 65 AND 69 THEN
1
ELSE
0
END AS AGE_GROUP65_69_M,
CASE
WHEN O.SEX = 'M' AND O.AGE BETWEEN 70 AND 74 THEN
1
ELSE
0
END AS AGE_GROUP70_74_M,
CASE
WHEN O.SEX = 'M' AND O.AGE BETWEEN 75 AND 79 THEN
1
ELSE
0
END AS AGE_GROUP75_79_M,
CASE
WHEN O.SEX = 'M' AND O.AGE BETWEEN 80 AND 84 THEN
1
ELSE
0
END AS AGE_GROUP80_84_M,
CASE
WHEN O.SEX = 'M' AND O.AGE BETWEEN 85 AND 89 THEN
1
ELSE
0
END AS AGE_GROUP85_89_M,
CASE
WHEN O.SEX = 'M' AND O.AGE BETWEEN 90 AND 94 THEN
1
ELSE
0
END AS AGE_GROUP90_94_M,
CASE
WHEN O.SEX = 'M' AND O.AGE BETWEEN 95 AND 00 THEN
1
ELSE
0
END AS AGE_GROUP95_GT_M,
O.YEAR,
CASE WHEN EXISTS (SELECT m1.hcc_model_category1 FROM HCC_MODEL_DIAGNOSIS M1 , HCC_MODEL_DIAGNOSIS_MAPPING HM
,mor222 m2 WHERE m1.map_id = hm.map_id_ref
AND m2.YEAR = hm.YEAR
AND o.cn = m2.cn
AND o.YEAR = hm.YEAR
AND m1.hcc_model_category1 = 1
AND m2.diag_code = m1.icd9cmscode) THEN 1 ELSE 0 END AS DISEASE_COEF_HCC1,
CASE WHEN EXISTS (SELECT m1.hcc_model_category1 FROM HCC_MODEL_DIAGNOSIS M1 , HCC_MODEL_DIAGNOSIS_MAPPING HM
,mor222 m2 WHERE m1.map_id = hm.map_id_ref
AND m2.YEAR = hm.YEAR
AND o.cn = m2.cn
AND o.YEAR = hm.YEAR
AND m1.hcc_model_category1 = 2
AND m2.diag_code = m1.icd9cmscode) THEN 1 ELSE 0 END AS DISEASE_COEF_HCC2,
CASE WHEN EXISTS (SELECT m1.hcc_model_category1 FROM HCC_MODEL_DIAGNOSIS M1 , HCC_MODEL_DIAGNOSIS_MAPPING HM
,mor222 m2 WHERE m1.map_id = hm.map_id_ref
AND m2.YEAR = hm.YEAR
AND o.cn = m2.cn
AND o.YEAR = hm.YEAR
AND m1.hcc_model_category1 = 5
AND m2.diag_code = m1.icd9cmscode) THEN 1 ELSE 0 END AS DISEASE_COEF_HCC5,
CASE WHEN EXISTS (SELECT m1.hcc_model_category1 FROM HCC_MODEL_DIAGNOSIS M1 , HCC_MODEL_DIAGNOSIS_MAPPING HM
,mor222 m2 WHERE m1.map_id = hm.map_id_ref
AND m2.YEAR = hm.YEAR
AND o.cn = m2.cn
AND o.YEAR = hm.YEAR
AND m1.hcc_model_category1 = 7
AND m2.diag_code = m1.icd9cmscode) THEN 1 ELSE 0 END AS DISEASE_COEF_HCC7,
CASE WHEN EXISTS (SELECT m1.hcc_model_category1 FROM HCC_MODEL_DIAGNOSIS M1 , HCC_MODEL_DIAGNOSIS_MAPPING HM
,mor222 m2 WHERE m1.map_id = hm.map_id_ref
AND m2.YEAR = hm.YEAR
AND o.cn = m2.cn
AND o.YEAR = hm.YEAR
AND m1.hcc_model_category1 = 8
AND m2.diag_code = m1.icd9cmscode) THEN 1 ELSE 0 END AS DISEASE_COEF_HCC8
FROM (SELECT T.cn,
T.BEN_LAST_NAME,
T.BEN_FIRST_NAME,
T.BEN_MI,
T.SSN,
TO_DATE(T.DOB, 'YYYYMMDD') AS DOB,
T.SEX,
TRUNC(MONTHS_BETWEEN(TO_DATE('01/01/' || T.YEAR, 'MM/DD/YYYY'),
TO_DATE(T.DOB, 'YYYYMMDD')) / 12) AS AGE,
T.YEAR
FROM mor111 T ) O Thanks in advance!
Kind regards,
NikOk, so I am going to be a little bit kinder then your first reply, but not much.
From what can tell you are doing medical management and are trying to select by AGE/GENDER CELLS and this is common when trying to deal with RBRVS.
This is by far some of the worst sql I have ever seen, sorry but it just is.
So please report this either as a new post or as a reply and:
1. At least post the table definitions and if you can some sample data.
2. Get rid of almost all the case selectors.
3. Describe the output you need.
As it is this is unreadable.
After that we can talk more.
Edited by: FlyingGuy on Oct 11, 2011 5:13 PM -
How to get the query result of improvement (Before and After ) using sql de
how to get the query result of improvement (Before and After ) using sql developer.
Check
http://www.oracle.com/technetwork/articles/sql/exploring-sql-developer-1637307.html -
How to get the Query output to Excel
Hi ,
Can you tell me how to get the Query output to excel with out using any third party tool?
Can you tell me how to write the code in Webservice and call it..
Please explain it Elaboartly..
Thanks in Advance!!!
Miniwhats your source system?
you can use Live office, or query as a webservice if you are getting data from universe
if you're getting data from SAP BI query and you have a java stack on your netweaver then you can get the data directly using sap bi connector in xcelsius.
good luck -
How to Automate the Query Search Upon Return to the Calling Form?
Greetings Ya’ll Gurus,
Could you please share with me how to make the Query Search executed automatically each time, when database table is updated, upon return to the “Calling Form” (i.e. FormA in this posting) from the “Called Form” (i.e. FormB from here on)?
I have FormA call_form to FormB. FormB may return to FormA. FormA allows users to enter the Query parameters and perform query Search to the database table with a list of search results afterward; whereas FormB allows users to add or delete the same database table records. Both form images are as follows:
FormA:
!http://dot.state.ak.us/nreg/jtomasic/FormA_DWR_SEL.GIF!
FormA call_form to FormB by clicking PB “Daily Work Report” (see circled PB "Daily Work Report" in the above image.)
FormB Image (FormB allows users to add and delete database records):
!http://dot.state.ak.us/nreg/jtomasic/FormB_DWR.GIF!
FormB EXIT_FORM and returns to FormA (see circled PB "DWR Selection" in above image).
Currently, our users must press the PB “Search” on FormA each time to refresh the Query “Search” results after returning to FormA, and they request to have the "Search" done automatically/programmatically upon return to FormA each time when the database table is updated.
If you have programming code on this and are willing to share or if you have any suggestion or thoughts on this, it would be most greatly appreciated.
Thanks a lot & Happy Holidays!Thanks so much Andreas, and yes, your link for calling a form and passing a context is very helpful. I believe, your suggested use of the global variable for the saved database table will work for the automation of the Query Search. I am, however, not sure how to make the code and the trigger to automatically perform Query PB "Search". The code for our current "WHEN-BUTTON-PRESSED" Trigger for the PB-Search of FormA is as following:
DECLARE
alert_button NUMBER;
alert_id ALERT;
MY_WHERE VARCHAR2(2500);
MY_DIST_ID DIST.DIST_ID%TYPE := :BLK_UPDATE.DIST_ID;
MY_ORG_ID DWR.ORG_ID%TYPE := :BLK_UPDATE.ORG_ID;
MY_ACTY_ID DWR.ACTY_ID%TYPE := :BLK_UPDATE.ACTY_ID;
MY_ACTY_WORK_ID DWR.ACTY_WORK_ID%TYPE := :BLK_UPDATE.ACTY_WORK_ID;
MY_CNTY_ID DWR.CNTY_ID%TYPE := :BLK_UPDATE.CNTY_ID;
MY_ASSET_GRP_ID DWR.ASSET_GRP_ID%TYPE := :BLK_UPDATE.ASSET_GRP_ID;
MY_ASSET_ID DWR.ASSET_ID%TYPE := :BLK_UPDATE.ASSET_ID;
MY_RTE DWR.RTE%TYPE := :BLK_UPDATE.RTE;
MY_BEG_MP DWR.BEG_MP%TYPE := :BLK_UPDATE.BEG_MP;
MY_END_MP DWR.END_MP%TYPE := :BLK_UPDATE.END_MP;
MY_FROM_DATE DWR.DWR_DATE%TYPE := :BLK_CONTROL.FROM_DATE;
MY_TO_DATE DWR.DWR_DATE%TYPE := :BLK_CONTROL.TO_DATE;
MY_FLAG_OFFSYS VARCHAR2(11) := :BLK_UPDATE.FLAG_OFFSYS;
MY_FLAG_COMMENTS VARCHAR2(11) := :BLK_UPDATE.FLAG_COMMENTS;
MY_SPECIAL_EVENT_SEQ_NO SPECIAL_EVENT.SPECIAL_EVENT_SEQ_NO%TYPE := :BLK_UPDATE.SPECIAL_EVENT_DESCR;
MY_FLAG_ACCDT VARCHAR2(11) := :BLK_UPDATE.FLAG_ACCDT;
BEGIN
:blk_control.dummy_flag := 1 ;
:BLK_CONTROL.DUMMY_ERR_FLAG := 'N';
VALIDATION_SELECTION; -- Program Unit VALIDATES DWR SELECTION PARAMETERS PRIOR TO
-- PERFORMING THE SEARCH AND POPULATING THE DISPLAY BLOCK
if :blk_control.dummy_flag = 1 then
IF :BLK_CONTROL.DUMMY_ERR_FLAG = 'N' THEN
MY_WHERE := BUILD_WHERE_CLAUSE(MY_DIST_ID,
MY_ORG_ID,
MY_ACTY_ID,
MY_ACTY_WORK_ID,
MY_CNTY_ID,
MY_ASSET_GRP_ID,
MY_ASSET_ID,
MY_RTE,
MY_BEG_MP,
MY_END_MP,
MY_FROM_DATE,
MY_TO_DATE,
MY_FLAG_OFFSYS,
MY_SPECIAL_EVENT_SEQ_NO,
MY_FLAG_ACCDT,
MY_FLAG_COMMENTS);
SET_BLOCK_PROPERTY('BLK_DISPLAY', DEFAULT_WHERE, MY_WHERE);
GO_BLOCK('BLK_DISPLAY');
CLEAR_BLOCK(NO_VALIDATE);
EXECUTE_QUERY(ALL_RECORDS);
IF :BLK_DISPLAY.DWR_SEQ_NO IS NOT NULL THEN
SET_ITEM_ON_OR_OFF('BLK_CONTROL.PB_PRINT', TRUE);
ELSE
SET_ITEM_ON_OR_OFF('BLK_CONTROL.PB_PRINT', FALSE);
alert_id := FIND_ALERT('no_data_query');
IF ID_NULL(alert_id) THEN
error_msg(1000);
ELSE
set_alert_message(alert_id, 1040);
alert_button := SHOW_ALERT(alert_id);
END IF;
END IF;
GO_BLOCK('BLK_UPDATE');
GO_ITEM('BLK_CONTROL.PB_SEARCH');
END IF;
end if;
END;My questions are:
After initializing, set and/or reset the global variable for the saved database table,
do I copy the above code (i.e. the "entire" code in the "WHEN-BUTTON-PRESSED" Trigger for the PB-Search) to the WHEN-NEW-FORM-INSTANCE-trigger, or other trigger(s), of FormA to automate the Query Search whenever there is a successful database commit/save? Or
is there a simple way to activate the code in the "WHEN-BUTTON-PRESSED" Trigger for the PB-Search of FormA? Or
is there a simple way to activate the EXECUTE_QUERY(ALL_RECORDS) command in the WHEN-NEW-FORM-INSTANCE-trigger or other trigger(s) of FormA ?
Thanks and always. -
Help to rewrite the query --performance issue
Hi ,
Please help to rewrite the query since it's performance is not good.Especially second inline query(CASE statements are therein select caluse ..)is taking more cost.
Database Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bi
SELECT *
FROM
(SELECT q.*,
COUNT(*) OVER() AS record_count,
ROWNUM AS row_num
FROM
(SELECT ExName.examiner_code,
examiner_name,
:v_year,
:v_month,
count_fb,
NVL(count_entered_fb, 0) count_entered_fb,
NVL(count_sent_fb, 0) count_sent_fb,
NVL(count_edited_fb, 0) count_edited_fb,
NVL(count_complete_fb, 0) count_complete_fb,
NVL(count_withibcardiff_fb, 0) count_withibcardiff_fb
FROM
(SELECT examiner_code,
COUNT(*) AS count_fb
FROM
(SELECT
examiner_code,
paper_code,
assessment_school
FROM
( SELECT DISTINCT ce.examiner_code,
ce.paper_code,
ce.assessment_school
FROM
(SELECT
DISTINCT assessment_school,
paper_code,
examiner_code
FROM candidate_examiner_allocation cea
WHERE cea.element = 'Moderation of IA'
AND cea.year = :v_year
AND cea.month = :v_month
) ce,
subject_group sg,
subject_component sc
WHERE (:v_padded_examiner_code IS NULL
OR ce.examiner_code = :v_padded_examiner_code)
AND (:v_subject_group IS NULL
OR sg.group_number = :v_subject_group)
AND sg.year = :v_year
AND sg.month = :v_month
AND sc.year = :v_year
AND sc.month = :v_month
AND sc.paper_code = ce.paper_code
AND sc.subject = sg.subject
AND sc.lvl = sg.lvl
AND (:v_subject IS NULL
OR sc.subject = :v_subject)
AND (:v_lvl IS NULL
OR sc.lvl = :v_lvl)
) ea
GROUP BY examiner_code
) ExName,
(SELECT examiner_code,
COUNT(
CASE
WHEN UPPER(wfi.status) = 'ENTERED'
THEN 1
ELSE NULL
END) AS count_entered_fb,
COUNT(
CASE
WHEN UPPER(wfi.status) = 'SENT'
THEN 1
ELSE NULL
END) AS count_sent_fb,
COUNT(
CASE
WHEN UPPER(wfi.status) = 'EDITED'
THEN 1
ELSE NULL
END) AS count_edited_fb,
COUNT(
CASE
WHEN UPPER(wfi.status) = 'COMPLETE'
THEN 1
ELSE NULL
END) AS count_complete_fb,
COUNT(
CASE
WHEN UPPER(wfi.status) = 'WITH IBCARDIFF'
THEN 1
ELSE NULL
END) AS count_withibcardiff_fb
FROM ia_instances ia1,
workflow_instance wfi
WHERE wfi.instance_id = ia1.workflow_instance_id
AND ia1.year = :v_year
AND ia1.month = :v_month
GROUP BY ia1.year,
ia1.month,
examiner_code
) iaF,
(SELECT person_code,
title
|| ' '
|| firstname
|| ' '
|| lastname AS examiner_name
FROM person
WHERE :v_examiner_name IS NULL
OR UPPER(title
|| ' '
|| firstname
|| ' '
|| lastname) LIKE :v_search_examiner_name
) P
WHERE ExName.examiner_code = iaF.examiner_code (+)
AND ExName.examiner_code = p.person_code
ORDER BY ExName.examiner_code
) q
) rc
WHERE row_num >= :v_start_row
AND row_num <= (:v_start_row+(:v_max_row-1));explain plan
line 1: SQLPLUS Command Skipped: set linesize 130
line 2: SQLPLUS Command Skipped: set pagesize 0
PLAN_TABLE_OUTPUT
Plan hash value: 1581970599
| Id | Operation | Name | Rows | Bytes |TempSpc| Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 1 | 276 | | 2187 (6)| 00:00:34 |
|* 1 | FILTER | | | | | | |
|* 2 | VIEW | | 1 | 276 | | 2187 (6)| 00:00:34 |
| 3 | WINDOW BUFFER | | 1 | 250 | | 2187 (6)| 00:00:34 |
| 4 | COUNT | | | | | | |
| 5 | VIEW | | 1 | 250 | | 2187 (6)| 00:00:34 |
| 6 | SORT ORDER BY | | 1 | 119 | | 2187 (6)| 00:00:34 |
| 7 | NESTED LOOPS | | 1 | 119 | | 2186 (6)| 00:00:34 |
|* 8 | HASH JOIN OUTER | | 1 | 92 | | 2185 (6)| 00:00:34 |
| 9 | VIEW | | 1 | 20 | | 51 (4)| 00:00:01 |
| 10 | SORT GROUP BY | | 1 | 7 | | 51 (4)| 00:00:01 |
| 11 | VIEW | | 1 | 7 | | 51 (4)| 00:00:01 |
| 12 | SORT UNIQUE | | 1 | 127 | | 51 (4)| 00:00:01 |
| 13 | NESTED LOOPS | | 1 | 127 | | 50 (2)| 00:00:01 |
|* 14 | HASH JOIN | | 1 | 68 | | 44 (3)| 00:00:01 |
|* 15 | TABLE ACCESS BY INDEX ROWID| SUBJECT_COMPONENT | 13 | 520 | | 40 (0)| 00:00:01 |
|* 16 | INDEX RANGE SCAN | SUBJECT_COMPONENT_ASSESS_TYPE | 1059 | | | 9 (0)| 00:00:01 |
|* 17 | INDEX RANGE SCAN | SUBJECT_GROUP_PK | 41 | 1148 | | 3 (0)| 00:00:01 |
|* 18 | INDEX RANGE SCAN | CEA_AUTOMATIC_ALLOCATION_STATS | 5 | 295 | | 6 (0)| 00:00:01 |
| 19 | VIEW | | 679 | 48888 | | 2133 (6)| 00:00:33 |
| 20 | SORT GROUP BY | | 679 | 25123 | | 2133 (6)| 00:00:33 |
|* 21 | HASH JOIN | | 52408 | 1893K| 1744K| 2126 (6)| 00:00:33 |
| 22 | TABLE ACCESS BY INDEX ROWID | IA_INSTANCES | 52408 | 1125K| | 688 (1)| 00:00:11 |
|* 23 | INDEX RANGE SCAN | IND_IA_INSTANCES | 49077 | | | 137 (2)| 00:00:03 |
| 24 | TABLE ACCESS FULL | WORKFLOW_INSTANCE | 1075K| 15M| | 960 (7)| 00:00:15 |
|* 25 | TABLE ACCESS BY INDEX ROWID | PERSON | 1 | 27 | | 1 (0)| 00:00:01 |
|* 26 | INDEX UNIQUE SCAN | PERSON_PK | 1 | | | 0 (0)| 00:00:01 |
Predicate Information (identified by operation id):
1 - filter(TO_NUMBER(:V_START_ROW)<=TO_NUMBER(:V_START_ROW)+(TO_NUMBER(:V_MAX_ROW)-1))
2 - filter("ROW_NUM">=TO_NUMBER(:V_START_ROW) AND "ROW_NUM"<=TO_NUMBER(:V_START_ROW)+(TO_NUMBER(:V_MAX_ROW)-1))
8 - access("EXNAME"."EXAMINER_CODE"="IAF"."EXAMINER_CODE"(+))
14 - access("SC"."SUBJECT"="SG"."SUBJECT" AND "SC"."LVL"="SG"."LVL")
15 - filter((:V_SUBJECT IS NULL OR "SC"."SUBJECT"=:V_SUBJECT) AND ("SC"."LVL"=:V_LVL OR :V_LVL IS NULL))
16 - access("SC"."YEAR"=TO_NUMBER(:V_YEAR) AND "SC"."MONTH"=:V_MONTH)
17 - access("SG"."YEAR"=TO_NUMBER(:V_YEAR) AND "SG"."MONTH"=:V_MONTH)
filter(:V_SUBJECT_GROUP IS NULL OR "SG"."GROUP_NUMBER"=TO_NUMBER(:V_SUBJECT_GROUP))
18 - access("CEA"."YEAR"=TO_NUMBER(:V_YEAR) AND "CEA"."MONTH"=:V_MONTH AND "SC"."PAPER_CODE"="PAPER_CODE" AND
"CEA"."ELEMENT"='Moderation of IA')
filter("CEA"."ELEMENT"='Moderation of IA' AND (:V_PADDED_EXAMINER_CODE IS NULL OR
"EXAMINER_CODE"=:V_PADDED_EXAMINER_CODE))
21 - access("WFI"."INSTANCE_ID"="IA1"."WORKFLOW_INSTANCE_ID")
23 - access("IA1"."YEAR"=TO_NUMBER(:V_YEAR) AND "IA1"."MONTH"=:V_MONTH)
25 - filter(:V_EXAMINER_NAME IS NULL OR UPPER("TITLE"||' '||"FIRSTNAME"||' '||"LASTNAME") LIKE :V_SEARCH_EXAMINER_NAME)
26 - access("EXNAME"."EXAMINER_CODE"="PERSON_CODE")
53 rows selectedHi,
please find the below rigjt explan paln.
PLAN_TABLE_OUTPUT
SQL_ID 2ct41vyyzqyh7, child number 0
SELECT * FROM (SELECT q.*, COUNT(*) OVER() AS record_count, ROWNUM AS row_num FROM (SELECT
ExName.examiner_code, examiner_name, :v_year, :v_month, count_fb, NVL(count_entered_fb,
0) count_entered_fb, NVL(count_sent_fb, 0) count_sent_fb, NVL(count_edited_fb, 0) count_edited_fb,
NVL(count_complete_fb, 0) count_complete_fb, NVL(count_withibcardiff_fb, 0) count_withibcardiff_fb FROM
(SELECT examiner_code, COUNT(*) AS count_fb FROM (SELECT
examiner_code, paper_code, assessment_school FROM ( SELECT DISTINCT
ce.examiner_code, ce.paper_code, ce.assessment_school FROM (SELECT
DISTINCT assessment_school,
paper_code, examiner
Plan hash value: 651311258
| Id | Operation | Name | Rows | Bytes |TempSpc| Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | | | | 2785 (100)| |
|* 1 | FILTER | | | | | | |
|* 2 | VIEW | | 4 | 1104 | | 2785 (7)| 00:00:43 |
| 3 | WINDOW BUFFER | | 4 | 1000 | | 2785 (7)| 00:00:43 |
| 4 | COUNT | | | | | | |
| 5 | VIEW | | 4 | 1000 | | 2785 (7)| 00:00:43 |
| 6 | NESTED LOOPS | | 4 | 476 | | 2785 (7)| 00:00:43 |
| 7 | MERGE JOIN OUTER | | 4 | 368 | | 2781 (7)| 00:00:43 |
| 8 | VIEW | | 4 | 80 | | 72 (3)| 00:00:02 |
| 9 | SORT GROUP BY | | 4 | 28 | | 72 (3)| 00:00:02 |
| 10 | VIEW | | 4 | 28 | | 72 (3)| 00:00:02 |
| 11 | SORT UNIQUE | | 4 | 508 | | 72 (3)| 00:00:02 |
| 12 | NESTED LOOPS | | 4 | 508 | | 71 (2)| 00:00:02 |
|* 13 | HASH JOIN | | 1 | 68 | | 44 (3)| 00:00:01 |
|* 14 | TABLE ACCESS BY INDEX ROWID| SUBJECT_COMPONENT | 13 | 520 | | 40 (0)| 00:00:01 |
|* 15 | INDEX RANGE SCAN | SUBJECT_COMPONENT_ASSESS_TYPE | 1059 | | | 9 (0)| 00:00:01 |
|* 16 | INDEX RANGE SCAN | SUBJECT_GROUP_PK | 41 | 1148 | | 3 (0)| 00:00:01 |
|* 17 | INDEX RANGE SCAN | CEA_AUTOMATIC_ALLOCATION_STATS | 30 | 1770 | | 27 (0)| 00:00:01 |
|* 18 | SORT JOIN | | 576 | 41472 | | 2709 (7)| 00:00:42 |
| 19 | VIEW | | 576 | 41472 | | 2708 (7)| 00:00:42 |
| 20 | SORT GROUP BY | | 576 | 21312 | | 2708 (7)| 00:00:42 |
|* 21 | HASH JOIN | | 52408 | 1893K| 1744K| 2701 (7)| 00:00:41 |
|* 22 | TABLE ACCESS FULL | IA_INSTANCES | 52408 | 1125K| | 1263 (6)| 00:00:20 |
| 23 | TABLE ACCESS FULL | WORKFLOW_INSTANCE | 1075K| 15M| | 960 (7)| 00:00:15 |
|* 24 | TABLE ACCESS BY INDEX ROWID | PERSON | 1 | 27 | | 1 (0)| 00:00:01 |
|* 25 | INDEX UNIQUE SCAN | PERSON_PK | 1 | | | 0 (0)| |
Predicate Information (identified by operation id):
1 - filter(TO_NUMBER(:V_START_ROW)<=TO_NUMBER(:V_START_ROW)+(TO_NUMBER(:V_MAX_ROW)-1))
2 - filter(("ROW_NUM">=TO_NUMBER(:V_START_ROW) AND "ROW_NUM"<=TO_NUMBER(:V_START_ROW)+(TO_NUMBER(:V_MAX_ROW)-1)))
13 - access("SC"."SUBJECT"="SG"."SUBJECT" AND "SC"."LVL"="SG"."LVL")
14 - filter(((:V_SUBJECT IS NULL OR "SC"."SUBJECT"=:V_SUBJECT) AND ("SC"."LVL"=:V_LVL OR :V_LVL IS NULL)))
15 - access("SC"."YEAR"=TO_NUMBER(:V_YEAR) AND "SC"."MONTH"=:V_MONTH)
16 - access("SG"."YEAR"=TO_NUMBER(:V_YEAR) AND "SG"."MONTH"=:V_MONTH)
filter((:V_SUBJECT_GROUP IS NULL OR "SG"."GROUP_NUMBER"=TO_NUMBER(:V_SUBJECT_GROUP)))
17 - access("CEA"."YEAR"=TO_NUMBER(:V_YEAR) AND "CEA"."MONTH"=:V_MONTH AND "SC"."PAPER_CODE"="PAPER_CODE" AND
"CEA"."ELEMENT"='Moderation of IA')
filter(("CEA"."ELEMENT"='Moderation of IA' AND (:V_PADDED_EXAMINER_CODE IS NULL OR
"EXAMINER_CODE"=:V_PADDED_EXAMINER_CODE)))
18 - access("EXNAME"."EXAMINER_CODE"="IAF"."EXAMINER_CODE")
filter("EXNAME"."EXAMINER_CODE"="IAF"."EXAMINER_CODE")
21 - access("WFI"."INSTANCE_ID"="IA1"."WORKFLOW_INSTANCE_ID")
22 - filter(("IA1"."MONTH"=:V_MONTH AND "IA1"."YEAR"=TO_NUMBER(:V_YEAR)))
24 - filter((:V_EXAMINER_NAME IS NULL OR UPPER("TITLE"||' '||"FIRSTNAME"||' '||"LASTNAME") LIKE :V_SEARCH_EXAMINER_NAME))
25 - access("EXNAME"."EXAMINER_CODE"="PERSON_CODE")
66 rows selected -
Hi ,
Below query is taking more time (4mins) for 41 rows returning and there is no full table scan .Can some one help to rewrite the query.
SELECT
esma.candidate AS candidate_additional_sample,
ccr.raw_mark,
ccr.split_session_year AS year,
ccr.split_session_month AS month,
ccr.paper_code,
ccr.assessment_school AS school_code,
get_cand_session_number(ccr.split_session_year,ccr.split_session_month,ccr.candidate) AS candidate_session_number,
ccr.candidate AS candidate_code,
c.firstname AS candidate_firstname,
c.lastname AS candidate_lastname,
ema.moderator_code,
ema.examiner_code,
csr.self_taught
FROM
ibis.candidate_component_reg ccr
INNER JOIN ibis.candidate_examiner_allocation cea
ON ccr.split_session_year= cea.year
AND ccr.split_session_month=cea.month
AND ccr.assessment_school=cea.assessment_school
AND ccr.paper_code= cea.paper_code
AND ccr.candidate = cea.candidate
INNER JOIN ibis.examination_paper ep
ON ccr.split_session_year= ep.year
AND ccr.split_session_month=ep.month
AND ccr.paper_code=ep.paper_code
INNER JOIN ibis.examiner_moderator_allocation ema
ON ema.year =cea.year
AND ema.month =cea.month
AND ema.no_lang_code=ep.no_lang_code
AND ema.examiner_code=cea.examiner_code
AND ema.year =ccr.split_session_year
AND ema.month =ccr.split_session_month
INNER JOIN ibis.candidate_subject_registration csr
ON ccr.split_session_year=csr.year
AND ccr.split_session_month=csr.month
AND ccr.main_school=csr.main_school
AND ccr.candidate=csr.candidate
AND ccr.subject=csr.subject
AND ccr.subject_option=csr.subject_option
AND ccr.lvl=csr.lvl
AND ccr.language=csr.language
INNER JOIN ibis.candidate c
ON ccr.candidate=c.candidate
LEFT OUTER JOIN ibis.exam_sample_mark_additional esma
ON ccr.split_session_year = esma.year
AND ccr.split_session_month = esma.month
AND ep.no_lang_code = esma.nolang_code
AND ccr.candidate = esma.candidate
WHERE
ccr.split_session_year=:v_year
AND ccr.split_session_month=:v_month
AND ccr.subject=:v_subject
AND ccr.subject_option=nvl(:v_subject_option,ccr.subject_option)
AND ccr.language=nvl(:v_language, ccr.language)
AND ccr.component=:v_component
AND ccr.lvl=:v_lvl
AND ccr.raw_mark IS NOT NULL
AND cea.examiner_code = :v_examiner_code
AND ((ccr.sampled='Y'
AND csr.self_taught='N'
AND EXISTS (SELECT 1 FROM ibis.subject_component sc
WHERE sc.assessment_method_id = 11
AND sc.assessment_type='INTERNAL'
AND ccr.split_session_year=sc.year
AND ccr.split_session_month=sc.month
AND ccr.paper_code=sc.paper_code
AND ccr.subject=sc.subject
AND ccr.subject_option=sc.subject_option
AND ccr.lvl=sc.lvl
AND ccr.language=sc.language
AND ccr.component=sc.component)
AND NOT EXISTS (SELECT 1 FROM ibis.cw_portfolio_template cpt
WHERE ccr.split_session_year = cpt.year
AND ccr.split_session_month = cpt.month
AND ccr.subject = cpt.subject
AND ccr.subject_option = cpt.subject_option
AND ccr.component = cpt.component
AND cpt.combined = 'Y')
AND NOT EXISTS (SELECT 1 FROM ibis.school_sample_mark ssm
WHERE ssm.year= ccr.split_session_year
AND ssm.month = ccr.split_session_month
AND ssm.paper_code = ccr.paper_code
AND ssm.candidate =ccr.candidate
AND ssm.examiner_sample = 'Y'))
OR (ccr.sampled='N'
AND csr.self_taught='Y'
AND EXISTS (SELECT 1 FROM ibis.subject_component sc
WHERE sc.assessment_method_id = 11
AND ccr.split_session_year=sc.year
AND ccr.split_session_month=sc.month
AND ccr.paper_code=sc.paper_code
AND ccr.subject=sc.subject
AND ccr.subject_option=sc.subject_option
AND ccr.lvl=sc.lvl
AND ccr.language=sc.language
AND ccr.component=sc.component)
AND NOT EXISTS (SELECT 1 FROM ibis.cw_portfolio_template cpt
WHERE ccr.split_session_year = cpt.year
AND ccr.split_session_month = cpt.month
AND ccr.subject = cpt.subject
AND ccr.subject_option = cpt.subject_option
AND ccr.component = cpt.component
AND cpt.combined = 'Y'))
OR (ccr.sampled='N'
AND EXISTS (SELECT 1 FROM ibis.subject_component sc
WHERE sc.assessment_method_id = 11
AND ccr.split_session_year=sc.year
AND ccr.split_session_month=sc.month
AND ccr.paper_code=sc.paper_code
AND ccr.subject=sc.subject
AND ccr.subject_option=sc.subject_option
AND ccr.lvl=sc.lvl
AND ccr.language=sc.language
AND ccr.component=sc.component)
AND EXISTS (SELECT 1 FROM ibis.cw_portfolio_template cpt
WHERE ccr.split_session_year = cpt.year
AND ccr.split_session_month = cpt.month
AND ccr.subject = cpt.subject
AND ccr.subject_option = cpt.subject_option
AND ccr.component = cpt.component
AND cpt.combined = 'Y')));
explain plan
line 1: SQLPLUS Command Skipped: set linesize 130
line 2: SQLPLUS Command Skipped: set pagesize 0
PLAN_TABLE_OUTPUT
Plan hash value: 2594643366
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 2 | 1036 | 34 (3)| 00:00:01 |
|* 1 | FILTER | | | | | |
|* 2 | HASH JOIN OUTER | | 2 | 1036 | 34 (3)| 00:00:01 |
| 3 | VIEW | | 2 | 974 | 32 (0)| 00:00:01 |
| 4 | CONCATENATION | | | | | |
|* 5 | FILTER | | | | | |
|* 6 | TABLE ACCESS BY INDEX ROWID | CANDIDATE_SUBJECT_REGISTRATION | 1 | 58 | 3 (0)| 00:00:01 |
| 7 | NESTED LOOPS | | 1 | 485 | 16 (0)| 00:00:01 |
| 8 | NESTED LOOPS | | 1 | 427 | 13 (0)| 00:00:01 |
| 9 | NESTED LOOPS | | 1 | 357 | 11 (0)| 00:00:01 |
| 10 | NESTED LOOPS | | 1 | 129 | 8 (0)| 00:00:01 |
| 11 | NESTED LOOPS | | 1 | 80 | 5 (0)| 00:00:01 |
|* 12 | INDEX RANGE SCAN | PK_EXAMINER_MODERATOR_ALLOC | 1 | 39 | 3 (0)| 00:00:01 |
|* 13 | INDEX RANGE SCAN | RFL_EP1 | 1 | 41 | 2 (0)| 00:00:01 |
| 14 | TABLE ACCESS BY INDEX ROWID| CANDIDATE_EXAMINER_ALLOCATION | 1 | 49 | 3 (0)| 00:00:01 |
|* 15 | INDEX RANGE SCAN | CANDIDATE_ALLOCATION_EXAMINER | 1 | | 2 (0)| 00:00:01 |
|* 16 | TABLE ACCESS BY INDEX ROWID | CANDIDATE_COMPONENT_REG | 1 | 228 | 3 (0)| 00:00:01 |
|* 17 | INDEX RANGE SCAN | SPLIT_SESSION_CANDIDATE | 1 | | 2 (0)| 00:00:01 |
| 18 | TABLE ACCESS BY INDEX ROWID | CANDIDATE | 1 | 70 | 2 (0)| 00:00:01 |
|* 19 | INDEX UNIQUE SCAN | CANDIDATE_PK | 1 | | 1 (0)| 00:00:01 |
|* 20 | INDEX RANGE SCAN | Y_M_CAND_SUBJ_LVL_OPTION | 1 | | 2 (0)| 00:00:01 |
|* 21 | FILTER | | | | | |
|* 22 | TABLE ACCESS BY INDEX ROWID | CANDIDATE_SUBJECT_REGISTRATION | 1 | 58 | 3 (0)| 00:00:01 |
| 23 | NESTED LOOPS | | 1 | 485 | 16 (0)| 00:00:01 |
| 24 | NESTED LOOPS | | 1 | 427 | 13 (0)| 00:00:01 |
| 25 | NESTED LOOPS | | 1 | 357 | 11 (0)| 00:00:01 |
| 26 | NESTED LOOPS | | 1 | 129 | 8 (0)| 00:00:01 |
| 27 | NESTED LOOPS | | 1 | 80 | 5 (0)| 00:00:01 |
|* 28 | INDEX RANGE SCAN | PK_EXAMINER_MODERATOR_ALLOC | 1 | 39 | 3 (0)| 00:00:01 |
|* 29 | INDEX RANGE SCAN | RFL_EP1 | 1 | 41 | 2 (0)| 00:00:01 |
| 30 | TABLE ACCESS BY INDEX ROWID| CANDIDATE_EXAMINER_ALLOCATION | 1 | 49 | 3 (0)| 00:00:01 |
|* 31 | INDEX RANGE SCAN | CANDIDATE_ALLOCATION_EXAMINER | 1 | | 2 (0)| 00:00:01 |
|* 32 | TABLE ACCESS BY INDEX ROWID | CANDIDATE_COMPONENT_REG | 1 | 228 | 3 (0)| 00:00:01 |
|* 33 | INDEX RANGE SCAN | SPLIT_SESSION_CANDIDATE | 1 | | 2 (0)| 00:00:01 |
| 34 | TABLE ACCESS BY INDEX ROWID | CANDIDATE | 1 | 70 | 2 (0)| 00:00:01 |
|* 35 | INDEX UNIQUE SCAN | CANDIDATE_PK | 1 | | 1 (0)| 00:00:01 |
|* 36 | INDEX RANGE SCAN | Y_M_CAND_SUBJ_LVL_OPTION | 1 | | 2 (0)| 00:00:01 |
|* 37 | INDEX RANGE SCAN | EXAM_SAMP_MARK_ADD_IOT_PK | 36 | 1116 | 1 (0)| 00:00:01 |
|* 38 | TABLE ACCESS BY INDEX ROWID | CW_PORTFOLIO_TEMPLATE | 1 | 46 | 4 (0)| 00:00:01 |
|* 39 | INDEX RANGE SCAN | YEAR_MON_PORTFOLIO_TEMPLATE | 1 | | 3 (0)| 00:00:01 |
|* 40 | TABLE ACCESS BY INDEX ROWID | SCHOOL_SAMPLE_MARK | 1 | 34 | 4 (0)| 00:00:01 |
|* 41 | INDEX RANGE SCAN | CAND_PAPER_YEAR_MONTH | 1 | | 3 (0)| 00:00:01 |
|* 42 | TABLE ACCESS BY INDEX ROWID | SUBJECT_COMPONENT | 1 | 96 | 4 (0)| 00:00:01 |
|* 43 | INDEX RANGE SCAN | SUBJECT_COMPONENT_PK | 1 | | 3 (0)| 00:00:01 |
|* 44 | TABLE ACCESS BY INDEX ROWID | CW_PORTFOLIO_TEMPLATE | 1 | 46 | 4 (0)| 00:00:01 |
|* 45 | INDEX RANGE SCAN | YEAR_MON_PORTFOLIO_TEMPLATE | 1 | | 3 (0)| 00:00:01 |
|* 46 | TABLE ACCESS BY INDEX ROWID | SUBJECT_COMPONENT | 1 | 87 | 4 (0)| 00:00:01 |
|* 47 | INDEX RANGE SCAN | SUBJECT_COMPONENT_PK | 1 | | 3 (0)| 00:00:01 |
|* 48 | TABLE ACCESS BY INDEX ROWID | SUBJECT_COMPONENT | 1 | 87 | 4 (0)| 00:00:01 |
|* 49 | INDEX RANGE SCAN | SUBJECT_COMPONENT_PK | 1 | | 3 (0)| 00:00:01 |
|* 50 | TABLE ACCESS BY INDEX ROWID | CW_PORTFOLIO_TEMPLATE | 1 | 46 | 4 (0)| 00:00:01 |
|* 51 | INDEX RANGE SCAN | YEAR_MON_PORTFOLIO_TEMPLATE | 1 | | 3 (0)| 00:00:01 |
Predicate Information (identified by operation id):
1 - filter("from$_subquery$_011"."SAMPLED"='Y' AND "from$_subquery$_011"."SELF_TAUGHT"='N' AND NOT EXISTS
(SELECT /*+ */ 0 FROM "IBIS"."CW_PORTFOLIO_TEMPLATE" "CPT" WHERE "CPT"."COMPONENT"=:B1 AND
"CPT"."SUBJECT_OPTION"=:B2 AND "CPT"."SUBJECT"=:B3 AND "CPT"."MONTH"=:B4 AND "CPT"."YEAR"=:B5 AND
"CPT"."COMBINED"='Y') AND NOT EXISTS (SELECT /*+ */ 0 FROM "IBIS"."SCHOOL_SAMPLE_MARK" "SSM" WHERE
"SSM"."MONTH"=:B6 AND "SSM"."YEAR"=:B7 AND "SSM"."PAPER_CODE"=:B8 AND "SSM"."CANDIDATE"=:B9 AND
"SSM"."EXAMINER_SAMPLE"='Y') AND EXISTS (SELECT /*+ */ 0 FROM "IBIS"."SUBJECT_COMPONENT" "SC" WHERE
"SC"."COMPONENT"=:B10 AND "SC"."SUBJECT_OPTION"=:B11 AND "SC"."LANGUAGE"=:B12 AND "SC"."LVL"=:B13 AND
"SC"."SUBJECT"=:B14 AND "SC"."MONTH"=:B15 AND "SC"."YEAR"=:B16 AND "SC"."PAPER_CODE"=:B17 AND
"SC"."ASSESSMENT_METHOD_ID"=11 AND "SC"."ASSESSMENT_TYPE"='INTERNAL') OR "from$_subquery$_011"."SAMPLED"='N'
AND "from$_subquery$_011"."SELF_TAUGHT"='Y' AND NOT EXISTS (SELECT /*+ */ 0 FROM
"IBIS"."CW_PORTFOLIO_TEMPLATE" "CPT" WHERE "CPT"."COMPONENT"=:B18 AND "CPT"."SUBJECT_OPTION"=:B19 AND
"CPT"."SUBJECT"=:B20 AND "CPT"."MONTH"=:B21 AND "CPT"."YEAR"=:B22 AND "CPT"."COMBINED"='Y') AND EXISTS (SELECT
/*+ */ 0 FROM "IBIS"."SUBJECT_COMPONENT" "SC" WHERE "SC"."COMPONENT"=:B23 AND "SC"."SUBJECT_OPTION"=:B24 ANDEdited byCan you please post the following scripts:
1. Tables structure (with all indexes & constraints)
2. Tables data
3. SQL trace file
possibly everything that one can need to regenerate the scenario on his own DB...
OR
spend some time with Oracle Docs on Performance Tuning and then resolve it yourself.
Regards,
Ankit Rathi
http://theoraclelog.blogspot.in -
How to fetch the query string in BW?
Hi Gurus,
How can fetch the query string from BW Server to implement Bex web application Iview.
*Now to get the information "BEx Web Application Query String". open the SAP Log on and open the BW Browser, double click any of the queries available, this will open a window and select the Query String ( it should be between & to end &).*
Explain the above point with more detail like how will open the bw browser what is the step for that?where the query string will available in BW browser.
Higher points will be rewarded for valuable inputs.
Thanks in Advance,
Dharanihi ,
What krishna suggested is right ... Another method can be like :
&CMD=LDOC&infocube=0D_DECU&query=SALES_DEMO_2
Get this information from your BI consultant.
Please close thread if you got ur answer!!!
Regards
Parth -
How to find the query name using infoset name
Hi Experts
Iam new to the sap queries(SQ01,SQ02), some queries already created.
now i want to do some modification, my problem is i am not able to find the query name.
I know the infoset name, can you tell me how to find the query name using the infoset name, is ther any table for this.
i tried in sq01 also, but its confusion, pls advice me on this.
thanks in advance.
regards
rajaramHi
try like this..
SQ02 --> go to --> Query Directory..
from there you can get all the queries belong to a Infoset. -
How to fetch the query by a report
Post Author: gionnyDeep
CA Forum: Data Connectivity and SQL
How to fetch the query by a report.I need to manipulate it and pass it again to the report.
Any idea?Post Author: gionnyDeep
CA Forum: Data Connectivity and SQL
I just need to get the query of a report.
You know that a report is buld up on a sql query.I just want to know how to get that query starting by a java ReportClientDocument.
And I found reportClientDoc.getDatabaseController().getDatabase() to fetch DataBase object .After that I do not know the exact sequence of methods for fetch the query
Sorry for my english
Maybe you are looking for
-
2 users with same User ID, Big Problems
I currently have User A from macbook 1 (old user I no longer use) and User B from macbook 2 and 3 (new user I've been using for ~4 years). I had upgraded from macbook 1 to 2 to 3 and am currently running 10.9.5 I thought I had deleted User A through
-
Backend is sending CRM stuff to SRM
Hello, we have landscape with backend 4.7, CRM and SRM. The problem is that backend system is sending SD information not only to CRM but also to SRM. This is causing short dumps in SRM because functions necessary for that call are inactive. It will n
-
Error : Severity and Description Path Resource Location Creation Time Id
i have this error : Severity and Description Path Resource Location Creation Time Id invalid character or markup found in script block. Try surrounding your code with a CDATA block. essai/src essai.mxml Unknown 1236103965593 182 my source is attach c
-
Templated report not showing static text/objects on inheriting reports
Post Author: linksfield-leon CA Forum: Crystal Reports I have created some basic templates with style/font for all objects on the report as well as some static heading information with parameter fields which will be used in all inheriting reports.How
-
I installed a new hard drive and trying to reinstall FCP2 and on the install disc i get the following message - "You can't open the application FC Studio.mpkg because power PC applications are no longer supported"