How to rotate objects?
Extremely basic question I'm guessing.
Simply need to rotate an object by a few degrees. Every time
I do this the object increases in size.
Don't want it to change size, just rotate.
Help documentation didn't seem to offer any insight into how
this works.
I think my questions is even more simple than that...
Not looking to have an object rotate, move, etc...
Just placing things on the stage. Wanted a rectangle drawing
object to be rotated slightly.
Using the "free transform" tool causes the object to
both
rotate
and
increase in size.
Is it possible to simply rotate an object on the stage
(without doing anything else to it ... just rotate it)?
Similar Messages
-
How to rotate objects or pictures on my FP?
Hi there,
i'd like to rotate objects on my front panel programmatically, e.g. a pasted arrow to indicate a direction . As an alternative i could imagine to rotate a picture in some kind of AcvtiveX control. does anybody got a clue?
thanks
chris
Best regards
chris
CL(A)Dly bending G-Force with LabVIEW
famous last words: "oh my god, it is full of stars!"Rotating an arbitrary picture is just a transformation, should also be easy.
I made a quick example (LabVIEW 7.1), see if it makes sense. Message Edited by altenbach on 03-22-2005 10:11 AM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
RotateImage.vi 80 KB -
Noob question, can't rotate object clockwise. Please see the pictures below.
Hello everybody!
I'm stuck at rotating objects as I tried to follow a tutorial.
I think the answer is very simple, but because of my weak English, i can't even figure it out how to search for it on Google. tio
So my question is how to rotate objects like this:
Instead of this (That's how i can only rotate this object.):
Thanks in advance!zollre,
- before the value gives you clockwise. Basically, rotate angles are counterclockwise (with an implied + before the value).
-20 degrees corresponds to 340 degrees (almost a full round counterclockwise). -
I can't figure out how to rotate an object in Adobe Muse. I want an object to be half a bubble off plumb.
Hi ,
You can rotate an object in Muse by using the Transform toolbar and selecting the rotation angle. Please refer to this screenshot :- http://prntscr.com/52vtux
However, if you want to create a circular looking object , then all you need to do is, set the corners as Rounded, Make the Height and Width Equal and then increase the corner radius. This would give you the desired result.
Please refer to this screenshot :- http://prntscr.com/52vu9n
Hope this helps
Regards,
Rohit Nair -
How to always rotate objects around the same point, even using the right-click menu?
I need some of my objects to always rotate around the same point. How can I select a point which will stay that way?
Using the rotate tool resets after deselecting.
Also, I'd like to rotate objects around a certain point even when using the right click > Transform > Rotate.
Is it possible?Right, so this is where Illustrator falls short with respect you your need, but only in the sense that the reference point can't be made to stick. You can, however, use Smart Guides to make it so the point is easy to set at exactly the same location, (especially since your object has an anchor point there), manually before each rotation.
-
HT4641 How do I rotate objects and text ?
I do not know how to rotate my document too change to landscape . Want 11.5 x 8 . Thanks, Bill
You don't rotate the document on an iPad; you can rotate the objects on the document.
That said, you can't rotate in-line text and headers and footers, only text boxes and images/shapes.
To rotate the document, you will need to export it to a Mac and change the orientation there in Page Setup. The iPad document setup is lacking this feature.
Sorry. -
How to rotate a art board in a illustrator using adobe extended javascript
How to rotate a art board in a illustrator using adobe extended javascript
how to create mirror image of each textframe content of artboard1. there's no "Rotate" function, you have to rotate all your objects and then "resize" your artboard to simulate rotation.
2. there's no "Reflect" function either, to make "mirror" images, use the ScaleMatrix function, see this post
Reflect whole objects -
Rotating object to follow mouse
Okay, say I have an object (a bee in this case) that I want
to follow the
mouse around, that part's easy:
property my,oldLoc
on beginSprite me
my = sprite(me.spriteNum)
oldLoc = my.loc
end
on exitFrame me
my.loc = the mouseLoc
if diff(my.locV,oldLoc.locV) + diff(my.locH,oldLoc.locH)
> 5 then
my.member = "BeeBuzz"
else my.member = "BeeStill"
oldLoc = my.loc
end
It even includes a cute little function to make the wings
buzz when it's
moving, and not when it's standing still. The tricky part is
I want to have
some way of making the bee rotate to move in the direction
the mouse moves.
This seems to *almost* work, except that when the locV
doesn't change, it
results in a divide-by-zero error:
my.rotation = atan((oldLoc.locH - my.locH) / (oldLoc.locV -
my.locV)) *
57.2958
I could check and artificially add a small amount to avoid
the
divide-by-zero, but that seems like a hash. Is there a better
way to do
this correctly?
(And does anybody mind if I rant a bit about how all rotation
properties in
the program operate in degrees, while all the trig functions
operate in
radians? And the program doesn't include a method to convert
between them
either. That's just annoying.)Thanks. I generally try to avoid the Library behaviors
because I've found
that they mostly seem to be 98% unnecessary error-checking
and 2% functional
code, and it can often be very difficult to find and extract
that tiny
little bit of code that actually DOES anything. However, in
this case I was
able to pull a bit of useful code out of the Turn Towards
Mouse behavior -
extremely simplified of course. It didn't work at all out of
the box. For
the record, the code I used looks like this:
angle = GetAngle(oldLoc - my.loc) - 90
if my.rotation <> angle then my.rotation = angle
With the following code copied (mostly verbatim, but
simplified) from the
Turn Towards Mouse:
on GetAngle slope
deltaH = slope[1]
deltaV = slope[2]
if deltaH then
slope = float (deltaV) / deltaH
angle = atan (slope)
if deltaH < 0 then angle = angle + pi
else
if deltaV > 0 then angle = pi / 2
else if deltaV < 0 then angle = (3 * pi) / 2
else angle = 0
end if
return (angle * 180) / pi
end GetAngle
It seems to do pretty much what my original code did, only it
considers
those divide-by-zero situations separately as special cases.
Still seems
like more code than should be necessary to do what it does -
this feels like
the sort of thing that should be possible with 1-2 lines of
code, but
apparently it's not that simple... -
Hello,
i have developed a smartform, but the customer need printing the form rotated 90º to left. I have set up the page to landscape format but i don´t know how to rotate the others object of the form.
How can i do it?
Thanks.hi,
try the following steps :-
1. Goto your PAGE node.
2. double-click it.
3. under 3 tabs, there is middle tab 'OUTPUT OPTIONS'
4. In that u will have 2 RADIO BUTTONS
In that choose
LANDSCAPE FORMAT.
hope it helps !!!!!!!!
regards,
prashanti -
Rotate object by Reference Point?
I did a search on the forum on how to rotate an object by % using one of the object's reference points but came up empty.
It seems like something I've overlooked. I'm sure there's data on it, but I can't find it. Can anyone show me how to do this.
Thanksapp.layoutWindows[0].transformReferencePoint = AnchorPoint.topLeftAnchor;
myObject.rotationAngle = 30;
Peter -
How to show object creation in UML
How to show object creation in UML
In a sequence diagram, it's a line (with arrow) pointing to the new object and the <creates> or <new> tag as mentioned above.
| obj 1 |
|
| <creates> ----------
| --------------> | obj 2 |
| ----------or----------
| obj 1 |
|
| <new> ----------
| --------------> | obj 2 |
| ---------- -
How to rotate a text in the adobe reader for mobile ios ?
how to rotate a text in the adobe reader for mobile ios ?
There's no rotate command to rotate the document. Instead, rotate the iPad. If it doesn't rotate, turn off the Rotation Lock switch on the side of your iPad.
-
Does anyone know if/how to rotate a video clip in iphoto? I shot it so that it plays sideways on my computer and I cannot figure out how to rotate it. Thanks.
You can't do that in iPhoto. You'll need a video editor like iMovie for the job.
Regards
TD -
How to rotate photos in albums?
how to rotate photos in albums??
yes, i can downloaded the photo(s) and use preview or iphoto ot some other program to rotate each one, but it seems so awkward, inelegant and SLOW, just to take a quick peek at the five separate photos that someone sends.
is there really not an app or some similar thing to help? i recall downloaded an app for explorer on windows, to take care of the same problem... -
How to rotate photos in photostream so they don't show sideways on apple tv
how to rotate photos in photostream so they don't show sideways on apple tv? i am viewing my photos on my tv and many of them are sideways. how do i fix this?
ihint
Welcome to the Apple Discussions.
You'll need an application that edits the pics to do this: Acorn, Seashore, Photoshop Elements, Graphic Coverter are some, but there are many others - search on MacUpdate
Of course, iPhoto will do this too.
Regards
TD
Maybe you are looking for
-
A disk in the DVD drive causes a crash, machine will not start
I have a fairly bizarre problem, searched, didn't find it in here so... maybe I am special. Anyway. I have a 2.4ghz MBP with 4GB of memory. I got it in November (with Leopard). It has worked without an issue until I started tonight to give bootcamp a
-
Importing data from one table to another in the same schema
I know this possibly very simple, but I can't seem to figure it out. I have two tables; one with live user data and another, identical except name, with archive data. I want to export data that has been flagged from table 1 and archive it by importin
-
Move from one account to another?
My wife just purchased a MacBook Pro for her home based business. She has a personal iTunes account and would like to open a new one under her business account. Can she transfer all her music from her personal account to her business account?
-
I have to set up a partition on my new iMac to get a piece of business software to load. I tried Crossover and Parallels. Set up a 250 GB partition in Bootcamp and things seemed to be going fine with the windows 7 Ultimate loading but then i get a me
-
Does iphone5 have a slide show option for photos?
Iphone 5 photo slide show option is not showing is a slide show option suppose to be on I phone 5 for photo ?