How to run Assignment in Series - Workflow can not connect two Assignments
Here is my scenario:
I have a custom repository with no Taxanomy table.
I want to run series of Assignments.
I defined 5 assignments.
Thought that I can use MDM Workflow to call them in series. However MDM Workflow does not let me connect one Assignmen Task to next Assignment Task.
How to run Assignments in Series, either using Workflow or by using someother mechanism.
Idealy it could have been nice to Group the Assignments like Validation.
Or even Much better powerful Assignment and Validation Script. Add "Script Documentation" to that please.
Thanks,
Abhay
I tested with 2 assignments.
I created 2 assignments.
My workflow definition has a Start, Assign1, Assign2, Stop.
Start -> Assign1
Assign1 -> Assign2
Assign2-> Assign3
They are connected in Series.
Make sure all the steps are connected properly.
I executed the workflow and the two fields in the table got the assigned values as the result of the workflow.
Check the version of your Data Manager. The DataManager I used to test this is of version 5.5.34.26.
A single workflow should suffice for your requirements.
However, there is a workaround for this.
You create 5 workflows each with a single assingment step.
For the <b>Stop Step</b> in the Workflow you have <b>Launch</b> Property.
In this case, for workflow1 you set the launch property to Workflow2.
For workflow2 set the launch property as workflow3.
This way you are calling separate workflows sequentially.
Similar Messages
-
Can not connect two computers to net at same time
I have a desktop and laptop connected to router. I can only have one on the net at a time. If one is one and I try to connect the other it will disconect or say busy. Any suggestions?
Make sure your modem is connected to the "Internet" port on the router, not one of the numbered ports.
Are you using any fixed LAN IP addresses? If so, list the addresses that you use and also list your DHCP server range. -
Laserjet Pro 400 MFP M425DN Can not connect to HP Web Services
I have a Laserjet Pro 400 MFP M425DN printer on a network running windows 7 and we Can not connect to HP Web Services. When we use the display on the menu it comes back with error "Internal Processing error, try again or check firmware update" We installed the new firmware but still get the same message. IF type in our printers IP address into our browser we get the info on our printer but if we go to the HP web services tap and click enable it trys but come back with a "connection error"
Any ideas?
Thanks
PaulI just updated my Firmware on this printer today to the latest version dated May 3 2013 and Web Services
worked. Had the same type of problem you had for months and had worked with HP but could never get
Web Services to work at my location with my Modem/Router.
Had tried at other locations and it would work with the old Firmware. But for some reason it did not at my
location with the Modem/Router I was using.
Again the latest Firmware fixed it. I tried all the other solutions that I had found on the internet and non of them worked. -
My ipad recognizes my home network but will not connect to the internet. When I click on AirPort/preferences at the top of the imac screen it says..."AirPort has a self-assigned ip address and may not connect to the internet". If this is the root of the problem,how can I change ip address?
Ipad will connect no problem to other networks.First thing you need I think is to get your iMac connected to the Internet.
Shut down your iMac and you iPad. Then power off your router. Wait 30 seconds and power up the router.
After the router indicates that it is connected to the Internet then start up your iMac and see if it connects. If the iMac connects to the Internet then your iPad should too.
If this power up sequence doesn't work you'll have to dig into the router setup to make sure it is working properly. -
Hi. How come iTunes keeps saying:"this iPod can not be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64 bit version of iTunes?" Wth...i am using the 64 bit version of itunes. Why does it keep saying that? Will someone Help me please!? This is is getting frustrating. I already had done a full removal of everything! I even removed and deleted my library...then had to put all 500 songs back on one by one. So, i don't have to remove everything again, just to get my ipod to work on here. You, know before the itunes update, my ipod and itunes were working just fine.
wow, that was a quick reply. lol. but i have removed everything. I wasn't even able to get iTunes on my computer for a little while. i kept getting errors on that. Now it's saying that the required software isn't installed. Hmm, could it be referring to Apple Mobile Device Support? That is supposed to be installed with when iTunes gets installed right? I only ask, because that didn't get installed with the itunes setup.
-
I have a 4s iPhone which I loaded the new Os on last night. Now I can not connect to iTunes. A message comes up saying i need 10.6.3 or later but I am running 10.6.1 as I have an older Mac. Anyone have ideas how to get this to work?
Its not telling you to update your iPad, its telling you you need to download a recent version itunes on your computer.
Go here to download the newest version of iTunes.
http://www.apple.com/itunes/?cid=OAS-US-DOMAINS-itunes.com -
Will a program mention for MAC OSX be allowed to download on the newest iPad version. If so, how do I get past the "safari" can not download this file?
No, because iPads do not run Mac OS X. They run iOS.
-
My imac running lion can not connect to a Windows PC on my network
My imac runing lion 10.7 can not connect to my Windows 7 pc on my network. When i select connect to server, I can see the windows computer but when i try to connect, i get the error message:
Connection failed. There was a problem connecting to the server. Ther server may not exist or is unavailable at this time. Check the server name or IP address, check your network connection and try again.
I entered smb:// computer name and I tried smb://IP address. Neither would connect.
I am able to connect to the imac from my Window PC and access files but not I can not connect my iMac to the Windows PC.
I am trying to connect the two computers so that I can use a printer that is attached to the Windows 7 pc.
When I first downl;oaded and installed Lion, I was able to connect to the Windows 7 pc and use the printer attached to it.
I have tried 5 or 6 different suggestions to no avail. Both computers are up to date and the printer drivers are up to date.
Please let me know if there is a solution.Be sure to make the network Workgroup name on the Mac and Windows boxes the same.
On the Mac it is in System Preferences, Network Preferences, Advanced, WINS
On the Windows machine check in the Control Panel where you will also find the Computer name listed. I don't have my PC running right now, so I am not sure exactly where it is. Only assign a Workgroup, do not create a Domain.
You can also search in Windows for Workgroup.
I can link/network Lion to Win7 and vice versa without any problems. -
Mac OS X Lion[360] Can not connect to /var.run/systemkeychaincheck.socket
I have cleaned my hard disk, and want to install a clean OS X Lion via the Internet, but it shows this error:
Mac OS X Lion[360] Can not connect to /var.run/systemkeychaincheck.socket
and the time is still at : remains about 103 hours and 36 mins.No, I do not know why.
I installed a new copy of Lion via USB Flash Installer. I have no iead about how to fix this problem. -
I can't get iCloud to turn on. When I try to start it I gat a message "can not connect to server". How do I start the cloud?
So what model and year is your machine?
Here are the requirements for ML:
http://www.apple.com/osx/specs/ -
I would like to transfer the music that is already on my iPod touch to a new computer. At present, my iPod touch is not recognised on the new computer. How do I resolve that so I can literally connect it to my new computer and transfer all my music? Any help is much appreciated.
I would like to transfer the music that is already on my iPod touch to a new computer. At present, my iPod touch is not recognised on the new computer.
It doesn't quite work that way. Transfer your music from the old computer to the new one. Then, sync the iPod.
iTunes: How to move your music from one computer to another:
http://support.apple.com/kb/HT4527 -
how can I connect two thunderbolt monitors to my macmini in windows 8 and bootcamp? Works fine in OSX
Did you try to hook up both monitors to the Belkin adaptor? Trying will determine if your monitor has a bad input port. See if the Belkin adaptor is the problem. I have never used that specific adaptor, but I have always had luck with the Dr. Bott's DVI for ADC adaptor. Best of luck.
www.drbott.com -
Dear Fellas:
I received "database error #2002 can not connect local mysql server to socket through '/var/run/mysqld/mysqld.sock'(2)" on mac os x 10.9.2.
mysql info:
ps -ef | grep mysql
0 66 1 0 11:06AM ?? 0:00.04 /bin/sh /usr/local/mysql/bin/mysqld_safe --user=mysql
74 225 66 0 11:06AM ?? 0:02.50 /usr/local/mysql/bin/mysqld --basedir=/usr/local/mysql --datadir=/usr/local/mysql/data --plugin-dir=/usr/local/mysql/lib/plugin --user=mysql --log-error=/usr/local/mysql/data/Chuans-MacBook-Pro-2.local.err --pid-file=/usr/local/mysql/data/Chuans-MacBook-Pro-2.local.pid --socket=/var/run/mysqld/mysqld.sock
501 952 947 0 3:52PM ttys000 0:00.00 grep mysql
Please help!!Fascinated and guessing:
Something related to sock(2) because that's not part of your copied info. I'm thinking you've doubled up on sockets and the second socket doesn't exist, meaning you should be connecting to the first socket "mysqld.sock" whether automatic or not.
I've only used GUI tools on purpose, so does this mean you've already got MySQL running and you tried to launch it again manually? Perhaps you already have one instance of a db and you're trying to launch a second instance, and the two can't coexist with a single user local db?
Assuming this is all local, I'd shut down the db service and restart it, out of hand. I've seen similar messages when I set the db to start up on boot, and it didn't finish shutting down when I tried to restart it manually. Usually the GUI won't let me turn it on because it reports it's already running, but in that case it hadn't finished performing what the GUI was reporting.
Just speculating. -
the ipod is disabled, when i plug it in to my pc it says it can not connect without the passcode being put into the ipod, how do i fix it?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
Apple Tv is telling me it can not connect to the server. How do I fix that?
I changed my apple id and after I did, now my apple tv says it can not connect to the server when I try to view my purchases. Hulu and netflix work so the internet is working fine. My phone and ipad also work fine with the new id. Does anyone know how to make my apple tv purchases come back?
Power cycle the router and the ATV.
If the issue continues on the ATV go to Settings > General > Reset
Maybe you are looking for
-
Why is my Bluetooth no longer pairing with my iPhone 5?
Why is my bt not pairing with my iPhone 5? I've tried everything,but nothing works.
-
Is there a way to add text to pdf templates?
A client of mine wanted a invoice template. I designed it in indesign with such things as Date: Company name: and my client would like to then add the information in after the text. I hope this makes sense. Is there a way to supply a temp
-
Patches on Oracle 10.2 for 10.2.0.4
Hi I have to upgrade oracle from 9.2.0.7 to 10.2.0.4. I have downloaded 5 CD for Oracle 10.2 with name Ex: 51031678_*. I have also downloaded client with which is:OCL10232 I also need to apply patches to put oracle to 10.2.0.4. I had put the forum fo
-
New Mac mini & New Wireless Keyboard - can't complete setup
I just picked up a new Mac mini, and a new Apple wireless keyboard. I'm setting up the mini for the first time and i can't complete the setup because the new wireless keyboard doesn't seem to be recognized during the initial mini setup process. Shoul
-
Hi, According to the following excerpt, every time we call BEx via a transaction iView from the Portal (with tcode RRMX), we get a separate R/3 window with the tcode S000. Sourced from https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/libra