How to run html programs in safari?

how to open a html file in safari..??

Contrary to what BobTheFisherman says, a HTML file does not need to be served by a web server. If the HTML file is on a local disk (i.e. internal hard-drive, or usb-drive) or even if it's on a network shared folder that you can access, you only need to type the path into the address bar in Safari, in this format:
file:///<path to file>
Alternatively, and more simply, locate the file in Finder and drag it into Safari's main window.

Similar Messages

How to run html 5 on Safari

Arsenal website asks for html 5 to run their videos. Is there an easy way to run it on Yosemite with Safari. Please can anyone help?

It says you have to sign up to play. Not me.
The site does not list Safari as being supported:
Mac OS X
Processor: Intel Core2 Duo 1.83GHz or faster processor
Operating System: Mac OS X 10.5 or greater with Intel Processors of 1GHz or better; no PowerPC support
RAM: 512 MB minimum
Video Card: 32 MB minimum
Browser: Internet Explorer (version 7, 8 & 9), Mozilla Firefox (version 3.6 or higher), Chrome version 5
Flash: 9.0.115 or higher (10.1 or later recommended)

My safari browser seems to have been taken over by a malicious program called only-search. Does any one know how to uninstall this program from safari? I am running osX 10.10.

My safari browser seems to have been taken over by a malicious program called only-search. Does any one know how to uninstall this program from safari? I am running osX 10.10.

There is no need to download anything to solve this problem.
You may have installed the "VSearch" trojan. Remove it as follows.
Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Step 1
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Reset the home page and default search engine in all the browsers, if it was changed.
Step 2
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Internet criminal behind VSearch has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

How to run native program with Java program?

Hello
I've got following problem. I'd like to write file browser which would work for Linux and
Windows. Most of this program would be independent of the system but running programs not. How to run Linux program from Java program (or applet) and how to do it in Windows?.
Cheers

Try this:
Runtime rt = Runtime.getRuntime();
Process proc = rt.exec("ls -l");
InputStream stream = proc.getInputStream();
InputStreamReader isr = new InputStreamReader(stream);
BufferedReader br = new BufferedReader(isr);
String line = null;
while ( (line = br.readLine()) != null) .....
"if the program you launch produces output or expects input, ensure that you process the input and output streams" (http://www.javaworld.com/javaworld/jw-12-2000/jw-1229-traps.html)

How to run Struts program with the help of tomcat

Hello Everybody
This is Adesh.I am a newcomer of java and facing a problem with struts, so if any one know how to set the path of struts and how to run struts program, so plz inform me.
THX in Advance.............................................

struts-config.xml
<struts-config>
<action-mappings>
     <action path = "/welcome"
                type = "Welcome"
                scope="session">
            <forward name="success" path=".welcome"/>
            <forward name="failure" path=".base.error"/>
     </action>
</action-mappings>
    <plug-in className="org.apache.struts.tiles.TilesPlugin">
        <set-property property="definitions-config" value="/WEB-INF/tiles-defs.xml"/>
        <set-property property="definitions-debug" value="1"/>
        <set-property property="definitions-parser-details" value="0"/>
        <set-property property="definitions-parser-validate" value="true"/>
    </plug-in>
</struts-config>tiles-defs.xml
<tiles-definitions>
     <definition name = ".base" path = "/include/template.jsp">
          <put name = "title" value = "${title}"/>
          <put name = "header" value = "/include/top.jsp"/>
          <put name = "body" value = "${body}"/>
          <put name = "footer" value = "/include/footer.jsp"/>
     </definition>
</tiles-definitions>web.xml
<servlet>
        <servlet-name>action</servlet-name>
        <servlet-class>org.apache.struts.action.ActionServlet</servlet-class>
        <init-param>
            <param-name>config</param-name>
            <param-value>/WEB-INF/struts-config.xml</param-value>
        </init-param>
<init-param>
            <param-name>definitions-config</param-name>
            <param-value>/WEB-INF/tiles-defs.xml</param-value>
        </init-param>
        <load-on-startup>1</load-on-startup>
    </servlet>
<servlet>
        <servlet-name>init</servlet-name>
        <servlet-class>Init</servlet-class>
        <load-on-startup>2</load-on-startup>
    </servlet>
    <servlet-mapping>
        <servlet-name>action</servlet-name>
        <url-pattern>*.do</url-pattern>
    </servlet-mapping>
<jsp-config>
    <taglib>
        <taglib-uri>/WEB-INF/struts-bean.tld</taglib-uri>
        <taglib-location>/WEB-INF/struts-bean.tld</taglib-location>
    </taglib>
    <taglib>
        <taglib-uri>/WEB-INF/struts-html.tld</taglib-uri>
        <taglib-location>/WEB-INF/struts-html.tld</taglib-location>
    </taglib>
    <taglib>
        <taglib-uri>/WEB-INF/struts-logic.tld</taglib-uri>
        <taglib-location>/WEB-INF/struts-logic.tld</taglib-location>
    </taglib>
    <taglib>
        <taglib-uri>/WEB-INF/wall.tld</taglib-uri>
        <taglib-location>/WEB-INF/wall.tld</taglib-location>
    </taglib>
    <taglib>
        <taglib-uri>/WEB-INF/c.tld</taglib-uri>
        <taglib-location>/WEB-INF/c.tld</taglib-location>
    </taglib>
    <taglib>
        <taglib-uri>/WEB-INF/fn.tld</taglib-uri>
        <taglib-location>/WEB-INF/fn.tld</taglib-location>
    </taglib>
    <taglib>
        <taglib-uri>/WEB-INF/fmt.tld</taglib-uri>
        <taglib-location>/WEB-INF/fmt.tld</taglib-location>
    </taglib>
</jsp-config>
    <resource-ref>
        <description>DB Connection</description>
        <res-ref-name>jdbc/SQLServerDB</res-ref-name>
        <res-type>javax.sql.DataSource</res-type>
        <res-auth>Container</res-auth>
    </resource-ref>
</web-app>This should help....

How to run labview program in debugging mode in windows 95 version

Respected all,
I am facing probelm while running probe.vi.
I received this command "connection to acquisition board was not found" when i run labview program.
I am using labview 5.1, fieldpoint FP 1000, NI-DAQ 6.5, Field point explorer version 1.6, Measurement and Automation Explorer 1.0.1.
I would kindly request you please help me how to run my program probe.vi in debugging mode in windows 95 version, so that i can locate where error occurs.
Thanking You
Yours faithfully
M.Vijay

Respected Norbert,
Thank you very much to for your help.
Norbert : Possible reasons are e.g. wrong IDs for measurement devices. If the error is connect to the FieldPoint, it is possible that it isn't configured correctly.
I am using Field point explorer 1.6, The Field point instrument FP 1000 and RS-232 port is using. It is confirmed that the field point instrument is working properly by LED light indication test.
Norbert: It sound like you are using DAQ devices (like PCI MIO 6952E) in the application. Are you sure that you select the correct device ID for this?
I am asking you to know, If i using Labview and Fieldpoint instrument FP 1000 to monitor my parameter interms of All, Channel 0, Channel 1, Channel 2, Channel 3, Channel 4, Channel 5, Channel 6, Channel 7 for my measurement.
But now i need to solve the command connection to acquisition board was not found, The expert say this command is due to there was no AT-AO-10 Analog Output board was present in CPU.
I do not find AT-AO-10 Analog Output board in my CPU, Previously the instrument was worked perfectly by other person who assembled everthing to measure temperature.
The only aswer know send by previous person is if my task does not imply the use of a DAQ you probably have to locate where the DAQ driver is called and exclude it from the program. try to run the program in debugging mode so that you can locate where the error occurs.
I do not know how to proceed his instruction. So i would kindly request you to please help me to solve my probelm.
I also removed AT-AO-10 software from device manager >> Data Acquisition system >> AT-AO-10 just now.
I also find GPIB version 1.30, when i remove in add or remove program, it say that Error removing the GPIB.
I am eagerly waiting for your help.
Thanking You
Yours faithfully
M.vijay

How to run the program in back ground with out selection screen ?

Hi,
I want to run the program in back ground but don't have selection screen. How to run this program in back ground
as program has no selection screen.
Waiting for quick response.
Best Regards,
Padhy
Moderator message: basic, please search for available information/documentation.
Edited by: Thomas Zloch on Feb 21, 2011 12:43 PM

Hi,
Go to transaction SE38 --> Execute --> Background.
If your program contains selection screen, you have to pass your input values as variants.

How to run java program from website?

Hello
I'd like to know how to run java program from my web page.
I'd like to push some button in this web page so java program that would be on my server
would pop-up. Can it be done automaticaly upon running this web site? (without any buttons - I just enter website and program pops up).
Cheers

I rather thought about RMI. But I could try servlets. So how it would look like?.
I would make http request in browser (enter address) and program would show up in its window?. And I would not have to change anything in my program?. This program would run then on both boxes?. One remotely and one not?.
But I would have to learn some basics, I've never worked with servlets. Could you suggest some good sites about it?. With ready examples so I could tweak them to my purpose.
Message was edited by:
macmacmac

How to run Java program as Daemon Server in linux

How to run Java program as Daemon Server in linux
i would like to run the java program on system start up in a redhat linux system
can any one provide rc.status file

http://wrapper.tanukisoftware.org/

How to run a program as an administrator from within a non-elevated command prompt?

I have a project that is going to be running on a kiosk, and the user that is running the kiosk software is going to be restricted. I have an alternate administrator account, but I cannot seem to figure out how to open my program running as this administrator
user. I have tried to use runas, like so:
runas /user:admin kiosk.exe
However, when I try to run this command, it asks me for the password of the administrator account and my program doesn't open correctly. It fails to open at all. If I change the run as to a start command, then the program executes fine so its
not a problem with my software.
Is there a way to pass a password parameter to runas so that it will not prompt for the password every time? If there is not, can someone think of another way for me to elevate my process to administrator without being logged in as one through the
command prompt?

Hi KevinGEAR,
You want to allow the others without the administrator`s level to run this software and meanwhile the administrator is not logged in, right?
Here is an alternative solution :
1.To work with this solution, a built-in administrator account should be enabled and meanwhile you can create a standard account. The built-in administrator account is different from the administrator account you created.
To enable built-in administrator account:
Ways to Enable / Disable the Built-In Windows 7 Admin Account
http://social.technet.microsoft.com/wiki/contents/articles/3040.enable-disable-the-local-hidden-built-in-administrator-account-in-windows-7.aspx
2. Use the following code
runas /user:ComputerName\Administrator /savecred "Full path to program's exe file"
Here is a link for reference:
Elevated Program Shortcut - Create for Standard User
http://www.sevenforums.com/tutorials/193743-elevated-program-shortcut-create-standard-user.html
NOTE: This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites.
Best Regards

How to run TagLibrary program

Hi frnds,
i am working on Jsp Tag Small example ..I wrote one JSP file,One .tld file and one .java files .That java file is compiled properly.While running that program i am getting error as below:
1..org.apache.jasper.JasperException: /Date.jsp(7,7) Unable to load tag handler class "tagexamples.PageVisitTag" for tag "test:pageVisit"
Here with i sent my File Structure and Source file also :
1.Date.jsp
<%@ page language="java" import ="java.util.Date" %>
<%@ page import="tagexamples.*" %>.
<html>
<title>Simple Date Tag</title>
     <body>
          <%@ taglib uri="/pageVisit.tld" prefix ="test" %>
          <h2> <test:pageVisit /></h2>
          <h2> Current System Date is <%= new Date().toString() %></h2>
     </body>
</html>
2.pageVisit.tld
<?xml version="1.0" encoding ="ISO-8859-1" ?>
<!DOCTYPE taglib PUBLIC "=//Sun.Microsystems,Inc.//DTD Jsp Tag Library 1.1//EN"
          "http://java.sun.com/j2ee/dtds/web-jsptaglibrary_1_1.dtd">
<taglib>
     <tlibversion>1.0</tlibversion>
     <jspversion>1.1</jspversion>
     <shortname>date</shortname>
     <info>
          A simple tag Library for example
     </info>
     <tag>
          <name>pageVisit</name>
          <tagclass>tagexamples.PageVisitTag</tagclass>
          <bodycontent>empty</bodycontent>
          <info>
               This tag Output the LastTime u have viisted the page in the Last MOnth..
               This tag Ocntains empty Body and no attributes
          </info>
     </tag>
</taglib>
3.PageVisitTag.java
package tagexamples;
import javax.servlet.http.*;
import javax.servlet.jsp.*;
import javax.servlet.jsp.tagext.*;
import java.util.Date;
import java.io.IOException;
public class PageVisitTag extends TagSupport
     public int doStartTag() throws JspTagException
          Cookie info = null;
          String msg = "This is the First time u have Visited this page" ;
          //Get all Cookine s that Came from the Request
          Cookie[] cookies = ((HttpServletRequest)pageContext.getRequest()).getCookies();
          for (int i=0;i< cookies.length;i++)
               info = cookies;
               if(info.getName().equals("MyCookie"))
                    found = true;
                    break;
          }//for
          String newValue =""+System.currentTimeMillis();
          if(!found)
               //Create a new Cookie and set its age
               info = new Cookie ("MyCookie",newValue);
               info.setMaxAge(60*1);
               info.setPath("/");
               ((HttpServletResponse)pageContext.getResponse()).addCookie(info);
          }else {
               long conv = new Long(info.getValue()).longValue();
               msg = "U Last visited this site on "+new Date(conv);
               //Set the new value of the Cookie and adddd it to the Response
               info.setValue(newValue);
               info.setMaxAge(10*24*60*60); //keep the cookie for One Month
               //Set the Path so that the Cookie is available everywhere on the Server
               info.setPath("/");
               ((HttpServletResponse)pageContext.getResponse()).addCookie(info);
          } //else
          try{
               JspWriter out = pageContext.getOut();
               out.write(msg);
               }catch(IOException e){
                    throw new JspTagException("JspWriter not There :"+e);
               return SKIP_BODY;
     }//doStartTag ends
     public int doEndTag() throws JspTagException {
          if(!found){
               //Don't Compare current and Cookie time this time
               return SKIP_PAGE;
          }else {
               return EVAL_PAGE;
     }//doEnd Tag ends
          boolean found = false;
     } //Class ends
while running the above files in Tomcat it giving above error:
i am running by:
http://localhost/TagExamples/Date.jsp
and
I kept files in the below Structre order.
My file Structure is :
D:\jakarta-tomcat-5.0.16\webapps\TagExamples\WEB-INF\classess\tagexamples\PageVisitTag.java
D:\jakarta-tomcat-5.0.16\webapps\TagExamples\Date.jsp
D:\jakarta-tomcat-5.0.16\webapps\TagExamples\pageVisit.tld
Just tell me is it Correct ..? and what is the Problem in COding and how to run a Tag Library
If anybody know the Solution just reply .send me the mail
[email protected]
with regards,
Ramesh P
98459 35822

Do (dir if on windows, ls if on *nix) and you will probably see an A directory in the A directory. That came from your last compilation attempt. Remove it and everything in it. Now,
cd ..
javac A/Convertible.java
java A.Convertible

How to run the Program given in JavaMail 1.4 Demos (folderlist.java)

Hi All,
in the distribution of JavaMail 1.4, some programs are given, i want to run folderlist.java. But i m unable to run it? Can somebody tell me how to run it?
i tried like this:
java folderlist -T IMAP -H email.abcdef.com -U user -P password
java folderlist -T POP -H email.abcdef.com -U user -P password
But it is not working giving some error like :
Exception in thread "main" javax.mail.NoSuchProviderException: No provider for POP
at javax.mail.Session.getProvider(Session.java:455)
at javax.mail.Session.getStore(Session.java:530)
at javax.mail.Session.getStore(Session.java:510)
at folderlist.main(folderlist.java:117)

Hi bshannon,
I had tried with the protocol names you given, but same is the result, can u tell me i m giving only protocol, host, user, password.
Is this sufficient to connect or i need to supply all the params like url , root, verbose, pattern, etc.
I m getting the access to server in other programs. Since our server doesn't support imap. so i tried like this
E:\downloads\javamail-1.4\demo>java folderlist -P pop3 -H email.abc.com -U username -P password
Exception in thread "main" javax.mail.NoSuchProviderException: Invalid protocol: null
        at javax.mail.Session.getProvider(Session.java:431)
        at javax.mail.Session.getStore(Session.java:530)
        at javax.mail.Session.getStore(Session.java:510)
        at javax.mail.Session.getStore(Session.java:496)
        at folderlist.main(folderlist.java:119)

How to run a program in background?

Hi abapers,
I want to run a program in background using sm36 and sm37.But i am not aware of input in that tansaction.So kindly tell me the steps ho run a program in background.
Regards
Ansuman

Hi Ansuman Parhi,
by useing T-codes
First go to transaction SM36 to schedule the job.
When you enter the "Start condition" for job, do as follow.
Select processing by "Date/Time".
Enter date as current date.
Let us say you are scheduling this job today then give date 08/30/2007.
Check "periodic job" checkbox.
Hit "periodic value" button and select to run "Daily"
Also have a look on below thread
Re: How to run program in background?
This is how to do it through code
data: lv_job_name like tbtco-jobname,
lv_job_nr like tbtco-jobcount,
lv_job_released type c,
lv_job_start_sofort type c,
lv_print_parameters type pri_params.
lv_job_name = 'Z_test'. " your background program name
call function 'JOB_OPEN'
exporting
jobname = lv_job_name
importing
jobcount = lv_job_nr
exceptions
cant_create_job = 1
invalid_job_data = 2
jobname_missing = 3
others = 4.
if syst-subrc = 0.
*submit job with all the selection screen params...
submit (lv_job_name)
with applfile = applfile
with p_lines = p_lines
with rfc_dest = rfcdest
with p_selmtd = lv_selmtd
with px_shsim = px_shsim
with px_sherr = px_sherr
user syst-uname
via job lv_job_name number lv_job_nr and return.
if sy-subrc = 0.
call function 'JOB_CLOSE'
exporting
jobcount = lv_job_nr
jobname = lv_job_name
strtimmed = 'X'
importing
job_was_released = lv_job_released
exceptions
cant_start_immediate = 1
invalid_startdate = 2
jobname_missing = 3
job_close_failed = 4
job_nosteps = 5
job_notex = 6
lock_failed = 7
others = 8.
if syst-subrc 0.
message i162(00) with
'An error occured while closing the background job.'.
stop.
endif.
endif.
endif.
skip 1.
write: / 'Background process', lv_job_name ,
'called successfully' no-gap.
write: / 'You can check the job in transaction SM37'.
Hope it will solve your problem..
Thanks & Regards
ilesh 24x7

How to run .html file from .java file..?

Hi All,
I was just trying as mentioned in the subject of how to run an html file from a java file.We have runtime class which inturn is having exec method which returns process but it supports only .exe as an argument .Is there any way to do this???
Thanks in advance.

viswa07 wrote:
You mean to say Desktop class in java...???I'm so sorry, I thought you knew enough Java to look up the API.
[This link|http://java.sun.com/docs/books/tutorial/getStarted/cupojava/index.html] might be more at your level.
db

How to run a program

Hi all
I have one commandline application written in Java, that depends on other files (.jar) to run. This is in Unix.
When I make "java application", the system complains about the missing libraries. If I do "java -cp lib application", where lib is a directory with several files, it fails saying NoClassFound.
How can I run my program?

Hi all
I have one commandline application written in Java,
that depends on other files (.jar) to run. This is in
Unix.
When I make "java application", the system complains
about the missing libraries. If I do "java -cp lib
application", where lib is a directory with several
files, it fails saying NoClassFound.
How can I run my program?Unless java -cp lib contains class files that won't work. I assume that lib contains jar files and not class files. If this is the case the you need to java -cp lib\jar1.jar:lib\jar2.jar:lib\jar3.jar application

How to run html programs in safari?

Similar Messages

Maybe you are looking for