How to run multiple Instances of wls5.1 under one instance

Hello forum,I want to make 3 instance of weblogic that runs under one instance,but
i don't know how.
for example I will like to have the following.
Weblogic is my main instance,so i will like to have more instances called web,db,batch
witch run on their own under.
Weblogic/web,db,batch,
I have made the 4 instance first weblogic has empty weblogic.properties file,
and the otheres 3 have their full weblogic.properties,my problem is how can I
refer eatch instance individually, that means the
subinstances like web,db,batch in my startweb.cmd,startdb.cmd,startbatch.cmd
I don't know how to start eatch instance alone.
HELP

To run more than 1 instance of Logic at the same time, you really need 2 copies as while the license allows you to install on 2 machines (1 laptop 1 desktop ideally), they can not run at the same time.
So, where now? Well there is a legitimate way around this, assuming you have a fast enough network between the 2 computers and that is to have 1 machine running as a Logic Node to share the work out. When I'm not 'Out and about' I could use the MacBook Pro as a node for my home setup (For example) running some of the soft synths for example.

Similar Messages

How to select multiple iphoto card design under one shipment?

Hi All,
I have designed 4 different invitation cards. I wonder if i can multiple select 4 of these design under one shipment, so i can save a lot of shipping cost. Please share your experiences. Thanks.
Regards,
Wymond

Sorry Wymond, you cannot combine different designs in one order. You can only order exact duplicates at once.
You may want to send feedback to Apple, that you need this option, the more feedback, the better:
http://www.apple.com/feedback/iphoto.html
Regards
Léonie

HT2905 I have multiple album titles of the same name with different artists. How can I get them to go under one album title again?

I have multiple album titles of the same name with different artists. How can I get them to go under one album title again?

In iTunes(on a Mac or PC) just tap on 'Albums' rather than 'Artists' and you'll see them all together.
You may find that there are songs mislabelled. In which case right tap on the Album or Artist and tap 'Get Info', then change to the correct name and the songs will join the rest of the songs for that Artist or Album.
Then resync with your iPhone and all will be well.

How to open multiple sql files in only one ssms instance

how to open multiple sql files in only one ssms instance, I can't get anything to work that I find online..I hope you can help us.

I tried opening two files but selecting and hitting enter. it opens one SSMS and two tabs.
Balmukund Lakhani
Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
This posting is provided "AS IS" with no warranties, and confers no rights.
My Blog |
Team Blog | @Twitter
| Facebook
Author: SQL Server 2012 AlwaysOn -
Paperback, Kindle

How to generate multiple output pdf's from one oracle reports

how to generate multiple output pdf's from one oracle reports.
I have a report where I have to generate more than one output files from the same report based on a parameter.
Each output file is for each parameter.
Is this possible in oracle reports, is so how ?

You can better post your question in the reports forum instead of this pl/sql forum.

How many Iphone 5 can you open under one account ??

Just a simple question , how many iphone 5 can you open under one account ? is it 5 or more ??? anyone know . I've been a verizon customer for a little bit over 5 months ..... any input ??? thank you

I'd call Customer Service and ask, because the Share Everything plan is supposed to allow 10 lines:
http://support.verizonwireless.com/clc/faqs/Calling%20Plans/share_everything.html

How to migrate the concurrent managers definations from one instance to another

How to migrate the concurrent managers definitions from one instance to another instance by using FNDLOAD in R12.1.3
Greatly appreciate any help on this.
Thanks!

Concurrent managers can't be migrated using FNDLOAD -- Tips and Examples Using FNDLOAD (Doc ID 735338.1)
What are you trying to achieve here? Why migrating CMs from one node to another?
Thanks,
Hussein

How to run multiple CodedUI Ordered Tests over multiple Test Agents for parallel execution using Test Controller

we are using VS 2013, I need to run multiple Coded UI Ordered Tests in parallel on different agents.
My requirement :
Example: I have 40 Coded UI Test scripts in single solution/project. i want to run in different OS environments(example 5 OS ). I have created 5 Ordered tests with the same 40 test cases.
I have one Controller machine and 5 test agent machines. Now I want my tests to be distributed in a way that every agent gets 1 Ordered test to execute.
Machine_C = Controller (Controls Machine_1,2,3,4,5)
Machine_1 = Test Agent 1 (Should execute Ordered Test 1 (ex: OS - WIN 7) )
Machine_2 = Test Agent 2 (Should execute Ordered Test 2 (ex:
OS - WIN 8) )
Machine_3 = Test Agent 3 (Should execute Ordered Test 3
(ex: OS - WIN 2008 server) )
Machine_4 = Test Agent 4 (Should execute Ordered Test 4 (ex:
OS - WIN 2012 server) )
Machine_5 = Test Agent 5 (Should execute Ordered Test 5 (ex:
OS - WIN 2003 server) )
I have changed the “MinimumTestsPerAgent” app setting value
as '1' in controller’s configuration file (QTController.exe.config).
When I run the Ordered tests from the test explorer all Test agent running with each Ordered test and showing the status as running. but with in the 5 Test Agents only 2 Agents executing the test cases remaining all 3 agents not executing the test cases but
status showing as 'running' still for long time (exp: More then 3 hr) after that all so its not responding.
I need to know how I can configure my controller or how I can tell it to execute these tests in parallel on different test agents. This will help me reducing the script execution time.
I am not sure what steps I am missing.
It will be of great help if someone can guide me how this can be achieved.
-- > One more thing Can I Run one Coded UI Ordered Test on One Specific Test Agent?
ex: Need to run ordered Test 1 in Win 7 OS (Test Agent 1) only.
Thanks in Advance.

Hi Divakar,
Thank you for posting in MSDN forum.
As far as I know, we cannot specify coded UI ordered test run on specific test agent. And it is mainly that test controller determine which coded UI ordered test assign to which test agent.
Generally, I know that if we want to run multiple CodedUI Ordered Tests over multiple Test Agents for parallel execution using Test Controller.
We will need to change the MinimumTestsPerAgent property to 1 in the test controller configuration file (QTControllerConfig.exe.config) as you said.
And then we will need to change the bucketSize number of tests/number of machines in the test settings.
For more information about how to set this bucketSize value, please refer the following blog.
http://blogs.msdn.com/b/aseemb/archive/2010/08/11/how-to-run-automated-tests-on-different-machines-in-parallel.aspx
You can refer this Jack's suggestion to run your coded UI ordered test in lab Environment or load test.
https://social.msdn.microsoft.com/Forums/vstudio/en-US/661e73da-5a08-4c9b-8e5a-fc08c5962783/run-different-codedui-tests-simultaneously-on-different-test-agents-from-a-single-test-controller?forum=vstest
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to run multiple scripts in sql*plus?

I would like to run 2 scripts in sql*plus, how do I do this? I tried the following, but it won't run.
create table student_new
AS
select *
from student
insert into student_new
(last_name, first_name
values
(Crop, Jenny)
The above are the two scripts I want to run, what am I doing wrong.
Thanks

Do you have a solution to run multiple scripts continuosly, one after the other as one script.
Say I have file1.sql file2.sql, file3.sql.
I want to create a script run.sql, where this will run file1.sql,file2.sql,file3.sql one after other without any one running one after the other like follows:
run.sql should have
begin
@file1.sql
@file2.sql
@file3.sql
dbms_output.put_line(select sysdate from dual);
end;
If I run run.sql all the three scripts should be executed successfully and then display the current time . All these files have update statements(50,000 updates each file).
Very urgetn. Can some one hlpe, please.
Thanks in advance.

How to run multiple java files concurrently using command line?

Hi,
I have to write a script to run multiple java files and c files concurrently. Say, A and C are java files and B is another binary executable file, I have to make sure they are run in the order A-B-C, then I was trying to run by using
java A & ./B & java C
But it turned out that B could run before A started... Is there any way that I can ensure that A runs before B, and B runs before C by using the command line?
Thanks a lot.

GKY wrote:
Sorry, I didn't make my question clear enough...
A has to give some output files that B needs to get started,Then B can start at any time--even before A--and just wait for those files to be written. For instance, A could write to a temp file, then rename it to the real name. However, if there are multiple files, and they all have to exist, even this won't necessarily work. There are other approaches that will though.
although writing the output takes very short time,Depends on when the OS decides to give A CPU time, what else is going on on that disk controller and/or network, etc.
B could still run before A finishes the writing, As it can if you sleep for 1, or 10, or 1,000,000 seconds before starting B.
if B can't find the info it wants, it fails to move on. That's why I need to make sure A starts before B.No, you need to make sure A's data is there before B tries to use that data.
Edited by: jverd on Jul 29, 2008 1:06 PM

How to run multiple reports From One Form with 1 report object?

Hi ALL!
i want to run multiple reports (in 10g technology) from 1 Form having only 1 report object.
i.e
IF parameter=yes THEN
Rpt_new should run
Else
Rpt_old should run
END IF;
How can i do this?
thanks
rana

Rana,
I found this in the Forms online Help. You could easily found it yourself. Don't be afraid of pressing CTRL-H:
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_FILENAME, 'yourreportsfilename.rdf')Regards,
Martin Malmstrom

How to run multiple sqls in one jasper report

Hello!
Is there any one that can help me in integrating/ viewing my xml file to the web. I have my GUI in jsp format, the jsp makes a call to the bean class and then finally bean class hit my reports java class.The report java class generates the report and shows it in the new window.
The problem is with writing mutiple sql queries and showing the result from multiple sql queires in one report.
I do not know how to write multiple queries for just 1 report. I can give a simple example of my problem also.
My report is as follows:
First Name Middle Name Last name
Sandeep Pathak
Now First and Middle Name come from 1st sql query and Last Name comes from 2nd sql query.
I want to join the result obtained from both the sql queries in one Jasper Report (not as 2 separate sections but as one section).
My problem is how to view my report in the web. furthermore, how to make complex query in jasperassistant, like multiple table in one query, because i�m integrating multiple query in one form or sheets of paper.
Please help me in this.
Thanks
Sandeep
Calance
India

Hi Sheldon,
we never have issues when we combine standard objects, like a cliear with a load inforprovider, or the master data integration you mentioned in your document. However, from the moment we combine a script logic with a standard package (like a move) it does not work .The data package contains the task needed for the script and for the move. the process chain is called up but always comes in error in the first step (BPC modify dynamically ) ... there is also no log when checking the view status ...
I can sent you some screenshots if you like ...
D

Can you suggest me how to run multiple calc scripts using singel maxl script

Hello,
I am writing a maxl script which should be able to :
1. update Set Variables for the Essbase DB
2. Execute multiple calc scripts
2a. Trying to put specific sleep time within multiple calc scripts.
Thanks and Regards.

Why are you looking for a Maxl to run multiple maxls? Can't you use a batch or sh script to do it.
Unix has a sleep command in batch file try using choice
Regards
Celvin

How to Run Multiple BAPI's

Hi All,
i was trying to run multiple BAPI's using Jco. but no luck. it giving error message like "Employee/person not locked yet".
the BAPI's i'm trying are
1. BAPI_EMPLOYEET_ENQUEUE
2. BAPI_ABSENCE_REQUEST
3. BAPI_TRANSACTION_COMMIT
4. BAPI_EMPLOYEET_DEQUEUE
i'm using connection pooling to get connection.
the code
JCoDestination destination = JCoDestinationManager.getDestination(ABAP_AS_POOLED);
JCoFunction function = destination.getRepository().getFunction("BAPI_EMPLOYEET_ENQUEUE");
function.getImportParameterList().setValue("NUMBER", "00000002");
function.execute(destination);
function = destination.getRepository().getFunction("BAPI_ABSENCE_REQUEST");
function.getImportParameterList().setValue("EMPLOYEENUMBER", "00000002");
function.getImportParameterList().setValue("VALIDITYBEGIN", c.getTime());
function.getImportParameterList().setValue("VALIDITYEND", c1.getTime());
function.getImportParameterList().setValue("ABSENCETYPE", "0014");
function = destination.getRepository().getFunction("BAPI_TRANSACTION_COMMIT");
function.execute(destination);
function = destination.getRepository().getFunction("BAPI_EMPLOYEET_DEQUEUE");
function.getImportParameterList().setValue("NUMBER", "00000002");
function.execute(destination);
i don't know where i'm going wrong. Plx help me out.
thanks in Advance.
Ravi.

Hi.
I found the correct form to use.
BAPI_EMPLOYEE_ENQUEUE
BAPI_PERSDATA_CHANGE
BAPI_EMPLOYEE_DEQUEUE
In a java file need use JCoContext to generate a group functions to will be execute
try {
JCoContext.begin(destination);
     if (JCoContext.isStateful(destination))
          bloqFunction.execute(destination);
          cambFunction.execute(destination);
          desbFunction.execute(destination);
} finally {
JCoContext.end(destination);
Declarated:
JCoFunction bloqFunction = destination.getRepository().getFunction(
                    "BAPI_EMPLOYEE_ENQUEUE");
JCoFunction cambFunction = destination.getRepository().getFunction(
                                        "BAPI_PERSDATA_CHANGE");
JCoFunction desbFunction = destination.getRepository().getFunction(
                                        "BAPI_EMPLOYEE_DEQUEUE");
I hope help with this.

How to run multiple Test Script versions at once

HI
How to Run different versions of Test Scripts ( TCD record & SAP GUI) continiously.
Thankyou

>
d s wrote:
> HI
> How to Run different versions of Test Scripts ( TCD record & SAP GUI) continiously.
>
> Thankyou
Hi DS,
If I understand your question correctly,you want to execute different version of TCD and SAPGUI continously,then please find the steps below:
1)Create a new script.
2)Call the individual scripts created in TCD and SAPGUI in the new script using REF command in the pattern you want to execute.
3)eCATT will automatically choose the relevant version automatically suitable for the system.
4)Maintain the input and output paramters in the main script.
5)Paramterize the input and output values.
6)Once the script is without errors,you can execute the scripts and they run continously.
Hope this answers your query.
Regards,
SSN.

How to run multiple Instances of wls5.1 under one instance

Similar Messages

Maybe you are looking for