How to: run or stop ( privet browsing)

some sites request to have the '''''privet Browsing''''' on
mine is set to ( stop Privet Browsing)
how I can turn it on?

See - http://support.mozilla.com/en-US/kb/Private+Browsing

Similar Messages

How to run applet in a browser

I know already how to jar files but my only problem is how to attached my applet in an html.. how to run this in a browser.. please help..

http://java.sun.com/docs/books/tutorial/deployment/applet/deployindex.html

How to run applet program in browser

I am new in the field. I have begun with some basic programming. I wish to know how do you run a java programme in browser. I have added the html tag in the .java file. can anyone kindly let me know. thanks

You don't add the tag to the .java file. You need a separate HTML document (such as a .html file, or a .jsp, etc.) that has the <applet> tag in it. (Also there's some stuff you can do with <object> and/or <embed>, apparently.) The applet tag tells the browser to load your applet.
http://java.sun.com/docs/books/tutorial/deployment/applet/index.html

How to run and stop LabView code without using start and stop buttons

Hey
I've attached my code that I'm going to use with thermocouples. What I'm trying to do is: when I hit start button the code should run for a minute then stop for 5 minutes and then start again, this process should be repeated twice . Could you please suggest the appropriate way to do it.
Regards
Rajab
Solved!
Go to Solution.
Attachments:
temp. samples.png ‏24 KB

Rajab84 wrote:
Hi altenbach
Thanks a lot for your help, I've tried the state machine, I’ve created 5 case structures as following: start for 1 min, stop 5 min, start again for 1 min, stop 5 min, restart again 1 min and finally stop. I’ve tried the code and it didn’t work. Could you please have a look at the attached code and let me if I need to change something. I think I’ve not used the elapsed time function properly.
Best Regards
Rajab
you really dont need to repeat cases (2x)...using a shift register will reset your timer function once the timer has reached it's set limit. the "bool crossing" is used to tell me when the "5 min" case is done and increments the cycle count....ofcoarse, change the "seconds" constant to your desired time on the elapsed timer of this example
and you could "or" the stop to the "compare = 2" or change the select "wait" to "exit" with a constant connected to the stop
Attachments:
Untitled 2.vi ‏42 KB

How to run applet inside a browser coz my applet runs outside the browser

I would like to run the Java Applet viewer in-line inside a Browser Window. Presently, when launched through an html page, the applet opens another main window outside the browser. Can't seem to find any applet parameter tags for it. If there is a way to do that please let me know. Thanks in advance - m.a.

public class mainGIS extends JApplet {
public void init() {
GISEditor tempGISEditor = new GISEditor();
public mainGIS(){
     GISEditor tempGISEditor = new GISEditor();
     tempGISEditor.setTitle("Franchise Viewer");
     tempGISEditor.setSize(1000,600);
and..
<Html>
<Head>
<Title></Title>
</Head>
<Body>
<APPLET CODE="mainGIS.class" archive="aaa.jar" WIDTH="800" HEIGHT="600">
</APPLET>
</Body>
</Html>
it opens outside a web browser!(it pops out) I mean, I want to display my application in-line with the browser

How to RUN project not in browser

hello;
I'm new to flash builder ( plugin for eclipse ) and flex;
when I run my project ( flex project ... hello world ) it runs as a 'web application' and thus exits eclipse and sends me to a new tab in my mozilla.
of course in flash, a flash player just opens right in the authoring environment ... easy.
is there a way to get flash builder ( ie eclipse ) to run the app in a flash player right in the IDE.
typically during development I test run my apps 100's of times ...
thanks,
Shannon

ANSWER: http://help.adobe.com/en_US/Flex/4.0/UsingFlashBuilder/WS65aa2914f20a58eb-5d87e491121199f4 bbe-8000.html#WS6f97d7caa66ef6eb1e63e3d11b6c4d0d21-7f0a

How to run Discoverer on web browser

Hello all,
I have 10g database and Discovere Administrtor install on my system that have business area too. i want to access my report through browser.I want to access discovere through my web browser. Please tell me what other components I need to install ?
Best regards

Hi
You need to install an Oracle Application Server in order to use Discoverer via a web browser. The software you need is on OTN at this link: http://www.oracle.com/technology/software/htdocs/devlic.html?url=/technology/software/products/ias/htdocs/101202.html
You need to make sure you understand the License terms then click the acceptance buttons.
On the next screen scroll down until you find the row entitled Business Intelligence. This is the software for the stand-alone install of Discoverer Plus and Viewer.
Look across the row until you find the software that matches the platform you will be installing on then download the corresponding zipped files. Depending upon your platform, you will find that there are either 2 or 3 of these, and they all begin with the characters CD. For example, the Windows install has CD1 and CD2 whereas the HP install has CD1, CD2 and CD3.
You should download these files then unzip them into the same location. This will create folders called Disk1, Disk2 and so in. The installer itself can be found in Disk1. There is also a comprehensive documentation that descibes the install which you should read.
After you have installed 10.1.2.0.2 you should upgrade to 10.1.2.2 by getting hold of patch number 4960201 from Oracle MetaLink. You will need to have purchased an Oracle support license to get this upgrade.
After that you are recommended to apply the latest cumulative patch which as of today is CP7.
For more infomation on these patches please take a look at this posting on my blog: http://learndiscoverer.blogspot.com/2008/04/most-useful-patch-numbers.html
Best wishes
Michael

How to run the bw workspace in browser

Hi Folks,
Good Day!.
I have created bw workspace in bw system powered by hana and may iknow the option how to run the workspace in browser.
Please guide.
Thanks,
Hari

You will need to install a JRE to take over the VM of your browser. JRE stands for Java Runtime Eviroment.
Do this, and you will be able to view applets using Swing in your browser. JRE can be found on the download page. About security concerns, I've got a Swing Applet to work with access to client clipboard so this is also possible. For some people however this does not seem to work. I dont know why but perhaps it could work for you. Check out the thread http://forum.java.sun.com/thread.jsp?forum=63&thread=197092

How to stop the Browser from caching my web pages

Hi There
Can anyone tell how to stop the browser from caching my jsp pages
I am using
<%response.setHeader("Cache-Control","no-cache");
response.setHeader("Pragma","no-cache");
response.setDateHeader ("Expires", 0);
%>
but this does not work anduser is able to go back to the previous page
which i dont want and i want the browser to display the message the page has expired
Help appreciated
Thanks
Mumtaz

response.setHeader("Cache-Control", "no-cache");
response.setHeader("Pragma", "no-cache");
response.setDateHeader("max-age", 0);
response.setDateHeader("Expires", 0);
I have cut paste the code from my jsp which is working. There is one additional line. I do not know if that is the cause but there is no harm in trying that out.
Srinivasan Ranganathan

HT4515 How to make sure that after browsing that the webpage is not running in the background, but totally closed down

How to make sure that after browsing that the webpage is not running in the background, but totally closed down

Double tap the Home button, tap & hold the Safari icon until it starts to wiggle, tap the red minus sign to remove it from the Multi-Tasking bar. Tap the Home button when finished.

How to run python files on the browser?

Good day,
I am trying to run any python file on the Leopard web server, accesing it via safari.
also I have set the permissions of the file to 777...
then I have copied the file to library/webserver/documents.When I open this file in Safari, the file is listed, but it is not executed.
also I have copied the file to library/webserver/cgi-executables, but the file is not executed, an error appears:
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error.
More information about this error may be available in the server error log
the python file contains only 2 lines:
#!/usr/bin/env python
print 2
I have tested the file in the command line in the terminal python test.py and it runs fine... but I dont know what should I have to do to run it on the browser...
I am using python 2.5.2 and leopard 10.5.2
do I have to enable any mime types for python on leopard client? how to do it?
have a nice day

Goto the Install directory on your Oracle installed directory and have a look at the 'readme' file. You will find all the info you wanted.
Regards.

Every time I sign into my Macbook, I get an error message from Automator; "The data couldn't be read because it has been corrupted.". I have never created an Automator workflow. How do I find out what Automator is trying to run and stop it?

Every time I sign into my Macbook, I get an error message from Automator; "The data couldn't be read because it has been corrupted.". I have never created an Automator workflow. How do I find out what Automator is trying to run and stop it?

Maybe it's set as a login item:
- System Preferences: Users and Groups:
- Highlight your user account in the left pane/list
- Click "Login" tab at the top.
See if you have an Automater action on the list
- Note, you can select it, then right-click, and can then select "Reveal in Finder". That way you might have an idea what installed it.

How to Run Swing in Browser

Hi frnds
I gotta a Problem in swing.I want to run my swing in Browser.I have tried it with JApplet.But i can execute it only in Console.using appletviewer <filename>.html
how to run it in browser.
Please Help Me..

Quite easy, well for you. You have to have the newest java plug in working in your browser, but as a flaw, if a user wants to access it they need to download it too, but there is a way in the new JDK i believe to have the JRE on Suns server to run the applet, so the user w/o the Swing librarys can use the applet w/o problems

How to run ejb (JServer) client in web browser

Did anyone try the ClubMed example under $ORACLE_HOME/javavm/demo/examples/ejb/applets/ClubMed?
Does anyone know how to run the applets in latest Netscape and/or IE browsers? What do I need to do to set up security, etc. Thanks.
null

Forms client side is a Java applet, so it needs a Web browser to run. Anyway you could try to run it with the Java Web Start.
<p>See this Jan Carlin entry.</p>
Francois

How to run a form built in 10g by a browser remotely?

Hi All,
I've built a form by developer 10g at the server, I want to run it by a browser remotely. How?
I did it before but I've forgot it!
I think using URL like this:
http://<server_host_name>/forms/form_name.fmx

Hi,
try the following:
http://<server_host_name>/forms/frmservlet?form=form_name.fmx
if the form_name.fmx is at the dir the Forms looks for the generated files by default...
Otherwise you can write:
http://<server_host_name>/forms/frmservlet?form=c:\form_name.fmx
Or create a named configuration in the file formsweb.cfg...
greetings,
Sim
Edited by: sgalaxy on Mar 30, 2010 5:52 PM

How to: run or stop ( privet browsing)

Similar Messages

Maybe you are looking for