How to run several reports in one command
I Have written a Crystal report using the crosstab and it is filtered in the SQL statement for customer.
I need to run this for all the customers not just the one filtered. They want it just one customer to a page.
So I would have to make 23 different CR's one for each customer plus add one when a new customer is in the mix.
What would be some approaches to a fully automated job here?
Sounds like they want all the customers in one report, just 1 cust per page.
So why not group the report by customer, specify New Page After in GF1, and place the CrossTab in GH1 or GF1?
Similar Messages
-
How to run multiple reports From One Form with 1 report object?
Hi ALL!
i want to run multiple reports (in 10g technology) from 1 Form having only 1 report object.
i.e
IF parameter=yes THEN
Rpt_new should run
Else
Rpt_old should run
END IF;
How can i do this?
thanks
ranaRana,
I found this in the Forms online Help. You could easily found it yourself. Don't be afraid of pressing CTRL-H:
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_FILENAME, 'yourreportsfilename.rdf')Regards,
Martin Malmstrom -
How To Compile Several Reports 10g At Once
Hi all,
I want to know how to compile several reports (rdf) 10g at once, not one by one.
Thanks in adwance
VismantasHi Inolau
I am asking its working fine but where these rep files are generating i have put the batch file in my folder E:\Reports and from command prompt i am running this batch files its k but when i go to E:\Reprots folder there is not even a single rep file for these two reports.However if these rep generating some other directory but its not cause i have searched too for allz directory for exploc.REP and cldpln.REP.
E:\Reports>my.bat
E:\Reports>for %f IN (*.rdf) do RWCON60 userid=ics/ics@ics batch=yes source=%f s type=rdffile dtype=repfile overwrite=yes logfile=log.txt echo FINISHED COMPILING
E:\Reports>RWCON60 userid=ics/ics@ics batch=yes source=exploc.RDF stype=rdffile dtype=repfile overwrite=yes logfile=log.txt echo FINISHED COMPILING
E:\Reports>RWCON60 userid=ics/ics@ics batch=yes source=cldpln.RDF stype=rdffile dtype=repfile overwrite=yes logfile=log.txt echo FINISHED COMPILING
Thanks for yours prompt response. -
How to run a report in back ground
how to run a report in background with out using job open, submit , close is there any other function module to run report in background.
Hi,
There are two ways for you to handle,
one manually setting up the job through SM36 which is better and convinient,
secondly through program using FM's JOB_OPEN, SUBMIT, JOB_CLOSE.
Find below steps in doing both:
Procedure 1:
1. Goto Trans -> SM36
2. Define a job with the program and variant if any
3. Click on start condition in application tool bar
4. In the pop-up window, click on Date/Time
5. Below you can see a check box "Periodic Job"
6. Next click on Period Values
7. Select "Other Period"
8. Now give '15' for Minutes
9. Save the job
Procedure 2 via Program:
Below is a sample code for the same. Note the ZTEMP2 is the program i am scheduling with 15mins frequency.
DATA: P_JOBCNT LIKE TBTCJOB-JOBCOUNT,
L_RELEASE(1) TYPE c.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
JOBNAME = 'ZTEMP2'
IMPORTING
JOBCOUNT = P_JOBCNT
EXCEPTIONS
CANT_CREATE_JOB = 1
INVALID_JOB_DATA = 2
JOBNAME_MISSING = 3
OTHERS = 4.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
SUBMIT ZTEMP2 VIA JOB 'ZTEMP2' NUMBER P_JOBCNT
TO SAP-SPOOL WITHOUT SPOOL DYNPRO
WITH DESTINATION = 'HPMISPRT'
WITH IMMEDIATELY = SPACE
WITH KEEP_IN_SPOOL = 'X' AND RETURN.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
JOBCOUNT = P_JOBCNT
JOBNAME = 'ZTEMP2'
STRTIMMED = 'X'
PRDMINS = 15
IMPORTING
JOB_WAS_RELEASED = L_RELEASE
EXCEPTIONS
CANT_START_IMMEDIATE = 1
INVALID_STARTDATE = 2
JOBNAME_MISSING = 3
JOB_CLOSE_FAILED = 4
JOB_NOSTEPS = 5
JOB_NOTEX = 6
LOCK_FAILED = 7
INVALID_TARGET = 8
OTHERS = 9.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Hope the above helps you.
<b>Reward points</b>
REGARDS -
hi sap gurus
can anybody tell me about how to run a report in sap (ABAP). what is the TCode for that one.while i am trying to post asset master it is asking to start a report first and then post. kindly reply me soon
thanx in advanceHi,
- normal ABAP reports are executed by a TCode or SE38
- reports relating to assets are located at SPRO-Info Systems-Accounting-Fixed Assets
Rgds. -
How can run the report SAP_INFOCUBE_DESIGN?
hI gURUS
To know about the DIM Table size
How can run the report SAP_INFOCUBE_DESIGN?
Thanks
Cheers
DuraiFunction (se37):
RSDEW_INFOCUBE_DESIGNS
Try to see/run this function in order
to get statistic about one InfoCube
How to determine the size of DIM?
From this Function u can determine
how many rows in DIM u have.
After this u can determine size of DIM table:
ROWS * (How many Bytes are in one row) = Size of table.
In order to determine how many Bytes are in one row,
u can see transaction se11 -> Database table -> Tabkle name of DIM -> Display -> Fields -> just add the length*Bytes for all fields in this table.
BR -
How to run a report from oracle 10g form in .csv format
dear all,
how to run a report from oracle 10g form in .csv format? i've already run in pdf & excel format.
i'm using
SET_REPORT_OBJECT_PROPERTY (ro_report_id, report_desformat, 'PDF'); --for pdf
SET_REPORT_OBJECT_PROPERTY (ro_report_id, report_desformat, 'SPREADSHEET'); ---for excel
Please Help..i have already tried.
but the report show in htm or html format. that file will not save into csv. please help. -
How to move a report from one account to another account
Dear all ,
How to move a reports from one account to another account.
These are reports sent automatically. Unfortunately, I do not know where to find them and how to export to another account.
PuruHi,
You can use the Transaction SCC1 to move the data from One Client to Another Client for a Client dependent table.
The data should be present in a Transport and you can import to Transport to any client using SCC1.
Contact the Basis team to know how to use SCC1.
Regards,
Aj -
How to run a report in form 10g
How to run a report in form 10g;
RUN_REPORT_OBJECT - check the on line help and there is a great paper on otn.oracle.com/products/forms and click on 9i papers (it will be relevant for 10g as well)>
Regards
Grant Ronald
Forms Product Management -
How to run the report and show the output in excel file
salam
how to run the report and show the output in excel file,
how to run the report and print the o/p via printer
how to run the report and send the o/p via mail
thank u allHi,
There are Parameters DESTTYPE, DESFORMAT and DESNAME. You can set these parameters to get as you want.
1) Output in Excel File
ADD_PARAMETER(PL_ID, 'DESTYPE', TEXT_PARAMETER, 'FILE');
ADD_PARAMETER(PL_ID, 'DESFORMAT', TEXT_PARAMETER, 'DELIMITED');
ADD_PARAMETER(PL_ID, 'DESNAME', TEXT_PARAMETER, '<file_name>.XLS');2) output to printer
ADD_PARAMETER(PL_ID, 'DESTYPE', TEXT_PARAMETER, 'PRINTER');
ADD_PARAMETER(PL_ID, 'DESNAME', TEXT_PARAMETER, '<printer_name>');3) Email - Have to configure SMTP and all. ( i didn't checked it)
ADD_PARAMETER(PL_ID, 'DESTYPE', TEXT_PARAMETER, 'MAIL');
ADD_PARAMETER(PL_ID, 'DESNAME', TEXT_PARAMETER, '<email_id>');Regards,
Manu.
If this answer is helpful or correct, please mark it. Thanks. -
How to Run a Report automatically in Background for every night
Hi,
How to run a report program in Background automatically for every nigh.
Thanks
RameshHi Ramesh,
You can use SM36 and use the "Job Wizard" to define a background job in simple step by step procedure
Or
Goto SM37 and specify a job name.
Next specify the ABAP Program Name of the report you want to execute under Job Step.
Then click on "Extended Job Selection" and goto the Period Tab.
There select "Only Periodic Jobs" and then specify the frequency of execution based on Months, Weeks, Days, Hours or Minutes.
Hope this helps,
Regards,
Madhur
Message was edited by: Madhur Chopra -
How to Run the NEW "System Info Command" in Tiger ?????
I am new to Applescript and was wondering if someone could help me on how to run the new "System Info Command"?
Thanks!!!The "system info" command that red_menace uses above is the new system info command that's mentioned on the web page you referenced. However, red's example only displays the "long user name" and the "AppleScript version" in the dialog.
The entire system info record actually contains all of these items, each of which you can access just like red_menace shows you in his example:
AppleScript version
AppleScript Studio version
system version
short user name
long user name
user ID
user locale
home directory
boot volume
computer name
host name
IPv4 address
primary Ethernet address
CPU type
CPU speed
physical memory
Steve
PS - if you switch Script Editor over so the bottom pane displays the "Event Log" you'll see the entire system info record displayed in the log when you run red_menace's script. -
How to make several pushbuttons in one line (on screen)??
How to make several pushbuttons in one line (on screen)??
thanks in advance!!!!Hi,
USE
SELECTION-SCREEN BEGIN OF BLOCK.
SELECTION-SCREEN BEGIN OF LINE.
define all buttons between this block.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK.
selection-screen
Cheers
VJ -
How to run the report RM07CUFA?
How to run the report RM07CUFA?
Go to SE38 and enter RM07CUFA and click execute.
in the next screen enter details for
Movement Type
Special Stock Indicator
Company Code
G/L Account
and execute.
If you have any inconsistency with fields that will be shown with red colour.. -
How to run OBIEE Reports in Multi-Org Environment?
How to run OBIEE Reports in Multi-Org Environment of EBS.
hi Rainer,
My Forms and Reports Server is in Same System only. Actually i am giving this path
http://vagee.ail/reports/rwservlet?
server=rep_vagee_oracle10g_apps_server&report=D:\FP2
\dealer_reports\oc_dealer.rep&userid=fp2/fp2erp@info
&destype=cache&desformat=pdf&ODSNO=OC0809/00110&branch=DLR002
In My AS System Running Successfully. But Client systems Page cannot be display message is displaying.
but generally i m able to access the reports server using this path
http://vagee.ail/reports/rwservlet?
then Reports server page is displaying but
when i specify that report server name
http://vagee.ail/reports/rwservlet?server=rep_vagee_oracle10g_apps_server
page cannot be displayed.
what will be the problem. please help me. thank you.
Regards,
Kalyan.
Maybe you are looking for
-
RPTARQEMAIL not working in ESS
Hi, In ESS RPTARQEMAIL is not working for leave request. The entries is shown when i send leave request but when i run it the email doesnt get sent. Regards Priya
-
Midori external downloader is not working
I'm trying to get Midori to download files via Axel. The External Download Manager extension is enabled, and the command line is: urxvt -e axel -a -H Referer:{REFERER} -H Cookie:{COOKIES} {URL} ..but Save As just saves the file normally - without pre
-
How can I download itv player to my iPad Air
I Have iPad Air 32gb of ios7 . In the App Store I am finding no itv player application. Itv.com though giving a link to download the itv player for iOS devices. When I am clicking the above said link to download the player a blank page is appearing i
-
Hi. I was wondering if it is possible to have xml data within an xml. I used JAXB to generate the codes that I needed and have created a test application and test xml file. However, I get an error when I place the xml data between the xml tag. I want
-
Hi! Mein iPad2 geht nicht mehr richtig. Die Apps starten nicht mehr, lediglich der Bildschirm zuckt kurz schwarz. Aber ein "Numbers" oder "Pages" verweigert ebenso den Dienst, wie fast alle anderen Apps. Habt Ihr einen Tipp, welcher dieses Problem lö