How to run wfstatus.sql for i-Expenses
how to run wfstatus.sql for i-Expenses in 11i EBS.
Pl see MOS Doc 295078.1 (Maintenance Pack, Patchset, and Rollup Patch Level for Internet Expenses 11i)
HTH
Srini
Similar Messages
-
Error while running awrrpt.sql for Automatic Workload Repository Report
Hi
I am trying to run awrrpt.sql.While running the query in sql*plus it ask me for file format then no of days
& then begin & end snapshot Id & then eventually the sql*plus session get closed . I am unable find
why sql*plus session getting closed automatically.Please tell me How to run awrrpt.sql to generate AWR reports. Please guide.1008032 wrote:
Dear
This is happen due to you are given the begin snap id and end snap id not between the shut down time .EX begin snap it at 12 am 1521 and you shut down at 12:30 am and you you give the 1:00 am snap id 1522 .That time system can not collect the statistics betwwn 1521 and 1522.
Or you should enable statistics_level parameter if it 11gr2 you should enable controlfile_management_pack _access='DIAGNOSTIC+TUNING'
issue not resolved please post your error..........
Thanks®ards
SS.vijaibabuI checked my statistics_level it shows value TYPICAL which I think is right.
SQL> sho parameter statistics_level
NAME TYPE VALUE
statistics_level string TYPICALAlso I given snap id which between single startup & shutdown still the problem is same sqlplus session get closed after asking for snal ids.
If error gets generated where it gets generated? -
How to run the SQL Script in SQL Prompt?
Hi ExpertGroup,
I have written one SQL Script name called "MySQLSCript.SQL". I want to know how to run the SQL Script in SQL Prompt?.
Generally, I run SQL Script in PL/SQL Developer tool. But In this case, some SET command is not working/supporting in PL/SQL Developer Tool.
Let me know, How to Run in SQl Prompt.
Thanks & Regards,
Senthil K Kumar.This is my SQL Script....
SET COLSEP '|'
SET LINESIZE 32767
SET PAGESIZE 50000
/* SET LINESIZE 3000
SET PAGESIZE 50000
SET DEFINE OFF */
SET ECHO OFF
SET FEEDBACK OFF
--SET HEADING OFF
SET TRIMSPOOL ON
SET NEWPAGE NONE
SET UNDERLINE OFF
SPOOL &&EnterPath;
SELECT * FROM &&TableName;
SPOOL OFF
SET FEEDBACK ON
--SET DEFINE ON
PROMPT Done.
I am able to run this script in SQL Prompt....
Its executing fine...
But, If I am executing again it maynot asking for new set of data....
alternativily its taking old values only.....
how can i exeute with new set of data in the sql prompt..... -
How To run Currency translation for Consolidation Application in BPC NW
In "How To do Currency Translation for Financial Application in BPC 7 NW", the author mention that there is another "How To run Currency translation for Consolidation Application in BPC NW", anybody know where to get it?
Hi...
Check if the below links are useful to you.....
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/6052a57b-8c64-2c10-b3a5-b0378ff21243&overridelayout=true
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0ea1fd8-d6d3-2a10-c1ab-e8164dd98316
You can find all How-to docs in the below link
http://wiki.sdn.sap.com/wiki/display/BPX/EnterprisePerformanceManagement%28EPM%29How-to+Guides -
How to run a SQL manually with the same SQL_ID
I want to know how to run a SQL which comes from application side manually so that same SQL_ID is generated. I am aware that even if there is a small change in the sql(even a space) the sql_id gets changed. CURSOR_SHARING_PARAMETER is similar in my DB.
Thanks
RudreshI think you really want is the execution plan (plan_hash_value), what about outlines ?
HTH
Antonio NAVARRO -
How to run PL/SQL commands in this SQL browser
How to run PL/SQL commands in this SQL browser
This discussion should help Re: my pl/sql codes does not run in express edition what can i do????
-
How to run Crypto Tools for SSO Enabling
Hi Friends,
How to run Crypto tools for SSO enabling. If any body knows please help me...
ThanksHi ;
what is the script for windows Environment... -
How to run a sql script in oracle forms
Hi,
For me there is an sql script. I need to run that sql script in forms.
Actually we will run that sql file in pl/sql developer by giving @and the file name.
But how to run that file in forms.
Can any one help on these.Which book I have to look.
ThanksActually there is a script files which will drop all the indexes and tables.
DROP querry will be there for each index and each table.
So I run the script all the indexes and all the tables will be deleted. So using forms I have to run that script.
Thanks -
How to Run a .sql file from simple java class
How to execute a .sql file consisting of Complex Queries,procedures through simple java class.
The queries may have different delimiters,queries independant of each other.
I am able to do with Specific De-limiter.But I need in such a way that there should not be any
Constraints. Since My .sql may Contain different De-limiters.
If any one can Suggest Some Solution.
It will be Great Help.
regards
AnilCheck out ibatis script runner, it' a third party library but quite handy for running sql files...
m -
How to write complex sql for this
Hi ALL,
I have a requirement like this
I have 5 tables which i have to join to get the result
but there no join column to 2 other table.
I want to get all the applications using cobal,running on UNIX.
How to write the query for this
1.APP
APP_i DESC
1 Accounts
2 Payments
3 order transfer
4 Order processing
2.Techgy
techid techdesc
1 cobal
2 Java
3.APP_Techgy
APP_I Techid
1 1
2 1
3 1
4 2
4.Pltfrm
pltfmid pltfrmdesc
1 Windows NT
2 UNIX
5.APP_Pltfrm
APP_I pltfrmid
1 1
2 1
3 2
4 2
ouput must be
APP_i Desc techDESC pltfrmdesc
3 ordertranfer Cobal UNIX
Thanks in advanceThis ('descr' in place of 'desc')?
SQL> select a.app_i, a.descr, t.techdesc, p.pltfrmdesc
from app_techgy atc,
app a,
techgy t,
app_pltfrm ap,
pltfrm p
where atc.techid = t.techid
and atc.app_i = a.app_i
and atc.app_i = ap.app_i
and ap.pltfrmid = p.pltfmid
order by a.app_i
APP_I DESCR TECHDESC PLTFRMDESC
1 accounts cobal windows nt
2 payments cobal windows nt
3 order transfer cobal unix
4 order processing java unix
4 rows selected. -
How to run a SQL Server Stored Procedure
I need to run a SQL Server Stored Procedure in answer, the stored procedure use a hash table (temporary table) and I nedd to pass a parameter to stored procedure
anyone know if is it possible in OBIEE, if yes how.
thank you
maxthank you, but I'm not understand what you mean. I need to run this command in answer "direct access database"
exec storedprocedure 1,1,1
if I run this I receive thi error:
error : [nQSError: 16001] ODBC error state: S0002 code: 208 message: [Microsoft][ODBC SQL Server Driver][SQL Server]object name '#TempList' not valid.. [nQSError: 16002] Cannot obtain number of columns for the query result. (HY000).
here is the code of stored procedure:
ROC [dbo].[GetOrderListmax]
@OrderList varchar(500)
AS
BEGIN
SET NOCOUNT ON
CREATE TABLE #TempList
OrderID int
DECLARE @OrderID varchar(10), @Pos int
SET @OrderList = LTRIM(RTRIM(@OrderList))+ ','
SET @Pos = CHARINDEX(',', @OrderList, 1)
IF REPLACE(@OrderList, ',', '') <> ''
BEGIN
WHILE @Pos > 0
BEGIN
SET @OrderID = LTRIM(RTRIM(LEFT(@OrderList, @Pos - 1)))
IF @OrderID <> ''
BEGIN
INSERT INTO #TempList (OrderID) VALUES (CAST(@OrderID AS int)) --Use Appropriate conversion
END
SET @OrderList = RIGHT(@OrderList, LEN(@OrderList) - @Pos)
SET @Pos = CHARINDEX(',', @OrderList, 1)
END
END
SELECT o.OrderID, CustomerID, EmployeeID, OrderDate
FROM dbo.Orders AS o
JOIN
#TempList t
ON o.OrderID = t.OrderID
END -
How to run @catbundle.sql
Hello
we are planning to apply patch for our Oracle RDBMS 11.2.0.2(3 node RAC) on RHEl 5.6.The patch is GI PSU 11.2.0.2.7
Now in the post-installation steps i need to run catbundle.sql script, for that do i need to shutdown the database(all instances), startup only one instance, run the script and start the database(all instances) or i can run the script from one instance with all remaining instances up and running.
ThanksHi;
As mention here you can find how you should use catbundle.sql in patch's read me part.
I suggest also review:
catbundle.sql - FAQ [ID 834644.1]
Introduction To Oracle Database catbundle.sql [ID 605795.1]
Regard
Helios -
Hi
eBS
DB: 11.1.7
APS: R12.1.2
Does anyone who can guide me how to run script for .sql
I need command on how to execute this |
Run the script poxrespo.sql in the PO_TOP/sql directory
ThanksDoes anyone who can guide me how to run script for .sql
I need command on how to execute this |
Run the script poxrespo.sql in the PO_TOP/sql directoryConnect as apps user to SQL*Plus as run the script.
Make sure COMMIT is issued -- Release Notifications Error - ORA-20002 2018 Unable To Generate The Notification Content [ID 342734.1
Thanks,
Hussein -
How to run multiple sqls in one jasper report
Hello!
Is there any one that can help me in integrating/ viewing my xml file to the web. I have my GUI in jsp format, the jsp makes a call to the bean class and then finally bean class hit my reports java class.The report java class generates the report and shows it in the new window.
The problem is with writing mutiple sql queries and showing the result from multiple sql queires in one report.
I do not know how to write multiple queries for just 1 report. I can give a simple example of my problem also.
My report is as follows:
First Name Middle Name Last name
Sandeep Pathak
Now First and Middle Name come from 1st sql query and Last Name comes from 2nd sql query.
I want to join the result obtained from both the sql queries in one Jasper Report (not as 2 separate sections but as one section).
My problem is how to view my report in the web. furthermore, how to make complex query in jasperassistant, like multiple table in one query, because i�m integrating multiple query in one form or sheets of paper.
Please help me in this.
Thanks
Sandeep
Calance
IndiaHi Sheldon,
we never have issues when we combine standard objects, like a cliear with a load inforprovider, or the master data integration you mentioned in your document. However, from the moment we combine a script logic with a standard package (like a move) it does not work .The data package contains the task needed for the script and for the move. the process chain is called up but always comes in error in the first step (BPC modify dynamically ) ... there is also no log when checking the view status ...
I can sent you some screenshots if you like ...
D -
How to run recordset SQL query in FORM DATA event
How can I run recordset SQL query in FORM DATA event upon clicking on Add button in the document?
Hi Slamet,
When you receive a form data event you have a class containing inside it a ObjectKeys xml info regarding the object added/modified,...
With the objects keys you can then use the DI API method called GetByKeys to obtain the DI Object.
There is some information about it in the SDK Help file, mainly in the "FormDataEvent" class definition:
<i>The event provides the unique ID (BusinessObjectInfo.ObjectKey) of the modified business object. You can use the value of this property as an input parameter in the DI API DataBrowser.GetByKeys method to get a DI object.</i>
Pay attention you don't have this information in the Before=True event of the Add as it is not yet in the database.
Hope it helps
Trinidad.
Maybe you are looking for
-
Help. I have a cable and adaptor to connect my macbook to my sony bravia tv. On the TV I get the purpley sunrise picture and if I drag the macbook screen image to the right it appears on the tv (like it is on the next page), but obvioulsly the two ar
-
Database Link Error ORA-00904: "function_name": invalid identifier
Hi Everyone, We are using Oracle9i Enterprise Edition Release 9.2.0.6.0 - 64bit Production. We have production and reporting databases. We have a link from reporting to production that we use to create tables on the reporting database by selecting fr
-
I've had my iPad mini since Christmas and have had no issues until yesterday. I am having issues with slow, lagging streaming on sites such as YouTube and Netflix. I've already reset it and cleared all my apps. I think it's a problem with safari. How
-
Changing a Template to A6 brochure
Hi I am very happy to use the templates in iWork08, but am trying to turn one into an A6 brochure, which is basically an A4 folded in half. Using the Page Setup, alters the page but not the document (You get half the document cut out). Is there any w
-
Trigger which fire on a specific time ?
Hello expert, my requirement is to automatically cancel requisition's which are older than 3 day's. for this i have to create some trigger. i created a trigger on database startup , but if i do not restart my server than it will not work. i also have