How to save an image into the RTF Viewer
RTF Viewer.
The current problem that I have with the RTFViewer is that the RTFEditor allows for images to be inserted but on save the images get lost and no information on the images are saved.
daregazi wrote:
I have posted my problem before, nobody replied so I ask again if anybody has any solution??
I want to save an image, which I created before from a physical file and did some bit-level manipulation, into the same or a new (doesn't matter) physical file (say in png format). But I do not know how to do it. I have tried the FileConnection API and OutputStream and then the method write() to write the byte array, rather this does not solve my problem. I need something like corresponding to J2SE ImageIO.write(image,null) function. Any Idea??
please.....I don't think it's possible in a midlet. You'll have to save the data as a byte[] to a RecordStore and then convert it back again if you want the midlet to redisplay it.
Similar Messages
-
How do I get images into the "images" folder with Dreamweaver CS4?
Hi,
I've been following the tutorial by Christopher Heng, on chapter 2, adding images. "Look at the right panel of the web editor. You should see at least two major sections: the top section has a tab entitled "INSERT", and the bottom section has a tab labelled "FILES""...
I don't see the tab "Insert", but do see "Files" and have created a folder in there called "Images", as Mr. Heng explained.
The next step sounds easy enough - copy your image files into the images folder. But for the life of me I can't seem to do this. Can someone PLEASE help me out?
Thank you - LouiseDo you mean you can't get your images into the images folder of your site?
Open the folder with your images in it on the desktop,
not inside dreamweaver,
and open the folder you want to put the images on your desktop too,
so both folders are open,
right click the image, copy and paste it to your website images folder
or double-click the image and drag it across into the website images folder.
You could also open the image in your image editing software and 'save as'
then browse to your website images folder and save there.
Daniel -
How to save an image into an image file?
I have posted my problem before, nobody replied so I ask again if anybody has any solution??
I want to save an image, which I created before from a physical file and did some bit-level manipulation, into the same or a new (doesn't matter) physical file (say in png format). But I do not know how to do it. I have tried the FileConnection API and OutputStream and then the method write() to write the byte array, rather this does not solve my problem. I need something like corresponding to J2SE ImageIO.write(image,null) function. Any Idea??
please.....daregazi wrote:
I have posted my problem before, nobody replied so I ask again if anybody has any solution??
I want to save an image, which I created before from a physical file and did some bit-level manipulation, into the same or a new (doesn't matter) physical file (say in png format). But I do not know how to do it. I have tried the FileConnection API and OutputStream and then the method write() to write the byte array, rather this does not solve my problem. I need something like corresponding to J2SE ImageIO.write(image,null) function. Any Idea??
please.....I don't think it's possible in a midlet. You'll have to save the data as a byte[] to a RecordStore and then convert it back again if you want the midlet to redisplay it. -
How do you include images into the swf file?
I have an application that dynamically loads images from a folder to display in the application. Images display fine in the app through the IDE. Since these are not embeded images, compiling the swf leaves them out. How do I get them in? Specifically, how do I do this through the mxmlc ANT task?
This is what I am doing in the code:
new BitmapFileMaterial("components/test/images/testimage.png")
So basically the image needs to be in this location within the created swf file.
Thanks for any help.You have to use the metadata in your source code. You can't alter where the Image will find the data at compile time. It is better to not embed images in most cases, especially if they are big.
If you're asking how to get ANT to copy your image files somewhere, see the ANT doc. I'm pretty sure there's a tag
Alex Harui
Flex SDK Developer
Adobe Systems Inc.
Blog: http://blogs.adobe.com/aharui -
How-to automatically center images in the Editor View at opening?
Hello all,
Every time I open a pic in the Editor (using CTRL+I) from a pic in the Organizer, the pic is in a separate window aligned on the left of the Editor workspace.
I have to drag the pic up to the center where I get the blue lines around it so that it occupies the center of the workspace.
It seems to me that this behaviour has started with PE 8, I recall (maybe wrongly) not having this behaviour in PE 7.
Does anybondy know how to configure the whole shemabang so that a pic that is opened occupies the fill Editor workspace and is centered?
Thanks in advance,
Cheers,PSE8 introduced file browsing in tabs; similar to CS4.
This is progress! -
How to store an image into MySQL db using BlazeDS and Hibernate?
Hi!
I am using Flash Builder 4.6, BlazeDS, and Hibernate. How to store a webcam snapshot into the MySql Database. I stored Form Items by using RemoteObject into the database. But I failed to store webcam snapshot. I captured that image on Panel component.I converted that image to ByteArray. Now I want to save that image into the database. Please help me in this regard.
thanks in advance.
Here the Code:
VisitorEntryForm.mxml
<?xml version="1.0" encoding="utf-8"?>
<mx:TitleWindow
xmlns:mx="http://www.adobe.com/2006/mxml"
xmlns:vo="com.visitor.vo.*"
width="600"
height="300"
defaultButton="{submitButton}"
showCloseButton="true"
creationComplete="creationCompleteHandler();"
close="PopUpManager.removePopUp(this);"
title="Visitor Entry Form" xmlns:text="flash.text.*">
<mx:RemoteObject id="saveService" destination="visitorService" result="handleSaveResult(event)" fault="handleFault(event)" showBusyCursor="true" />
<vo:Visitor id="visitor"
vType="{vTypeField.text}"
vPurpose="{vPurposeField.text}"
vName="{vNameField.text}"
vAddress="{vAddressField.text}"
cPerson="{cPersonField.text}"
cAddress="{cAddressField.text}"
/>
<mx:Script>
<![CDATA[
import mx.managers.PopUpManager;
import flash.media.Camera;
import com.visitor.vo.WebCam;
import com.visitor.vo.Base64;
import mx.core.UIComponent;
import mx.graphics.codec.JPEGEncoder;
import mx.controls.Alert;
import mx.containers.Canvas;
import mx.rpc.events.ResultEvent;
import mx.rpc.events.FaultEvent;
import mx.events.ValidationResultEvent;
import mx.validators.Validator;
[Bindable]
private var webCam: com.visitor.vo.WebCam;
[Bindable]
private var message:String;
[Bindable]
private var formIsValid:Boolean = false;
[Bindable]
public var formIsEmpty:Boolean;
private var focussedFormControl:DisplayObject;
private function handleSaveResult(ev:ResultEvent):void {
clearFormHandler();
validateForm(ev);
Alert.show("Visitor successfully created/updated.", "Information", Alert.OK, null, null, null, Alert.OK);
// Reload the list.
parentApplication.listConsultants.loaderService.getConsultants();
PopUpManager.removePopUp(this);
private function handleFault(ev:FaultEvent):void {
message = "Error: " + ev.fault.faultCode + " \n "
+ "Detail: " + ev.fault.faultDetail + " \n "
+ "Message: " + ev.fault.faultString;
public function saveVisitor():void {
saveService.addUpdateVisitor(visitor);
private function creationCompleteHandler():void {
init();
PopUpManager.centerPopUp(this);
resetFocus();
private function resetFocus():void {
focusManager.setFocus(vTypeField);
public function validateForm(event:Event):void {
focussedFormControl = event.target as DisplayObject;
formIsValid = true;
// Check if form is empty
formIsEmpty = (vTypeField.text == "" && vPurposeField.text == "" && vNameField.text == "" && vAddressField.text == "" && cPersonField.text == "" && cAddressField.text == "");
validate(vTypeValidator);
validate(vPurposeValidator);
validate(vNameValidator);
validate(vAddressValidator);
validate(cPersonValidator);
validate(cAddressValidator);
private function validate(validator:Validator):Boolean {
var validatorSource:DisplayObject = validator.source as DisplayObject;
var suppressEvents:Boolean = (validatorSource != focussedFormControl);
var event:ValidationResultEvent = validator.validate(null, suppressEvents);
var currentControlIsValid:Boolean = (event.type == ValidationResultEvent.VALID);
formIsValid = formIsValid && currentControlIsValid;
return currentControlIsValid;
private function clearFormHandler():void {
// Clear all input fields.
vTypeField.text = "";
vPurposeField.text = "";
vNameField.text = "";
vAddressField.text = "";
cPersonField.text = "";
cAddressField.text = "";
message = "";
// Clear validation error messages.
vTypeField.errorString = "";
vPurposeField.errorString = "";
vNameField.errorString = "";
vAddressField.errorString = "";
cPersonField.errorString = "";
cAddressField.errorString = "";
formIsEmpty = true;
formIsValid = false;
resetFocus();
private function init():void {
webCam = new WebCam(97,97);
var ref:UIComponent = new UIComponent();
preview.removeAllChildren();
preview.addChild(ref);
ref.addChild(webCam);
private function takeSnapshot():void {
imageViewer.visible = true;
imageViewer.width = preview.width;
imageViewer.height = preview.height;
var uiComponent : UIComponent = new UIComponent();
uiComponent.width = webCam.width;
uiComponent.height = webCam.height;
var photoData:Bitmap = webCam.getSnapshot();
var photoBitmap:BitmapData = photoData.bitmapData;
uiComponent.addChild(photoData);
imageViewer.removeAllChildren();
imageViewer.addChild(uiComponent);
private function uploadSnapshot():void
if (imageViewer.getChildren().length > 0)
var uic:UIComponent = imageViewer.getChildAt(0) as UIComponent;
var bitmap:Bitmap = uic.getChildAt(0) as Bitmap;
var jpgEncoder:JPEGEncoder = new JPEGEncoder(75);
var jpgBytes:ByteArray = jpgEncoder.encode(bitmap.bitmapData);
private function deleteSnapshot():void
imageViewer.removeAllChildren();
]]>
</mx:Script>
<mx:StringValidator id="vTypeValidator" source="{vTypeField}" property="text" minLength="2" required="true" />
<mx:StringValidator id="vPurposeValidator" source="{vPurposeField}" property="text" minLength="2" required="true" />
<mx:StringValidator id="vNameValidator" source="{vNameField}" property="text" minLength="2" required="true" />
<mx:StringValidator id="vAddressValidator" source="{vAddressField}" property="text" minLength="5" required="true" />
<mx:StringValidator id="cPersonValidator" source="{cPersonField}" property="text" minLength="2" required="true" />
<mx:StringValidator id="cAddressValidator" source="{cAddressField}" property="text" minLength="5" required="true" />
<mx:Grid width="575" height="211">
<mx:GridRow width="575" height="211">
<mx:GridItem width="301" height="235">
<mx:Form width="301" height="208">
<mx:FormItem label="Visitor's Type">
<mx:ComboBox id="vTypeField" text="{visitor.vType}" change="validateForm(event);" editable="true">
<mx:Array>
<mx:String></mx:String>
<mx:String>Contractor</mx:String>
<mx:String>Supplier</mx:String>
<mx:String>Transporter</mx:String>
<mx:String>Plant</mx:String>
<mx:String>Non-Plant</mx:String>
</mx:Array>
</mx:ComboBox>
</mx:FormItem>
<mx:FormItem label="Visit Purpose">
<mx:ComboBox id="vPurposeField" text="{visitor.vPurpose}" change="validateForm(event);" editable="true">
<mx:Array>
<mx:String></mx:String>
<mx:String>Official</mx:String>
<mx:String>Personal</mx:String>
</mx:Array>
</mx:ComboBox>
</mx:FormItem>
<mx:FormItem label="Visitor's Name">
<mx:TextInput id="vNameField" text="{visitor.vName}" change="validateForm(event);"/>
</mx:FormItem>
<mx:FormItem label="Address">
<mx:TextInput id="vAddressField" text="{visitor.vAddress}" change="validateForm(event);"/>
</mx:FormItem>
<mx:FormItem label="Contact Person">
<mx:TextInput id="cPersonField" text="{visitor.cPerson}" change="validateForm(event);"/>
</mx:FormItem>
<mx:FormItem label="Address">
<mx:TextInput id="cAddressField" text="{visitor.cAddress}" change="validateForm(event);"/>
</mx:FormItem>
</mx:Form>
</mx:GridItem>
<mx:GridItem width="264" height="193">
<mx:Grid width="241" height="206">
<mx:GridRow width="100%" height="100%">
<mx:GridItem width="100%" height="100%" horizontalAlign="center" verticalAlign="middle">
<mx:Panel width="100" height="132" title="Snap" id="preview" layout="absolute"/>
</mx:GridItem>
<mx:GridItem width="100%" height="100%" horizontalAlign="center" verticalAlign="middle">
<mx:Panel width="100" height="132" title="Preview" id="imageViewer" layout="absolute"/>
</mx:GridItem>
</mx:GridRow>
<mx:GridRow width="100%" height="27" >
<mx:GridItem width="100%" height="100%" horizontalAlign="center">
<mx:Button id="snapshot" x="2" width="106" height="27" label="Snap"
click="takeSnapshot();"/>
</mx:GridItem>
<mx:GridItem width="100%" height="100%" horizontalAlign="center">
<mx:Button id="deleteButton" x="1" width="106" height="27" label="Delete"
click="deleteSnapshot();"/>
</mx:GridItem>
</mx:GridRow>
</mx:Grid>
</mx:GridItem>
</mx:GridRow>
</mx:Grid>
<mx:ControlBar height="40" horizontalAlign="center">
<mx:Button label="Save Visitor" id="submitButton" enabled="{formIsValid}" click="saveVisitor();" />
<mx:Button label="Clear form" enabled="{!formIsEmpty}" click="clearFormHandler();" />
<mx:Button label="Cancel" click="PopUpManager.removePopUp(this);"/>
<mx:Label width="211" id="state"/>
</mx:ControlBar>
<mx:Text text="{message}" fontWeight="bold" width="300"/>
</mx:TitleWindow>
ListVisitors.mxml
<?xml version="1.0" encoding="utf-8"?>
<mx:Panel
xmlns:mx="http://www.adobe.com/2006/mxml"
xmlns:view="com.visitor.view.*"
width="100%"
height="100%"
title="Visitor Management System - Found {visitorRecords} visitors."
creationComplete="loadVisitors();">
<mx:RemoteObject id="loaderService" destination="visitorService" result="handleLoadResult(event)" fault="handleFault(event)" showBusyCursor="true" />
<mx:RemoteObject id="deleteService" destination="visitorService" result="handleDeleteResult(event)" fault="handleFault(event)" showBusyCursor="true" />
<mx:Script>
<![CDATA[
import com.visitor.vo.Visitor;
import mx.controls.Alert;
import mx.managers.PopUpManager;
import mx.containers.TitleWindow;
import mx.collections.ArrayCollection;
import mx.rpc.events.ResultEvent;
import mx.rpc.events.FaultEvent;
[Bindable]
private var message:String;
[Bindable]
private var visitors:ArrayCollection = new ArrayCollection();
[Bindable]
private var visitorRecords:int = 0;
public function loadVisitors():void {
loaderService.getVisitors();
private function deleteVisitor():void {
if(dataGrid.selectedItem != null) {
var selectedItem:Visitor = dataGrid.selectedItem as Visitor;
deleteService.deleteVisitor(selectedItem.visitorId);
private function createVisitor():void {
var titleWindow:VisitorEntryForm = VisitorEntryForm(PopUpManager.createPopUp(this, VisitorEntryForm, true));
titleWindow.setStyle("borderAlpha", 0.9);
titleWindow.formIsEmpty = true;
private function updateVisitor():void {
var titleWindow:VisitorEntryForm = VisitorEntryForm(PopUpManager.createPopUp(this, VisitorEntryForm, true));
titleWindow.setStyle("borderAlpha", 0.9);
titleWindow.visitor = dataGrid.selectedItem as Visitor;
titleWindow.formIsEmpty = false;
private function handleLoadResult(ev:ResultEvent):void {
visitors = ev.result as ArrayCollection;
visitorRecords = visitors.length;
private function handleDeleteResult(ev:ResultEvent):void {
Alert.show("The visitor has been deleted.", "Information", Alert.OK, null, null, null, Alert.OK);
loadVisitors();
private function handleFault(ev:FaultEvent):void {
message = "Error: "
+ ev.fault.faultCode + " - "
+ ev.fault.faultDetail + " - "
+ ev.fault.faultString;
]]>
</mx:Script>
<mx:VBox width="100%" height="100%">
<mx:Label text="{message}" fontWeight="bold" includeInLayout="false" />
<mx:DataGrid
id="dataGrid"
width="100%"
height="100%"
dataProvider="{visitors}"
doubleClickEnabled="true"
doubleClick="updateVisitor()" >
<mx:columns>
<mx:DataGridColumn dataField="visitorId" headerText="Visitor ID" width="100"/>
<mx:DataGridColumn dataField="vType" headerText="Visitor's Type" />
<mx:DataGridColumn dataField="vPurpose" headerText="Visit Purpose" />
<mx:DataGridColumn dataField="vName" headerText="Visitor's Name" />
<mx:DataGridColumn dataField="vAddress" headerText="Visitor's Address" />
<mx:DataGridColumn dataField="cPerson" headerText="Contact Person" />
<mx:DataGridColumn dataField="cAddress" headerText="Contact Address" />
<mx:DataGridColumn dataField="timeIn" headerText="Time-In" />
<mx:DataGridColumn dataField="timeOut" headerText="Time-Out" />
<mx:DataGridColumn dataField="vPhoto" headerText="Visitor's Photo" />
</mx:columns>
</mx:DataGrid>
<mx:ControlBar horizontalAlign="center">
<mx:Button label="Create Visitor" click="createVisitor()" toolTip="Create a new visitor and store it in the database." />
<mx:Button label="Update Visitor" click="updateVisitor()" enabled="{dataGrid.selectedItem}" toolTip="Update an existing database visitor." />
<mx:Button label="Delete Visitor" click="deleteVisitor()" enabled="{dataGrid.selectedItem}" toolTip="Delete the visitor from the database." />
<mx:Button label="Reload Data" click="loadVisitors()" toolTip="Reload the visitor list from the database." />
</mx:ControlBar>
</mx:VBox>
</mx:Panel>
Visitor.as
package com.visitor.vo
import mx.controls.Image;
import spark.primitives.BitmapImage;
[Bindable]
[RemoteClass(alias="com.visitor.Visitor")]
public class Visitor
public function Visitor()
public var visitorId:Number;
public var vType:String;
public var vPurpose:String;
public var vName:String;
public var vAddress:String;
public var cPerson:String;
public var cAddress:String;
public var timeIn:Date;
public var timeOut:Date;
public var vPhoto: Image;
Visitor.java
package com.visitor;
import java.sql.Blob;
import java.sql.Timestamp;
import javax.persistence.Basic;
import javax.persistence.Column;
import javax.persistence.Entity;
import javax.persistence.GeneratedValue;
import javax.persistence.GenerationType;
import javax.persistence.Id;
import javax.persistence.NamedQueries;
import javax.persistence.NamedQuery;
import javax.persistence.Table;
import org.hibernate.annotations.Index;
@Entity
@Table(name = "visitors")
@NamedQueries( {
@NamedQuery(name = "visitors.findAll", query = "from Visitor"),
@NamedQuery(name = "visitors.byId", query = "select v from Visitor v where v.visitorId= :visitorId") })
public class Visitor {
@Id
@GeneratedValue(strategy = GenerationType.AUTO)
@Column(name = "visitorId", nullable = false)
private Long visitorId;
@Basic
@Index(name = "vType_idx_1")
@Column(name = "vType", nullable = true, unique = false)
private String vType;
@Basic
@Column(name = "vPurpose", nullable = true, unique = false)
private String vPurpose;
@Basic
@Column(name = "vName", nullable = true, unique = false)
private String vName;
@Basic
@Column(name = "vAddress", nullable = true, unique = false)
private String vAddress;
@Basic
@Column(name = "cPerson", nullable = true, unique = false)
private String cPerson;
@Basic
@Column(name = "cAddress", nullable = true, unique = false)
private String cAddress;
@Basic
@Column(name = "timeIn", nullable = false, unique = false)
private Timestamp timeIn;
@Basic
@Column(name = "timeOut", nullable = true, unique = false)
private Timestamp timeOut;
@Basic
@Column(name = "vPhoto", nullable = true, unique = false)
private Blob vPhoto;
public Visitor() {
super();
public Long getVisitorId() {
return visitorId;
public void setVisitorId(Long visitorId) {
this.visitorId = visitorId;
public String getvType() {
return vType;
public void setvType(String vType) {
this.vType = vType;
public String getvPurpose() {
return vPurpose;
public void setvPurpose(String vPurpose) {
this.vPurpose = vPurpose;
public String getvName() {
return vName;
public void setvName(String vName) {
this.vName = vName;
public String getvAddress() {
return vAddress;
public void setvAddress(String vAddress) {
this.vAddress = vAddress;
public String getcPerson() {
return cPerson;
public void setcPerson(String cPerson) {
this.cPerson = cPerson;
public String getcAddress() {
return cAddress;
public void setcAddress(String cAddress) {
this.cAddress = cAddress;
public Timestamp getTimeIn() {
return timeIn;
public void setTimeIn(Timestamp timeIn) {
this.timeIn = timeIn;
public Timestamp getTimeOut() {
return timeOut;
public void setTimeOut(Timestamp timeOut) {
this.timeOut = timeOut;
public Blob getvPhoto() {
return vPhoto;
public void setvPhoto(Blob vPhoto) {
this.vPhoto = vPhoto;
VisitorService.java
package com.visitor;
import java.sql.Timestamp;
import java.util.Date;
import java.util.List;
import javax.persistence.EntityManager;
import javax.persistence.EntityManagerFactory;
import javax.persistence.EntityTransaction;
import javax.persistence.Persistence;
import javax.persistence.Query;
import org.apache.log4j.Logger;
public class VisitorService {
private static final String PERSISTENCE_UNIT = "visitor_db";
private static Logger logger = Logger.getLogger(VisitorService.class);
public VisitorService() {
super();
public List<Visitor> getvisitors() {
logger.debug("** getVisitors called...");
EntityManagerFactory entityManagerFactory = Persistence
.createEntityManagerFactory(PERSISTENCE_UNIT);
EntityManager em = entityManagerFactory.createEntityManager();
Query findAllQuery = em.createNamedQuery("visitors.findAll");
List<Visitor> visitors = findAllQuery.getResultList();
if (visitors != null)
logger.debug("** Found " + visitors.size() + " records:");
return visitors;
public void addUpdateVisitor(Visitor visitor) throws Exception {
logger.debug("** addUpdateVisitor called...");
EntityManagerFactory emf = Persistence
.createEntityManagerFactory(PERSISTENCE_UNIT);
EntityManager em = emf.createEntityManager();
// When passing Boolean and Number values from the Flash client to a
// Java object, Java interprets null values as the default values for
// primitive types; for example, 0 for double, float, long, int, short,
// byte.
if (visitor.getVisitorId() == null || visitor.getVisitorId() == 0) {
// New consultant is created
visitor.setVisitorId(null);
visitor.setTimeIn(new Timestamp(new Date().getTime()));
} else {
visitor.setTimeOut(new Timestamp(new Date().getTime()));
// Existing consultant is updated - do nothing.
EntityTransaction tx = em.getTransaction();
tx.begin();
try {
em.merge(visitor);
tx.commit();
} catch (Exception e) {
logger.error("** Error: " + e.getMessage());
tx.rollback();
throw new Exception(e.getMessage());
} finally {
logger.info("** Closing Entity Manager.");
em.close();
public void deleteVisitor(Long visitorId) {
logger.debug("** deleteVisitor called...");
EntityManagerFactory emf = Persistence
.createEntityManagerFactory(PERSISTENCE_UNIT);
EntityManager em = emf.createEntityManager();
Query q = em.createNamedQuery("visitors.byId");
q.setParameter("visitorId", visitorId);
Visitor visitor = (Visitor) q.getSingleResult();
if (visitor != null) {
EntityTransaction tx = em.getTransaction();
tx.begin();
try {
em.remove(visitor);
tx.commit();
} catch (Exception e) {
logger.error("** Error: " + e.getMessage());
tx.rollback();
} finally {
logger.info("** Closing Entity Manager.");
em.close();
remoting-config.xml
<?xml version="1.0" encoding="UTF-8"?>
<service id="remoting-service" class="flex.messaging.services.RemotingService">
<adapters>
<adapter-definition id="java-object"
class="flex.messaging.services.remoting.adapters.JavaAdapter"
default="true" />
</adapters>
<default-channels>
<channel ref="my-amf" />
</default-channels>
<!-- ADC Demo application -->
<destination id="visitorService">
<properties>
<source>com.visitor.VisitorService</source>
</properties>
</destination>
</service>Hi!
I am using Flash Builder 4.6, BlazeDS, and Hibernate. How to store a webcam snapshot into the MySql Database. I stored Form Items by using RemoteObject into the database. But I failed to store webcam snapshot. I captured that image on Panel component.I converted that image to ByteArray. Now I want to save that image into the database. Please help me in this regard.
thanks in advance.
Here the Code:
VisitorEntryForm.mxml
<?xml version="1.0" encoding="utf-8"?>
<mx:TitleWindow
xmlns:mx="http://www.adobe.com/2006/mxml"
xmlns:vo="com.visitor.vo.*"
width="600"
height="300"
defaultButton="{submitButton}"
showCloseButton="true"
creationComplete="creationCompleteHandler();"
close="PopUpManager.removePopUp(this);"
title="Visitor Entry Form" xmlns:text="flash.text.*">
<mx:RemoteObject id="saveService" destination="visitorService" result="handleSaveResult(event)" fault="handleFault(event)" showBusyCursor="true" />
<vo:Visitor id="visitor"
vType="{vTypeField.text}"
vPurpose="{vPurposeField.text}"
vName="{vNameField.text}"
vAddress="{vAddressField.text}"
cPerson="{cPersonField.text}"
cAddress="{cAddressField.text}"
/>
<mx:Script>
<![CDATA[
import mx.managers.PopUpManager;
import flash.media.Camera;
import com.visitor.vo.WebCam;
import com.visitor.vo.Base64;
import mx.core.UIComponent;
import mx.graphics.codec.JPEGEncoder;
import mx.controls.Alert;
import mx.containers.Canvas;
import mx.rpc.events.ResultEvent;
import mx.rpc.events.FaultEvent;
import mx.events.ValidationResultEvent;
import mx.validators.Validator;
[Bindable]
private var webCam: com.visitor.vo.WebCam;
[Bindable]
private var message:String;
[Bindable]
private var formIsValid:Boolean = false;
[Bindable]
public var formIsEmpty:Boolean;
private var focussedFormControl:DisplayObject;
private function handleSaveResult(ev:ResultEvent):void {
clearFormHandler();
validateForm(ev);
Alert.show("Visitor successfully created/updated.", "Information", Alert.OK, null, null, null, Alert.OK);
// Reload the list.
parentApplication.listConsultants.loaderService.getConsultants();
PopUpManager.removePopUp(this);
private function handleFault(ev:FaultEvent):void {
message = "Error: " + ev.fault.faultCode + " \n "
+ "Detail: " + ev.fault.faultDetail + " \n "
+ "Message: " + ev.fault.faultString;
public function saveVisitor():void {
saveService.addUpdateVisitor(visitor);
private function creationCompleteHandler():void {
init();
PopUpManager.centerPopUp(this);
resetFocus();
private function resetFocus():void {
focusManager.setFocus(vTypeField);
public function validateForm(event:Event):void {
focussedFormControl = event.target as DisplayObject;
formIsValid = true;
// Check if form is empty
formIsEmpty = (vTypeField.text == "" && vPurposeField.text == "" && vNameField.text == "" && vAddressField.text == "" && cPersonField.text == "" && cAddressField.text == "");
validate(vTypeValidator);
validate(vPurposeValidator);
validate(vNameValidator);
validate(vAddressValidator);
validate(cPersonValidator);
validate(cAddressValidator);
private function validate(validator:Validator):Boolean {
var validatorSource:DisplayObject = validator.source as DisplayObject;
var suppressEvents:Boolean = (validatorSource != focussedFormControl);
var event:ValidationResultEvent = validator.validate(null, suppressEvents);
var currentControlIsValid:Boolean = (event.type == ValidationResultEvent.VALID);
formIsValid = formIsValid && currentControlIsValid;
return currentControlIsValid;
private function clearFormHandler():void {
// Clear all input fields.
vTypeField.text = "";
vPurposeField.text = "";
vNameField.text = "";
vAddressField.text = "";
cPersonField.text = "";
cAddressField.text = "";
message = "";
// Clear validation error messages.
vTypeField.errorString = "";
vPurposeField.errorString = "";
vNameField.errorString = "";
vAddressField.errorString = "";
cPersonField.errorString = "";
cAddressField.errorString = "";
formIsEmpty = true;
formIsValid = false;
resetFocus();
private function init():void {
webCam = new WebCam(97,97);
var ref:UIComponent = new UIComponent();
preview.removeAllChildren();
preview.addChild(ref);
ref.addChild(webCam);
private function takeSnapshot():void {
imageViewer.visible = true;
imageViewer.width = preview.width;
imageViewer.height = preview.height;
var uiComponent : UIComponent = new UIComponent();
uiComponent.width = webCam.width;
uiComponent.height = webCam.height;
var photoData:Bitmap = webCam.getSnapshot();
var photoBitmap:BitmapData = photoData.bitmapData;
uiComponent.addChild(photoData);
imageViewer.removeAllChildren();
imageViewer.addChild(uiComponent);
private function uploadSnapshot():void
if (imageViewer.getChildren().length > 0)
var uic:UIComponent = imageViewer.getChildAt(0) as UIComponent;
var bitmap:Bitmap = uic.getChildAt(0) as Bitmap;
var jpgEncoder:JPEGEncoder = new JPEGEncoder(75);
var jpgBytes:ByteArray = jpgEncoder.encode(bitmap.bitmapData);
private function deleteSnapshot():void
imageViewer.removeAllChildren();
]]>
</mx:Script>
<mx:StringValidator id="vTypeValidator" source="{vTypeField}" property="text" minLength="2" required="true" />
<mx:StringValidator id="vPurposeValidator" source="{vPurposeField}" property="text" minLength="2" required="true" />
<mx:StringValidator id="vNameValidator" source="{vNameField}" property="text" minLength="2" required="true" />
<mx:StringValidator id="vAddressValidator" source="{vAddressField}" property="text" minLength="5" required="true" />
<mx:StringValidator id="cPersonValidator" source="{cPersonField}" property="text" minLength="2" required="true" />
<mx:StringValidator id="cAddressValidator" source="{cAddressField}" property="text" minLength="5" required="true" />
<mx:Grid width="575" height="211">
<mx:GridRow width="575" height="211">
<mx:GridItem width="301" height="235">
<mx:Form width="301" height="208">
<mx:FormItem label="Visitor's Type">
<mx:ComboBox id="vTypeField" text="{visitor.vType}" change="validateForm(event);" editable="true">
<mx:Array>
<mx:String></mx:String>
<mx:String>Contractor</mx:String>
<mx:String>Supplier</mx:String>
<mx:String>Transporter</mx:String>
<mx:String>Plant</mx:String>
<mx:String>Non-Plant</mx:String>
</mx:Array>
</mx:ComboBox>
</mx:FormItem>
<mx:FormItem label="Visit Purpose">
<mx:ComboBox id="vPurposeField" text="{visitor.vPurpose}" change="validateForm(event);" editable="true">
<mx:Array>
<mx:String></mx:String>
<mx:String>Official</mx:String>
<mx:String>Personal</mx:String>
</mx:Array>
</mx:ComboBox>
</mx:FormItem>
<mx:FormItem label="Visitor's Name">
<mx:TextInput id="vNameField" text="{visitor.vName}" change="validateForm(event);"/>
</mx:FormItem>
<mx:FormItem label="Address">
<mx:TextInput id="vAddressField" text="{visitor.vAddress}" change="validateForm(event);"/>
</mx:FormItem>
<mx:FormItem label="Contact Person">
<mx:TextInput id="cPersonField" text="{visitor.cPerson}" change="validateForm(event);"/>
</mx:FormItem>
<mx:FormItem label="Address">
<mx:TextInput id="cAddressField" text="{visitor.cAddress}" change="validateForm(event);"/>
</mx:FormItem>
</mx:Form>
</mx:GridItem>
<mx:GridItem width="264" height="193">
<mx:Grid width="241" height="206">
<mx:GridRow width="100%" height="100%">
<mx:GridItem width="100%" height="100%" horizontalAlign="center" verticalAlign="middle">
<mx:Panel width="100" height="132" title="Snap" id="preview" layout="absolute"/>
</mx:GridItem>
<mx:GridItem width="100%" height="100%" horizontalAlign="center" verticalAlign="middle">
<mx:Panel width="100" height="132" title="Preview" id="imageViewer" layout="absolute"/>
</mx:GridItem>
</mx:GridRow>
<mx:GridRow width="100%" height="27" >
<mx:GridItem width="100%" height="100%" horizontalAlign="center">
<mx:Button id="snapshot" x="2" width="106" height="27" label="Snap"
click="takeSnapshot();"/>
</mx:GridItem>
<mx:GridItem width="100%" height="100%" horizontalAlign="center">
<mx:Button id="deleteButton" x="1" width="106" height="27" label="Delete"
click="deleteSnapshot();"/>
</mx:GridItem>
</mx:GridRow>
</mx:Grid>
</mx:GridItem>
</mx:GridRow>
</mx:Grid>
<mx:ControlBar height="40" horizontalAlign="center">
<mx:Button label="Save Visitor" id="submitButton" enabled="{formIsValid}" click="saveVisitor();" />
<mx:Button label="Clear form" enabled="{!formIsEmpty}" click="clearFormHandler();" />
<mx:Button label="Cancel" click="PopUpManager.removePopUp(this);"/>
<mx:Label width="211" id="state"/>
</mx:ControlBar>
<mx:Text text="{message}" fontWeight="bold" width="300"/>
</mx:TitleWindow>
ListVisitors.mxml
<?xml version="1.0" encoding="utf-8"?>
<mx:Panel
xmlns:mx="http://www.adobe.com/2006/mxml"
xmlns:view="com.visitor.view.*"
width="100%"
height="100%"
title="Visitor Management System - Found {visitorRecords} visitors."
creationComplete="loadVisitors();">
<mx:RemoteObject id="loaderService" destination="visitorService" result="handleLoadResult(event)" fault="handleFault(event)" showBusyCursor="true" />
<mx:RemoteObject id="deleteService" destination="visitorService" result="handleDeleteResult(event)" fault="handleFault(event)" showBusyCursor="true" />
<mx:Script>
<![CDATA[
import com.visitor.vo.Visitor;
import mx.controls.Alert;
import mx.managers.PopUpManager;
import mx.containers.TitleWindow;
import mx.collections.ArrayCollection;
import mx.rpc.events.ResultEvent;
import mx.rpc.events.FaultEvent;
[Bindable]
private var message:String;
[Bindable]
private var visitors:ArrayCollection = new ArrayCollection();
[Bindable]
private var visitorRecords:int = 0;
public function loadVisitors():void {
loaderService.getVisitors();
private function deleteVisitor():void {
if(dataGrid.selectedItem != null) {
var selectedItem:Visitor = dataGrid.selectedItem as Visitor;
deleteService.deleteVisitor(selectedItem.visitorId);
private function createVisitor():void {
var titleWindow:VisitorEntryForm = VisitorEntryForm(PopUpManager.createPopUp(this, VisitorEntryForm, true));
titleWindow.setStyle("borderAlpha", 0.9);
titleWindow.formIsEmpty = true;
private function updateVisitor():void {
var titleWindow:VisitorEntryForm = VisitorEntryForm(PopUpManager.createPopUp(this, VisitorEntryForm, true));
titleWindow.setStyle("borderAlpha", 0.9);
titleWindow.visitor = dataGrid.selectedItem as Visitor;
titleWindow.formIsEmpty = false;
private function handleLoadResult(ev:ResultEvent):void {
visitors = ev.result as ArrayCollection;
visitorRecords = visitors.length;
private function handleDeleteResult(ev:ResultEvent):void {
Alert.show("The visitor has been deleted.", "Information", Alert.OK, null, null, null, Alert.OK);
loadVisitors();
private function handleFault(ev:FaultEvent):void {
message = "Error: "
+ ev.fault.faultCode + " - "
+ ev.fault.faultDetail + " - "
+ ev.fault.faultString;
]]>
</mx:Script>
<mx:VBox width="100%" height="100%">
<mx:Label text="{message}" fontWeight="bold" includeInLayout="false" />
<mx:DataGrid
id="dataGrid"
width="100%"
height="100%"
dataProvider="{visitors}"
doubleClickEnabled="true"
doubleClick="updateVisitor()" >
<mx:columns>
<mx:DataGridColumn dataField="visitorId" headerText="Visitor ID" width="100"/>
<mx:DataGridColumn dataField="vType" headerText="Visitor's Type" />
<mx:DataGridColumn dataField="vPurpose" headerText="Visit Purpose" />
<mx:DataGridColumn dataField="vName" headerText="Visitor's Name" />
<mx:DataGridColumn dataField="vAddress" headerText="Visitor's Address" />
<mx:DataGridColumn dataField="cPerson" headerText="Contact Person" />
<mx:DataGridColumn dataField="cAddress" headerText="Contact Address" />
<mx:DataGridColumn dataField="timeIn" headerText="Time-In" />
<mx:DataGridColumn dataField="timeOut" headerText="Time-Out" />
<mx:DataGridColumn dataField="vPhoto" headerText="Visitor's Photo" />
</mx:columns>
</mx:DataGrid>
<mx:ControlBar horizontalAlign="center">
<mx:Button label="Create Visitor" click="createVisitor()" toolTip="Create a new visitor and store it in the database." />
<mx:Button label="Update Visitor" click="updateVisitor()" enabled="{dataGrid.selectedItem}" toolTip="Update an existing database visitor." />
<mx:Button label="Delete Visitor" click="deleteVisitor()" enabled="{dataGrid.selectedItem}" toolTip="Delete the visitor from the database." />
<mx:Button label="Reload Data" click="loadVisitors()" toolTip="Reload the visitor list from the database." />
</mx:ControlBar>
</mx:VBox>
</mx:Panel>
Visitor.as
package com.visitor.vo
import mx.controls.Image;
import spark.primitives.BitmapImage;
[Bindable]
[RemoteClass(alias="com.visitor.Visitor")]
public class Visitor
public function Visitor()
public var visitorId:Number;
public var vType:String;
public var vPurpose:String;
public var vName:String;
public var vAddress:String;
public var cPerson:String;
public var cAddress:String;
public var timeIn:Date;
public var timeOut:Date;
public var vPhoto: Image;
Visitor.java
package com.visitor;
import java.sql.Blob;
import java.sql.Timestamp;
import javax.persistence.Basic;
import javax.persistence.Column;
import javax.persistence.Entity;
import javax.persistence.GeneratedValue;
import javax.persistence.GenerationType;
import javax.persistence.Id;
import javax.persistence.NamedQueries;
import javax.persistence.NamedQuery;
import javax.persistence.Table;
import org.hibernate.annotations.Index;
@Entity
@Table(name = "visitors")
@NamedQueries( {
@NamedQuery(name = "visitors.findAll", query = "from Visitor"),
@NamedQuery(name = "visitors.byId", query = "select v from Visitor v where v.visitorId= :visitorId") })
public class Visitor {
@Id
@GeneratedValue(strategy = GenerationType.AUTO)
@Column(name = "visitorId", nullable = false)
private Long visitorId;
@Basic
@Index(name = "vType_idx_1")
@Column(name = "vType", nullable = true, unique = false)
private String vType;
@Basic
@Column(name = "vPurpose", nullable = true, unique = false)
private String vPurpose;
@Basic
@Column(name = "vName", nullable = true, unique = false)
private String vName;
@Basic
@Column(name = "vAddress", nullable = true, unique = false)
private String vAddress;
@Basic
@Column(name = "cPerson", nullable = true, unique = false)
private String cPerson;
@Basic
@Column(name = "cAddress", nullable = true, unique = false)
private String cAddress;
@Basic
@Column(name = "timeIn", nullable = false, unique = false)
private Timestamp timeIn;
@Basic
@Column(name = "timeOut", nullable = true, unique = false)
private Timestamp timeOut;
@Basic
@Column(name = "vPhoto", nullable = true, unique = false)
private Blob vPhoto;
public Visitor() {
super();
public Long getVisitorId() {
return visitorId;
public void setVisitorId(Long visitorId) {
this.visitorId = visitorId;
public String getvType() {
return vType;
public void setvType(String vType) {
this.vType = vType;
public String getvPurpose() {
return vPurpose;
public void setvPurpose(String vPurpose) {
this.vPurpose = vPurpose;
public String getvName() {
return vName;
public void setvName(String vName) {
this.vName = vName;
public String getvAddress() {
return vAddress;
public void setvAddress(String vAddress) {
this.vAddress = vAddress;
public String getcPerson() {
return cPerson;
public void setcPerson(String cPerson) {
this.cPerson = cPerson;
public String getcAddress() {
return cAddress;
public void setcAddress(String cAddress) {
this.cAddress = cAddress;
public Timestamp getTimeIn() {
return timeIn;
public void setTimeIn(Timestamp timeIn) {
this.timeIn = timeIn;
public Timestamp getTimeOut() {
return timeOut;
public void setTimeOut(Timestamp timeOut) {
this.timeOut = timeOut;
public Blob getvPhoto() {
return vPhoto;
public void setvPhoto(Blob vPhoto) {
this.vPhoto = vPhoto;
VisitorService.java
package com.visitor;
import java.sql.Timestamp;
import java.util.Date;
import java.util.List;
import javax.persistence.EntityManager;
import javax.persistence.EntityManagerFactory;
import javax.persistence.EntityTransaction;
import javax.persistence.Persistence;
import javax.persistence.Query;
import org.apache.log4j.Logger;
public class VisitorService {
private static final String PERSISTENCE_UNIT = "visitor_db";
private static Logger logger = Logger.getLogger(VisitorService.class);
public VisitorService() {
super();
public List<Visitor> getvisitors() {
logger.debug("** getVisitors called...");
EntityManagerFactory entityManagerFactory = Persistence
.createEntityManagerFactory(PERSISTENCE_UNIT);
EntityManager em = entityManagerFactory.createEntityManager();
Query findAllQuery = em.createNamedQuery("visitors.findAll");
List<Visitor> visitors = findAllQuery.getResultList();
if (visitors != null)
logger.debug("** Found " + visitors.size() + " records:");
return visitors;
public void addUpdateVisitor(Visitor visitor) throws Exception {
logger.debug("** addUpdateVisitor called...");
EntityManagerFactory emf = Persistence
.createEntityManagerFactory(PERSISTENCE_UNIT);
EntityManager em = emf.createEntityManager();
// When passing Boolean and Number values from the Flash client to a
// Java object, Java interprets null values as the default values for
// primitive types; for example, 0 for double, float, long, int, short,
// byte.
if (visitor.getVisitorId() == null || visitor.getVisitorId() == 0) {
// New consultant is created
visitor.setVisitorId(null);
visitor.setTimeIn(new Timestamp(new Date().getTime()));
} else {
visitor.setTimeOut(new Timestamp(new Date().getTime()));
// Existing consultant is updated - do nothing.
EntityTransaction tx = em.getTransaction();
tx.begin();
try {
em.merge(visitor);
tx.commit();
} catch (Exception e) {
logger.error("** Error: " + e.getMessage());
tx.rollback();
throw new Exception(e.getMessage());
} finally {
logger.info("** Closing Entity Manager.");
em.close();
public void deleteVisitor(Long visitorId) {
logger.debug("** deleteVisitor called...");
EntityManagerFactory emf = Persistence
.createEntityManagerFactory(PERSISTENCE_UNIT);
EntityManager em = emf.createEntityManager();
Query q = em.createNamedQuery("visitors.byId");
q.setParameter("visitorId", visitorId);
Visitor visitor = (Visitor) q.getSingleResult();
if (visitor != null) {
EntityTransaction tx = em.getTransaction();
tx.begin();
try {
em.remove(visitor);
tx.commit();
} catch (Exception e) {
logger.error("** Error: " + e.getMessage());
tx.rollback();
} finally {
logger.info("** Closing Entity Manager.");
em.close();
remoting-config.xml
<?xml version="1.0" encoding="UTF-8"?>
<service id="remoting-service" class="flex.messaging.services.RemotingService">
<adapters>
<adapter-definition id="java-object"
class="flex.messaging.services.remoting.adapters.JavaAdapter"
default="true" />
</adapters>
<default-channels>
<channel ref="my-amf" />
</default-channels>
<!-- ADC Demo application -->
<destination id="visitorService">
<properties>
<source>com.visitor.VisitorService</source>
</properties>
</destination>
</service> -
When I try to save an image under the command 'save as' it will only let me save as file types 'firefox document' or 'all files' and when I try to look at them later they dont work. How can I save an image as the same file type it is on the web site?!
== This happened ==
Every time Firefox opened
== I updated to one of the firefox versions (Not sure which one it was)Thanks Alex, but sadly I already tried that. Neither .docx or .xlsx files show up in the content list. They both show as a Chrome HTML document so changing how Firefox addresses those doesn't help since it thinks its the same type of file. I don't think I can manually add files into the "Content Type" left side nav.
-
How do I Place an image into the center of an activated artboard in CC?
I have just upgraded to CC from CS6. In CS6, I could activate an artboard (double click it in the Artboard panel) and then Place an image, which would by default go into the center of the artboard.
With CC, it "loads" the image into the cursor which I then need to Place by clicking somewhere.
How can I get it to either behave as it did in CS6, or customize to load it into the center when I click, such as with a modifier key?
Thanks!Hi,
With the Window > Allign panel,
You can select the option to allign to selection or to Artboard.
When you select "to Artboard" you schould be able to use the Allign option to get it centerred.
See preview bellow.
Hope this helps. -
How do you set an image into the background of a JPanel or JFrame?
How do you set an image into the background of a JPanel or JFrame?
Something like this, Ive thrown in an ImageIcon on a
button too for good measure.
import java.awt.*;
import javax.swing.*;
public class JFrameImage extends JFrame {
public JFrameImage() {
Container c = getContentPane();
JPanel panel = new JPanel(){
public void paintComponent(Graphics g) {
ImageIcon img = new
= new ImageIcon("background.jpg");
g.drawImage(img.getImage(), 0, 0, null);
super.paintComponent(g);
panel.setOpaque(false);
ImageIcon icon = new ImageIcon("onButton.jpg");
JButton button = new JButton(icon);
panel.add(button);
c.add(panel);
public static void main(String[] args) {
JFrameImage frame = new JFrameImage();
frame.setSize(200,200);
frame.setVisible(true);
Going totally fancy pants
ImageIcon bigImage = new ImageIcon(bgImage.getImage().getScaledInstance(getWidth(), getHeight(),Image.SCALE_REPLICATE));
g.drawImage(bigImage.getImage(), 0, 0, this); Will scale the image to the size of the panel
whereas
for (int y = 0; y < getHeight(); y = y + image.getHeight(null))
for (int x = 0; x< getWidth(); x = x + image.getWidth(null))
g.drawImage(image, x, y, this); Will give a tiled effect
Try tiling with an animated gif and bring your processor to a standstill. -
How can i add an image into the header
When printing a webpage i would like to ad an image into the header? Is this possible?
Thanks. The triangle was buried in the image. If you hadn’t told me where to look, I would never have found it!
Michelle
Michelle Lancto
Jewish Endowment Foundation
a division of the Jewish Federation of Western Massachusetts
Phone: 413-732-9994 Fax: 413-737-4348
<mailto:[email protected]> [email protected]
<http://www.jefwesternmass.org/> www.jefwesternmass.org
<http://www.jewishwesternmass.org/> www.jewishwesternmass.org
JEF_Logos_1101_JFWM for email LOW RES
Confidentiality Notice
The information contained in this message and or attachments is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from any system and destroy any copies. -
Why can't I save an image off the net into the folder of my choice?
I've used a PC all my life until two days ago when I bought my MacBook. I absolutely love it, but there are a few PC/Mac differences bugging me, and one of them is what I'm asking you all about:
When I save an image off the internet and the pop-up asks me where to save it, it suggests only a few folders for me and I can't choose the folder I actually want to save the image in. Is there any way to change this? No one else seems to have asked about this on here before, but I hope someone can help me out.Ah, it's so simple! Thank you.
-
I need to cut some image into the PDF file, what Adobe product can help me with it?
Hi Hugo,
Please elaborate your issue. What exactly do you want to achieve?
Regards,
Rahul -
How to insert dummy image into PDF
I am trying to insert signatures into our Custom Purchase Order that I am building in Adobe Acrobat 8 Pro. I can find plenty of documentation on how to do this via an RTF in Word Template Builder, but nothing on inserting the dummy image. Currently, we are using Sigfile field in report with a URL link to the jpeg of the signature, at runtime, only the link shows up on the PDF not the picture of the signature, any suggestions would be appreciated.
Thanks,
BarbaraBarbara,
I think what you are asking for is something similiar I have done for a check printing report where you have a voided image of a signature, then place the real signature at run time.
So insert the dummy image into your RTF. Have the path to the real image in the XML file, and then in the properties for the image, there is a Web tab. Put the following there:
url:{CP_SIGNIMAGEPATH}
Where CP_SIGNIMAGEPATH is the path to the image.
Let me know if this works or you.
Regards,
Brett -
How to have multiple images on the same screen? like in the movies where you see several actions at
how to have multiple images on the same screen? like in the movies where you see several actions at the same time ....
i don't find a tutorial in adobe tv....
thanks !!The short answer is that you'll put the source clip(s) for each inset on a different video track, all stacked up. Then use the Scale and Position effects (under "Motion" on the Effect Controls panel) to reduce their size and place them where you want.
If the content of an inset will involve edited content (where you're cutting among various clips or just trimming out unwanted content from a single clip), then you'll probably find it easier to do all those edits in one sequence, then nest that sequence in the master sequence, where you apply the Scale and Positioning effects. That will save the step of applying the scale and position effects to each edited track item. -
How to save a fmb in the database thru command prompt?
Hi,
How to save a fmb in the database thru command prompt?
I have around 25 fmb template files which needs to be saved in the database.Every time when we apply the new dump , we need to resave the templates in the database to compile other application related fmb files.Its a time consuming process and Monotonous for me. Is there anyway to save the forms in the database thru batch file, so that just I have to execute the batch file every time.
Expecting your earliest feedback.
Thanks & Regards,
G.S -
[email protected] / [email protected]Hi Frank,
Thanks for your feeback.
I am using forms6i.Basically our application was migrated from 4.5 to 6i two years back. Due to some reasons our technical team members are insisting us to store the template FMB's into the database to do the coding activities at site.
Once in a month we are receiving the live dump for test database.Hence the problem.
Please suggest the easiest way to store the template FMBs in the database.
Thanks & Regards,
G.S
Maybe you are looking for
-
Hi everyone, I came to these forums after I heard of the recent developments from Creative Labs. After reading what many people wrote, I?thought I would share?the story of how Creative became a part of my life. I was twelve years old when I first lea
-
Disk Utility - New Bundled SparseDisk volumes cannot change view
Running SL 10.6.1 on a early 2009 Mini. Through Disk Utility, I created a new Sparse Bundled Disk Image with 256bit encryption. That is no problem, except I cannot customize the view of the mounted image. The default is icon view, with no toolbar at
-
It will not turn off & it will not go into recovery mode. I had to completely delete & reinstall itunes just so it woulkd even show up there. Now it says "Can not connect enter correct passcode on ipod" Which of course I don't have that option. He di
-
I have a Canon ZR100 camcorder. when loading movie into iMovie, the resolution is poor quality compared to what is playing back on camera. I did not have this problem 2 months ago with the same tape (same movie). Any idea how to retain the same quali
-
My Macbook Pro is very very slow with OFFICE.. when will the new office
come out? the one that is native to OSX... not using ROSSETTA or somehting? Thanx!