How to save custom metadata display in CS4.2?

I know this has been asked in the past, but no one has come up with an answer I can find.
Here's what happens: in the project bin, I click Metadata Display, click the Premiere Project Metadata line, unclick the metadata I don't want to see, save the settings as My Setting, and go on with my day. The settings remain the same UNTIL I close the propject and open it back up and all the settings go back to default. So I open the Metadata Display back up from the project bin to reload my saved, custom settings...the (custom) bar is greyed out and not selectable, so I have to go through and do this all over.
Essentially, Premiere is NOT saving the custom settings. Why is this happening? It worked when I had 4.1. What's going on?

do a chain and endchain on the fields.Then insert the fields in to the required database.

Similar Messages

How to hide custom metadata field in custom profies ??

hi,
how to hide custom metadata dropdown list in a custom profile based on choosing the security group.
ex: if i choose xxx security group, custom metadata dropdown should not appeared, for remaining security groups it should be visible.
so, Based on criteria, custom metadata should be hidden in custom profiles..
how to achieve it ?? where and how to configure ??
Detail guidance should be required
Thanks in advance

You cannot do this through profiles alone if I understand you correctly.
If I load a check in page, choose a security group and at this moment want a custom metadata field to disappear then you are beyond what profiles offers.
Rules evaluation can only be based on information that is know at the time the page is requested. That means in order for this to work you would need to make security group an non editable field and have a set of profiles for each security group.
The alternative is to customize the UI with soem DHTML or AJAX
Tim

How to save Custom control records through module pool program ?

Hi guru ,
1. How to save Custom control records through module pool program ?
I wrote multiple lines of record in custom control
Who to save that records ?
thanking you.
Regards,
Subash.

Hi,
can refer following code -
IN PAI , CODE is as follows-
*& Form editor_output
FORM editor_output .
NARRATION1 is name of custom controller
IF v_editor IS INITIAL.
Create obejct for custom container
 CREATE OBJECT v_custom_container
 EXPORTING
 container_name = 'NARRATION1'
 EXCEPTIONS
 cntl_error = 1
 cntl_system_error = 2
 create_error = 3
 lifetime_error = 4
 lifetime_dynpro_dynpro_link = 5
 OTHERS = 6.
 IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE 'I' NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
 ENDIF.
Create obejct for the TextEditor control
 CREATE OBJECT v_editor
 EXPORTING
 wordwrap_mode = cl_gui_textedit=>wordwrap_at_fixed_position
 wordwrap_position = line_length
 wordwrap_to_linebreak_mode = cl_gui_textedit=>true
 parent = v_custom_container
 EXCEPTIONS
 error_cntl_create = 1
 error_cntl_init = 2
 error_cntl_link = 3
 error_dp_create = 4
 gui_type_not_supported = 5
 OTHERS = 6.
 IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE 'I' NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
 ENDIF.
ENDIF.
ENDFORM. " editor_output
getting textdata in internal table as follows
*& Form create_text
FORM create_text .
REFRESH : it_texttable,
 it_text.
IF v_doc_number IS NOT INITIAL.
 IF v_editor IS NOT INITIAL.
 CALL METHOD v_editor->get_text_as_r3table
 IMPORTING
 table = it_texttable
 EXCEPTIONS
 error_dp = 1
 error_cntl_call_method = 2
 error_dp_create = 3
 potential_data_loss = 4
 OTHERS = 5.
 IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
 ENDIF.
Now, our final text data is in internal table it_texttable.
pls, Reward if found helpful.

How to save Custom control records ?

Hi guru ,
1. How to save Custom control records module pool program ?
I wrote multiple lines of record in custom control
Who to save that records ?
thanking you.
Regards,
Subash.

REPORT ZCUSTOMC.
CLASS event_handler DEFINITION.
PUBLIC SECTION.
    METHODS: handle_f1 FOR EVENT f1 OF cl_gui_textedit
             IMPORTING sender,
             handle_f4 FOR EVENT f4 OF cl_gui_textedit
             IMPORTING sender.
ENDCLASS.
DATA: ok_code LIKE sy-ucomm,
      save_ok LIKE sy-ucomm.
DATA: init,
      container TYPE REF TO cl_gui_custom_container,
      editor    TYPE REF TO cl_gui_textedit.
DATA: event_tab TYPE cntl_simple_events,
      event     TYPE cntl_simple_event.
DATA: line(256) TYPE c,
      text_tab LIKE STANDARD TABLE OF line,
      field LIKE line.
DATA handle TYPE REF TO event_handler.
START-OF-SELECTION.
line = 'First line in TextEditControl'.
APPEND line TO text_tab.
line = '----
APPEND line TO text_tab.
line = '...'.
APPEND line TO text_tab.
CALL SCREEN 100.
MODULE status_0100 OUTPUT.
SET PF-STATUS 'SCREEN_100'.
IF init is initial.
    init = 'X'.
    CREATE OBJECT: container EXPORTING container_name = 'TEXTEDIT',
                   editor    EXPORTING parent = container,
                   handle.
    event-eventid = cl_gui_textedit=>event_f1.
    event-appl_event = ' '.                     "system event
    APPEND event TO event_tab.
    event-eventid = cl_gui_textedit=>event_f4.
    event-appl_event = 'X'.                     "application event
    APPEND event TO event_tab.
    CALL METHOD: editor->set_registered_events
                 EXPORTING events = event_tab.
    SET HANDLER handle->handle_f1
                handle->handle_f4 FOR editor.
ENDIF.
CALL METHOD editor->set_text_as_stream EXPORTING text = text_tab.
ENDMODULE.
MODULE cancel INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE user_command_0100 INPUT.
save_ok = ok_code.
CLEAR ok_code.
CASE save_ok.
    WHEN 'INSERT'.
      CALL METHOD editor->get_text_as_stream IMPORTING text = text_tab.
    WHEN 'F1'.
      MESSAGE i888(sabapdocu) WITH text-001.
    WHEN OTHERS.
      MESSAGE i888(sabapdocu) WITH text-002.
      CALL METHOD cl_gui_cfw=>dispatch.      "for application events
      MESSAGE i888(sabapdocu) WITH text-003.
ENDCASE.
SET SCREEN 100.
ENDMODULE.
CLASS event_handler IMPLEMENTATION.
METHOD handle_f1.
    DATA row TYPE i.
    MESSAGE i888(sabapdocu) WITH text-004.
    CALL METHOD sender->get_selection_pos
         IMPORTING from_line = row.
    CALL METHOD sender->get_line_text
         EXPORTING line_number = row
         IMPORTING text = field.
    CALL METHOD cl_gui_cfw=>set_new_ok_code   "raise PAI for
         EXPORTING new_code = 'F1'.           "system events
    CALL METHOD cl_gui_cfw=>flush.
ENDMETHOD.
METHOD handle_f4.
    DATA row TYPE i.
    MESSAGE i888(sabapdocu) WITH text-005.
    CALL METHOD sender->get_selection_pos
         IMPORTING from_line = row.
    CALL METHOD sender->get_line_text
         EXPORTING line_number = row
         IMPORTING text = field.
    CALL METHOD cl_gui_cfw=>flush.
ENDMETHOD.
ENDCLASS.
aniruddh

How to save Custom control records module pool program ?

Hi guru ,
1. How to save Custom control records module pool program ?
I wrote multiple lines of record in custom control
Who to save that records ?
thanking you.
Regards,
Subash.

Hi Subasha,
Please check the format below since it is based on a working code
**************data declarations
TYPES: BEGIN OF TY_EDITOR,
EDIT(254) TYPE C,
END OF TY_EDITOR.
data: int_line type table of tline with header line.
data: gw_thead like thead.
data: int_table type standard table of ty_editor.
You should create a text for uniquely identifying the text you are saving each time so that it doesn't get overwritten
For this a key combination must be decidedd to uniquely identify the test..here it is loc_nam
****************fill header..from SO10( t-code )
GW_THEAD-TDNAME = loc_nam. " unique key for the text
GW_THEAD-TDID = 'ST'. " Text ID
GW_THEAD-TDSPRAS = SY-LANGU.
GW_THEAD-TDOBJECT = 'ZXXX'. "name of the text object created
*Read Container and get data to int_table
CALL METHOD EDITOR ->GET_TEXT_AS_R3TABLE
IMPORTING
TABLE = int_table
EXCEPTIONS
ERROR_DP = 1
ERROR_CNTL_CALL_METHOD = 2
ERROR_DP_CREATE = 3
POTENTIAL_DATA_LOSS = 4
others = 5.
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
loop data from int_table and save to int_line-tdline appending it.
*save the text
CALL FUNCTION 'SAVE_TEXT'
EXPORTING
HEADER = GW_THEAD
TABLES
LINES = InT_LINE
EXCEPTIONS
ID = 1
LANGUAGE = 2
NAME = 3
OBJECT = 4
OTHERS = 5.
IF SY-SUBRC 0.
ENDIF.
The code shown above is ok and working fine for save also,hope that the above sample with helps you solve the problem
Please check and revert,
Reward if helpful
Regards
Byju

Adobe CQ5.5 Digital Asset - Delete default metadata and how to create custom metadata

Hi
I am trying to create custom metadata for all format of assets (PDF, DOC, TXT, etc.,). I have created the dam folder under apps node as below:-
Step 1: /apps/dam/content/asseteditors/formitems
Step 2: Included the four property as textfield and selection according to our requirement under formitems
Step 3: I changed the cq:allowedTemplates from /content/dam/jcr:content
Step 4: I tried to upload the asset, I could get the custom metadata for Txt, Doc, PPT, XLSX
Step 5: But for JPG, PNG and PDF I am getting the default metadata which is huge list.
How to control this one? I want my custom metadata only displayed for creation assets. Find the attached.
CRX - Custom Template Configured
CRX - Custom Metadata populated for ZIP format
CRX - Custom Metadata not populated for PDF format

Hi,
If you read the description under section http://dev.day.com/docs/en/cq/current/dam/how_to_edit_metadata.html#Creating New Metadata Property for Assets you will find yout the format for images and its different format stores at different location. So to deal with image metadata plz try below
1. Create a "image" node under "/apps/dam/content/asseteditors" as sling folder and configure it similar to "/apps/dam/content/asseteditors"
2. under this folder again copy paste the "/libs/dam/content/asseteditors/formitems" and customize it accordingly
Above will help you to manage with all types of images. Now if you want to have separate group of property for different image types then similar to above you have to create format node inside image folder for example jpg file type create a node with name "jpeg" under "image" node & configure similarly as you did for image.
I hope it will help you to proceed. Please let me know for more information.
Thanks,
Pawan

How To Set Custom Metadata Programmatically?

I could have sworn there was a way, but I sure can't figure it out right now - anybody know if or how?
PS - I thought at first catalog:setPropertyForPlugin would do it, but it seems to just set some invisible property, not the viewable, filterable, custom metadata kind.
Thanks,
Rob

To build on John's reply, double-check that the metadata definition declares the field browsable and searchable, e.g.
    metadataFieldsForPhotos = {
        {id = 'type',
         title = "Type",
         dataType = 'string',
         browsable = true,
         searchable = true},

How to rename Custom Metadata Field?

I have some pics with custom metadata field "gadget brand", i with to rename the field name to "brand", how can i do that? I tried to rename in the custom metadata manager, but it doesn't apply the change.

Don't believe you it will allow you to rename it.
You're going to have to create a new field with the name you want and copy the data over. Unfortunately Aperture doesn't have any built in means of copying metadata from one field to another. Applescript however could do it fairly easily.

How to export custom metadata fields

How do I export custom metadata fields (or even the DATE) to a text or spreadsheet? Why does Aperture have dozens of metadata choices, but only allows a few to be exported?

You can try Automator which must be installed already in your computer. Create a new workflow, on the left pane select Aperture to see a list of actions, select "get selected items" and "extract metadata", and drag both to the right most pane. there you'll choose the Tag names to extract from the images already selected inside aperture and choose an output method, tabbed text should work fine for a spreadsheet. Hope it works.

How to control custom button display or hide in toolbar

I had been added four buttons in Acrobat Tool bar.
Now I find a function AVToolButtonSetComputeEnabledProc in SDK that this function only control the button enable or disenable.
Now I want to control the custom button display or hide, how can I to do?
Does this SDK have a API to achieve my need?

As of Acrobat X, we no longer support dynamic hiding/showing – only enable/disable.

How to save custom settings

I was wondering if anyone knows of a software that allows you to save custom quicktime export settings so that one can easily go back and compress videos from pre-selected settings opposed to just using the 'use recent settings' option.
I know of rooVid but it does not work for leopard.
Please advise thanks.

I was wondering if anyone knows of a software that allows you to save custom quicktime export settings so that one can easily go back and compress videos from pre-selected settings opposed to just using the 'use recent settings' option.
MPEG Streamclip (free) will allow you to save named "Presets" which can be recalled/loaded as needed when using Streamclip to perform the various exports via the QT/QT component structure embedded in the current OS. (I.e., the created file is not for use by QT Pro itself.)

[CS3 JS] How To Access Custom Metadata?

I have InCopy documents that contain custom XMP metadata in two namespaces, Dublin Core and PRISM, e.g.: ... <rdf:Description rdf:about=""> <dc:format xmlns:dc="http://purl.org/dc/elements/1.1/">application/x-incopy</dc:format> <dc:title>Chickens and You</dc:title> </rdf:Description> <rdf:Description rdf:about=""> <prism:publicationName xmlns:prism="http://prismstandard.org/namespaces/basic/1.2/" >Poultry Daily</prism:publicationName> </rdf:Description> ... In my JavaScript, I can access the Dublin core values but cannot access the PRISM values and I'm not sure why not. For example, I have this: doc = app.activeDocument; metadata = doc.metadataPreferences; namespaces["dc"] = "http://purl.org/dc/elements/1.1/"; namespaces["prism"] = "http://prismstandard.org/namespaces/basic/1.2/"; $.writeln("dc:title=" + metadata.getProperty(namespaces["dc"], "title/*[1]")) // Returns expected result "Chickens and You" $.writeln("prism:publicationName=" + metadata.getProperty(namespaces["prism"], "publicationName/*[1]")) // Returns unexpected empty result, should be "Poultry Daily". If I do metadata.save() I see the PRISM metadata in the saved result: <rdf:Description rdf:about="" xmlns:prism="http://prismstandard.org/namespaces/basic/1.2/"> <prism:publicationName>Poultry Daily</prism:publicationName> </rdf:Description> So I'm sort of at a loss but I suspect that I don't really understand what the path value should be--I haven't been able to find any clear documentation on what the path is addressing or how its actually interpreted. What am I missing or doing wrong? Thanks, Eliot

[email protected] wrote:
> Dude, I started that thread :-)
Missed that. It's been a long week.
The problem is this line (probably).
metadata.getProperty(namespaces["prism"], "publicationName/*[1]")
You apparently copied the syntax from dc:title in the previous line. dc:title is
an 'Lang Alt' kind of property which is, effectively, an array. Your
prism:publicationName is a simple value property. I suspect that the "[1]"
syntax (and possible the "/*" before it) are what's causing problems.
I don't recall seeing docs for this either.
-X

Flash CS5.5[Publish Settings]: How to include custom Metadata tags in swf?

In Flash CS5, the 'Publish Settings' for the fla had an 'Export SWC' checkbox that took care of that.
The option is missing. Why was it removed and how can that be done in 5.5?

Thanks sinious, but, it doesn't work.
Let me elaborate on what I want to do:
I'm trying to create a swf in Flash CS5.5, that's using a flex library (swc) that relies on Metadata tags (anotations).
I need to use the metadata tags in my as3 code (in the fla), and They need to be compiled into the swf (by Flash CS5.5 compiler...).
Although, when I load that swf, the metadata tags aren't compiled into it (I'm using describeType to check if tags are available in the swf).
In flex, I would use the '-kepp-as3-metadata+=' compiler setting to do that, in Flash CS4 & CS5 I used the 'Export SWC' in the publish settings, but that's removed (WHY???).
Checking XMP Metadata didn't change that, the tags are still not included in the compiled swf.
Anyone?

How to save custom Producer Kits?

Hello.
I've been trying to save a complete custom mixed/edited producer kit with no succes.
There's an article how to load, edit and save the patches, but I haven't been able to make the custom saved producer kits to appear in the library or even in the finder. The saved instrument appears on the Library image window, but not in the library. Has anyone succeeded with saving pre-mixed multichannel drum kits?
I would like to use this in other songs too...

Thanks Art, CCTM and KC
Oh how I wish to say these advices resolved the problem - but no...
I followed through these steps:
In the Finder, choose Go to Folder from the Go menu.
Type ~/Library/Preferences in the "Go to the folder" field.
Press the Go button.
Remove the com.apple.logic10.plist file from the Preferences folder. Note that if you have programmed any custom key commands, this will reset them to the defaults. You may wish to export your custom key command as a preset before performing this step. See the Logic Pro X User Manual for details on how to do this. If you are having trouble with a control surface in Logic Pro X, then you may also wish to delete the com.apple.logic.pro.cs file from the preferences folder.
If you have upgraded from an earlier version of Logic Pro, you should also remove~/Library/Preferences/Logic/com.apple.logic.pro.
Restart the computer.
I found the plist files from the ~/Library/Preferences folder and deleted them
I also deleted
Then restarted - no cure
Then I did the same but deleted all files including "logic" from the Preferences. Then checked out all the User accounts of this computer with the same procedure. I deleted also the Mainstage PLISTS just to make sure.
Then I emptied the Trash and restarted - but no cure
Then I did that all again and deleted the Logic Pro X app - restarted and reinstalled it.
That didn't help either.
I also tried to save different PATCHes using SAVE on the Library low-right corner.
I wasn't sure where to save them, but the Labrary didn't create any User Folder or those custom patches.
Not even after using refresh library...
What about Garageband, Final Cut Pro or some other app - could they cause this?
What do you think? Do I have to start from a scratch to build up the system installing every app one by one again to make this work? That would be **** of a job...
I'm beginning to feel like a kid complaining about something and nothing seems to help.
Thanks for your patience and all the advice you've given.
If you have any other ideas- keep them coming

How to "save" custom objects in keynote

I've created custom art / objects in keynote that I'd like to reuse and quickly insert into presentations. Is there a way to "store" or "save" the custom artwork in my version of keynote for quick recall?

Hi, Offline edition doesnt support custom objects or any other object that is not available as part of the default offline solution. Hope it helps
-- Venky CRMIT

How to save custom metadata display in CS4.2?

Similar Messages

Maybe you are looking for