How to save customised fields in standard table MARA by using MM17

I have customised fields in MARA table. I want to save the data in database by using Mass transaction MM17. Can any one can give the solution.

Hi,
   use BADI's for adding the fileds in MM17 and write the code so that they will be saved in the MARA table.
Regards
Thabitha.

Similar Messages

  • Adding a field to Standard table through Structure

    Hi everybody,
    I need to add a field to standard table, I am using one append structure in that i am adding my field , But whenever I am activating the structure, I am not able to activate, It is getting as "PARTLY/ACTIVE" status for structure, so please help me in activating the structure.
    ThankZ
    siddivinesh.

    go to the standard table it ll also be partially active
    goto se14
    give the std table name
    adjust and activate...
    if the problem is not solved.......
    see if the field is repeating twice in that Std table.....
    if so delete the repeating fields....

  • How to add new customise field in standard SAP ME28 Report?

    Hi Anybody,
             How to add new customise field inside Standard SAP Screen report ME28?.
    Anybody, Please tell me how to do?.
    Thanks,
    Regards,
    S.Muthu.

    Hi Subramaniyam,
    You can find enhancement in me28 by following steps and then apply your logic in include of this enhancement.
    cmod>Give a project name>in enhancement column give the package name ME >f4>in package write ME-->ENTER>It will show you all enhancements available in me28> find which ever suits your requirement>save > click on components> from there you can make changes in include program.to add that particular field.

  • How to search records in a standard table with * ?

    Hi everyone,
    Can anyone tell me how to search records in a standard table with * ?
    That is, in screen if user type * abc * for searching the records in which the field MC_STEXT contains 'abc'. What the code should be? How to complete the code below?
      SELECT SINGLE objid FROM p1000  INTO p1000-objid,
      WHERE MC_STEXT = ? .
    Thanks!

    Hi
    There are several way to do that, probably just as some guys wrote the easier way is to use LIKE in WHERE condition and the sign % instead of *:
    V_STRING = '%ABC%'.
    SELECT SINGLE objid FROM p1000 INTO p1000-objid,
    WHERE MC_STEXT LIKE V_STRING.
    U can also use a range (just like select-options):
    RANGES: R_MC FOR P1000-MC_STEXT.
    R_MC-LOW = 'ABC'.
    R_MC(3) = 'ICP'.
    APPEND R_MC.
    SELECT SINGLE objid FROM p1000 INTO p1000-objid,
    WHERE MC_STEXT IN R_MC.
    Max

  • Adding Field in standard Table control in crmd_order (standard order)

    Hello All,
            I want to add a Field in standard table control in Crmd_order - standard order general tab. Please Let me know it is Possible to add, if Possible Let me know how to achieve this Functionality.
    Thanks,
    Feroz.

    hi,
    If you don't want to access key...then only option is ,you have to search USER Exit or BADi (Try using BADI ME_GUI_PO_CUST) for me22n transaction......to adding the field.
    Regards
    Gaurav

  • Regarding adding a Custom field to Standard Table

    Hi ABAPers,
    Can any one explain the below spec-description.
    "The purpose of this design is to provide the foundation for a more automated solution to the invoice reconciliation process.  This design calls for adding a custom field to the standard SAP table EINE as well as a data maintenance tool for the same.  There will also be a new custom table for storing values associated with the new EINE field.  These new tables will also provide users with the ability to determine which PIR are soon to expire."
    We have to add one custom field to standard table EINE, how we can add this custom field to STND table.
    According to me we can add it through append structure. is it correct or not.
    and what is data maintenance tool.
    Pls.............Explain in details.
    Thanks in advance.
    Regards,
    Ramana Prasad. T

    Hi,
    Goto SE11 ,give ur table name.Then press display button.Then in the application tool bar press on append structure ...Now create a zstructure and add ur custom field and then activate the table.
    Regards,
    nagaraj

  • How to save the instance in standard lead from custom business object

    Hi Experts,
              I am unable to save the instance(Record) in standard Lead business object from custom business object.
    Steps:
    created one custom business object with mandatory fields for creating instance in standard lead.
    in quick create screen i bind  data elements to standard lead business object elements.
    issue:
    when i click on preview i am getting exception as Arguments not found
    can you please tell me that How to save the instance in standard lead from custom business object with step by step .

    Hi Vijay,
    Please refer this link under that mentioned that how to create lead using ABSL code
    Web 2 Lead in SAP Cloud for Customer, step by step - Part 1 - myCloudDoor myCloudDoor
    Under the "Action-CreateLead.absl" mentioned how to create lead
    the above link for convert web 2 lead functionality and under they create lead using web data from ABSL code.
    Regards,
    Mithun

  • How to pick the fields of ABC table in Payslip

    How to pick the fields of ABC table in Payslip, So i want to add the calender days(absent days) in my payslip

    You can do it through PE51_CHECKTAB
    Yogesh

  • How to add additional field into output table for RFIDYYWT(Generic Withholding Tax Reporting)

    Hi Experts,
    How to add additional field into output table VENDORS/WH TAX TYPES AND CODES in RFIDYYWT(Generic Withholding Tax Reporting).
    I have no idea how to start with, please give some advice.
    Thanks!
    Ice

    Dear Ice,
    Use Append structure, see given link:
    https://help.sap.com/saphelp_nw04s/helpdata/en/cf/21eb61446011d189700000e8322d00/content.htm
    Regards,
    Abbas.

  • How to update the field ZLSPR of table BSEG

    HI Friends,
    Can anyone tell me how to update the field ZLSPR of table BSEG? I've a 700 line abap program and I should include some logic in this program to make an entry into BSEG-ZLSPR. Is there any FM/BAPI available? Is BDC a healthy approach?. My team lead do not want me to use UPDATE statement....please help.
    Thanks in advans,
    Varsha.

    Hi,
    Hi ,
    You will need to group that radiobuttons so that SAP knows they are linked together. To do this using the grahical layout editor simply select all the radiobuttons and then right click on them, Now choose define group. Once you have done this you should not need any of the "clear" or "='X'" statements SAP should control it all for you.
    hope this helps
    Reward if found helpfull...
    Venkoji Babu.

  • How  to set some fields of a table, not fields form ..

    Hi,
    I have a form based on a table with a few fields and others fields on the same table whose don't appear in the form.
    I want to set the others fields of this table and i use the following code (ex) :
    p_session.set_value(
    p_block_name => 'DEFAULT',
    p_attribute_name => '_REMARQUSER',
    p_value => PORTAL.WWCTX_API.GET_USER );
    I had put this code in the advanced plsql section but it DOES NOT WORK.
    after form :
    Erreur interne (WWC-00006)
    Une erreur inattendue s'est produite : ORA-06502: PL/SQL : erreur numérique ou erreur sur une valeur (WWV-16016)
    Une erreur inattendue s'est produite : ORA-06502: PL/SQL : erreur numérique ou erreur sur une valeur (WWV-16016)
    (WWV-00000)
    ORA-01007: la variable n'est pas dans la liste SELECT (WWV-11230)
    Le chemin de la préférence n'existe pas : ORACLE.WEBVIEW.PARAMETERS.3137_LRCWEB_REMARQUES_571188203 (WWC-51000)
    before processing :
    Erreur interne (WWC-00006)
    Une erreur inattendue s'est produite : ORA-06502: PL/SQL : erreur numérique ou erreur sur une valeur (WWV-16016)
    (WWV-00000)
    after processing :
    Erreur interne (WWC-00006)
    Une erreur inattendue s'est produite : ORA-06502: PL/SQL : erreur numérique ou erreur sur une valeur (WWV-16016)
    (WWV-00000)
    I would appreciate any help on the problem.
    Thanks, Pat

    Did you try modifying the package body?
    I tried this code in my package body and it worked fine

  • How to deactivate the fields in a table control of a standard screen

    Hi,
       I have an requirement to deactivate the fields in a table control of a standard screen in ME22n transaction.I am using a BADI "ME_PROCESS_PO" and in item mathod i am looping at screen for the screen field name in the table control.But it is not working. Can anyone give me the possible solution . Thanx in advance.
    With Regards,
    Ajit.

    >
    Vivek Joshi wrote:
    > Hello Router ,
    >                      I do not want to set the focus , I want to get focus . User can click on any cell in the table and then press a button in the toolbar . Now in the event handler of the button i want to under which column User has set the focus .
    > I hope , I am clear now .
    > Thanks for your help
    > Regards
    > Vivek
    An yet you keep getting suggestions of how to set the focus.   I looked through the API documentation and I don't see anything that would suggest you can request to see where the current focus is.  Perhaps someone might still come along with a solution, but my hopes wouldn't be too high at this point.  I can pass the requirement onto Product Definition, as the use case does seem interesting.  Perhaps it is something we have even considered in the past. 
    But for now, there might be a better way to solve your problem.  It will probably mean redesign the interaction.  What exactly are your requirements?  Do you need to be able to get the data in a particular cell of table when a button is clicked?  Just throwing out some ideas here, but maybe just use the lead selection to select the row, but then have a button choice to choose the action associated with the column you want. A hack for sure - but it might work.  Also it doesn't help you right now, but in the near future update to NetWeaver 7.0, WDA does have a onColSelect event for the table.

  • How to update/copy into the fields of standard table

    Hi all,
    I have a piece of code in user exit, in which i have to populate the field atwrt (cntry of origin) in EIPO-HERKL in a delivery document..
    but if i assign it directly to the field as i've shown in code, it wont take it.
    moreover, it looks be a standard table(EIPO), but it is not.. its  a work area..
    READ TABLE i_val_tab WITH KEY atnam = c_cntr.
    IF sy-subrc = 0.
    EIPO-HERKL = i_val_tab-atwrt.
    MODIFY EIPO.
    ENDIF.
    so kindly guide me how to do dat..do i have to populate it in some other standard table(for country of origin field) which will automatically put the field in EIPO-HERKL?

    Hello Pradeep,
                          Generally, in most of the User Exits, we'll find something called X and Y Structures. For example, XVBAK and YVBAK where the X Structure contains the Old Value and the Y Structure contains the New Value (meaning, the Value that is currently on the Screen before Saving). So, try to find out similar structures through which you can update the Value in the Standard Table.
    Thanks and Regards,
    Venkat Phani Prasad Konduri

  • How to add new fields  to a table control in a standard transaction JHA3X

    Hi All,
            We have a requirement where we have to add two new fields  to  a table control
            in a standard transaction JHA3X .
           We don't want any changes into our standard code and also we don't have any USER EXIT for that
           screen.
           Please provide with some solutions for the same .
           Thanks in advance .

    You will need add this to the /var/clientlibs/libs/cq/security/widgets.js and add the field under the 'CQ.security.UserProperties'.  For example, if you wanted to add a field to show the 'Middle Name' under the 'First Name' field, you can try adding the following:
                "items":[{
                        "xtype":"textfield",
                        "fieldLabel":CQ.I18n.getMessage("Login"),
                        "anchor":"100%",
                        "disabled":true,
                        "allowBlank":false,
                        "name":"rep:userId"
                        "xtype":"textfield",
                        "fieldLabel":CQ.I18n.getMessage("First Name"),
                        "anchor":"100%",
                        "name":"givenName"
                        "xtype":"textfield",
                        "fieldLabel":CQ.I18n.getMessage("Middle Name"),
                        "anchor":"100%",
                        "name":"middleName",
                        "xtype":"textfield",
                        "fieldLabel":CQ.I18n.getMessage("Last Name"),
                        "anchor":"100%",
                        "name":"familyName",
                        "allowBlank":false
    Hope this helps.
    -Ron

  • Aditional field in standard table and screen

    Hi friends.
    I'd like to know how to add a new field in a table and make it visible in standard transaction.
    In this case, the table is EBAN and transaction is ME51N, ME52N and ME53N. This new field must be includded in transaction items grid.
    I've already added field to CI... include in EBAN but this new field does't appear in standard transaction.
    I've already saw variant and this new field doesn't appear there too.
    Any idea ? Any SAP Note (I hadn't find any sap note yet) ?
    thanks.
    Glauco

    Hi Raymond Giuseppi.
    Greate hint about this SAP NOTE. It solved my issue !!!
    P.S.: This note is to releases 46c and 47, BUT even I'm in release ECC 6.0 I must do the same: I've already created CMOD prject, includes and subscreen 0111 like SAP NOTE ask to do. This SAP NOTE has entire example on how to add this subscreen and encoding includes of TOP, PBO and PAI to read and save data of Zfields of EBAN. It's nice and easy to understand.
    thank you !!!
    Glauco
    Edited by: Glauco Kubrusly on Nov 22, 2010 11:53 AM

Maybe you are looking for