How to save customized skin (via Intel graphics) from session to session

Hi-I'm a novice so hopefully there's an easy resolution. I've customized the Firefox theme using Intel HD graphics "color enhancement." Even though the coloring setting are saved via the Intel card, when I start a new Firefox session the theme reverts to the original shadings. I can change back to my customized theme by opening the Intel Control Center but I'd like to avoid that step.
Is there a way to keep my settings as default without fiddling with css editing which I'm too stupid to do? Thanks for any thoughts

Thanks for responding! It's a trivial issue but with OCD I can spend hour after hour trying to get things as I want them.
I found Flaminglow as a theme that was a bit unique. But I wanted the saturation, contrast, etc. altered, which I did with Intel graphics program that was pre-installed. I can save the color enhancement i.e. "a" scheme, "b", etc. with Intel. But when I restart the pc it reverts to the default colors of Flaminglow and I have to go to the Intel program and enter the saved scheme. I don't want to have to do that each time I turn the PC on. I've included a screenshot of the homepage and one of the Intel control center.
I thought that perhaps a session saving add on may work but just don't know. Make any sense, lol? Thanks

Similar Messages

  • How to develop custom skin in JDeveloper 11g?

    Hi All
    I am using JDeveloper 11g(11.1.1.3.0). Could anyone please tell me how to create custom skins.
    Regards
    Venkat.S

    Thank you very much Navaneeth.. now I am able to create custom skin.
    Now one more help, currently I am using "fusion" as default skin how to extend it with our custom skin. So that i can use few features of "Fusion" skin and few from my custom skin.
    If I disable inputtext it will be in "Grey color" i need it in white color. how to do it?

  • How to save Custom control records through module pool program ?

    Hi guru ,
    1. How to save Custom control records through module pool program ?
    I wrote multiple lines of record in custom control
    Who to save that records ?
    thanking you.
    Regards,
    Subash.

    Hi,
    can refer following code -
    IN PAI , CODE is as follows-
    *&      Form  editor_output
    FORM editor_output .
    NARRATION1 is name of custom controller
      IF v_editor IS INITIAL.
      Create obejct for custom container
        CREATE OBJECT v_custom_container
          EXPORTING
            container_name              = 'NARRATION1'
          EXCEPTIONS
            cntl_error                  = 1
            cntl_system_error           = 2
            create_error                = 3
            lifetime_error              = 4
            lifetime_dynpro_dynpro_link = 5
            OTHERS                      = 6.
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE 'I' NUMBER sy-msgno
                     WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
      Create obejct for the TextEditor control
        CREATE OBJECT v_editor
          EXPORTING
            wordwrap_mode              = cl_gui_textedit=>wordwrap_at_fixed_position
            wordwrap_position          = line_length
            wordwrap_to_linebreak_mode = cl_gui_textedit=>true
            parent                     = v_custom_container
          EXCEPTIONS
            error_cntl_create          = 1
            error_cntl_init            = 2
            error_cntl_link            = 3
            error_dp_create            = 4
            gui_type_not_supported     = 5
            OTHERS                     = 6.
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE 'I' NUMBER sy-msgno
                     WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
      ENDIF.
    ENDFORM.                    " editor_output
    getting textdata in internal table as follows
    *&      Form  create_text
    FORM create_text .
      REFRESH : it_texttable,
                it_text.
      IF v_doc_number IS NOT INITIAL.
        IF v_editor IS NOT INITIAL.
          CALL METHOD v_editor->get_text_as_r3table
            IMPORTING
              table                  = it_texttable
            EXCEPTIONS
              error_dp               = 1
              error_cntl_call_method = 2
              error_dp_create        = 3
              potential_data_loss    = 4
              OTHERS                 = 5.
          IF sy-subrc <> 0.
            MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                       WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
          ENDIF.
    Now, our final text data is in internal table it_texttable.
    pls, Reward if found helpful.

  • How to save Custom control records ?

    Hi guru ,
    1. How to save Custom control records module pool program ?
    I wrote multiple lines of record in custom control
    Who to save that records ?
    thanking you.
    Regards,
    Subash.

    REPORT  ZCUSTOMC.
    CLASS event_handler DEFINITION.
      PUBLIC SECTION.
        METHODS: handle_f1 FOR EVENT f1 OF cl_gui_textedit
                 IMPORTING sender,
                 handle_f4 FOR EVENT f4 OF cl_gui_textedit
                 IMPORTING sender.
    ENDCLASS.
    DATA: ok_code LIKE sy-ucomm,
          save_ok LIKE sy-ucomm.
    DATA: init,
          container TYPE REF TO cl_gui_custom_container,
          editor    TYPE REF TO cl_gui_textedit.
    DATA: event_tab TYPE cntl_simple_events,
          event     TYPE cntl_simple_event.
    DATA: line(256) TYPE c,
          text_tab LIKE STANDARD TABLE OF line,
          field LIKE line.
    DATA handle TYPE REF TO event_handler.
    START-OF-SELECTION.
      line = 'First line in TextEditControl'.
      APPEND line TO text_tab.
      line = '----
      APPEND line TO text_tab.
      line = '...'.
      APPEND line TO text_tab.
      CALL SCREEN 100.
    MODULE status_0100 OUTPUT.
      SET PF-STATUS 'SCREEN_100'.
      IF init is initial.
        init = 'X'.
        CREATE OBJECT: container EXPORTING container_name = 'TEXTEDIT',
                       editor    EXPORTING parent = container,
                       handle.
        event-eventid = cl_gui_textedit=>event_f1.
        event-appl_event = ' '.                     "system event
        APPEND event TO event_tab.
        event-eventid = cl_gui_textedit=>event_f4.
        event-appl_event = 'X'.                     "application event
        APPEND event TO event_tab.
        CALL METHOD: editor->set_registered_events
                     EXPORTING events = event_tab.
        SET HANDLER handle->handle_f1
                    handle->handle_f4 FOR editor.
      ENDIF.
      CALL METHOD editor->set_text_as_stream EXPORTING text = text_tab.
    ENDMODULE.
    MODULE cancel INPUT.
      LEAVE PROGRAM.
    ENDMODULE.
    MODULE user_command_0100 INPUT.
      save_ok = ok_code.
      CLEAR ok_code.
      CASE save_ok.
        WHEN 'INSERT'.
          CALL METHOD editor->get_text_as_stream IMPORTING text = text_tab.
        WHEN 'F1'.
          MESSAGE i888(sabapdocu) WITH text-001.
        WHEN OTHERS.
          MESSAGE i888(sabapdocu) WITH text-002.
          CALL METHOD cl_gui_cfw=>dispatch.      "for application events
          MESSAGE i888(sabapdocu) WITH text-003.
      ENDCASE.
      SET SCREEN 100.
    ENDMODULE.
    CLASS event_handler IMPLEMENTATION.
      METHOD handle_f1.
        DATA row TYPE i.
        MESSAGE i888(sabapdocu) WITH text-004.
        CALL METHOD sender->get_selection_pos
             IMPORTING from_line = row.
        CALL METHOD sender->get_line_text
             EXPORTING line_number = row
             IMPORTING text = field.
        CALL METHOD cl_gui_cfw=>set_new_ok_code   "raise PAI for
             EXPORTING new_code = 'F1'.           "system events
        CALL METHOD cl_gui_cfw=>flush.
      ENDMETHOD.
      METHOD handle_f4.
        DATA row TYPE i.
        MESSAGE i888(sabapdocu) WITH text-005.
        CALL METHOD sender->get_selection_pos
             IMPORTING from_line = row.
        CALL METHOD sender->get_line_text
             EXPORTING line_number = row
             IMPORTING text = field.
        CALL METHOD cl_gui_cfw=>flush.
      ENDMETHOD.
    ENDCLASS.
    aniruddh

  • How to save the instance in standard lead from custom business object

    Hi Experts,
              I am unable to save the instance(Record) in standard Lead business object from custom business object.
    Steps:
    created one custom business object with mandatory fields for creating instance in standard lead.
    in quick create screen i bind  data elements to standard lead business object elements.
    issue:
    when i click on preview i am getting exception as Arguments not found
    can you please tell me that How to save the instance in standard lead from custom business object with step by step .

    Hi Vijay,
    Please refer this link under that mentioned that how to create lead using ABSL code
    Web 2 Lead in SAP Cloud for Customer, step by step - Part 1 - myCloudDoor myCloudDoor
    Under the "Action-CreateLead.absl" mentioned how to create lead
    the above link for convert web 2 lead functionality and under they create lead using web data from ABSL code.
    Regards,
    Mithun

  • How to save Custom control records module pool program ?

    Hi guru ,
    1. How to save Custom control records module pool program ?
    I wrote multiple lines of record in custom control
    Who to save that records ?
    thanking you.
    Regards,
    Subash.

    Hi Subasha,
    Please check the format below since it is based on a working code
    **************data declarations
    TYPES: BEGIN OF TY_EDITOR,
    EDIT(254) TYPE C,
    END OF TY_EDITOR.
    data: int_line type table of tline with header line.
    data: gw_thead like thead.
    data: int_table type standard table of ty_editor.
    You should create a text for uniquely identifying the text you are saving each time so that it doesn't get overwritten
    For this a key combination must be decidedd to uniquely identify the test..here it is loc_nam
    ****************fill header..from SO10( t-code )
    GW_THEAD-TDNAME = loc_nam. " unique key for the text
    GW_THEAD-TDID = 'ST'. " Text ID
    GW_THEAD-TDSPRAS = SY-LANGU.
    GW_THEAD-TDOBJECT = 'ZXXX'. "name of the text object created
    *Read Container and get data to int_table
    CALL METHOD EDITOR ->GET_TEXT_AS_R3TABLE
    IMPORTING
    TABLE = int_table
    EXCEPTIONS
    ERROR_DP = 1
    ERROR_CNTL_CALL_METHOD = 2
    ERROR_DP_CREATE = 3
    POTENTIAL_DATA_LOSS = 4
    others = 5.
    IF SY-SUBRC 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    loop data from int_table and save to int_line-tdline appending it.
    *save the text
    CALL FUNCTION 'SAVE_TEXT'
    EXPORTING
    HEADER = GW_THEAD
    TABLES
    LINES = InT_LINE
    EXCEPTIONS
    ID = 1
    LANGUAGE = 2
    NAME = 3
    OBJECT = 4
    OTHERS = 5.
    IF SY-SUBRC 0.
    ENDIF.
    The code shown above is ok and working fine for save also,hope that the above sample with helps you solve the problem
    Please check and revert,
    Reward if helpful
    Regards
    Byju

  • I called Verizon prior to travelling abroad and asked to turn roaming on. As of today, 4 days later, I have no service. I do not have a landline to call. GlobalServices email does not work... Does anybody know how to reach customer support via email?

    I called Verizon prior to travelling abroad and asked to turn roaming on. As of today, 4 days later, I have no service. I do not have a landline to call support. GlobalServices email does not work... Does anybody know how to reach customer support via email?

        Hi Florence2014
    I'm so sorry your having issues. Unfortunately there isn't an email for global support. The only way way to reach them while traveling is to call them at 908-559-4899.
    JoeL_VZW
    Follow us on Twitter @VZWSupport

  • How to save my emails and adressbook files from an old ibook?

    How to save my emails and adressbook files from an old ibook (bought around 2002) ?
    The screen from the old ibook doesn´t work anymore (logicboard problem I guess).
    I saved everything else with starting it in target modus. That worked fine.
    I want to delete the files after that as well, because I wanna give away the old ibook and don´t want anyone to read my emails!
    Little helpers I have:
    A running MacBook
    External Screen (and cables to connect)
    Fire Wire Cable

    Don't know how helpful this will be but I often copy mail from one computer to another, I drag the mail from the mail window to the other computers drop box, then from the other computer double click it and mail asks me what I want to do with it, of course without a screen you'd need to use back to my mac.
    If you don't have back to my mac running, you could set up a second user account on the newer mac, import everything via target mode as suggested by c above, and then drag the mail to the first user account drop box.

  • How do i delete the Tuesday 9 graphic from ical invites?

    How do you delete the "Tuesday 9" graphic from iCal invites?  Everytime I send an invite from iCal it gets tagged with this Tuesday 9 graphic, which is supremely annoying and very misleading for those you're sending the invite to.  Yes, I understand the signficance of Tuesday 9, but I'm trying to get past the childishness of that and actually have a functional iCal experience!
    Thanks...

    This is in the Videos app ? If it is then you can hide it (you can't permanently delete any item from your purchase history) via your computer's iTunes, and it should' then show for redownloading : iTunes Store: Hiding and unhiding purchases
    You can also turn off the showing of videos that are in the cloud via Settings > iTunes & App Store > Videos 'off'

  • How to save SOME time machine Mac backups from the TM disk to other disk WITHOUT formatting the destination disk?

    Hi,
    How to save SOME time machine Mac backups from the TM disk to other disk WITHOUT formatting the destination disk?
    I have a Time Machine disk (A) including the backups of several different Macs (B, C, D & E) generated with an old Mac OS X 10.5.8 (iMac PowerPC) over the years.
    I have transferred the old Mac contents to a new Mac with OS X 10.8.3 using Migration Assitant. All OK.
    Now, I want to erase such TM disk A to use if for other purposes, but first, I would like to RECOVER the backups of some Macs inside it (D and E). Is that possible WITHOUT formatting the destination disk and selecting only some Macs from the TM disk and not the fulll TM disk? How?
    Thanks.

    Thanks for the reply. I do not think that is messy, anway. I simply used the same external disk as Time Machine disk for different Macs. And that worked OK all the time for years.
    The ExternalTimeMachineDisk contains the folder Backups.backupdb
    which contains the following folders (each one corresponding to the Time Machine backup made from each Mac):
    Mac1
    Mac2
    MacBook1
    MacBook2
    In relation to my message above, is it possible to select specific files, folders or full Mac backups from such Time Machine disk and save them to other disk? How?
    Thanks.

  • Save Custom Skin

    i have a custom skin made- how do i save it to the skin
    selections so i can connect it to the flv's?
    tks!!

    Hang on - I think I just stumbled across the solution. I wan't pressing Enter after typing in the hex code. That seems to be the trick ;>)

  • How to save custom settings

    I was wondering if anyone knows of a software that allows you to save custom quicktime export settings so that one can easily go back and compress videos from pre-selected settings opposed to just using the 'use recent settings' option.
    I know of rooVid but it does not work for leopard.
    Please advise thanks.

    I was wondering if anyone knows of a software that allows you to save custom quicktime export settings so that one can easily go back and compress videos from pre-selected settings opposed to just using the 'use recent settings' option.
    MPEG Streamclip (free) will allow you to save named "Presets" which can be recalled/loaded as needed when using Streamclip to perform the various exports via the QT/QT component structure embedded in the current OS. (I.e., the created file is not for use by QT Pro itself.)

  • How to implement custom skin in JavaFX 2.0?

    To implement custom skin, I extend TextFieldSkin (in com.sun.javafx.scene.control.skin.*) class, but I don't know which methods to overwrite, anyone can provide some sample codes? Thanks!

    Hi,
    You can implement Skin interface or extend SkinBase class. I made some controls on my blog http://jojorabbitjavafxblog.wordpress.com/ but i still have not updated code to build 40. In my opinion the easiest way is to make first skin for Button class for example add text and Rectangle.

  • How to save a subreport via Ras Sdk

    Hello,
    Does anybody knows how to save a subreport as a rpt file ?
    This is something we can do using the designer (ie Crystal 2008).
    With the Ras Sdk for BOXI3.1, we can save a report  using ReportClientDocument.saveAs().
    There is no SubReportClientDocumentBv.saveAs().
    Is there a mean to do it ?
    Is it possible with another SDK ?
    Can we automate Crystal to do it ?
    (There so many functions missing in the Ras Sdk...)
    Thanks and best regards
    Alain

    Not sure what SDK you are using but after installing SP0 you should have this function:
    CrystalDecisions.ReportAppServer.SubreportWrapper.SaveAs(string, ref object, int)

  • How to Import customized internal table to smartform from Print Program

    Hi Gurus,
    I want to Import customized internal table to smartform from print program, Can anybody tell me how it is possible.
    With regards,
    S.Saravanan

    There is no problem passing an internal table to a smarforms, smartforms have the same interface as a function module ([Defining the Form Interface|http://help.sap.com/saphelp_nw70/helpdata/en/1c/f40c5bddf311d3b574006094192fe3/frameset.htm] in [Smart Forms|http://help.sap.com/saphelp_nw70/helpdata/en/a5/de6838abce021ae10000009b38f842/frameset.htm]) so could you elaborate a little more on your requirement (is it a standard a custom forms, etc.)
    Regards,
    Raymond

Maybe you are looking for