How to save data in oracle9i in binary form and how to retrieve it

Hello,
Kindly tell me how can i save my data in binary form(UTF8) in oracle9i through developer6i Forms and how to retrieve it. Kindly tell me step by step procedure.
Regards,
Shahzaib

save my data in binary formCould you explain a little more? What excatly do you want to store? Something like a BLOB?

Similar Messages

I cannot save data typed into an Adobe form sent to me..??

I have been sent an Adobe Form that is a Tender Document that I need to complete. When I open the Document is states in the top left-hand corner the following...."Please fill out the following form. You cannot save data typed into this form.
Please print your completed form if you would like a copy for your records."

What does the creator of the file need to do to make the form fillable? OR is there a program Bob8527 can download to fill in the form and email?
Please advise.
Thanks

Date Formats in Oracle Applications Forms and Oracle Self Service

Can someone tell me what determines the Date format that appears on Oracle Applications Forms and Oracle Self Service ?
*1.* In Oracle HRMS,all dates i see on the Forms are of the Format "MM/DD/YYYY" but my NLS Parameters are not in this format .I'm giving the results for the NLS parameters below.I thought the date formats are determined by the NLS format.Is there something else that determines the date format appearing on Oracle Applications Forms ?
NLS_DATABASE_PARAMETERS
NLS_DATE_FORMAT     :DD-MON-RR
NLS_DATE_LANGUAGE     :AMERICAN
NLS_LANGUAGE     :AMERICAN
NLS_TERRITORY     :AMERICA
NLS_INSTANCE_PARAMETERS
NLS_DATE_FORMAT     :DD-MON-RR
NLS_DATE_LANGUAGE     :
NLS_LANGUAGE     :american
NLS_TERRITORY     :america
NLS_SESSION_PARAMETERS
NLS_DATE_FORMAT     :DD-MON-RR
NLS_DATE_LANGUAGE     :
NLS_LANGUAGE     :american
NLS_TERRITORY     :america
*2* What about the profile option : ICX_DATE_FORMAT_MASK ? Does it determine the Date Format for Self Service alone or does it impact the date format appearing on Oracle Applications Forms and the actual database also ?
*3* If I use a to_date function in ,say, a pl/sql function that i code for some custom requirements,what will be the output of the date format ? Does it take the format given in NLS paramaters or is it determined by anything else?
Thanks in advance...

Hi,
Thanks for your reply ,but I'm still confused ..
Here are the profile options I'm seeing for one of my instance :
ICX: Date format mask - 12/31/1999
ICX: Date language - American English
ICX: Language - American English
ICX: NLS Sort - BINARY
ICX: Territory - United States
ICX: Numeric characters - NULL
NLS parameters are given in my original email.
In Self Service applications(OAF) ,the date format is appearing in "mm/dd/yyyy" format but when i login to Forms based applications ,I see the date format as "dd-mon-yyyy".What determines this date format ?
How can i make the date format to always return one format everywhere ,be it Self Service (OAF) or Oracle Forms ?
I'm getting date format related errors for my code because of default date formats changing intermittently when i log into Self Service.I want to know if there is anyway to prevent this from happening?
Thanks in advance.

I just got a replacement for my broken iPad mini from asurion, and I backed it up. But the problem is, my broken iPad mini has iOS 7 and all my data is in iOS 7 form, and I want to transfer it to the new iPad mini. How would I do it?

I've just received the replacement today, and I restored it from a backup I made back in July when my old iPad didn't have iOS 7. And I've updated the new iPad to iOS 7, but I don't know how to transfer the data I have on my old iPad mini in iOS 7 format into the new already backed up iPad mini. Can someone help me?

Restore from iTune Backup
1. Settings>General>Reset>Erase all content and settings
2. You'll be asked twice to confirm
3. You'll see Apple logo and progress bar
4. You'll see a big iPad logo on screen
5. Configuration start
6. Set language
7. Set country
8. Select Network and input Password>Join
9. Enable Location Service>Next
10. You'll be given 3 options (a) Setup as New iPad (b) Restore from iCloud Backup (c) Restore from iTune Backup
11. Select Restore from iTune Backup
12. You will see picture of USB cable pointing towards iPad
13. Connect iPad to iTune (make sure iTune is on standby)
14. Tap Continue (computer)
15. Restore iPad from Backup (computer)
16. See progress bar with estimated time (computer)
17. See Restore in Progress on iPad
18. See Apple logo
19. See Apple and Progress Bar
20. Slide to Unlock
21. Copying Apps back to iPad (computer)
22. You'll see Loading/Installing/Waiting below the Apps (iPad)
23. Sync Music/Podcast/Movies to iPad (computer)
24. Sync completed (computer)

How to extract data from an interactive adobe form and update SAP database

Hi ,
I want to create an Interactive Adobe Form with two text fields and a submit button.On click of submit data entered in the text fields should be stored in a ZTable.
Please let me know the procedure for doing this in ABAP.
Thanks,
Prasuna.

Hi ,
pls have a look at the link below...
[http://www.adobe.com/devnet/livecycle/articles/lc_designer_schema_tip.pdf]
if u r using abap web dynpro application for calling the adobe form than on the CLICK Action of the button give the code :
zdept is the interface name ..
method ONACTIONCLICK .
data:
    Node_Adobe       type ref to If_Wd_Context_Node,
    Node_Zdept       type ref to If_Wd_Context_Node,
    Elem_Zdept       type ref to If_Wd_Context_Element,
    Stru_Zdept       type If_Main_View=>Element_Zdept .
data wa_zdept type zdept.
* navigate from <CONTEXT> to <ADOBE> via lead selection
Node_Adobe = wd_Context->get_Child_Node( Name = IF_MAIN_VIEW=>wdctx_Adobe ).
* navigate from <ADOBE> to <ZDEPT> via lead selection
Node_Zdept = Node_Adobe->get_Child_Node( Name = IF_MAIN_VIEW=>wdctx_Zdept ).
* get element via lead selection
Elem_Zdept = Node_Zdept->get_Element( ).
* get all declared attributes
Elem_Zdept->get_Static_Attributes(
    importing
      Static_Attributes = Stru_Zdept ).
wa_zdept-DEPTNO = Stru_Zdept-deptno.
wa_zdept-DNAME = Stru_Zdept-dname.
wa_zdept-LOC   = Stru_Zdept-loc.
insert into zdept values wa_zdept.
endmethod.
Hope this helps !!!
best of luck !!
Regards
Ravi

How can I save a partially filled in PDF form and complete it later, before submission?

When I try to do this (in Reader X), I get the following error message:
Any help would be greatly appreciated.

Save a copy is only available in Acrobat Pro, so users wouldn't have this option. Most of users would have only the PDF Reader to fill in the form. They can either click on the disc or go to File\Save As...\PDF to save the form. It works ok on my computer, but obviously not on all. Thank you for sharing your thoughts though.
Best wishes.

Collecting data via SharePoint using LiveCycle form and Adobe Tracker

I created a form in LiveCycle ES 8.2 and have distributed it via Adobe 9.3.4 Pro (I am running Windows 7.) For the first two days, when I opened up track forms, all was working well and I was receiving all responses. However, on the third day, I was not receiving any new responses, so I called up a couple of the people I had distributed the form to to see if they had in fact submitted it, and they had. Everything on their end looked as though the form went through. They received "sucessfully submitted" messages, although I still have not recieved them. So, I went in, created a new distribution with the people that I had not received responses from. Again, I received responses the first day, but have not received a response on any of the following days.
Is anyone else having this same issue?

UPDATE
The error that is being received is, "Acrobat cannot connect to the server, but will automatically submit your form once the server is online." Our SharePoint is showing no problems. In addition, I received a new response today out of the blue. But someone tried to resubmit a form and received the "cannot connect" error.

How to recive game save data form ipad

i loss my game save data in my ipad mini 2 , and how to recive games save data
            please help

Sure you can save arrays also
var mySo:SharedObject;
mySo = SharedObject.getLocal("application-name");
trace("loaded value: " + mySo.data.savedValue + "\n\n");
var testArray:Array = new Array(1,2,3,4,5,6,7,8);
saveValue(testArray);
function saveValue(testArray):void {
    mySo.data.savedValue = testArray;
    var flushStatus:String = null;
    try {
        flushStatus = mySo.flush(10000);
    } catch (error:Error) {
        trace("Error...Could not write SharedObject to disk\n");
    if (flushStatus != null) {
        switch (flushStatus) {
            case SharedObjectFlushStatus.PENDING :
                trace("Requesting permission to save object...\n");
                mySo.addEventListener(NetStatusEvent.NET_STATUS, onFlushStatus);
                break;
            case SharedObjectFlushStatus.FLUSHED :
                trace("Value flushed to disk.\n");
                break;
//to clear the cookie call this function
//clearValue();
function clearValue():void {
    trace("Cleared saved value...Reload SWF and the value should be \"undefined\".\n\n");
    delete mySo.data.savedValue;
function onFlushStatus(event:NetStatusEvent):void {
    trace("User closed permission dialog...\n");
    switch (event.info.code) {
        case "SharedObject.Flush.Success" :
            trace("User granted permission -- value saved.\n");
            break;
        case "SharedObject.Flush.Failed" :
            trace("User denied permission -- value not saved.\n");
            break;
    mySo.removeEventListener(NetStatusEvent.NET_STATUS, onFlushStatus);

Save data on state change

I’m using Labview 2010 p1 and trying to figure out have to save data on a specific change in the data. I have a VI that I can;
Watch the data change real time
Save single shot or continuous data
Save if data goes over “x”
But what I now need is to save once when the data goes over, then watch till the data goes under “x”, and repeat. So instead of continuously saving data (a waste), only want to save data when the motor first starts and when the motor stops. So I will have just two segments of data instead of 100’s.
Does this make sense?
SKIP

If your program already saves data when a threshold is passed on the increase, then you have accomplished much of what you need. Have the state change set a boolean to indicate to the data save to save the data, then have the data save reset it, then have the state change below the threshold set it again to allow saving, ... The state change boolean can be in a Functional Global, a single element queue, or depending on the structure, held in a shift register around the threshold determining code.
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

Cannot get my Plants vs Zombies 2 game save data from my iPhone 5 to my iPhone 6 Plus or to my iPad Air.

Hello! I recently replaced an iPhone 4 with an iPhone 6 Plus. When I restored the 6 Plus from the 5 backup, it did not include my save data for Plants vs Zombies 2, and I cannot get the game to synch between the two phones. I also cannot get the PvZ 2 data to my iPad Air. All devices running the latest version of iOS (8.1). Thank you.

Hello Jim
just thought id let you know that i bought the iexplore software, downloaded it and solved my issues in less than 5 mins!
great tip, thanks for your help.
regards
Charles

Calling and manipulating data on an Interactive Adobe form from ABAP report

Dear All,
Can you please tell me how to call an interactive adobe from from a custom adobe form?
If so how can we pass and receive data between the interactive adobe form and the abap report program?
Thank you.
Regards,
Prosenjit.

Hi,
It is possible to call an Interactive Adobe form from ABAP report and pass data into the form. If you search the forum, you will get many threads explaining the process. Let me know if you have any specific questions on this.
Regards,
Sanoosh

How do I complete online .pdf form and then print?

Sometimes, I can enter data on an online .pdf form and sometimes, I cannot. I need to complete forms and then print them rather than print a blank form to complete by handwriting. Window XP and Vista on my computers. I have installed some Adobe and Acrobat programs but do not know which ones would help me with my problem. thank you

Adobe is the company. I assume you are talking about Reader and Acrobat. It would be nice to know which ones, but the answer is likely the same. With Reader, you can only complete the form electronically in Reader if the creator added from fields for your to fill in. If not you have one option and that is to print. You could still play with filling it out electronically, but you would have to print the form, put it back in the printer, and use your word processor to place the information on the form. This is a bit time consuming and requires some measuring and possibly some trial and error, but it does work - I used to fill forms out like this all the time, but generally forms I filled out once a month and so it was worth the time.
With Acrobat, you can use the Typewriter tool, Use the Text Touchup Tool (not real convenient) with the ctrl key used when you place the cursor, or create your own fields. Depending on your version of Acrobat, you may not be able to create form fields (like AA7 Std and before I think, Pro includes the form tools). With forms, you may also have the choice of the form files under TOOLS>Advanced Editing (typically called AcroForms) or the FORM menu that typically takes you to Designer.
Those are your choices, though there are variations with version (next time try to tell us the program version you are using and if it is Reader or Acrobat - for Reader you may want to go to the Reader forum).

How to retrieve checkboxes values?

I am using a few checkboxes
<form method="post" action="testgetPara.jsp">
<input name="termcond1" type="checkbox" value="1" id="termcond" checked>
<input name="termcond2" type="checkbox" value="2" id="termcond" >
<input name="termcond3" type="checkbox" value="3" id="termcond" >
<input type ="submit" name ="submit" value ="submit">
</form>
and hope to retrieve the "checked" values from these boxes
so i do this
<%int i = 0;
//chkno is used only to retrieve the number of checked checkboxes
String chkno[] = request.getParameterValues("chkdelbook");
               //using a while loop to retrieve the value + execute it to the database.
while (i < chkno.length)
String isbn = request.getParameter("termcond");//get the specific array item
out.println(isbn);
//increment the i counter
++i;
%>
but it doesn't seem to be working
it return me with
An error occurred between lines: 2 and 16 in the jsp file: /testgetPara.jsp
Generated servlet error:
C:\jakarta-tomcat-4.0.3\work\localhost\Testing\testgetPara$jsp.java:69: [] can only be applied to arrays. It can't be applied to java.lang.String.
     String isbn = request.getParameter("termcond")[i];//get the specific array item
     ^
1 error
this error
may i know how to solve it?

but it give me a java.lang.NullPointerException
i have same id for my checkboxes, different name and
values for them
but it just doesnt work.NPE might be because tehere is no parameters named 'hobbies'
having same ID is not same as having same NAME (see the difference ID vs NAME)
if you had
<form>
<br>java<input type="checkbox" name="hobbies" value="java">
<br>haskell<input type="checkbox" name="hobbies" value="haskell">
<br>prolog<input type="checkbox" name="hobbies" value="prolog">
<input type="submit">
</form>
and it would appear something like this:
java [X]
haskell[X]
prolog[_]
[submit]
then you could probably write some code for it like this:
String[] hobbies = request.getParameterValues("hobbies");
for (int j = 0; j < hobbies.length; j++) {
%>
Your hobby is: <%= hobbies[j] %><br>
<%
}and it's output would hopefully look somewhat like this:
Your hobby is: java
Your hobby is: haskell
of course i have not tryed that code nore looked methods up from API recently, so it might have some minor bugs.

Webservice giving error "couldn't post data to " in adobe interactive form

Hi Gurus
My requirment in to place a submit button in adobe interactive form , when the user clicks on it the data in the form has to update the table. For this purpose i have configured webservice in my crm 2007 server. Now webservice is working and i m getting the response. but when i create a data connection in the adobe form and when i execute the webservice i getting " Couldn't post data to ". "
error . Plz help me out to resolve this issue
Thanks in advance
Regards
Johny

Hi Jhonny,
Make the Submit button a regular one instead of execute and place the following code in the click event(JavaScript).
var cURL = "Provide the Soap Address url which is present in WSDL";
var service = SOAP.connect(cURL);
xfa.connectionSet.DataConnection.execute(0);
Regards,
Mathan

How to save data in 4-bit mode instead of U8

Hi
I use LabVIEW to acquire and save data through the counter timer PCI6602.
My signals are really low so the data can be expressed in 4-bits (0-15).
I have used the conversion to U8 and write them using "Write Binary Files"
So this uses 1 byte for each data point but I would like to reduce it to 4bit (half byte) for each data point.
Can anyone help me with this?
I am attaching my program for reference
Solved!
Go to Solution.
Attachments:
DAQ-longvector1.vi ‏64 KB

Here's some easy code how to do it.
Note that this code assumes that the data is 4bit (0..15). If any of the upper 4 bit are set, you've got problems, of course
See if this makes sense. Good luck.
This example uses a single 1D array. You would eliminate the decimate/interleave and just use the two arrays.
A small comment to your code. There are a few weird constructs, but the use of two "split array" operations to take a simple derivative seems overkill. This made a honorary mention in the Rube Goldberg Hall of Fame.
Message Edited by altenbach on 12-04-2008 05:18 PM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
8bitTo4bit.png ‏18 KB

How to save data in oracle9i in binary form and how to retrieve it

Similar Messages

Maybe you are looking for