How to save the format at less time while working with a larger format that is over 5 GBs?
I am working on a 3' x 10' banner with 300dpi in Photoshop and it takes all of my time to do the extra tools to do, and it takes 10 minutes to save it or more. I have powerbook and CS6 on me. I put the highest memory in Photoshop preference. So I am bearing to work with it for hours for one small assigment, but why does it takes so long? is there a better way to do to save time and speed to make the poster banner to look greater than life? even in 200 dpi? What are your answer to my solution? I would be appreciated it. Thank you
station_two wrote:
a 10' banner does not even remotely need to be at 300 ppi...
A printer worth their salt will know.
Station two is correct.
For future reference here are two links to good articles about viewing distance and ppi:
http://www.digitalphotopro.com/technique/workflow/the-right-resolution
http://www.northlight-images.co.uk/article_pages/print_viewing_distance.html
Similar Messages
-
will the airport devices and time capsule work with telstras mobile hotspot (Sierra Wireless AirCard® 753S Mobile Hotspot)??
Yes. There are 2 ways you could use these devices:
Wirelessly 'join' the network. This would be slower and doesn't offer extending functionality.
Use an Ethernet cable (through Powerline if you can't run a cable). This is faster and offers extending functionality. I would recommend using Bridge Mode if possible. -
Will the latest 2 TB Time Capsule work with Windows 7
I purchased a latest 2 TB Time Capsule
My computer Engineer says, it will not work with my Windows 7 PC.
He says I should purchase a Mac computer for using it
My aim is to have some important files, movies and music files in it and use it as
my iPad accessory.
Kindly let me knowYour computer engineer needs demoting..
The TC is SMB compliant when setup properly.
Press reset 10sec and redo the setup.
Download and install airport utility for windows. That will also install bonjour which helps things along.
Rename the TC and wireless names to short, no spaces pure alphanumeric characters.
eg TC name.. TCgen4
2.4ghz wireless name.. TC24ghz
5ghz wireless name.. TC5ghz (set the 5ghz name different on the advanced wireless page).
Lock wireless to a/n - b/g
Lock wireless channels to 1, 6, or 11 as the only 3 non-overlapping channels.
On the disk page.. set the guest account to on with read and write permissions.. that makes life a bit easier. Obviously if security is a problem don't do it.. but TC is a home device.. and is so easy to hack into it is a joke.. so setting high security is seldom of value.
Make sure the workgroup is set correctly .. by default WORKGROUP.
Note the IP of the TC .. generally 10.0.1.1 and if it is running as the main router to the network, you can now open the TC via windows explorer by typing the ip or the TC name in the address bar thus.
\\TCgen4 or \\10.0.1.1 (Obviously if you use different name or IP then replace with those.)
To access the TC from ipad you need a file browser app.. just look it up.. the ipad does not actually natively work with the TC.. so ipad is actually more of an issue than windows.
Also note carefully .. there is no backup mechanism to save stuff on the TC.. it is a backup target not a NAS. It is made for Time Machine on a Mac not for storing files. They are also not exactly reliable. It is sealed.. there are no spare parts.. if it dies, apple will replace not fix it. And they tend to have a short life. If you trust your files to it.. one day they will all be gone.. make sure you back it up or only keep copies of files on it. -
How to save the material of MM01 into MARA table with customer Distribution
Hi to everyone.
This is first project of mine.
There is some modification in TC VA01.
We should write a code in standard program. I'll show the Enhancement below.
Our Client wants to move the material distribution channel (M.DC) to customer's distribution channel (C.DC) if Customer Sales Organization and Material Sales Organization are equal.
IF ( Customer Sales Organization and Material Sales Organization are equal)
check for there distribution channel whether its equal.
If ( C. Dc and M.Dc) are equal.
some process.
else (c.Dc not equal to m. Dc)
Move (M.Dc to C. Dc)
follow the same process.
Where do we have to add this enhancement in the program.
Please help me out, its very urgent.
Thanks and Regards in advance.
A.Rafiquei think u have to check customer+material table that is MVKE .
Regards
prabhu -
How to keep the chronological order of photos while working on photobook?
My photos are chronologically organized in an album. However, when I chose the album to work on the photo book, they were all mixed up in the sidebar. How can I maintain the chronological order in the sidebar photos as I work on the book?
Try the solutions prposed by Old Toad in this post:
This solved my questionRe: iphoto book
Actually the photos are supposed to be displayed in the photo tray at the right in chronological order. That's been one of the complaints of many users that the photos aren't arrange in the order they were in in the album used to create the book.
If they are not in chronological order for you try deleting the iPhoto preference file, com.apple.iPhoto.plist, that resided in your Home/Library/Preferences folder, launch iPhoto and try adding the photos again.
Try arranging the photos in the album in the order you want manually, select them all and use the Photos ➙ Batch Change ➙ Date menu option. Add 1 minute between photos. Then add the photos to a book and see if the order is what you want.
Regards
Léonie -
How to get the Personas Rotator add-on to work with new Firefox themes?
Before Firefox changed from personas to themes, the Personas Rotator add-on automatically switched personas at a set interval (ie. every 1 minute). I presently have Firefox 12.0 installed as well as the latest versions of both Personas Plus and Personas Rotator but the rotator does not work.
Before it was necessary to sign into My Favorites for the add-on to rotate my favorite personas, but now when I sign in, there is no rotation. Only one persona/theme that is enabled stays on the screen. There is no automatic rotation.
Private browsing mode is not selected. How can I get Personas Rotator to work again? Thank you.Good news! The Personas Rotator is now working again and switching personas automatically at 1 minute intervals.
It began working again after I went to the 'Appearance' tab under 'Add-ons' and removed all the personas listed there (these are ones I 'Added to Firefox' from My Favorites list which is accessed after signing in to the gallery).
But now I see that the personas that are presently being rotated are appearing in the 'Appearance' tab as well. I wonder if it will be necessary to 'remove' all these later to have them rotate again. Will post an update later for anyone having this same problem. -
How to determine the status of Maintenance Order while working in workflow
Hello Experts,
I am working on a workflow to release production related maintenance order.In this workflow I need to determine the status of the Maintenance Order (BOR object BUS2007) whether it has been released or not.I am trying to do this by condition step type.I can't understand which field of BUS2007 object I need to check to know the status of the maintenance order.
Can somebody help please?
Regards,
ManasHi,
Have you not getting any value in Status Profile attribute.
For new attribute u need to write coding, getting the value of that released field.
First, u need to implement by going to Edit->Change Release Status ->To implemented.
Then check your BO and generate it. If any error occurs in Menu bar Goto->Error List and see what is the error.
After generation of your BO, test your BO.
If test works fine, then Delegate with the standard BO.
To delegate, u need to be in initial screen of SWO1 and goto Settings->Delegate. Give Super type as Std BO and delegate type as your custom BO and use the Std BO in your workflow. -
Anyone know how to get the Nik Collection of plugins to work with PSCC?
As above..
Info from Nik:
From Nik:
On a Windows:
1. Make sure all versions of Photoshop are closed.
2. Run the Nik Collection installer from the file you received via email and downloaded. If you no longer have this file, you may email customer support ([email protected]) to have the file sent to you again.
3. During the installation process when you get to the Host Application window, you will notice a plus sign to add an install location. Click that button and navigate to C:\Program Files\Adobe\Photoshop CC\Plug-Ins\.
4. Complete the installation, then open Photoshop CC to ensure that the plug-ins have successfully been installed.
On a Macintosh:
1. Make sure all versions of Photoshop are closed.
2. Run the Nik Collection installer from the file you received via email and downloaded. If you no longer have this file, you may email customer support ([email protected]) to have the file sent to you again.
3. During the installation process when you get to the Host Application window, you will notice a plus sign to add an install location. Click that button and navigate to Mac HD|Applications|Adobe Photoshop CC|Plug-Ins and paste the Google folder into this location.
4. Complete the installation, then open Photoshop CC to ensure that the plug-ins have successfully been installed. -
I am trying to generate an application that saves a copy of its front panel on completion. This is easy to do using an invoke node with Print VI to HTML but this does not work in an .exe format. I have seen elsewhere that you have to use the Get Panel Image method, but no details are supplied in LV 5.0.1 documentation of how to use the "image" data (1-D Unsigned Byte array) that is generated. I want to save this in a format that can then be read as a bitmap in any standard graphics package. Any assistance?
Hi,
If you'd upgrade to LV5.1 or 6 you could use the 'standard' vi's for this.
You need a VI called "Write BMP File.vi". It's not shipped with LV5.0.1.
This vi only uses 3 subVI's, so perhaps someone at NI can convert it and
send it to you (sorry, I won't, it's copywrited).
If you cannot get this VI anywhere, you'll need to figure out the BMP file
format yourself. It's not too complicated, but still could take some days.
Perhaps someone figured it out before LV5.1 was released.
Regards,
Wiebe.
"RDK" wrote in message
news:[email protected]..
> I want to use Get Panel Image in Labview 5.0.1 and need details on how
> to save the BMP data generated
>
> I am trying to generate an application that saves a copy
of its front
> panel on completion. This is easy to do using an invoke node with
> Print VI to HTML but this does not work in an .exe format. I have seen
> elsewhere that you have to use the Get Panel Image method, but no
> details are supplied in LV 5.0.1 documentation of how to use the
> "image" data (1-D Unsigned Byte array) that is generated. I want to
> save this in a format that can then be read as a bitmap in any
> standard graphics package. Any assistance? -
How to send a text message to a group of people and save the list for next time?
how to send a text message to a group of people and save the list for next time from an iphone 4s?
Hey there ipremacha,
It sounds like you need to enable Text Message Forwarding on your iPhone for your iPad to send MMS/SMS messages through your phone.
Connect your iPhone, iPad, iPod touch, and Mac using Continuity
Go to Messages > Text Message Forwarding, and enable the device(s) you would like to forward messages to.
Your Mac, iPad, or iPod touch will display a code. Enter this code on your iPhone to verify the SMS feature.
Thank you for using Apple Support Communities.
Regards,
Sterling -
I get the following error while saving a task inside task list:
"The server was unable to save the form at this time. Please try again."
I tried restarting "search service host controller".
The server has 8 GB RAM and according to task manager, 6.67 GB is being used.
I logged into the site with user which is the owner of the site. I tried creating tasks from client as well as the SharePoint server itself. Same error is shown in both the cases.
How do I find information on the exact problem that is causing the error? What are possible solutions?Hi robikshrestha,
This error message often shows when there is low memory that can be used, the workaround restart the “SharePoint Search Hosting Controller” service is to release some memory, and make it work. Whether restart the service release memory
in your situation?
Would you please check whether this issue happens all the time in task list, or happens sometimes when the memory is lower to use. If it doesn’t have a large impact, you can restart the server, check the result. have a look at the event
log and ULS log, see whether there is related information.
If it happens all the time, would you please use other browsers, whether the results are same? This may be caused by some add-ons in IE, like Free Download Manager I have seen.
Thanks,
Qiao Wei
TechNet Community Support -
How to save the data present in TEXT BOX?
Hi friends i am able to create a text editor in one of my screen but i want to know how to save the data when the text is entered in that text box and retrive when they open the screen?
Hi ,
Please check the format below since it is based on a working code
first you need to create a text in s010 function module...
there should be some key based on which you plan to save the text..imagine it is Purchase order then..PO+item numner is always unique.eg:0090010(900PO/item10).so in the code you can append these two and they will be unique..so you can always retrieve them,overwrite,save them anytime you need
**************data declarations
TYPES: BEGIN OF TY_EDITOR,
EDIT(254) TYPE C,
END OF TY_EDITOR.
data: int_line type table of tline with header line.
data: gw_thead like thead.
data: int_table type standard table of ty_editor.
****************fill header..from SO10 t-code..when you save you need the unique key..youfill it here and pass it in save_text function module
GW_THEAD-TDNAME = loc_nam. " unique key for the text -> our unique key to identify the text
GW_THEAD-TDID = 'ST'. " Text ID from SO10
GW_THEAD-TDSPRAS = SY-LANGU. "current language
GW_THEAD-TDOBJECT = 'ZXXX'. "name of the text object created in SO10
*To Read from Container and get data to int_table
CALL METHOD EDITOR ->GET_TEXT_AS_R3TABLE
IMPORTING
TABLE = int_table
EXCEPTIONS
ERROR_DP = 1
ERROR_CNTL_CALL_METHOD = 2
ERROR_DP_CREATE = 3
POTENTIAL_DATA_LOSS = 4
others = 5.
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
loop data from int_table and save to int_line-tdline appending it.
*save the text
CALL FUNCTION 'SAVE_TEXT'
EXPORTING
HEADER = GW_THEAD
TABLES
LINES = InT_LINE
EXCEPTIONS
ID = 1
LANGUAGE = 2
NAME = 3
OBJECT = 4
OTHERS = 5.
IF SY-SUBRC 0.
ENDIF.
*To pass to Container
CALL METHOD EDITOR ->SET_TEXT
hope that the above sample with helps you solve the problem
Please check and revert,
Reward if helpful
Regards
Byju -
How to save the changes of trackpad in gest account ?
how to save the changes of trackpad in gest account because every time that i change them and restart it, it lose the changes ...
Hey cccosmas,
Thanks for the question. The following article provides an answer to your question:
OS X Mountain Lion: Set up guest users
http://support.apple.com/kb/PH11321
When guests log in, they don’t need a password. While logged in, they can’t change user settings or computer settings.
Important: Files created by a guest user are deleted when the user logs out. A temporary home folder is created for the guest user’s files, but this folder and its contents are deleted when the user logs out.
If you require these settings to be modified and retained in a secondary account, it may be best to setup a new user account:
OS X Mountain Lion: Create a new user account
http://support.apple.com/kb/PH11468
Thanks,
Matt M. -
How to change the format in shipping point
Hiii.. When we define shipping point, how to change the format from hours to days for entering loading time & pick pack time.
Regards,
JayWhen you maintain working times in define shipping point, the time is maintained in HRS. This is called precise scheduling.
If u do not mainatin the workin times field (blank) then the time is maintained in days. This is daily scheduling.
Vishal -
How to save the print configuration
Hello, in my business, employees need to print multiple documents per day.
But for these specific documents, they need to print with a size of 105%.
My question is how to save the print configuration because they need to remplace the size by 105% every time ...
Please help me
(Sorry for my bad english, i'm french)it was here : http://www.hostingpics.net/viewer.php?id=684187301.jpg
this screen appear after i press File -> print
and i need to put 105% every time i want to print document, how to save this ?
edit : this is not in the printer configuration
Maybe you are looking for
-
My macbook pro and ipad does not recognize my printer on my wireless network, but my pc does. How can I get my apple products to see it on the network so I can print wirelessly? My printer is a Brother MFC-J270W
-
How to view the jpeg's in library module
hi I'm a newbie. when I imported a few folders i can see the raw (nef) files along the bottom of the screen, but I can't see the accompanying jpeg A simple question I'm sure, but I'm stumped. If I process a raw file in nikon nx2 and convert it to a j
-
<form id="registrationform" name="register" method="post" action="mailto:<[email protected]>"> <div align="center"> <p> <input type="hidden" name="recipient" value="[email protected]" /> <input type="hidden" name="redirect" value=" htt
-
My macbook pro will only occasionally create a WiFi hotspot
I have created a WiFi hotspot on my Macbook Pro. Sometimes it will work perfectly but other times it refuses to create one even if I turn internet sharing on. Any ideas why this is the case?
-
Hi all, I want to download .pdf file (just like we download eg. .txt file using FM 'GUI_DOWNLOAD', I have to download a .pdf file). I tried with the same FM, but whenever I am trying to open the file, it's giving error. Anybody any idea? Is it possi