How to save three table control in subscreen from main screen
hi All,
I have three table control in subscreen and i want to save the content of all the table control from the save button of Main screen how can i do it.
Thanks
Narendra Vikram Vishwakarma
hi
in main screen PAI
when 'SAVE'
write the code here to save it.
thanks
Similar Messages
-
Call subscreen from main screen
Dear all,
I have a subscreen and from that subscreen i am calling another normal screen using 'call screen' statement. After doing some manipulation in the normal screen i want to go back to the subscreen on clicking 'BACK' button. i tried 'leave to screen' and 'call screen' in PAI of normal screen but it is not working. how to come back to the subscreen again?
Thanks in advance,
Aswin.Dear Friend,
You include a subscreen screen using the CALL SUBSCREEN statement in the flow logic of the main screen.
To include a subscreen screen in the subscreen area of the main screen and call its PBO flow logic, use the following statement in the PBO event of the main screen:
This statement assigns the subscreen screen with number <dynp> to the subscreen area called <area>. With <prog> you must specify the ABAP program in which the subscreen screen is defined. If it does not find a corresponding subscreen screen, a runtime error occurs. The PBO flow logic of the subscreen screen is also included at the same point. This can call PBO modules of the ABAP program in which the subscreen screen is defined. At the end of the subscreen PBO, the global fields from the program are passed to any identically-named screen fields in the subscreen screen. The PBO flow logic of the subscreen screen can itself include further subscreens.
The name <area> of the subscreen area must be entered directly without inverted commas. You can specify the names <prog> and <dynp> either as literals or variables. If you use variables, you must declare and fill identically-named variables in the ABAP program. The screen number <dynp> must be 4 characters long. If you do not assign a subscreen screen to an area, it remains empty.
PROCESS BEFORE OUTPUT.
CALL SUBSCREEN <area> INCLUDING <prog> <dynp>.
find the Below Example Code.
DATA: ok_code TYPE sy-ucomm,
save_ok TYPE sy-ucomm.
DATA: number1(4) TYPE n VALUE '0110',
number2(4) TYPE n VALUE '0130',
field(10) TYPE c, field1(10) TYPE c, field2(10) TYPE c.
CALL SCREEN 100.
MODULE status_100 OUTPUT.
SET PF-STATUS 'SCREEN_100'.
ENDMODULE.
MODULE fill_0110 OUTPUT.
field = 'Eingabe 1'(001).
ENDMODULE.
MODULE fill_0120 OUTPUT.
field = field1.
ENDMODULE.
MODULE fill_0130 OUTPUT.
field = 'Eingabe 2'(002).
ENDMODULE.
MODULE fill_0140 OUTPUT.
field = field2.
ENDMODULE.
MODULE cancel INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE save_ok INPUT.
save_ok = ok_code.
CLEAR ok_code.
ENDMODULE.
MODULE user_command_0110 INPUT.
IF save_ok = 'OK1'.
number1 = '0120'.
field1 = field.
CLEAR field.
ENDIF.
ENDMODULE.
MODULE user_command_0130 INPUT.
IF save_ok = 'OK2'.
number2 = '0140'.
field2 = field.
CLEAR field.
ENDIF.
ENDMODULE.
MODULE user_command_100 INPUT.
CASE save_ok.
WHEN 'SUB1'.
number1 = '0110'.
WHEN 'SUB2'.
number1 = '0120'.
CLEAR field1.
WHEN 'SUB3'.
number2 = '0130'.
WHEN 'SUB4'.
number2 = '0140'.
CLEAR field2.
ENDCASE.
ENDMODULE.
The screen flow logic for screen 100 is as follows:
PROCESS BEFORE OUTPUT.
MODULE status_100.
CALL SUBSCREEN: area1 INCLUDING sy-repid number1,
area2 INCLUDING sy-repid number2.
PROCESS AFTER INPUT.
MODULE cancel AT EXIT-COMMAND.
MODULE save_ok.
CALL SUBSCREEN: area1,
area2.
MODULE user_command_100.
The screen flow logic of subscreen screens 110 and 130 is:
PROCESS BEFORE OUTPUT.
MODULE fill_0110|0130.
PROCESS AFTER INPUT.
MODULE user_command_0110|0130.
The screen flow logic of subscreen screens 120 and 140 is:
PROCESS BEFORE OUTPUT.
MODULE fill_0120|0150.
PROCESS AFTER INPUT.
When you run the program, a screen appears on which subscreens 110 and 130 are displayed. The pushbuttons on the main screen allow you to choose between two subscreen screens for each screen area. The pushbuttons on the subscreens allow you to transfer the data from subscreens 110 and 130 to subscreens 120 and 140.
Since the same field name FIELD is used on all subscreens, the identically-named ABAP field is transferred more than once in each PBO and PAI event of the main screen. For this reason, the values have to be stored in the auxiliary fields FIELD1 and FIELD2 in the ABAP program.
The pushbuttons on the subscreen screens have different function codes, and they are handled normally in an ABAP field. If the function codes had had the same names, it would again have been necessary to use auxiliary fields. -
How to display a table control in a report
hi
how to display a table control in a reportcreate a screen in your report.
Call that screen in your report.
While designing your screen, use Table control creation wizard to create table control on that screen.
http://www.planetsap.com/online_pgm_main_page.htm -
How to call table control in subscreen in module pool program
Hi all,
I have req,need call table control in subscreen,but have done but when scroll bar value getting changed ,
please guide how to do it.if its possable send the code.
regards
santoshHi,
The navigation happens like this.
Consider you have a main screen and 2 subscreens.
When you click or do some event in the Subscreen 2 (lets say this is the one that has the table control), this will first trigger PAI of the Main Screen. In the flow logic of the Main screen, you would have written call subscreen <subscreen area1> and call subscreen <subscreen area2>.
Now the subscreens get triggered based on the order in which you have written in the flow logic.
So, here the modules before the first call subscreen statement in the Main Screen PAI is all executed. Now, it goes to the subscreen on which you have triggered an event and executes the modules in the subscreen.
This is how the execution goes when you have subscreens.
So there is no problem with the navigation. You only have to worry about the screen where you have the table control. Just debug and find where data is getting changed or duplicated. -
How to refresh the table control on some action
Hi All,
In a web Dynpro application, I am filling data to the Table control through Supply function. When I do some action (like save new record ) i want to refresh the table control means add the newly added record.
How to refresh the Table control.
Thanks
Hemalathahi hema........
if you are using a select query inside the supply function...
then...
you can just use node->invalidate(). method..
it just invalidates the node that is bound to the table.
so the supply function will be called again, which again uses the select query to fetch the values.. so that your table gets refreshed.
---regards,
alex b justin -
How to create a table control in Business HTML??
Hi All,
I dont have much knowledge about Business HTML. Can anyone tell me how to create a table control. The requirement is to accept two fields from user and then on click of a button get these values populated on a table control. Can u pls help me out on this??
Also to create the table, I tried using SAPTemplateTableBegin()functions, but using these functions gives me an error. Is the because the standard SAP template files does not exist or what??Hi Raja,
My first approach was the same as u said but the issue is when i try to generate a template i.e. (system generated template), the generated template uses standard TemplateLibraryDHTML.html functions like `SAP_TemplateHeader()`
`SAP_BodyContentBegin()`
`SAP_FormBegin()`
The above all is not supported in our client's ITS and so we have to manually create a table control using the step loop functions in DHTML and correspondingly FIELD-SET in ABAP.
We could successfully do this but as i mentioned in my previous message, we still have to make the table entries editable and refresh the internal table when the values in the table are changed.
Pls help!!
Rgds,
Swapna. -
How can we use TABLE CONTROL in BDC and WORK FLOW of ABAP.
how can we use TABLE CONTROL in BDC and WORK FLOW of ABAP.?
please explain the important questions.How to deal with table control / step loop in BDC
Steploop and table contol is inevitable in certain transactions. When we run BDC for such transactions, we will face the situation: how many visible lines of steploop/tablecontrol are on the screen? Although we can always find certain method to deal with it, such as function code 'NP', 'POPO', considering some extreme situation: there is only one line visible one the screen, our BDC program should display an error message. (See transaction 'ME21', we you resize your screen to let only one row visible, you can not enter mutiple lines on this screen even you use 'NP')
Now with the help of Poonam on sapfans.com developement forum, I find a method with which we can determine the number of visible lines on Transaction Screen from our Calling BDC program. Maybe it is useless to you, but I think it will give your some idea.
Demo ABAP code has two purposes:
1. how to determine number of visible lines and how to calculte page number;
(the 'calpage' routine has been modify to meet general purpose usage)
2. using field symbol in BDC program, please pay special attention to the difference in Static ASSIGN and Dynamic ASSIGN.
Now I begin to describe the step to implement my method:
(I use transaction 'ME21', screen 121 for sample,
the method using is Call Transation Using..)
Step1: go to screen painter to display the screen 121, then we can count the fixed line on this screen, there is 7 lines above the steploop and 2 lines below the steploop, so there are total 9 fixed lines on this screen. This means except these 9 lines, all the other line is for step loop. Then have a look at steploop itselp, one entry of it will occupy two lines.
(Be careful, for table control, the head and the bottom scroll bar will possess another two fixed lines, and there is a maximum number for table line)
Now we have : FixedLine = 9
LoopLine = 2(for table control, LoopLine is always equal to 1)
Step2: go to transaction itself(ME21) to see how it roll page, in ME21, the first line of new page is always occupied by the last line of last page, so it begin with index '02', but in some other case, fisrt line is empty and ready for input.
Now we have: FirstLine = 0
or FirstLine = 1 ( in our case, FirstLine is 1 because the first line of new page is fulfilled)
Step3: write a subroutine calcalculating number of pages
(here, the name of actual parameter is the same as formal parameter)
global data: FixedLine type i, " number of fixed line on a certain screen
LoopLine type i, " the number of lines occupied by one steploop item
FirstLine type i, " possbile value 0 or 1, 0 stand for the first line of new " scrolling screen is empty, otherwise is 1
Dataline type i, " number of items you will use in BDC, using DESCRIBE to get
pageno type i, " you need to scroll screen how many times.
line type i, " number of lines appears on the screen.
index(2) type N, " the screen index for certain item
begin type i, " from parameter of loop
end type i. " to parameter of loop
*in code sample, the DataTable-linindex stands for the table index number of this line
form calpage using FixedLine type i (see step 1)
LoopLine type i (see step 1)
FirstLine type i (see step 2)
DataLine type i ( this is the item number you will enter in transaction)
changing pageno type i (return the number of page, depends on run-time visible line in table control/ Step Loop)
changing line type i.(visible lines one the screen)
data: midd type i,
vline type i, "visible lines
if DataLine eq 0.
Message eXXX.
endif.
vline = ( sy-srows - FixedLine ) div LoopLine.
*for table control, you should compare vline with maximum line of
*table control, then take the small one that is min(vline, maximum)
*here only illustrate step loop
if FirstLine eq 0.
pageno = DataLine div vline.
if pageno eq 0.
pageno = pageno + 1.
endif.
elseif FirstLine eq 1.
pageno = ( DataLine - 1 ) div ( vline - 1 ) + 1.
midd = ( DataLine - 1 ) mod ( vline - 1).
if midd = 0 and DataLine gt 1.
pageno = pageno - 1.
endif.
endif.
line = vline.
endform.
Step4 write a subroutine to calculate the line index for each item.
form calindex using Line type i (visible lines on the screen)
FirstLine type i(see step 2)
LineIndex type i(item index)
changing Index type n. (index on the screen)
if FirstLine = 0.
index = LineIndex mod Line.
if index = '00'.
index = Line.
endif.
elseif FirstLine = 1.
index = LineIndex mod ( Line - 1 ).
if ( index between 1 and 0 ) and LineIndex gt 1.
index = index + Line - 1.
endif.
if Line = 2.
index = index + Line - 1.
endif.
endif.
endform.
Step5 write a subroutine to calculate the loop range.
form calrange using Line type i ( visible lines on the screen)
DataLine type i
FirstLine type i
loopindex like sy-index
changing begin type i
end type i.
If FirstLine = 0.
if loopindex = 1.
begin = 1.
if DataLine <= Line.
end = DataLine.
else.
end = Line.
endif.
elseif loopindex gt 1.
begin = Line * ( loopindex - 1 ) + 1.
end = Line * loopindex.
if end gt DataLine.
end = DataLine.
endif.
endif.
elseif FirstLine = 1.
if loopindex = 1.
begin = 1.
if DataLine <= Line.
end = DataLine.
else.
end = Line.
endif.
elseif loop index gt 1.
begin = ( Line - 1 ) * ( loopindex - 1 ) + 2.
end = ( Line - 1 ) * ( loopindex - 1 ) + Line.
if end gt DataLine.
end = DataLine.
endif.
endif.
endif.
endform.
Step6 using field sysbol in your BDC, for example: in ME21, but you should calculate each item will correponding to which index in steploop/Table Control
form creat_bdc.
field-symbols: <material>, <quan>, <indicator>.
data: name1(14) value 'EKPO-EMATN(XX)',
name2(14) value 'EKPO-MENGE(XX)',
name3(15) value 'RM06E-SELKZ(XX)'.
assign: name1 to <material>,
name2 to <quan>,
name3 to <indicator>.
do pageno times.
if sy-index gt 1
*insert scroll page ok_code"
endif.
perform calrange using Line DataLine FirstLine sy-index
changing begin end.
loop at DataTable from begin to end.
perform calindex using Line FirstLine DataTable-LineIndex changing Index.
name1+11(2) = Index.
name2+11(2) = Index.
name3+12(2) = Index.
perform bdcfield using <material> DataTable-matnr.
perform bdcfield using <quan> DataTable-menge.
perform bdcfield using <indicator> DataTable-indicator.
endloop.
enddo.
An example abap program of handling Table Control during bdc programming.
REPORT zmm_bdcp_purchaseorderkb02
NO STANDARD PAGE HEADING LINE-SIZE 255.
Declaring internal tables *
*-----Declaring line structure
DATA : BEGIN OF it_dummy OCCURS 0,
dummy(255) TYPE c,
END OF it_dummy.
*-----Internal table for line items
DATA : BEGIN OF it_idata OCCURS 0,
ematn(18), "Material Number.
menge(13), "Qyantity.
netpr(11), "Net Price.
werks(4), "Plant.
ebelp(5), "Item Number.
END OF it_idata.
*-----Deep structure for header data and line items
DATA : BEGIN OF it_me21 OCCURS 0,
lifnr(10), "Vendor A/c No.
bsart(4), "A/c Type.
bedat(8), "Date of creation of PO.
ekorg(4), "Purchasing Organisation.
ekgrp(3), "Purchasing Group.
x_data LIKE TABLE OF it_idata,
END OF it_me21.
DATA : x_idata LIKE LINE OF it_idata.
DATA : v_delimit VALUE ','.
DATA : v_indx(3) TYPE n.
DATA : v_fnam(30) TYPE c.
DATA : v_count TYPE n.
DATA : v_ne TYPE i.
DATA : v_ns TYPE i.
*include bdcrecx1.
INCLUDE zmm_incl_purchaseorderkb01.
Search help for file *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
IMPORTING
file_name = p_file.
START-OF-SELECTION.
To upload the data into line structure *
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = p_file
filetype = 'DAT'
TABLES
data_tab = it_dummy.
Processing the data from line structure to internal tables *
REFRESH:it_me21.
CLEAR :it_me21.
LOOP AT it_dummy.
IF it_dummy-dummy+0(01) = 'H'.
v_indx = v_indx + 1.
CLEAR it_idata.
REFRESH it_idata.
CLEAR it_me21-x_data.
REFRESH it_me21-x_data.
SHIFT it_dummy.
SPLIT it_dummy AT v_delimit INTO it_me21-lifnr
it_me21-bsart
it_me21-bedat
it_me21-ekorg
it_me21-ekgrp.
APPEND it_me21.
ELSEIF it_dummy-dummy+0(01) = 'L'.
SHIFT it_dummy.
SPLIT it_dummy AT v_delimit INTO it_idata-ematn
it_idata-menge
it_idata-netpr
it_idata-werks
it_idata-ebelp.
APPEND it_idata TO it_me21-x_data.
MODIFY it_me21 INDEX v_indx.
ENDIF.
ENDLOOP.
To open the group *
PERFORM open_group.
To populate the bdcdata table for header data *
LOOP AT it_me21.
v_count = v_count + 1.
REFRESH it_bdcdata.
PERFORM subr_bdc_table USING: 'X' 'SAPMM06E' '0100',
' ' 'BDC_CURSOR' 'EKKO-LIFNR',
' ' 'BDC_OKCODE' '/00',
' ' 'EKKO-LIFNR' it_me21-lifnr,
' ' 'RM06E-BSART' it_me21-bsart,
' ' 'RM06E-BEDAT' it_me21-bedat,
' ' 'EKKO-EKORG' it_me21-ekorg,
' ' 'EKKO-EKGRP' it_me21-ekgrp,
' ' 'RM06E-LPEIN' 'T'.
PERFORM subr_bdc_table USING: 'X' 'SAPMM06E' '0120',
' ' 'BDC_CURSOR' 'RM06E-EBELP',
' ' 'BDC_OKCODE' '/00'.
MOVE 1 TO v_indx.
*-----To populate the bdcdata table for line item data
LOOP AT it_me21-x_data INTO x_idata.
CONCATENATE 'EKPO-EMATN(' v_indx ')' INTO v_fnam.
PERFORM subr_bdc_table USING ' ' v_fnam x_idata-ematn.
CONCATENATE 'EKPO-MENGE(' v_indx ')' INTO v_fnam.
PERFORM subr_bdc_table USING ' ' v_fnam x_idata-menge.
CONCATENATE 'EKPO-NETPR(' v_indx ')' INTO v_fnam.
PERFORM subr_bdc_table USING ' ' v_fnam x_idata-netpr.
CONCATENATE 'EKPO-WERKS(' v_indx ')' INTO v_fnam.
PERFORM subr_bdc_table USING ' ' v_fnam x_idata-werks.
v_indx = v_indx + 1.
PERFORM subr_bdc_table USING: 'X' 'SAPMM06E' '0120',
' ' 'BDC_CURSOR' 'RM06E-EBELP',
' ' 'BDC_OKCODE' '/00'.
ENDLOOP.
PERFORM subr_bdc_table USING: 'X' 'SAPMM06E' '0120',
' ' 'BDC_CURSOR' 'RM06E-EBELP',
' ' 'BDC_OKCODE' '=BU'.
PERFORM bdc_transaction USING 'ME21'.
ENDLOOP.
PERFORM close_group.
End of selection event *
END-OF-SELECTION.
IF session NE 'X'.
*-----To display the successful records
WRITE :/10 text-001. "Sucess records
WRITE :/10 SY-ULINE(20).
SKIP.
IF it_sucess IS INITIAL.
WRITE :/ text-002.
ELSE.
WRITE :/ text-008, "Total number of Succesful records
35 v_ns.
SKIP.
WRITE:/ text-003, "Vendor Number
17 text-004, "Record number
30 text-005. "Message
ENDIF.
LOOP AT it_sucess.
WRITE:/4 it_sucess-lifnr,
17 it_sucess-tabix CENTERED,
30 it_sucess-sucess_rec.
ENDLOOP.
SKIP.
*-----To display the erroneous records
WRITE:/10 text-006. "Error Records
WRITE:/10 SY-ULINE(17).
SKIP.
IF it_error IS INITIAL.
WRITE:/ text-007. "No error records
ELSE.
WRITE:/ text-009, "Total number of erroneous records
35 v_ne.
SKIP.
WRITE:/ text-003, "Vendor Number
17 text-004, "Record number
30 text-005. "Message
ENDIF.
LOOP AT it_error.
WRITE:/4 it_error-lifnr,
17 it_error-tabix CENTERED,
30 it_error-error_rec.
ENDLOOP.
REFRESH it_sucess.
REFRESH it_error.
ENDIF.
CODE IN INCLUDE.
Include ZMM_INCL_PURCHASEORDERKB01
DATA: it_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
DATA: it_MESSTAB LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
DATA: E_GROUP_OPENED.
*-----Internal table to store sucess records
DATA:BEGIN OF it_sucess OCCURS 0,
msgtyp(1) TYPE c,
lifnr LIKE ekko-lifnr,
tabix LIKE sy-tabix,
sucess_rec(125),
END OF it_sucess.
DATA: g_mess(125) type c.
*-----Internal table to store error records
DATA:BEGIN OF it_error OCCURS 0,
msgtyp(1) TYPE c,
lifnr LIKE ekko-lifnr,
tabix LIKE sy-tabix,
error_rec(125),
END OF it_error.
Selection screen
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS session RADIOBUTTON GROUP ctu. "create session
SELECTION-SCREEN COMMENT 3(20) text-s07 FOR FIELD session.
SELECTION-SCREEN POSITION 45.
PARAMETERS ctu RADIOBUTTON GROUP ctu. "call transaction
SELECTION-SCREEN COMMENT 48(20) text-s08 FOR FIELD ctu.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(20) text-s01 FOR FIELD group.
SELECTION-SCREEN POSITION 25.
PARAMETERS group(12). "group name of session
SELECTION-SCREEN COMMENT 48(20) text-s05 FOR FIELD ctumode.
SELECTION-SCREEN POSITION 70.
PARAMETERS ctumode LIKE ctu_params-dismode DEFAULT 'N'.
"A: show all dynpros
"E: show dynpro on error only
"N: do not display dynpro
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 48(20) text-s06 FOR FIELD cupdate.
SELECTION-SCREEN POSITION 70.
PARAMETERS cupdate LIKE ctu_params-updmode DEFAULT 'L'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(20) text-s03 FOR FIELD keep.
SELECTION-SCREEN POSITION 25.
PARAMETERS: keep AS CHECKBOX. "' ' = delete session if finished
"'X' = keep session if finished
SELECTION-SCREEN COMMENT 48(20) text-s09 FOR FIELD e_group.
SELECTION-SCREEN POSITION 70.
PARAMETERS e_group(12). "group name of error-session
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 51(17) text-s03 FOR FIELD e_keep.
SELECTION-SCREEN POSITION 70.
PARAMETERS: e_keep AS CHECKBOX. "' ' = delete session if finished
"'X' = keep session if finished
SELECTION-SCREEN END OF LINE.
PARAMETERS:p_file LIKE rlgrap-filename.
at selection screen *
AT SELECTION-SCREEN.
group and user must be filled for create session
IF SESSION = 'X' AND
GROUP = SPACE. "OR USER = SPACE.
MESSAGE E613(MS).
ENDIF.
create batchinput session *
FORM OPEN_GROUP.
IF SESSION = 'X'.
SKIP.
WRITE: /(20) 'Create group'(I01), GROUP.
SKIP.
*----open batchinput group
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
GROUP = GROUP
USER = sy-uname.
WRITE:/(30) 'BDC_OPEN_GROUP'(I02),
(12) 'returncode:'(I05),
SY-SUBRC.
ENDIF.
ENDFORM. "OPEN_GROUP
end batchinput session *
FORM CLOSE_GROUP.
IF SESSION = 'X'.
*------close batchinput group
CALL FUNCTION 'BDC_CLOSE_GROUP'.
WRITE: /(30) 'BDC_CLOSE_GROUP'(I04),
(12) 'returncode:'(I05),
SY-SUBRC.
ELSE.
IF E_GROUP_OPENED = 'X'.
CALL FUNCTION 'BDC_CLOSE_GROUP'.
WRITE: /.
WRITE: /(30) 'Fehlermappe wurde erzeugt'(I06).
ENDIF.
ENDIF.
ENDFORM. "CLOSE_GROUP
Start new transaction according to parameters *
FORM BDC_TRANSACTION USING TCODE TYPE ANY.
DATA: L_SUBRC LIKE SY-SUBRC.
*------batch input session
IF SESSION = 'X'.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = TCODE
TABLES
DYNPROTAB = it_BDCDATA.
WRITE: / 'BDC_INSERT'(I03),
TCODE,
'returncode:'(I05),
SY-SUBRC,
'RECORD:',
SY-INDEX.
ELSE.
REFRESH it_MESSTAB.
CALL TRANSACTION TCODE USING it_BDCDATA
MODE CTUMODE
UPDATE CUPDATE
MESSAGES INTO it_MESSTAB.
L_SUBRC = SY-SUBRC.
WRITE: / 'CALL_TRANSACTION',
TCODE,
'returncode:'(I05),
L_SUBRC,
'RECORD:',
SY-INDEX.
ENDIF.
Message handling for Call Transaction *
perform subr_mess_hand using g_mess.
*-----Erzeugen fehlermappe
IF L_SUBRC <> 0 AND E_GROUP <> SPACE.
IF E_GROUP_OPENED = ' '.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
GROUP = E_GROUP
USER = sy-uname
KEEP = E_KEEP.
E_GROUP_OPENED = 'X'.
ENDIF.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = TCODE
TABLES
DYNPROTAB = it_BDCDATA.
ENDIF.
REFRESH it_BDCDATA.
ENDFORM. "BDC_TRANSACTION
Form subr_bdc_table *
text
-->P_0220 text *
-->P_0221 text *
-->P_0222 text *
FORM subr_bdc_table USING VALUE(P_0220) TYPE ANY
VALUE(P_0221) TYPE ANY
VALUE(P_0222) TYPE ANY.
CLEAR it_bdcdata.
IF P_0220 = ' '.
CLEAR it_bdcdata.
it_bdcdata-fnam = P_0221.
it_bdcdata-fval = P_0222.
APPEND it_bdcdata.
ELSE.
it_bdcdata-dynbegin = P_0220.
it_bdcdata-program = P_0221.
it_bdcdata-dynpro = P_0222.
APPEND it_bdcdata.
ENDIF.
ENDFORM. " subr_bdc_table
Form subr_mess_hand *
text *
-->P_G_MESS text *
FORM subr_mess_hand USING P_G_MESS TYPE ANY.
LOOP AT IT_MESSTAB.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
ID = it_messtab-msgid
LANG = it_messtab-msgspra
NO = it_messtab-msgnr
v1 = it_messtab-msgv1
v2 = it_messtab-msgv2
IMPORTING
MSG = P_G_MESS
EXCEPTIONS
OTHERS = 0.
CASE it_messtab-msgtyp.
when 'E'.
it_error-error_rec = P_G_MESS.
it_error-lifnr = it_me21-lifnr.
it_error-tabix = v_count.
APPEND IT_ERROR.
when 'S'.
it_sucess-sucess_rec = P_G_MESS.
it_sucess-lifnr = it_me21-lifnr.
it_sucess-tabix = v_count.
APPEND IT_SUCESS.
endcase.
ENDLOOP.
Describe table it_sucess lines v_ns.
Describe table it_error lines v_ne.
ENDFORM. " subr_mess_hand
Also refer
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/bdc-table-control-668404
and
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
Regards,
srinivas
<b>*reward for useful answers*</b> -
How to handle the table control in bapi?
how to handle the table control in bapi? example va01.
i pass multiple line item what is the procedure?
header detail same .
eample ship to party
sale to party.
line item mulptiple
10 mat1
2o mat2
30 mat3.
in bapi we can pass sinle line item.
any way to handle multiple line item pass through the bapi.
Message was edited by:
Karthikeyan PanduranganBAPI is not going through the screen flow logic so you need not to worry about the table control. Just check in the BAPi there must be one table parameter for line items just pass one int table with your data to that table parameter it will automatically update the tables.
Regards
shiba dutta -
How can we handle table control parameter in lsmw
hi guru,
please tell me how can we handle table control parameter in lsmw.
thanks & regards
subhasis.Hi,
we create table control program (module pool) this program use in LSMW,
we mention the transaction code ,write ur table control program name.
This is use full for u
Reguards,
lakshmi -
How can we handle table control in BDC?
Hi,
How can we handle table control in BDC?
regards
eswarhi,
check this example:
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
ex:
*& Report ZSR_BDC_TBCTRL
REPORT ZSR_BDC_TBCTRL
NO STANDARD PAGE HEADING LINE-SIZE 255.
TABLES : RF02K,LFA1,LFBK.
DATA : BEGIN OF IT_VEN OCCURS 0,
LIFNR LIKE RF02K-LIFNR,
KTOKK LIKE RF02K-KTOKK,
NAME1 LIKE LFA1-NAME1,
SORTL LIKE LFA1-SORTL,
LAND1 LIKE LFA1-LAND1,
SPRAS LIKE LFA1-SPRAS,
BANKS(6) TYPE C,
BANKL(17) TYPE C,
BANKN(19) TYPE C,
END OF IT_VEN.
DATA : BEGIN OF BANKS OCCURS 0,
BANKS LIKE LFBK-BANKS,
END OF BANKS,
BEGIN OF BANKL OCCURS 0,
BANKL LIKE LFBK-BANKL,
END OF BANKL,
BEGIN OF BANKN OCCURS 0,
BANKN LIKE LFBK-BANKN,
END OF BANKN.
DATA : FLD(20) TYPE C,
CNT(2) TYPE N.
DATA : BDCTAB LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
INCLUDE BDCRECX1.
START-OF-SELECTION.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = 'Z:\sr.TXT'
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
DATA_TAB = IT_VEN
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
PERFORM OPEN_GROUP.
LOOP AT IT_VEN.
REFRESH BDCDATA.
REFRESH : BANKS,BANKL,BANKN..
SPLIT IT_VEN-BANKS AT ',' INTO TABLE BANKS.
SPLIT IT_VEN-BANKL AT ',' INTO TABLE BANKL.
SPLIT IT_VEN-BANKN AT ',' INTO TABLE BANKN.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0100'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'RF02K-KTOKK'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'RF02K-LIFNR'
IT_VEN-LIFNR.
PERFORM BDC_FIELD USING 'RF02K-KTOKK'
IT_VEN-KTOKK.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0110'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'LFA1-SPRAS'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'LFA1-NAME1'
IT_VEN-NAME1.
PERFORM BDC_FIELD USING 'LFA1-SORTL'
IT_VEN-SORTL.
PERFORM BDC_FIELD USING 'LFA1-LAND1'
IT_VEN-LAND1.
PERFORM BDC_FIELD USING 'LFA1-SPRAS'
IT_VEN-SPRAS.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0120'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'LFA1-KUNNR'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0130'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'LFBK-BANKN(02)'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ENTR'.
*perform bdc_field using 'LFBK-BANKS(01)'
'DE'.
*perform bdc_field using 'LFBK-BANKS(02)'
'DE'.
*perform bdc_field using 'LFBK-BANKL(01)'
'10020030'.
*perform bdc_field using 'LFBK-BANKL(02)'
'67270003'.
*perform bdc_field using 'LFBK-BANKN(01)'
'12345'.
*perform bdc_field using 'LFBK-BANKN(02)'
'66666'.
MOVE 1 TO CNT.
LOOP AT BANKS.
CONCATENATE 'LFBK-BANKS(' CNT ') ' INTO FLD.
PERFORM BDC_FIELD USING FLD BANKS-BANKS.
CNT = CNT + 1.
ENDLOOP.
MOVE 1 TO CNT.
LOOP AT BANKL.
CONCATENATE 'LFBK-BANKL(' CNT ') ' INTO FLD.
PERFORM BDC_FIELD USING FLD BANKL-BANKL.
CNT = CNT + 1.
ENDLOOP.
MOVE 1 TO CNT.
LOOP AT BANKN.
CONCATENATE 'LFBK-BANKN(' CNT ') ' INTO FLD.
PERFORM BDC_FIELD USING FLD BANKN-BANKN.
CNT = CNT + 1.
ENDLOOP.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0130'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ENTR'.
PERFORM BDC_DYNPRO USING 'SAPLSPO1' '0300'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=YES'.
PERFORM BDC_TRANSACTION USING 'XK01'.
ENDLOOP.
PERFORM CLOSE_GROUP. -
How to save Internal table as a local file?
Hi,
How to save Interanl table as a local file ?
I had some data which i had selected in Interanl table and would like to send this as an attachment by attaching internal table contents as a local file--Hi friend,
See sample code for GUI_DOWNLOAD.
*Types
TYPES: BEGIN OF g_r_mara,
matnr LIKE mara-matnr,
ersda LIKE mara-ersda,
laeda LIKE mara-laeda,
mtart LIKE mara-mtart,
mbrsh LIKE mara-mbrsh,
END OF g_r_mara.
*Data
DATA: g_t_mara TYPE TABLE OF g_r_mara,
filename TYPE string.
*Tables
TABLES: mara, sscrfields.
*Selection Screen
SELECT-OPTIONS: s_matnr FOR mara-matnr.
SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT 10(20) text-001 FOR FIELD p1.
SELECTION-SCREEN PUSHBUTTON 12(20) word USER-COMMAND uc.
SELECTION-SCREEN END OF LINE.
*Initilizing data.
INITIALIZATION.
word = 'word'.
filename = 'C:\Testing.doc'. <------- File name and location
AT SELECTION-SCREEN.
CASE sscrfields-ucomm.
WHEN 'UC'.
*Data retrival
SELECT matnr ersda laeda mtart mbrsh
INTO CORRESPONDING FIELDS OF TABLE g_t_mara
FROM mara
WHERE matnr IN s_matnr.
*Downloading data from internal table to excel
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = filename
filetype = 'ASC'
write_field_separator = 'X'
TABLES
data_tab = g_t_mara.
ENDCASE.
(Note: Downloaded file is in C:\Testing.doc)
You can change the file format by changing the extension in filename.
Might helpful for u.
Thanks.. -
How to Bring IT0008 table control in HCM P&F
Hi :
I have a requirement of adding IT0008 table control in my HCM form which will contain the following fields:
I0008_LIN_ANZHL
I0008_LIN_BETRG
I0008_LIN_EINHT
I0008_LIN_EITXT
I0008_LIN_INDBW
I0008_LIN_LGART
I0008_LIN_LGTXT
I0008_LIN_OPKEN
I0008_LIN_PERNR
I0008_LIN_WAERS
I am using structure HCMT_BSP_PA_XX_R0008_LIN_A ,
but my question is how to create the table control in form? How to add multiple rows and How to default wagetypes in the form?
Pls advise
Sinchanwe have discussed the same scenario in the note 1043692
PLease go through the steps it should help you -
How to modify the table control?
Hi all,
How to modify the table control after setting the lines = 1. ie tbl_ctr-lines = 1.(tbl_ctr is the table control).
Can anyone explain this with an example?
Thanks.hi
http://help.sap.com/saphelp_nw04/helpdata/EN/9f/dbac5e35c111d1829f0000e829fbfe/content.htm
Regards
pavan -
How to clear the table control content
Hi All,
I am doing BDC for cost estimate change. In this the transaction KKPB contains table control. So when ever i process with particular cost estimate, i need to fill the table control with the values. Here when i am doing the BDC for change, i need to clear all the contents of the table control then i need to fill with new entries.
So my problems is how to clear the table control entriee?? please help me in this??
Many Thanks,
Raghu.Hi this might help u.
Check the below link.
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
THis is example to upload the Bank details of the Vendor which has the TC.
REPORT zprataptable2
NO STANDARD PAGE HEADING LINE-SIZE 255.
DATA : BEGIN OF itab OCCURS 0,
i1 TYPE i,
lifnr LIKE rf02k-lifnr,
bukrs LIKE rf02k-bukrs,
ekorg LIKE rf02k-ekorg,
ktokk LIKE rf02k-ktokk,
anred LIKE lfa1-anred,
name1 LIKE lfa1-name1,
sortl LIKE lfa1-sortl,
land1 LIKE lfa1-land1,
akont LIKE lfb1-akont,
fdgrv LIKE lfb1-fdgrv,
waers LIKE lfm1-waers,
END OF itab.
DATA : BEGIN OF jtab OCCURS 0,
j1 TYPE i,
banks LIKE lfbk-banks,
bankl LIKE lfbk-bankl,
bankn LIKE lfbk-bankn,
END OF jtab.
DATA : cnt(4) TYPE n.
DATA : fdt(20) TYPE c.
DATA : c TYPE i.
INCLUDE bdcrecx1.
START-OF-SELECTION.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = 'C:\first1.txt'
filetype = 'DAT'
TABLES
data_tab = itab.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = 'C:\second.txt'
filetype = 'DAT'
TABLES
data_tab = jtab.
LOOP AT itab.
PERFORM bdc_dynpro USING 'SAPMF02K' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-KTOKK'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'RF02K-LIFNR'
itab-lifnr.
PERFORM bdc_field USING 'RF02K-BUKRS'
itab-bukrs.
PERFORM bdc_field USING 'RF02K-EKORG'
itab-ekorg.
PERFORM bdc_field USING 'RF02K-KTOKK'
itab-ktokk.
PERFORM bdc_dynpro USING 'SAPMF02K' '0110'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-LAND1'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFA1-ANRED'
itab-anred.
PERFORM bdc_field USING 'LFA1-NAME1'
itab-name1.
PERFORM bdc_field USING 'LFA1-SORTL'
itab-sortl.
PERFORM bdc_field USING 'LFA1-LAND1'
itab-land1.
PERFORM bdc_dynpro USING 'SAPMF02K' '0120'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-KUNNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKN(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
cnt = 0.
LOOP AT jtab WHERE j1 = itab-i1.
cnt = cnt + 1.
CONCATENATE 'LFBK-BANKS(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-banks.
CONCATENATE 'LFBK-BANKL(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-bankl.
CONCATENATE 'LFBK-BANKN(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-bankn.
IF cnt = 5.
cnt = 0.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=P+'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKN(02)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
ENDIF.
ENDLOOP.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0210'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-FDGRV'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFB1-AKONT'
itab-akont.
PERFORM bdc_field USING 'LFB1-FDGRV'
itab-fdgrv.
PERFORM bdc_dynpro USING 'SAPMF02K' '0215'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-ZTERM'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0220'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB5-MAHNA'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0310'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFM1-WAERS'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFM1-WAERS'
itab-waers.
PERFORM bdc_dynpro USING 'SAPMF02K' '0320'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-LIFNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM bdc_dynpro USING 'SAPLSPO1' '0300'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=YES'.
PERFORM bdc_transaction USING 'XK01'.
ENDLOOP.
PERFORM close_group.
Header file:
1 63190 0001 0001 0001 mr bal188 b in 31000 a1 inr
2 63191 0001 0001 0001 mr bal189 b in 31000 a1 inr
TC file:
1 in sb 11000
1 in sb 12000
1 in sb 13000
1 in sb 14000
1 in sb 15000
1 in sb 16000
1 in sb 17000
1 in sb 18000
1 in sb 19000
1 in sb 20000
1 in sb 21000
1 in sb 22000
2 in sb 21000
2 in sb 22000
REPORT zmm_pr_upload_mat
NO STANDARD PAGE HEADING
LINE-SIZE 255.
Standard Include for Selection Screen
INCLUDE bdcrecx1.
Internal Table for Upload Data
DATA: BEGIN OF i_pr OCCURS 0,
Header Screen
sno(3), " SNo
bsart(004), " PR Type
epstp(001), " Item Category
knttp(001), " Account Assignment
eeind(010), " Delivery Date
lpein(001), " Category of Del Date
werks(004), " Plant
lgort(004), " Storage Location
ekgrp(003), " Purchasing Group
matkl(009), " Material Group
bednr(010), " Tracking No
afnam(012), " Requisitioner
Item Details
matnr(018), " Material No
menge(017), " Quantity
badat(010),
frgdt(010),
preis(014), " Valuation Price
waers(005), " Currency
peinh(005),
wepos(001),
repos(001),
sakto(010), " GL Account
kostl(010), " Cost Center
bnfpo(005),
END OF i_pr.
Internal Table for header Data
DATA: BEGIN OF it_header OCCURS 0,
sno(3), " SNo
bsart(004), " PR Type
epstp(001), " Item Category
knttp(001), " Account Assignment
eeind(010), " Delivery Date
werks(004), " Plant
lgort(004), " Storage Location
ekgrp(003), " Purchasing Group
matkl(009), " Material Group
bednr(010), " Tracking No
afnam(012), " Requisitioner
END OF it_header.
Internal Table for Item Data
DATA: BEGIN OF it_item OCCURS 0,
sno(3), " SNo
matnr(018), " Material No
menge(017), " Quantity
preis(014), " Valuation Price
sakto(010), " GL Account
kostl(010), " Cost Center
END OF it_item.
Data Variables & Constants
CONSTANTS : c_x VALUE 'X'. " Flag
DATA : v_l(2), " Counter
v_rowno(5), " Row No
v_2(2), " Counter
v_rows LIKE sy-srows, " Rows in TC
v_field(45). " String
Parameters
PARAMETERS: p_file LIKE ibipparms-path. " Filename
At selection-screen on Value Request for file Name
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
Get the F4 Values for the File
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
IMPORTING
file_name = p_file.
Start of Selection
START-OF-SELECTION.
Open the BDC Session
PERFORM open_group.
Upload the File into internal Table
CALL FUNCTION 'UPLOAD'
EXPORTING
filename = p_file
filetype = 'DAT'
TABLES
data_tab = i_pr
EXCEPTIONS
conversion_error = 1
invalid_table_width = 2
invalid_type = 3
no_batch = 4
unknown_error = 5
gui_refuse_filetransfer = 6
OTHERS = 7.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
SORT i_pr BY sno.
LOOP AT i_pr.
MOVE-CORRESPONDING i_pr TO it_item.
APPEND it_item.
CLEAR it_item.
AT END OF sno.
READ TABLE i_pr INDEX sy-tabix.
MOVE-CORRESPONDING i_pr TO it_header.
APPEND it_header.
CLEAR it_header.
ENDAT.
ENDLOOP.
SORT it_header BY sno.
SORT it_item BY sno.
v_rows = sy-srows - 6.
Upload the Data from Internal Table
LOOP AT it_header.
Header Data
PERFORM bdc_dynpro USING 'SAPMM06B' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'EBAN-BEDNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'EBAN-BSART'
it_header-bsart.
PERFORM bdc_field USING 'RM06B-EPSTP'
it_header-epstp.
PERFORM bdc_field USING 'EBAN-KNTTP'
it_header-knttp.
PERFORM bdc_field USING 'RM06B-EEIND'
it_header-eeind.
PERFORM bdc_field USING 'RM06B-LPEIN'
it_header-lpein.
PERFORM bdc_field USING 'EBAN-WERKS'
it_header-werks.
PERFORM bdc_field USING 'EBAN-LGORT'
it_header-lgort.
PERFORM bdc_field USING 'EBAN-EKGRP'
it_header-ekgrp.
PERFORM bdc_field USING 'EBAN-MATKL'
it_header-matkl.
PERFORM bdc_field USING 'EBAN-BEDNR'
it_header-bednr.
PERFORM bdc_field USING 'EBAN-AFNAM'
it_header-afnam.
Item Details
v_l = 0.
To add no. of rows
v_2 = 0 .
As the screen is showing 13 rows defaulted to 130
v_rowno = 130 .
LOOP AT it_item WHERE sno = it_header-sno.
v_l = v_l + 1.
IF v_l = 14 .
IF v_2 = 12 .
v_2 = 12 .
v_l = 2 .
From second time onwards it is displaying 12 rows only
v_rowno = v_rowno + 120 .
PERFORM bdc_dynpro USING 'SAPMM06B' '0106'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RM06B-BNFPO'.
PERFORM bdc_field USING 'RM06B-BNFPO'
v_rowno.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
ELSE.
V_2 initialized to 12 for second screen purpose
v_2 = 12 .
v_l = 2 .
PERFORM bdc_dynpro USING 'SAPMM06B' '0106'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RM06B-BNFPO'.
PERFORM bdc_field USING 'RM06B-BNFPO'
v_rowno .
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
ENDIF.
ENDIF.
PERFORM bdc_dynpro USING 'SAPMM06B' '0106'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
CLEAR v_field.
CONCATENATE 'EBAN-MATNR(' v_l ')' INTO v_field.
PERFORM bdc_field USING v_field it_item-matnr.
CLEAR v_field.
CONCATENATE 'EBAN-MENGE(' v_l ')' INTO v_field.
PERFORM bdc_field USING v_field it_item-menge.
PERFORM bdc_dynpro USING 'SAPMM06B' '0102'.
PERFORM bdc_field USING 'BDC_CURSOR'
'EBAN-PREIS'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'EBAN-PREIS'
it_item-preis.
PERFORM bdc_dynpro USING 'SAPMM06B' '0505'.
PERFORM bdc_field USING 'BDC_CURSOR'
'EBKN-SAKTO'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTE'.
PERFORM bdc_field USING 'EBKN-SAKTO'
it_item-sakto.
Cost Center
PERFORM bdc_dynpro USING 'SAPLKACB' '0002'.
PERFORM bdc_field USING 'BDC_CURSOR'
'COBL-KOSTL'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTE'.
PERFORM bdc_field USING 'COBL-KOSTL'
it_item-kostl.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTE'.
ENDLOOP.
PERFORM bdc_dynpro USING 'SAPMM06B' '0106'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RM06B-BNFPO'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=BU'.
Call The Transaction
PERFORM bdc_transaction USING 'ME51'.
ENDLOOP.
Close the BDC Session
PERFORM close_group.
with regards,
Hema Sundara. -
How to fetch the Table Control data to Customer Table(Z-Table) ?
How to fetch the Table Control data to Customer Table(Z-Table) ?
Hi Krishna,
Check this sample programs
http://www.planetsap.com/online_pgm_main_page.htm
http://sap.niraj.tripod.com/id29.html
http://www.sapdevelopment.co.uk/dialog/tabcontrol/tc_basic.htm
Have a look at below links. It will help you.
http://help.sap.com/saphelp_nw04/helpdata/en/9f/dbac5135c111d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/dbac1d35c111d1829f0000e829fbfe/content.htm
Thanks,
Reward If helpful.
Maybe you are looking for
-
Error while trying to import external web service in webdynpro java
Hi, I am trying to import external webservice in webdynpro java using adaptive webservice model, but i am getting below error..i tried some other external webservices but those are working fine....I wanted to know if there is any issue with this wsdl
-
My daughter and I share the same Apple ID. When she purchases music, it is always on my phone, and vice versa. I donot want her music on my phone. How can I do this without erasing it from her phone as well?
-
Is it a path problem, or what is it?? Please...
Hi every one! I am just trying to open a Serial Port This is my code package demo2; * Titre : * Description : * Copyright : Copyright (c) 2002 * Soci�t� : * @author * @version 1.0 import java.io.*; import java.util.*; import javax.comm.*; public clas
-
Hi There, I have created two data model for my report. The queries have no relation to each other. Is that possible to put both these in one report with same user parameters. or do u have any better suggestion to do this. For Example: select count(*)
-
Hi, Is there a way to setup a threshold for the number of incorrect password attempts during login event? Apreciate any help on this matter! Regards, Nawaf