How to schedule a job to trigger SAP IE send the message
Hi XIer,
Our scenario:
I created a report to use ABAP client proxy to trigger a message in SAP R3. I can see this message has generated in SXMB_MONI in SAP IE(not in XI IE),but the message status is <message released( commit successful )>, but not send, so I go to SMQ2 inbound queue, and execute the message which pending there waiting for trigger. Then the message successful send out.
My question will be: I believe there will be some background job to do this job to trigger the messages lay in the inbound queue, but I don't know which report will do this job, is there any one can give some hits? thank you very much for your time. : )
Hi -
Have you registered the queues on the R/3 side? In SAP R/3's SXMB_ADM-->Manage Queues, then select "Register Queues" and "Execute Action" button.
Shouldn't need to schedule a job to trigger the send.
Regards,
Jin
Similar Messages
-
How to schedule a job in SAP CPS
Hi,
I am new to SAP CPS.
So please tell how to schedule a job in SAP CPS. And which kind of job cam be schedule means BAP report.
Thanks
AnurodhHi,
In the installation and administration guide you'll probably find some examples.
The Job Definition you need is SAP_AbapRun to run any ABAP.
You submit this, specify the parameters as desired, and scheduling information, and that should do the trick.
That is assuming you have already connected CPS to an SAP system.
Check the topics in the docs within the product and on SDN on:
- Connecting to an SAP system
- Submitting Jobs
- SAP_AbapRun
Regards,
Anton. -
How to schedule a job from r3 to BI daily ?
Please let me know how to schedule a job frm bi to r3, that is i want to load data from a sd ds to a sd cube in bi. I do not want to use a PC and can i schedule a job daily without a PC, which can run daily after 10pm ,remember its not a manual schedule. Do we have any option to schedule in hourly, weekly, daily from bi to r3. If yes HOW ? i know we can do it thru infopackage group but will the infopackage group accept if its only a single load....I think it should have multiple infopackage rite to add it to a group or can it b a single job as well.
Edited by: Manohar P on Oct 16, 2008 3:14 PMAn infopackage group can only run infopackages, and unfortunately, you will need an ABAP program to trigger the event in R/3. There is plenty of ABAP code in this forum to show you exactly how to do this.
Try this:
Triggering a Process Chain From R/3 pgm
R/3 Jobs Triggering BW job
You can also review OSS Note 135637. This note will show from R/3 to BI (BW). But you can reverse the logic to go from BI to R/3.
Hope this helps.
My suggestion would be to replace the infopackage group with a process chain, because you can call an ABAP program from a process chain. You also have many more processes at your disposal using process chains. -
How to schedule a job occurring time for 1 1/2 hour in sql server
how to schedule a job occurring time for 1 1/2 hour in sql server
Hi,
This is a known issue in the previous SQL Server version and has been fixed in SQL Server 2012. You should be able to set 90 minutes and the change would be saved in SQL Server 2012.
http://connect.microsoft.com/SQLServer/feedback/details/346786/ssms-does-not-support-job-schedule-frequencies-greater-than-60-minutes
Currently, you may schedule the job to occur every 1 hour or you may refer to the suggestion by Latheesh to get around this.
Thank you for your understanding.
Tracy Cai
TechNet Community Support -
How to schedule dependent job in oracle
I would like to schedule a job which should be dependent on the completion of previous job. How is it achieved in oracle 10g
refer to this examples about DBMS_SCHEDULER.CREATE_CHAIN to form job dependency.
-
How to schedule a job to run twice within a request set?
How to schedule a job to run twice within a request set?
Create one more stage for the same concurrent program.
Thanks
Nagamohan -
How to upload a Flat file into sap database if the file is in Appl'n Server
Hello Sap Experts , Can you tel me
" How to upload a Flat file into sap database if the file is in Application Server.
what is Path for that ?
Plz Tel Me its Urgent
Thanks for allHi,
ABAP code for uploading a TAB delimited file into an internal table. See code below for structures.
*& Report ZUPLOADTAB *
*& Example of Uploading tab delimited file *
REPORT zuploadtab .
PARAMETERS: p_infile LIKE rlgrap-filename
OBLIGATORY DEFAULT '/usr/sap/'..
DATA: ld_file LIKE rlgrap-filename.
*Internal tabe to store upload data
TYPES: BEGIN OF t_record,
name1 like pa0002-VORNA,
name2 like pa0002-name2,
age type i,
END OF t_record.
DATA: it_record TYPE STANDARD TABLE OF t_record INITIAL SIZE 0,
wa_record TYPE t_record.
*Text version of data table
TYPES: begin of t_uploadtxt,
name1(10) type c,
name2(15) type c,
age(5) type c,
end of t_uploadtxt.
DATA: wa_uploadtxt TYPE t_uploadtxt.
*String value to data in initially.
DATA: wa_string(255) type c.
constants: con_tab TYPE x VALUE '09'.
*If you have Unicode check active in program attributes then you will
*need to declare constants as follows:
*class cl_abap_char_utilities definition load.
*constants:
* con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB.
*START-OF-SELECTION
START-OF-SELECTION.
ld_file = p_infile.
OPEN DATASET ld_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
ELSE.
DO.
CLEAR: wa_string, wa_uploadtxt.
READ DATASET ld_file INTO wa_string.
IF sy-subrc NE 0.
EXIT.
ELSE.
SPLIT wa_string AT con_tab INTO wa_uploadtxt-name1
wa_uploadtxt-name2
wa_uploadtxt-age.
MOVE-CORRESPONDING wa_uploadtxt TO wa_upload.
APPEND wa_upload TO it_record.
ENDIF.
ENDDO.
CLOSE DATASET ld_file.
ENDIF.
*END-OF-SELECTION
END-OF-SELECTION.
*!! Text data is now contained within the internal table IT_RECORD
* Display report data for illustration purposes
loop at it_record into wa_record.
write:/ sy-vline,
(10) wa_record-name1, sy-vline,
(10) wa_record-name2, sy-vline,
(10) wa_record-age, sy-vline.
endloop. -
How can i autoforward that mail from SAP INBOX to the outlook
Hi ,
My Requirement is that,
I have to send an email to outlook, whenever PO Created in SRM System
I have created custom workflow, i have added a sendmailtask step, i given the SAP userid to send SAP Mail to the user.
It is sending SAP Mail to the User to his inbox perfectly.
Now, how can i autoforward that mail from SAP INBOX to the outlook. This is has to work for all users.
Please give some suggestions. ot it can be achived any other way.
Note: This is Email Message not a workitem.
I have doubt that RSWW program will work only for workitems.*
Thanks & Regards,
Suresh.Hi ST,
what I understand from your requirement is that you are able to send messages using SendMail Step to SAP Inbox and now you want it to be sent to users Outlook.
Here you need to create a container which would store users email address of Outlook (which would be stored in SU01 or in a ztable), use this container in your Send Mail step and in the Recepient Type as email.
Hope it helps.
Aditya -
How to send the message from front end to XI in sender webservice
Hi All,
I am doing webservice to proxy scenario, we want to send the message from front end to XI, front end is java application. can any one please guide me the steps need to done for front end to XI.
1) we wrote a webservice
2) i have created data type message type and message interface in IR
3) i have created sender soap adapter with interface name and namespace.
4) i have generated webservice in ID
but how can we send the message from front end to XI sender soap adapter.
Kind Regards,
KiranHi,
Before going with the SOAP Adapter i suggest you to go through this Disscussion
Re: about http and soap
If you are going with the SOAP Adapter means
>>but how can we send the message from front end to XI sender soap adapter.
you have to use the XI Server URL( http://host name:j2ee port/
Use this as Refference
http://help.sap.com/saphelp_nw70/helpdata/EN/ae/d03341771b4c0de10000000a1550b0/frameset.htm
Regards
Seshagiri -
I have three iPads and one iPod and one iPhone. How can I message between them without sending the message to all of them. You send the message to your email address but all of them are set up under one account.
You can have a different receiving email in the Messages app on each device : Settings > Messages > Receive At . I'm not sure that there is a different way to have the message only go to one device.
-
I went through all the steps to try to resolve getting the message in a box every time i try to send an e-mail. What next ?
Message is " A copy has been placed in your
Outbox. Sending the message content to the server failed."
Any assistance would be greatly appreciated. My internet works fine as I can send e-mails from my Yahoo account on my MAC no problem.
Address is fine etc.How long has it been going on? I've had my yahoo mess up and if i wait a bit it resolves itself. Yahoo is doing something with their servers and it messes with your mail if your mail happens to be on one of those servers.
-
How do I extract email from a form and send the PDF to that user?
How do I extract email from a form and send the PDF to that user?
here you can add email to send to, CC, Subject, and body message
var oDoc = event.target;
oDoc.mailDoc({
bUI: false,
cTo: "Agency Contact Email",
cCC: "",
cSubject: "Write your title here,
cMsg: "Dear" + AgencyContact + "(" + AgencyContactEmail + ")\nThe student, " + FirstName + " " + LastName + " has applied to work at your agency. Please confirm they can work here blah blah blah.......\n\nThanks.\n\nrespectuflly,\n\nme" -
When I try to send an imessage to my husband using my new 5c it sends the message back to my phone and not to my husband. However i am able to so far send a message to anyone else! How can i fix this?
I am having the same problem and I have tried everything to fix it. Are there any solutions?
-
misplaced my ipad mini , now i have found it how do i enable it . i turned it on and the message read ipad is disabled try again in 22,809.566 minutes , really
Restore it.
-
How can I send the messages in the CANdb file to the hardware(PXI-8464)?
I tried to open a Vector CAN Database (*.dbc) and wanted to transmit the message of the database ,but I do not know how to achieve it ? I want to send the messages of Vector CAN Database (.dbc file) out through the hardware( PXI-8464) of NI device. What confused me now is that I do not know how to read the message of the .dbc file after improting it into labview, also I do not know use what kind of tools to control the progress of reading and sending. Because some part of the .dbc file is blank and needed to be filled from the Labview front pannel , so the connection between the control (on the front pannel)and the .dbc file has to be setup, further more, I do not know how to make that out . For example,if a message in the .dbc file has a value table for a message, such as message 'SwitchStatus' that shows a 0 = open and 1 = closed, is there a way to read this value table into Labview and send it to the hardware( PXI-8464) of NI device.
Hi
I have tried it according to your help, but the message can not be recieved by CANoe. WHY?
Look forward to your reply.
Regards
Vivian
Maybe you are looking for
-
How do I retrieve lost album and artist info in my music library?
In trying to add an album just purchased from itunes onto my ipod, for some reason the album shows up in my library but will not sync to the ipod adn I get a sync error. After resetting the ipod numerous times, I found advice online that suggested t
-
OBJECTS_OBJREF_NOT_ASSIGNED_NO error when accessing some links in DOE
Hello Everyone, We have setup a Development system for R&D on SAP NW Mobile 7.1 SPS08. I'm able to register mobile devices (Laptop) in DOE but when I'm trying to access few links (like Administration-->Device Administration) I'm getting error
-
Help mee....itunes wont start
The other day I upgraded to itunes6.It wouldnt open so i looked around this website and found out how to fix it. So i fixed it and eveyrthing was fine but when i went to go open itunes again it wouldn't open. Now it wont open at all when i click on i
-
Acrobat 9.5 pro keeps opening Windows installation window when clicked on icon.
Opens normally PDF documents. And the fix is ...?
-
ADDT Dynamic List with Session Variable?
I've created a dynamic list using ADDT. When a member logs into the site I want the member to see only his or her specific information in this list. How do I create a session variable that allows only the logged in member to see there specific inform