How to select data in setup tables based on date

hello gurus,
I have a question . I want to fill the setup tables but not complete historical data. I need to fill it based on some date selection.Can anyone help me the process. I went to oli9bw but i cannot see any option like date range for data selection...... i.e., I need to extract a subset of data from ecc to bw.
Thanks a lot

Hi Sandeep,
While filling Setup tables we won't have any selection(It loads all historical data), when you run the IP to load data to BW.follow the below 2 cases.
1)If you require further delta loads on this, run the full load based on your date selections.then create another IP for delta,run "init without data transfer" as option in Update tab of IP.
2)If you don't require any delta further, simply run Full load with date selections.
Hope this helps.
Regards,
Venkatesh.

Similar Messages

How to fill setup table based on date???

Hi Experts,
I need to do repair full request for 2lis_11_vaitm datasource, I want to load from 1st Apr 2008 to 31st March 2009, but in OLI7BW t-code i am unable to find date field in selection screen.
1) How can I fill setup table based on date?
2) In RSA7 containing records even though is it possible to fill setup table ?
Helpful answer will be appreciated with points,
Thanks in advance,
Venakt.

Venkata,
1) How can I fill setup table based on date?
--> If date not possible then try to setup with available options/characteristics.
--> While pulling into BW, extract data selectively. Give date selection at infopcakge.
2) In RSA7 containing records even though is it possible to fill setup table ?
--> Yes, you can do it.
Srini

How to SELECT * into a SQL table incremntally by date?

I have a SQL Server table called "tblProducts".
Sometimes I backup this table by making a copy of it with this simple query:
SELECT *
INTO [test01].[dbo].[tblProducts_20141206]
FROM [test01].[dbo].[tblProducts]
Every time when making a backup, the date is included in the table name.
I would like to create a SQL Job that runs this kind of query once every week.
Is it possible to maybe in a stored procedure or declaring a variable to achieve this that allows the backed-up table name to be named like [tblProducts_todaysDate]?
Thanks.

hi ,dchencm
i just want to point out the some bad effect of this pratice
first point is
when your db has be corrupt，your backup out of work
i think you should backup your table to other db ensure that when your db has be corrupt you still have real backup
just like
SELECT *
INTO [test01_backup].[dbo].[tblProducts_20141206]
FROM [test01].[dbo].[tblProducts]
another point is your pratice is total amount of backup not incremental backup
when your table become bigger and bigger ,and then the number of record reach several million or several ten million or several hundred million, you must import all data the table have
so, this is not a good idea
i just suggest apply replication or logshipping etc to copy the diff data the table proceded is the better
the steps of detail as following
step 1
USE [test01]
GO
/****** 对象: StoredProcedure [dbo].[sp_ImportBackupData] 脚本日期: 12/25/2010 16:47:49 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE PROCEDURE [dbo].[sp_importbackupdata]
AS
BEGIN
BEGIN
DECLARE @date DATETIME ,
@sql VARCHAR(1000)
SET @date = GETDATE()
SET @sql = 'SELECT * INTO [test01].[dbo].[tblProducts_'
+ CONVERT(VARCHAR(8), @date, 112)
+ '] FROM [test01].[dbo].[tblProducts]'
EXEC (@Sql)
END
END
step 2
USE [msdb]
GO
/****** 对象: Job [import data] 脚本日期: 02/22/2011 09:22:44 ******/
BEGIN TRANSACTION
DECLARE @ReturnCode INT
SELECT @ReturnCode = 0
/****** 对象: JobCategory [Database Engine Tuning Advisor] 脚本日期: 02/22/2011 09:22:44 ******/
IF NOT EXISTS (SELECT name FROM msdb.dbo.syscategories WHERE name=N'Database Engine Tuning Advisor' AND category_class=1)
BEGIN
EXEC @ReturnCode = msdb.dbo.sp_add_category @class=N'JOB', @type=N'LOCAL', @name=N'Database Engine Tuning Advisor'
IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback
END
DECLARE @jobId BINARY(16)
EXEC @ReturnCode = msdb.dbo.sp_add_job @job_name=N'sp_importbackupdata',
@enabled=1,
@notify_level_eventlog=0,
@notify_level_email=0,
@notify_level_netsend=0,
@notify_level_page=0,
@delete_level=0,
@description=N'sp_importbackupdata',
@category_name=N'Database Engine Tuning Advisor',
@owner_login_name=N'sa', @job_id = @jobId OUTPUT
IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback
/****** 对象: Step [import data] 脚本日期: 02/22/2011 09:22:44 ******/
EXEC @ReturnCode = msdb.dbo.sp_add_jobstep @job_id=@jobId, @step_name=N'import data',
@step_id=1,
@cmdexec_success_code=0,
@on_success_action=1,
@on_success_step_id=0,
@on_fail_action=2,
@on_fail_step_id=0,
@retry_attempts=0,
@retry_interval=0,
@os_run_priority=0, @subsystem=N'TSQL',
@command=N'exec sp_importbackupdata',
@database_name=N'sss',
@flags=0
IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback
EXEC @ReturnCode = msdb.dbo.sp_update_job @job_id = @jobId, @start_step_id = 1
IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback
EXEC @ReturnCode = msdb.dbo.sp_add_jobschedule @job_id=@jobId, @name=N'import frequency',
@enabled=1,
@freq_type=8,
@freq_interval=2,
@freq_subday_type=1,
@freq_recurrence_factor=1,
@active_start_time=20000
IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback
EXEC @ReturnCode = msdb.dbo.sp_add_jobserver @job_id = @jobId, @server_name = N'(local)'
IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback
COMMIT TRANSACTION
GOTO EndSave
QuitWithRollback:
IF (@@TRANCOUNT > 0) ROLLBACK TRANSACTION
EndSave:
the schedule time is 2 am in the midnight every monday
Certainly， you can edit it for yourself

Data in setup tables and qued delta

Hi Samuris'
How can I see 1. the data in setup tables 2. Data in qued delta
3.From which table(in R/3) the data is extracted when we schedule a IP for a delta.
Do we have any transaction code to view 1,2.
Could anyone let me know exact flow of data when a request is raised from BW.I mean if it is a full load request,from which table in R/3, data gets captured.Also if it is delta load request,from which table in R/3, data gets captured.
Any help is appreciated,
Thanks in Advance!
James

Hi,
first it depends on the data source....
I guess you are talking about LO DSources.
1. you can open the table itself (usually MCaax_SETUP, e.g MC03BF0SETUP) but this will be raw data, like in a trfc LUW); otherwise call transaction RSA3 with your LO datasource in full mode and you'll see the data as it will be extracted to BW.
2 call SMQ1, double click MCEX03 for instance, again the queue name in the next screen, you'll see pending transactions (LUWS) to be updated in the BW delta queue, double clicking the TID will lead you to the data in the transaction...
The corresponding table is ARFCSDATA and it is populated when, in our example, a material document is commited.
3. it depends on your DSource: LO datasources will take their data from ARFCSDATA, other might extract their data directly from several DB tables...
hope this helps...
Olivier.
Message was edited by:
Olivier Cora

How to select data from a table using a date field in the where condition?

How to select data from a table using a date field in the where condition?
For eg:
data itab like equk occurs 0 with header line.
select * from equk into table itab where werks = 'C001'
and bdatu = '31129999'.
thanks.

Hi Ramesh,
Specify the date format as YYYYMMDD in where condition.
Dates are internally stored in SAP as YYYYMMDD only.
Change your date format in WHERE condition as follows.
data itab like equk occurs 0 with header line.
select * from equk into table itab where werks = 'C001'
and bdatu = <b>'99991231'.</b>
I doubt check your data base table EQUK on this date for the existince of data.
Otherwise, just change the conidition on BDATU like below to see all entries prior to this date.
data itab like equk occurs 0 with header line.
select * from equk into table itab where werks = 'C001'
and <b> bdatu <= '99991231'.</b>
Thanks,
Vinay
Thanks,
Vinay

How to display data from a recordset based on data from another recordset

How to display data from a recordset based on data from
another recordset.
What I would like to do is as follows:
I have a fantasy hockey league website. For each team I have
a team page (clubhouse) which is generated using PHP/MySQL. The one
area I would like to clean up is the displaying of the divisional
standings on the right side. As of right now, I use a URL variable
(division = id2) to grab the needed data, which works ok. What I
want to do is clean up the url abit.
So far the url is
clubhouse.php?team=Wings&id=DET&id2=Pacific, in the end all
I want is clubhouse.php?team=Wings.
I have a separate table, that has the teams entire
information (full team name, short team, abbreviation, conference,
division, etc. so I was thinking if I could somehow do this:
Recordset Team Info is filtered using URL variable team
(short team). Based on what team equals, it would then insert this
variable into the Divisional Standings recordset.
So example: If I type in clubhouse.php?team=Wings, the Team
Info recordset would bring up the Pacific division. Then 'Pacific'
would be inserted into the Divisional Standings recordset to
display the Pacific Division Standings.
Basically I want this
SELECT *
FROM standings
WHERE division = <teaminfo.division>
ORDER BY pts DESC
Could someone help me, thank you.

Assuming two tables- teamtable and standings:
teamtable - which has entire info about the team and has a
field called
"div" which has the division name say "pacific" and you want
to use this
name to get corresponding details from the other table.
standings - which has a field called "division" which you
want to use to
give the standings
SELECT * FROM standings AS st, teamtable AS t
WHERE st.division = t.div
ORDER BY pts DESC
Instead of * you could be specific on what fields you want to
select ..
something like
SELECT st.id AS id, st.position AS position, st.teamname AS
team
You cannot lose until you give up !!!
"Leburn98" <[email protected]> wrote in
message
news:[email protected]...
> How to display data from a recordset based on data from
another recordset.
>
> What I would like to do is as follows:
>
> I have a fantasy hockey league website. For each team I
have a team page
> (clubhouse) which is generated using PHP/MySQL. The one
area I would like
> to
> clean up is the displaying of the divisional standings
on the right side.
> As of
> right now, I use a URL variable (division = id2) to grab
the needed data,
> which
> works ok. What I want to do is clean up the url abit.
>
> So far the url is
clubhouse.php?team=Wings&id=DET&id2=Pacific, in the end
> all
> I want is clubhouse.php?team=Wings.
>
> I have a separate table, that has the teams entire
information (full team
> name, short team, abbreviation, conference, division,
etc. so I was
> thinking if
> I could somehow do this:
>
> Recordset Team Info is filtered using URL variable team
(short team).
> Based on
> what team equals, it would then insert this variable
into the Divisional
> Standings recordset.
>
> So example: If I type in clubhouse.php?team=Wings, the
Team Info recordset
> would bring up the Pacific division. Then 'Pacific'
would be inserted into
> the
> Divisional Standings recordset to display the Pacific
Division Standings.
>
> Basically I want this
>
> SELECT *
> FROM standings
> WHERE division = <teaminfo.division>
> ORDER BY pts DESC
>
> Could someone help me, thank you.
>

How to select columns in a table by their column id and not the column name

Hello,
How do you select columns from a table based on their column_id.
I have create a view
but other than Select * , i cant now select one just one column from it
the view as follow:
create view count_student as
select a.acode "acode",aname "Activity Name",count(ae.acode) "Number of student joined"
from aenrol ae, activity a
where a.acode= ae.acode
group by a.acode,aname;

The issue is that you have decided to use quoted column names. A pretty horrible idea (mostly for the reasons that you are now finding).
Re-create the view and get rid of the silly double quotes.

How to process data in the past based from data in the present

hello guys,
i have a problem in my labview programs. how to process data in the past based from data in the present ?
i have a formula self-organizing maps
this formula is looking for D1, D1 is neuron index that will be searched for the smallest value.and the result are D1=2 ,D2=5, D3=17 from calculating with formula .it means the smallest value is 2, "2" from weight [2 2] in file attached.
and then it will be in other formula
it mean [2 2] + 0.5 ( [1 1]-[2 2] ) = [1.5 1.5]
and the weight will be [1.5 2 2 ] in matrix
1.5 3 5
I would appreciate any input/help on solving this
thanks
Attachments:
dika.vi ‏16 KB
weight.txt ‏1 KB
data .txt ‏1 KB

Hi Ronny Hanks,
Moving your records from internal table into the database table depends upon various scenarios :-
1. If you use INSERT statement.
INSERT <database_table> FROM TABLE <internal_table>.
But in this case, you need to make sure that you don't have any duplicate entries in your internal table that violates data entry into database table, else you will get a dump.
INSERT <database_table> FROM TABLE <internal_table> ACCEPTING DUPLICATE KEYS.
In this case, you are forcefully inserting duplicate records into your database table which may lead to data redundancy in your database table.
2. If you use UPDATE statement.
UPDATE <database_table> FROM TABLE <internal_table>.
This will update the existing records in your database table from the internal table.
3. If you use MODIFY statement.
MODIFY <database_table> FROM TABLE <internal_table>.
This statement works both in combination of INSERT & UPDATE statements.
Existing records (in database table) will be eventually updated/modified and new records (not in database table currently) will be successfully inserted into the database table.
Hope this solves your problem.
Thanks & Regards.
Tarun Gambhir.

How to get the most current file based on date and time stamp using SSIS?

Hello,
Let us assume that files get copied in a specific directory. We need to pick up a file and load data. Can you guys let me know how to get the most current file based on date and time stamp using SSIS?
Thanks
thx regards dinesh vv

hi simon
i excuted this script it is giving error..
   Microsoft SQL Server Integration Services Script Task
   Write scripts using Microsoft Visual C# 2008.
   The ScriptMain is the entry point class of the script.
using System;
using System.Data;
using Microsoft.SqlServer.Dts.Runtime;
using System.Windows.Forms;
namespace ST_9a6d985a04b249c2addd766b58fee890.csproj
    [System.AddIn.AddIn("ScriptMain", Version = "1.0", Publisher = "", Description = "")]
    public partial class ScriptMain : Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTARTScriptObjectModelBase
        #region VSTA generated code
        enum ScriptResults
            Success = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Success,
            Failure = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Failure
        #endregion
       The execution engine calls this method when the task executes.
       To access the object model, use the Dts property. Connections, variables, events,
       and logging features are available as members of the Dts property as shown in the following examples.
       To reference a variable, call Dts.Variables["MyCaseSensitiveVariableName"].Value;
       To post a log entry, call Dts.Log("This is my log text", 999, null);
       To fire an event, call Dts.Events.FireInformation(99, "test", "hit the help message", "", 0, true);
       To use the connections collection use something like the following:
       ConnectionManager cm = Dts.Connections.Add("OLEDB");
       cm.ConnectionString = "Data Source=localhost;Initial Catalog=AdventureWorks;Provider=SQLNCLI10;Integrated Security=SSPI;Auto Translate=False;";
       Before returning from this method, set the value of Dts.TaskResult to indicate success or failure.
       To open Help, press F1.
        public void Main()
            string file = Dts.Variables["User::FolderName"].Value.ToString();
            string[] files = System.IO.Directory.GetFiles(Dts.Variables["User::FolderName"].Value.ToString());
            System.IO.FileInfo finf;
            DateTime currentDate = new DateTime();
            string lastFile = string.Empty;
            foreach (string f in files)
                finf = new System.IO.FileInfo(f);
                if (finf.CreationTime >= currentDate)
                    currentDate = finf.CreationTime;
                    lastFile = f;
            Dts.Variables["User::LastFile"].Value = lastFile;
            Dts.TaskResult = (int)ScriptResults.Success;
thx regards dinesh vv

How to fetch data from CDHDR Table based on Order Number

Hi,
I need to fetch the data from CDHDR just based on the Order number .I found there is a field called 'OBJECTID' in table 'CDHDR'. But the last part of OBJECTID contains order number.suppose my order number is 90506210 the objectid field contains '51030000090506210'.510 is login client,don't know what 30 is and last part is order number i.e 000090506210.i have to concatenate all and fetch data .i can do it for one order number but here order number is declared as select-options.how do i ?
HERE IS THE CODE FOR ONE ORDER NUMBER.HOW CAN DO FOR RANGE OF ORDER NUMBERS.
PARAMETER : S_OBJECT FOR /BEV1/RBVBAK-AUFNR OBLIGATORY.
DATA : IT_CDHDR TYPE STANDARD TABLE OF CDHDR WITH HEADER LINE,
             WA_CDHDR LIKE LINE OF IT_CDHDR,
             S_OBJECT1 LIKE CDHDR-OBJECTID.
CONCATENATE sy-mandt '30' S_OBJECT INTO S_OBJECT1.
SELECT * FROM CDHDR INTO TABLE IT_CDHDR WHERE OBJECTID = S_OBJECT1.

P838355 wrote:>
> Hi,
> I need to fetch the data from CDHDR just based on the Order number .I found there is a field called 'OBJECTID' in table 'CDHDR'. But the last part of OBJECTID contains order number.suppose my order number is 90506210 the objectid field contains '51030000090506210'.510 is login client,don't know what 30 is and last part is order number i.e 000090506210.i have to concatenate all and fetch data .i can do it for one order number but here order number is declared as select-options.how do i ?
>
> HERE IS THE CODE FOR ONE ORDER NUMBER.HOW CAN DO FOR RANGE OF ORDER NUMBERS.
>
>
> PARAMETER : S_OBJECT FOR /BEV1/RBVBAK-AUFNR OBLIGATORY.
>
> DATA : IT_CDHDR TYPE STANDARD TABLE OF CDHDR WITH HEADER LINE,
>              WA_CDHDR LIKE LINE OF IT_CDHDR,
>              S_OBJECT1 LIKE CDHDR-OBJECTID.
>
> CONCATENATE sy-mandt '30' S_OBJECT INTO S_OBJECT1.
>
> SELECT * FROM CDHDR INTO TABLE IT_CDHDR WHERE OBJECTID = S_OBJECT1.
You need to loop through the select option and concatenate with required data then select using 'in' instead of equal or select one by one.
or
select sales order numbers from VBAK for the selection into internal table then loop through the internal table and concatenate then select from CDHDR.
for better performance use objectclass in where clause. the value for sales order for objectclass is VERKBELEG.
in my system the object id is just an order number there is no other additions to it but in CDPOS the tabkey contains the order number with client and other information also.
the 30 may be your item number... check it
go ahead and change sales order and see what you can find in CDHDR
Good luck
Edited by: Sampath Kumar on Oct 21, 2009 9:02 AM

To select from database table based on date range

hi
i have a selection screen in which date range is being given
say eg 23/06/07 to 23/12/08
based on this date i want to select data from a ztable
eg i want to select a field amount from table
and three is a field date range on the table
for this particular field i want to select all records for amount field and factual field falling wiithing this date range and sum it
eg
based on date range as in selcetion screen
select amount( field1) factual ( field2) from ztable into it_ztable where date = ?....
please give me code for it and how to sum all values as i will get from the ztable into internal table the two values as fetched from the ztable
please suggest asap
regards
arora

hi
i am using
sELECT field1 field2 FROM Ztable INto it_matu
where DATE GE sl_dat-low
AND DATE LE sl_dat-high.
i am getting data in internal table but
say i have twelve records now i want to sum it the both the columns into and use that sum final amount to display
let me know how to use sume in the intrranal tabl do i need to use control statement
how to use the sum for two columns and take into a serperate variable to display
regards
aRora

ABAP Webdynpro - Populating second table based on data selected on first

Hi Experts,
I am new to ABAP Webdynpro. I have a requirement to show a search area, one table for header info, and second table for populating item level information.
I was successful building a search area and populating first table when the 'Search' button is pressed.
Now, I like to populate the second table with item details if a row on first table is selected. I tried to bind the OnSelect Event of first table to a method and try to get the results and bind to second table.. However, I am unsuccessful in this attempt.
Here are my questions/challenges.
1. When I select a row on first table, how can I extract the key information?
2. Is it sufficient to create a context attribute and populate it with FM and bind that with second table?
I appreciate your help in answering this question.
Thanks,
SG

Hi,
Regarding...
1. When I select a row on first table, how can I extract the key information?
When you select any row in table, a lead selection will be set in the node which bound to the table.
To read this selected record you need to use the following code. Here the name of context node is "FLAGS". And the structure ls_flags contains all the attributes defined in the node.
DATA lo_nd_flags TYPE REF TO if_wd_context_node.
DATA ls_flags TYPE wd_this->element_flags.
lo_nd_flags = wd_context->get_child_node( name = wd_this->wdctx_flags ).
CALL METHOD lo_nd_flags->get_static_attributes
    IMPORTING
      static_attributes = ls_flags.
Regarding....
2. Is it sufficient to create a context attribute and populate it with FM and bind that with second table?
Based on the data that you got in the first step, you can fill an internal table with data that needs to be displayed in 2nd table.
To bind the internal table you need to define the internal table of type context node. Use the following code to bind the internal table to context node which bound to 2nd table. Here name of the context node is "OVERVIEW".
DATA: lo_nd_overview TYPE REF TO if_wd_context_node,
            lt_overview TYPE wd_this->elements_overview.
<<<< Fill lt_overview with data >>>>>
        lo_nd_overview = wd_context->get_child_node( name = wd_this->wdctx_overview ).
        CALL METHOD lo_nd_overview->bind_table
          EXPORTING
            new_items            = lt_overview.
Alternatively you can use the Supply Function Method.
Vikrant Trivedi

How to select from multiple output tables in the SAP Data Source

Hi,
We're using the SAP Data Source to display SAP data in our portal from the Bapi: BAPI_INFORECORD_GETLIST. When defining the Bapi Meta Data we can select data from one of the two output tables (INFORECORD_GENERAL and INFORECORD_PURCHORG). But we want to select data from both tables (some columns we want to show are in INFORECORD_GENERAL and some are in INFORECORD_PURCHORG) .
How can we do this ?
With regards,
Ramon van der Weiden

You can query multiple TimesTen databases, but your original question was about joining tables from two databases, which is not supported.
Using Cache Connect to Oracle to query an Oracle database is not distributed. It's still one single Oracle database you are querying. You cannot join a table in the TimesTen database with a table in the Oracle database, this is not allowed.
If you are willing to share your business requiremens, we can take a look and see what solution might work for you. Would you like to discuss this offline?
Susan

How to fetch a data form root table based on values of dependent table?

My Dependent Table.
EmpId
projectId
Object Name
Object Type
Object Description
My Root Table:
projectId
Project Name
Project Description
Project Duration
Project Manager
starting date
the above are my 2 tables . if search with an object name i should get the name of all the projects related to that . how do i achieve this SAPUI5

REPORT YCHATEST .
tables : mara.
data : begin of itab occurs 0.
include STRUCTURE mara.
data: end of itab.
select * from mara into table itab where matnr like 'S%'.

How to get a block of data from internal table based on a criteria

Hi all,
I have some records in the internal table t_int1. I want to retrieve some set records from that table and put them all in some other table, based on a single field which is not a key. Can i use READ statement to achieve this.
Could you please let me know any simple way of doin this.
Regards,
Vishnu

I have some records in the internal table t_int1. I want to retrieve some set records from that table and put them all in some other table, based on a single field which is not a key. Can i use READ statement to achieve this.
Could you please let me know any simple way of doin this.
Answer :
data:
itab2 like standard table of t_int1 with header line.
Loop at t_int1.
read table t_int1 with index 1.
check ur condition----
check each line and insert it ---work out the syntax for this
IF t_int1-xyz = data1
append line of t_int1 to itab2. or try insert
cnt = cnt + 1 -
u will get no. of records added to next itab.
else.
cnt1 = cnt1 + 1 -
u will get no. of records not added to next itab.
endif.
end loop.

How to select data in setup tables based on date

Similar Messages

Maybe you are looking for