How to send logic 0,logic 1 to labview wirelessly?

hi all,
I'm a starter of labview.
Now what I am trying to do is to build a button, and when a person pressed the button, the labview can receive logic 1 as "true".
I know that this kind of communication from the button to labview can be done by using serial port, but for my case, I want it to be wireless, which means the button signal can be sent to labview without wire.
The medium between the button and labview is ZigBee.
Does anyone know how to do it?
Solved!
Go to Solution.

Hi nope,
the question is: What kind of ZigBee receiver do you want to use?
LabVIEW is a programming language, not a kind of hardware to receive WiFi signals...
Once you sort out the required hardware you can determine the (PC) port to get the signal into the computer. LabVIEW is able to access (nearly) all ports of a standard PC...
@muks:
Don't you think a whitepaper on testing ZigBee transceivers is kind of overkill for this request?
Message Edited by GerdW on 06-14-2010 08:21 AM
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Similar Messages

How to send in for logic board / HD repair?

Not long before my trial AppleCare expired, my MacBook Pro started doing very strange things, freezing, crashing, making grinding noises, etc. After reporting the results of Disk Utility and a hardware scan to AppleCare, they gave me a case number and said that I most likely needed both a logic board replacement and a hard drive replacement, and that if I had further trouble, to take it in for repair.
Well, the local Apple Store's Genius Bar has been entirely booked up for two days now, and as my AppleCare trial has expired (though I'm under warrantee), I can't call Apple about it.
Can I simply walk in and drop it off? Do I mail it to Apple myself? I've never had to send a machine in to Apple, but it's seemingly not as straightforward as I thought.... how long might I expect my turnaround time to be?
MacBook Pro, 2Ghz Mac OS X (10.4.7) {dying fast}

... as my AppleCare trial has expired (though I'm under warrantee), I can't call Apple about it.
There's really nothing "trial" about it, although I can see how it could be perceived that way. What expired was your 90 days of free phone support for any issue with your MBP, but since, as you know, you still have a one year hardware warranty, you still have free phone support for warranted hardware issues.
See Is phone support and warranty service free? for details.
As Kappy indicates, it's a very straightforward process. If Apple determines that you do have a hardware defect, they'll arrange for a shipper to drop off a shipping box and take it away when you've packed your MBP, and then they'll ship it back to your door when the repair is complete.

How to send keysrokes to dos via labview 7.1?

Hi,
i have an application in which i am calling a 3 rd party software ( which is a dos application) via labVIEW using system exec commnand . now in the dos application the user needs to press keyboard (ex:T for testing the dos application and Q for quitting the application). now the task is to automatically press T (via programme) and same for any alphabet required as soon as dos programme is called.. this application is used in production line so opreator intervention to keyboard must be avoided. Can u please help me solve this problem.

Try the VI posted in this response.

When running a "stand-alone" APP..how do I send midi from Logic?

Hi all,
When running a "stand-alone" APP..how do I send midi from Logic?.....Please no IAC stuff it doesn't work.......thanx
SvK

using IAC here no problems. works very well.
you can host your au's in another app such as soundflower or au lab, but you are still going to need to get it to hear midi. you can use physical midi ports with something like a MTP midi interface, and getting the midi by routing the out of one port to the in of another (midi loop) but you have to be careful logic doesn't listen to the same midi signal or everything will jam up (midi feedback).

Sending audio from logic to external hardware effects, and back into Logic

Hi,
I am currently trying to send audio from Logic to external hardware effects and then record this back into Logic.
My audio interface is a Edirol UA-25 which has only two outputs '1 and 2'.
I understand that I could create an 'aggregate device' which would create two more ins + outs being '3 & 4'.
I also understand that would need to use the Logic I/O plug in configuring this routing.
When treating the audio via the external hardware I particularly only want to hear the audio being processed and not the original 'uneffected' signal.
Can someone please explain if I am able to do all of this with just the UA-25, and if so, then how.
Cheers,
Mr Rock

You connect output 1 of your interface to your active speaker.
You connect output 2 of your interface to the input of your external effect.
You connect the output of your external effect to input 2 of your interface.
You route your track in Logic to output 2.
You create a new track.
You route this new track to output 1 and output 1 only.
You choose input 2 as the source for this track.
You arm the track.
You hit Record.
You hit Stop some time later.
Christian

How do you identify the Logical system in start routine of a transformation

My scenario is this. I have five r3 systems that I am extracting from. In the start routine of the transformation from the r3 data source to my data store I am going to delete data and I need to know the source system id. How do I identify the logical system or source system id in the transformation. Is there a system field that contains this information. I do not want to hard code the source system id in the routine.

hi
have a lool at tables rsreqdone and rsbkrequest with a join you should be able to determine the source.
regards
Boujema
How to give points: Mark your thread as a question while creating it. In the answers you get, you can assign the points by clicking on the stars to the left. You also get a point yourself for rewarding (one per thread).
Edited by: Boujema Bouhazama on May 9, 2008 12:04 AM

How to get the current logical system?

Dear Abapers:
I can't find the logical system value from the table SYST, pls tell me how to get the current logical system name, Thanks!

Hi,
Check with the table T000, the Logical system field name is LOGSYS.
Regards
Thiru

How to send IP pacekts by LabVIEW RT

In a project,I use PXT RT controler and cRIO , need send IP packets to communicate with other PCs.
I can use raw socket to send IP packets on the Windows,how to send IP pacekts on the Pharlap and Vxworks by by LabVIEW RT?
There is somebody can help me ,thank you very much.

Different methods of communicating between a VI on a Real-time target (RT PXI, cRIO) and a VI on Windows are outlined in Real-Time VI to Host VI Communication Methods. One of them is TCP communication, which sounds like the solution you're looking for (there are examples in the Example Finder). However, if you can get away with using shared variables, I'd recommend using them out of simplicity (you can flatten and unflatten to/from string or variant data types if necessary).
Good luck!
Misha

How to implement this complex logic on rpd

How to implement following sql logic on OBIEE 10g RPD...whole thing to be implemented as single column on presentation layer.
to calculate numerator===
select sum(flag) as ap_account_no,exp from
(select a.invoice_id as invid,a.payment_no, max(a.payment_dt) as payment_dt,max(a.due_dt) as due_dt,b.expenditure_type as exp,
case when max(a.due_dt)+ 3 > max(a.payment_dt)
then 1
else 0
end As Flag
from Supplier_inv_pymt_map a, po_invoice_map b
where a.invoice_id= b.invoice_id and a.invoice_dt!=a.due_dt and a.usd_gross_AMOUNT >0 and a.PAYMENT_STATUS!='VOIDED' and to_char(a.payment_dt,'MON-YYYY')='JUN-2011'
group by a.invoice_id, a.payment_no,b.expenditure_type) GROUP BY exp
to calculate denominator===
select count(invid),exp from
(select a.invoice_id as invid,a.payment_no, max(a.payment_dt) as payment_dt,max(a.due_dt) as due_dt, b.expenditure_type as exp
from Supplier_inv_pymt_map a, po_invoice_map b
where a.invoice_id= b.invoice_id and a.invoice_dt!=a.due_dt and a.usd_gross_AMOUNT >0 and a.PAYMENT_STATUS!='VOIDED' and to_char(a.payment_dt,'MON-YYYY')='JUN-2011'
group by a.invoice_id, a.payment_no,b.expenditure_type) GROUP BY exp
tables n column used in sql r available on physical layer....
can anyone help

Hi
if you don't want to aggregate try to define a user function
analytic_sum($(value))
implémented by
sum($(value))
after that
replace your
sum(NOTICES) over ( partition by property order by RELAVANTDATE range between interval '30' day preceding and current row)
by
analytic_sum(NOTICES) over ( partition by property order by RELAVANTDATE range between interval '30' day preceding and current row)

How to implement this aggregate logic at target column in odi inteface mapp

sum(NOTICES) over ( partition by property order by RELAVANTDATE range between interval '30' day preceding and current row)
how to implement this aggregate logic at target column in odi inteface mappings

Hi
if you don't want to aggregate try to define a user function
analytic_sum($(value))
implémented by
sum($(value))
after that
replace your
sum(NOTICES) over ( partition by property order by RELAVANTDATE range between interval '30' day preceding and current row)
by
analytic_sum(NOTICES) over ( partition by property order by RELAVANTDATE range between interval '30' day preceding and current row)

Hardware compressor and am not quite sure how to use it in logic express 9. Please help???

I recently bought a dbx hardware compressor and am not quite sure how to use it in logic express 9. I hav a focusrite saffire 6 usb audio interface and am not sure how to use it in logic. Please help???

Hi Ujjawal,
Use the Tab-order property of IR object.
In design mode, select the any command button, right click and select the property. you will find the window for "Tab-Order". It lists all the objects available in that dashboard. Here you can arrange the tab order..
Hope it will help you.
Thanks & Regards,
Mohit Jain

I recently bought a dbx hardware compressor and am not quite sure how to use it in logic express 9. I hav a focusrite saffire 6 usb audio interface and am not dont how to use it in logic. Please help???

I recently bought a dbx hardware compressor and am not quite sure how to use it in logic express 9. I hav a focusrite saffire 6 usb audio interface and am not dont how to use it in logic. Please help???

MUYconfundido wrote:
Pancenter,
Thanks for the response, but I do not have a midi interface. I am using a midi to usb connector cable, thus bypassing the need for a Midi interface.
The Mac reads the USB cable as a midi device, but not the keyboard that I am trying to use as a controller. I have tried it with my korg sp 300 and with my Nord Electro 2.
Thoughts?
Thanks,
Tristan
Tristan...
This is what you have, correct?
http://www.alesis.com/usbmidicable
This from Alesis..
"The AudioLink Series USB cable receives and outputs MIDI signal thanks to its internal interface. The USB-MIDI Cable connects plug-and-play to your Mac or PC for an all-in-one USB-MIDI solution."
Notice, -internal interface-. What you have is a simple USB MIDI Interface. Most MIDI interfaces are USB.
My point is (was), MIDI OUT of the Korg goes to the connector marked MIDI IN on the Alesis, those new to MIDI often get this wrong.
pancenter-

How to master audio file handling? Where is the logic of Logic?

1. How can I master where to save my logic project files including audio?
2. I want to save a project as a template WITHOUT the recorded track files. When I open the new template I dont want to have all old audio in my "media"browser inside Logic! How?
3. I have one old project with a lot of audio of which only a few are used, yet when I try the cleanup function only a few are erased. Why?
4. How to save a project so that ALL the files used are saved inside that project folder. In Protools and Cubase you can erase all material you dont use.
5. I want to have all my audio saved in ONE project folder but they end up scattered somewhere else, what to do?
I can never get used to the apple/logic sense of file structure. Crazy! Where is the logic of Logic? /Helpless to the logic of Logic 8

Hi
If I understand the problem correctly?
jrm1 wrote:
The possible issue concerns the start of the audio files.
I recorded the tracks down to a stereo file, a region, that appears to start in the arrange at the correct point. But when you record, Logic includes some recording before the start of the region, before the Anchor, correct?
This can depend on how you did the "record down to a stereo file".
If you routed tracks to bus channels, then recorded the bus to another track, Logic will include the count-in in the audio file. As you say, the region in the Arrange will be correctly "trimmed".
One solution would be to convert these bounced regions to new audio files (Audio Menu), another to use Bounce Region (or track) in Place.
Alternatively, use a manually placed "2 pop" 2 seconds before the start of each cue.
CCT

How to view the code/logic for the built-in oracle functions

Hi,
How can we view the logic behind the oracle supplied built-in functions like LAST_DAY , MONTHS_BETWEEN etc.,
I tried to view the same using the sys.STANDARD package , the observations are given below
function LAST_DAY(RIGHT DATE) return DATE;
pragma BUILTIN('LAST_DAY',38, 12, 12); -- PEMS_DATE, DATE_LAST_DAY
pragma FIPSFLAG('LAST_DAY', 1450);
Regards
Lok

How can we view the logic behind the oracle supplied built-in functions like LAST_DAY , MONTHS_BETWEEN etc., You cannot. These built-ins, are 'built-in'.... As far as I know they are implemented in Oracle's kernel, as C code.

How can i know my logic pro 9 is for 3 install's?

how can i know my logic pro 9 is for 3 install's?

Logic Pro 9 (the DVD version) can be installed on a notebook and a desktop (2). The Mac App Store products can be installed on all Macs that you own. If you need a volume license (e.g. for a school) you should contact Apple.

How to change language in Logic Studio?

My MacBook is Mac OS X 10.5.6, the system language is Traditional Chinese,
I want to fill English in my Logic Studio, even though I choose the English when filling software,
Logic Studio still run Simplified Chinese,
How to change language for Logic Studio,
May I have any master help me, Please.
Thank you.

Try this.
Quit Logic
Open System Preferences
Click International
Click Language tab
Drag English to top of list
Quit Sys Pref
Open Logic
JG

How to send logic 0,logic 1 to labview wirelessly?

Similar Messages

Maybe you are looking for