How to Send message to MQ without using JMS Receiver Adapter

Hi Frnds,
Actually i am working one File to JMS scenario,I have to send message to MQ,What are the different ways we can send message to MQ without using JMS Adapter.
Regards,
Raj

Hi Ramesh,
Thanks for your replay,could you please eloborate how to integrate that one with XI,and how to use in XI?
regards,
raj

Similar Messages

How to send message to a queue using JMS adapter

Hi,
I need to send messages to the default queue(demoQueue) available in the server using a JMS adapter in a BPEL process.
I tried doing the same by using an invoke activity that invokes the JMS adapter service to send the message to the queue. I deployed this process in the server and gave an input to send it to the queue. The prcoess executed without any errors in the BPEL console.
I am also using Hermes v1.0 to monitor the queue but it says that it dint receive any messages in the queue to read.
I am sorry that i have restrictions from the client that i can't post the code here. Please let me know if anyone has got any solution or if you know any other way of doing the same.
Thank you
Message was edited by: prince
the_prince

You can use the following procedure :
DBMS_AQ.ENQUEUE (
queue_name IN VARCHAR2,
enqueue_options IN enqueue_options_t,
message_properties IN message_properties_t,
payload IN "<ADT_1>",
msgid OUT RAW);

How to replace/Change the JMS MSG ID in MQ using JMS Receiver Adapter

Hi Experts,
I am working on File to JMS Scenario,
My Requirement i need to chnage the JMS Message ID(not XI Msg ID) Value with My custoimer specific Value,
How can i achieve this??
any valuable inputs welcome,
Thanks advance,
Raj

Thanks for your reaply,we can change the value of XI MSG ID using Dynamic Configuration,
Then set the XI MSG ID and then make use of the correlation settings
From the help section:
Correlation Settings
Define the correlation settings.
·        Set JMSCorrelationID To:
¡        XI Message ID (MessageID) (default value)
¡        XI Reference ID (RefToMessageID)
¡        XI Conversation ID (ConversationID)
¡        No Value
But cant we directly make use of the ASMA to configure DCJMSCorrelationID?
Regards,
Abhishek.

How to place a binary zip files using sftp receiver adapter

Hi experts,
we got one scenario , where we need to pick the file (.zip) from local source path and place it in SFTP server path.
we have done all configuration setting and processed a zip to SFTP server.
but the client are saying the .zip file is not in a binary formate.
so could any please help me and provide solution on this issue.
regards
raju

hi Praveen,
i clicked binary mode option in sender channel, and at receiver side sftp adapter channel i not found any option.
could you please help me.
regards
raju

How many messsages can we insert using JDBC receiver adapter in to DB

Hi Friends,
We are having 30 JDBC receiver interfaces in my current implementation project; load of JDBC receiver interfaces was 50 k messages per day and Performing only INSERT operation on data base.
We have created individual communication channel for every JDBC receiver interface and max concurrency value set in CC was 5.
Now we are testing all interfaces in quality with all possible cases, but we found that JDBC receiver adapter unable to process 50 k messages per day, we are on PI 7.1 EHP1 SP7.
Please share your experiences with JDBC adapter receiver like per day how many messages we can transfer.
Thanks a Ton,
Raj

Raja Sekhar Reddy T wrote:
we are processing 50 k individual messages.
>
> I have increased max threads for JDBC receiver to 20 but no luck same rate only . My questions here is how many messages we can trasfer using JDBC receiver adapter?
>
> Regards,
> Raj
Hi raj,
I have seen some interfaces that deal with upload of 5000 rows at a rime.. I don't there will be a restriction in the no of messages that can be transferred using the JDBC adapter as such unless until the requirement is so para-normal and in your case it is not
Kind regards
XA

I have three iPads and one iPod and one iPhone. How can I message between them without sending the message to all of them. You send the message to your email address but all of them are set up und one account.

I have three iPads and one iPod and one iPhone. How can I message between them without sending the message to all of them. You send the message to your email address but all of them are set up under one account.

You can have a different receiving email in the Messages app on each device : Settings > Messages > Receive At . I'm not sure that there is a different way to have the message only go to one device.

How to send message to a multi-consumer queue using pl/sql

How to send message to a multi-consumer queue using pl/sql ? Thanks.
I tried following, but got an message: no receipient specified.
DBMS_AQ.ENQUEUE(
queue_name => 'aqadm.multi_queue',
enqueue_options => queue_options,
message_properties => message_properties,
payload => my_message,
msgid => message_id);
COMMIT;
END;
/

Here's two way to enqueue/publish new message into multi-consumer queue.
(1) Use explicitly declared recipient list
- Specify "Recipients" by setting recipient_list to messge_properties, before ENQUEUE().
DECLARE
recipients DBMS_AQ.aq$_recipient_list_t;
BEGIN
recipients(1) := sys.aq$_agent('RECIPIENTNAME',NULL,NULL);
message_properties.recipient_list := recipients ;
(2)Or, declare subscriber list permanently. Then you need not to specify recipient list each time you call ENQUEUE().
begin
dbms_aqadm.add_subscriber(
queue_name=>'YOURQUEUE',
subscriber=> sys.aq$_agent('RECIPIENTNAME', null, null)
end;
You can add 1024 local subscriber include maximum 32 remote-queue-consumer to one queue.

The Java plugin has created a time unfriendly issue with my e-mail account, I can not open or send any e-mail without using this plugin, how can I eliminate this problem without dropping m. firefox?

A few days ago I tried to e-mail a friend, when I started A box came up and it required me to add a plugin..Java. I contacted my e-mail courier and microsoft, they told me that is was a plugin from Mozilla Firefox. Since then I must go through Java to send or open an e-mail... this is NOT to my satisfaction, it takes too long for all of this to open and if it is not cleared , I am dropping Mozilla and going elsewhere. Why has this occurred? Is this a result of the last update? If so can I delete the last update and continue on the other version?
== This happened ==
Every time Firefox opened
== last week

Sorry, I have no idea what you mean by '''"The Java plugin has created a time unfriendly issue with my e-mail account, I can not open or send any e-mail without using this plugin,"'''.
If you think your problem is caused by the Java plugin, you should visit the Java support forum for assistance.
http://forum.java.sun.com/index.jspa
If you could explain what you mean by '''"time unfriendly''' issue with my e-mail account", maybe we'll be able to help you solve that issue.
It might be helpful for us if we knew exactly which web-mail provider you are using. It seems strange to me that viewing or sending web-mail would actually "need" Java for operation, its more likely that some other item on the web page needs Java to run some advertising or other garbage that isn't a necessary part of the web-mail functionality you want to use.

HT3529 How do I send a group text, I have set up groups in my gmail account but can't figure out how to send a group text without adding them all individually

How do I send a group text message, I have groups set up in my gmail account but can't figure out how to send a group text without adding them all individually ?

You can use iCloud:
Step 1. Log into www.icloud.com using your Apple ID.
Step 2. Click on Contacts and then click the groups ribbon (the red icon with two people) which is on the left-hand page when viewing All Contacts.
Step 3. The left page changes to a list of Groups (only those groups stored in iCloud are shown). Click the + button at the bottom to add a new group.
Step 4. Type a name for the new group and press Enter to save it. To change it after this, double-click its entry in the groups list.
Step 5. To add contacts to the new group, click on the All Contacts group and locate the first person to be added (you can use the search bar to find them quickly).
Step 6. Drag their name on top of the new group and drop it to add it to that group.
Step 7. To add more contacts, repeat steps 5 and 6, but you can add multiple contacts at once by pressing Ctrl (on a PC) or Command (on a Mac) and clicking on each contact in the list that you wish to select. Then, drag one of the highlighted names to the new group and they will all be added.
It's possible to add names to more than one group, and you can create as many groups as you like.
Step 8. Launch the Contacts app on your device (iPhone, iPod touch or iPad) and you should see the new group appear almost immediately - as long as you have an internet connection.
Until Apple builds in a function to create groups directly within the Contacts app, this is the best way to do it.

How to Send an Email to Outlook using process type in RSPC?

Hi,
How to Send an Email to Outlook using process type in RSPC?
We created lot of process variants, actually we want to send an mail to users if the DP Background job was succesfully finished.
Actually i tried with create message its not happening...
Plz let me know .. its urgent ...
Regards,
Satish

Hello Satish,
If you want to send a friendly message to your users, then you can do this by building an ABAP program that calls function module SO_NEW_DOCUMENT_SEND_API1 . You can then insert this ABAP program in your process chain (using the ABAP program process type) or as a second step in your background job. With this technique, you can send an email to SAP users, or to external users (e..g Outlook email addresses)
Here's a sample ABAP code:
data: ls_docdata type SODOCCHGI1,
        lt_objcont type table of solisti1,
        lt_receivers type table of somlreci1,
        ls_objcont type solisti1,
        ls_receivers type somlreci1,
        ls_user type syuname.
* Fill these variables with subject and msg lines that you need.
data: MAIL_SUBJECT     TYPE STRING,
MSG_LINE1     TYPE STRING,
MSG_LINE2     TYPE STRING,
MSG_LINE3     TYPE STRING,
MSG_LINE4     TYPE STRING,
MSG_LINE5     TYPE STRING.
ls_docdata-obj_descr = mail_subject.
ls_objcont-line = msg_line1.
append ls_objcont to lt_objcont.
ls_objcont-line = msg_line2.
append ls_objcont to lt_objcont.
ls_objcont-line = msg_line3.
append ls_objcont to lt_objcont.
ls_objcont-line = msg_line4.
append ls_objcont to lt_objcont.
ls_objcont-line = msg_line5.
append ls_objcont to lt_objcont.
* t_userlist contains the list of users to whom th email will be sent.
loop at t_userlist into ls_user.
    ls_receivers-receiver = ls_user.
"Change the type here if email is for outlook users, See documentation
" of function module in SE37
    ls_receivers-rec_type = 'B'.
    ls_receivers-express = 'X'.
    append ls_receivers to lt_receivers.
endloop.
CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
    EXPORTING
      document_data                   = ls_docdata
    tables
     OBJECT_CONTENT                   = lt_objcont
     receivers                        = lt_receivers
   EXCEPTIONS
     TOO_MANY_RECEIVERS               = 1
     DOCUMENT_NOT_SENT                = 2
     DOCUMENT_TYPE_NOT_EXIST          = 3
     OPERATION_NO_AUTHORIZATION       = 4
     PARAMETER_ERROR                  = 5
     X_ERROR                          = 6
     ENQUEUE_ERROR                    = 7
     OTHERS                           = 8
You can test out the function module first in SE37 (just put the name of the FM and click execute). Testing it in SE37 will help you get your parameters right.
Hope this helps.

How to send a Error mail without Orchestration

Hi,
I need to send an Error mail without using orchestration and without enabling Failed Message routing in the ports.
Please help me in accomplishing this.
Regards, Vignesh S

Hi Vignesh,
Have you considered using BAM and BAM alerts. For this create an activity, define view and Tracking profile to monitor the ports and then create an alert when a message fails on the port.
Have a look at Business
Activity Monitoring and BAM
Alerts
Also you can opt for monitoring tools like
BizTalk 360, AIMS
for BizTalk and Nevatech
Sentinet
Maheshkumar S Tiwari|User
Page | http://tech-findings.blogspot.com/

How to Start process in ProcessChain Without using Repeat option?

How to Start process in ProcessChain Without using Repeat option?

Se16 -- table:RSPCPROCESSLOG - click on display entries.
Entet the variant, instance start date (this info you can get from the "display message" of PC.
Now execute to display the table entries of RSPCPROCESSLOG.
Next goto SE37 transaction --enter RSPC_PROCESS_FINISH
Take the entries from the above table to set the input parameters of the FM.
I_logid = log_id(from above table)
I_type = type(from above table)
i_variant = varaint (from above table)
i_instance = (from above table)
Click on F8(EXECUTE)
now the actual process is set to gree and the process chain will be triggered (rest of the PC with out repeating the step from where is was red).

How to view messages from another iPhone using your apple Id

How to view messages from another iPhone using your apple Id

Sign into iMessage using the same ID (in Settings>Messages>Send & Receive). The other phone should then see your messages too.

I don't know how to send message to my friends via message

I downloaded mountain lion yesterday but I don't know how to send message to the imessage on ipad or iphone. The account of my friend's seems doesn't work and I have no access to sending message to that account.

Welcome to Apple Communities
Press the + button to select a contact. Then, write whatever you want in the white box and press Enter key. You can use it with contacts with iPhone, iPod touch, iPad or Mac with Mountain Lion

HT4623 I have tried resetting an iPhone 3 and I am unable to activate and sync it. How can I reset the device without using a computer?

I have tried resetting an iPhone 3 and I am unable to activate and sync it. How can I reset the device without using a computer?

Hello anacc,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Connect your USB cable to your computer but not to the iPhone, iPad, or iPod touch until step 3.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button down, connect the USB cable to the iPhone, iPad, or iPod touch. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen. When this screen appears, you can release the Home button:
Note: If the image of a battery appears, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again. If you don't see the Connect to iTunes screen, try these steps 1 through 4 again.
iTunes should automatically open and display the following message:
"iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes."Note: If iTunes not open after two minutes, please open iTunes yourself.
Use iTunes to restore the device.
Best of luck,
Mario

How to Send message to MQ without using JMS Receiver Adapter

Similar Messages

Maybe you are looking for