How to send the edited output fields of an ABAP report into internal table
Hi,
I had edited the output fields of an ALV GRID report now how can i again update the fields of the internal table with this edited new data .
Please suggest me if any method or FM exists for this.
Thanks in advance
With Regards
Ajay
hi,
you have to use the following code in the user command
*& Form command
* TO HANDLE USER ACTIONS AGAINST PF-STATUS
* -->UCOMM text
* -->SELFIELD text
FORM COMMAND USING UCOMM LIKE SY-UCOMM SELFIELD TYPE SLIS_SELFIELD.
DATA : LV_OKCODE TYPE SY-UCOMM.
LV_OKCODE = UCOMM.
CASE LV_OKCODE.
WHEN 'PROCESS'. "button
selfield-refresh = 'X'.
ENDCASE.
ENDFORM. "command
hope this helps
Regards
Ritesh
Similar Messages
-
How to send the spool output to the specific user during ALE distribution
Hi All
In ALE internal order Configuration done by BAPI Method SAVEREPLICA Business object BUS2075whenever user changed the internal order which is moved to the destination system because of change data setting in data element fields.
I want to know how to send the spool output of the changed internal order to the specific user during ALE distribution.
Please help me to reslove the above issue
Thanks & Regards
KRISHGUNASolved by myself
-
How to create the sub type field in hr abap infotype
hi ,
how to create the sub type field in hr abap infotype.
regards,
venkat.Try like this also
creating of infotype please follow these steps ...
Step 1: Create Infotypes
i. Goto Transaction PM01 To create Infotypes:
ii. Enter the Infotype Number and say create all.
iii. The following message would display:
i. PSnnnn Does not exist. How do you want to proceed?
iv. Click
v. A maintain Structure screen appears.
Fill in the short text description and the PS structure of the Infotype.
Since the fields Personnel No, Employee Begin Date, End Date, Sequential Number,Date of Last Change, Name of user who changed the object are available in the PAKEY and PSHD1 structure, define the PSnnnn structure with only the fields you required.
vi. Once the PS Structure is created, save and activate the structure.
vii. In the initial screen of PM01, now click on .
Create a new entry for the infotype.
Fill in the values as mentioned below and save.
Infotype Characteristics:
Infotype Name of the infotype_ Short Text: __Short Description________
*General Attributes :
Time constraint = 1
Check Subtype Obligatory
Display and Selection:
Select w/ start = 3 Valid record for entered data
Select w/ end = 5 Records with valid dates within the period entered
Select w/o date = 6 Read all records
Screen header = 02 Header ID
Create w/o end = 1 Default value is 31.12.9999
Technical Data:
Single screen = 2000
List screen = 3000; List Entry Checked.
viii. In the initial screen of PM01, now click on .
Choose the infotype entry in the list.
Fill in the values as mentioned below and save.
Technical Attributes:
In tab section,
The following attribute values are given:
Applicant DB Tab = PAnnnn Infotype Name
Subtype field = SUBTY
Subtype table = T591A
Subty.text tab. = T591S
Time cnstr.tab. = T591A
Prim. /Sec. = I Infotype
Period/key date = I Interval
and .
ix. Infotype Screen Modification:
Edit Screen 2000 from PM01 for the Infotype.
ABAP Editor for the Infotype Program MPnnnn00 will be displayed.
Click . Flow Logic will be displayed. There string coding of your own logic.
Regards
Pavan -
Hi All,
i have used CMS in SQL 2008 R2. i have added couple of servers in its group. i have executed a query & i need to send the query output in the form of email.
basically query is checking the rows count from couple of user tables in servers.
issue here is how to copy the data that is used by CMS? i need to work on automate the rows count in difft user table in db servers
could you please suggest how can i achieve this?Copy to what?
SELECT COUNT(*) FROM sys.objects
Running the above statement returns two columns (server name and count)
All the servers SS2005 and onwards , then use
EXEC msdb.dbo.sp_send_dbmail
@profile_name = 'name',
@recipients = '[email protected]',
@query = 'SELECT COUNT(*) FROM sys.objects',
@subject = 'Count rows'
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence -
Hi all experts,
I am in Oracle Enterprise Manager 11g 11.2.0.1.0.
SQL*Plus: Release 11.2.0.1.0 Production on Tue Feb 22 11:40:23 2011
is there anyone know why
SQL> create or replace directory XMLDIR as '/xdb/faq/testdata'
2 /
SQL> set long 10000 pages 200 lines 150
SQL> --
SQL> select xmltype(bfilename('XMLDIR','2003.xml'),nls_charset_id('AL32UTF8'))
2 from dual
worked. but
SQL> create or replace directory XMLDIR as 'C:\Drag_list\Modified';
SQL> select xmltype(bfilename('XMLDIR','2011.xml'),nls_charset_id('AL32UTF8'))
from dual
did not work?
IS there any way I can load the .xml file list from 'C:\Drag_list\Modified' into xmltype table?
Thanks.
Edited by: Cow on Apr 13, 2011 12:58 AMThis is a question better suited for the sql and pl/sql support forum, since it is NOT an APEX based question..: PL/SQL
Thank you,
Tony Miller
Webster, TX
On the road of life...There are 'windshields', and there are 'bugs'
(splat!)
"Squeegees Wanted"
If this question is answered, please mark the thread as closed and assign points where earned.. -
SUBMIT and return the value of that report into internal table
Dear all,
I have a requirement. I want to submit a report and return the value of that report into my internal table.
How to do this.
Pl. guide.Hi Vidhya,
Below links from SAP help will resolve your issue.
http://help.sap.com/saphelp_nw04/Helpdata/EN/fc/eb3bde358411d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3bd1358411d1829f0000e829fbfe/content.htm
Edited by: Harsh Bhalla on Jan 2, 2010 11:54 AM -
How to find the t-code of a given ABAP report, if any?
How to find tcode if any assigned to a report program (ABAP) ?
Instead of going to SE38, then test - run direct thru F8. An alternate fast way?
Thanks,Hi,
In order to check T.code assigned to an ABAP program, go to se38 and click on display which will open the ABAP code of the program. Now on this screen press CtrlShiftF5. On the left side of the screen you will find the object associated with the ABAP program. Expand on the object Transactions, which will show you the T.Code associated with the program.
Hope this helps.
VK -
How to fetch the Business area field value from MIRo into report
Hi,
I want to create a report for MIRO with payment details.
How to fetch the business area field value in to report.
What is the table name. I verified it is storing in structure. Which is the right table for fetching that value with reference to MIRO.
After that, how to find the accounting document for payment and check details.
What are the table names and field names. What we can get from PAYR table.
With regards
LakkiDear,
For Bussiness area
RKPF-GSBER -
Send the list ouput of ALV or normal report to e-mail
how to send the list ouput of ALV or normal report to e-mail?
Already SAP is providing the option to send output to email
For ALV
Go to Print Preview> list> send to --> mail receipient
if it is normal list
list> Save/Send> office
a® -
Extract the classification data into internal table
Hi all,
I having requirement to extract classification data for material number.
1) Provide the selection option for material number (MATNR).
2) Based on the material number, then extract all that data into internal table as below layout. My problem is how to retrieve the following data from different table based on the MATNR (material number).
Please provide the sample code for select the following data. Thanks.
Classification table
OBJEK (from AUSP table)
MAFID (from AUSP table)
KLART (from AUSP table)
CLASS (from KLAH table)
ATWRT (from AUSP table)
MSEHI (from CABN table)
OBTAB (check if class type=002, set it as MARA)
STDCL (from KSSK table)Hi,
if I understand, you´re trying to get information from the classification system for the material. You can use the following code:
DATA: clases LIKE TABLE OF sclass WITH HEADER LINE,
datos LIKE TABLE OF clobjdat WITH HEADER LINE.
CALL FUNCTION 'CLAF_CLASSIFICATION_OF_OBJECTS'
EXPORTING
class = 'DESK' "clase a buscar
classtype = '001' "tipo de la clase
features = 'X'
language = sy-langu
object = 'PM00A000C055' "Material
objecttable = 'MARA'
key_date = sy-datum
initial_charact = 'X'
change_service_clf = 'X'
TABLES
t_class = clases
t_objectdata = datos
EXCEPTIONS
no_classification = 1
no_classtypes = 2
invalid_class_type = 3
OTHERS = 4.
loop at datos.
endloop. -
How can i make the input/output field to a multiple lines in ModulePool...
hi all...
can any one please let me know, is there any possibility thru Module Pool program where i can make the input/output field to a multiple lines...
say, when we drag & drop the input/output field on the screen - it'll come with single line display. so, how to make the same field to multiple lines field.
rather i can say my question like, how to increase the height of the input/output field.
Desired Functionality:
The user wants to display a long text.
now the input/output field should not display the record as a single line, now the field has to display the text in multiple lines (something like wrap option in ms excel).
hope u got my question...
please help me in this regards...hi Rengith, i'm not using Text Field, i'm using Inpu/Output Field to display the long text.
If u mean text field as input/output field then can u let me know the process for this, how to do the same thru module pool program...
Edited by: murashali on Mar 18, 2008 1:36 PM -
How to send the ALV GRID output to spool by using the print button in std t
How to send the ALV GRID output to spool by using the print button in standard tool bar.
We have created a button in the va02 transaction. If user click on the button the new screen will be display on that screen we are populating the alv grid output using the oops concept. But i am unable to send the output to spool using the print button in the standard tool bar.
I am able to display the Print parameter dialog box but i am not able to send it to spool.
Kindly help.
Thanks In Advance.
G.V.RamanaHi Shaik,
There is not properties button in my print screen.
MODULE user_command_0900 INPUT.
WHEN 'EXCEL'.
PERFORM excel_download.
WHEN 'PRI'.
PERFORM print_output.
form Print_output.
CALL FUNCTION 'RSPO_LIST_LAYOUT_FITS'
EXPORTING
columns = 80
device = 'ANY '
lines = 65
maxpenality = 1999
TABLES
layouts = lt_layouts1
EXCEPTIONS
unknown_device = 1
OTHERS = 2.
IF sy-subrc = 0.
LOOP AT lt_layouts1.
IF lt_layouts1-penality < 1000 AND
lt_layouts1-penality < l_min_penality.
l_layout = lt_layouts1-layout.
l_min_penality = lt_layouts1-penality.
ENDIF.
ENDLOOP.
IF NOT l_layout IS INITIAL.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
mode = 'CURRENT'
line_size = 80 "#EC *
new_list_id = l_new_list_id
no_dialog = l_no_dialog
layout = l_layout
IMPORTING
out_archive_parameters = rs_arc_params
out_parameters = rs_pri_params
valid = l_valid
EXCEPTIONS
archive_info_not_found = 1
invalid_print_params = 2
invalid_archive_params = 3
OTHERS = 4.
IF sy-subrc NE 0. " INS SLIN
ENDIF. " INS SLIN
IF rs_pri_params-linsz LT 80 OR
rs_pri_params-linsz LT gt_stack-s_lprint-width.
gt_stack-print_line_break = 'X'.
ELSE.
CLEAR gt_stack-print_line_break.
ENDIF.
IF l_valid NE 'X'.
rs_pri_params = ls_pri_params_sav.
rs_arc_params = ls_arc_params_sav.
ENDIF.
ENDIF.
ENDIF.
endform. " Print_output
CALL METHOD gv_cost_tot_alv_grand->set_table_for_first_display
EXPORTING
is_layout = gs_layout_cost_tot_grand
CHANGING
it_fieldcatalog = gt_fcat_cost_tot_grand[]
it_outtab = gt_cost_tot_grand[].
Please check my code -
How to send the output to PDF format in reports 6i?
Hi,
How to send the output to PDF format in reports 6i? I given Mode = BITMAP.
DESTYPE = File, DESFORMAT = PDF, DESNAME = C:\x.pdf.
Report is running fine. But PDF file not generated. I don't know what i missed. Any one can help this?
Thanks
KavithaHello,
Do you get this problem only for DESFORMAT=PDF ?
Test with :
DESFORMAT = RTF, DESNAME = C:\x.rtf
or
DESFORMAT = HTMLCSS, DESNAME = C:\x.html
does it work ?
Check if DESNAME is modified in the reports itself.
Regards -
How to send the output of one step as input to next step
Hello All,
I have a question that how to send the output of the first step as the input to the next step.
for e.g
consider a test sequence as below,
1.battery ON.
2. read Voltage
3. Check battery voltage.
as initially the battery gets ON when ever the test starts. in the second step it reads the voltage. let us assume that the voltage is 11.5V,
in the third step we r checking/validating that battery voltage in the range 11V to 12 V. . I mean if the vloltage value is less than 11V or greater than 12V te test has to FAIL.
so in order to check that voltage we need to send the voltage read from the second step.
so how can I send the voltage read from the second step to the third step so that I can check the battery voltage test.
kindly suggest me this using LabVIEW/Test stand.Hi,
Why do you need the third step, if the second step is a Numeric Limit Test step type, you can setup the limits of this step for your required limits of 11V and 12V. Your result is returned from your VI to Step.Results.Numeric which will be evaluated in the Status Expression giving you a Pass / Fail status.
Look at the example TestStand\examples\demo\..\Computer Motherboard Test\computer.seq
But to answer your reoriginal question, some additional information is required.
What are your inputs and outputs assigned to in TestStand, do you use the Step properties, Locals, FileGlobals?
Regards
Ray Farmer
Regards
Ray Farmer -
How to send the report output to the application server in a excel file
Hello,
how to send the report output to the application server in a excel file.
and the report runs in background.
Thanks in advance.
SundeepDear Sundeep.
I'm providing you with the following piece of code ... Its working fine for me ... hopefully it suits your requirement ...
D A T A D E C L A R A T I O N *
TYPES: BEGIN OF TY_EXCEL,
CELL_01(80) TYPE C,
CELL_02(80) TYPE C,
CELL_03(80) TYPE C,
CELL_04(80) TYPE C,
CELL_05(80) TYPE C,
CELL_06(80) TYPE C,
CELL_07(80) TYPE C,
CELL_08(80) TYPE C,
CELL_09(80) TYPE C,
CELL_10(80) TYPE C,
END OF TY_EXCEL.
DATA: IT_EXCEL TYPE STANDARD TABLE OF TY_EXCEL,
WA_EXCEL TYPE TY_EXCEL..
E V E N T : S T A R T - O F - S E L E C T I O N *
START-OF-SELECTION.
Here you populate the Internal Table.
Display - Top of the Page.
PERFORM DISPLAY_TOP_OF_PAGE.
E V E N T : E N D - O F - S E L E C T I O N *
END-OF-SELECTION.
SET PF-STATUS 'GUI_STATUS'.
E V E N T : A T U S E R - C O M M AN D *
AT USER-COMMAND.
CASE SY-UCOMM.
WHEN 'EXPORT'.
Exporting the report data to Excel.
PERFORM EXPORT_TO_EXCEL.
ENDCASE.
*& Form DISPLAY_TOP_OF_PAGE
text
--> p1 text
<-- p2 text
FORM DISPLAY_TOP_OF_PAGE .
SKIP.
WRITE: /05(128) SY-ULINE,
/05 SY-VLINE,
06(127) 'O R I C A'
CENTERED COLOR 1,
132 SY-VLINE.
WRITE: /05(128) SY-ULINE,
/05 SY-VLINE,
06(127) 'Shift Asset Depreciation - Period/Year-wise Report.'
CENTERED COLOR 4 INTENSIFIED OFF,
132 SY-VLINE.
WRITE: /05(128) SY-ULINE.
E X C E L O P E R A T I O N
CLEAR: IT_EXCEL[],
WA_EXCEL.
PERFORM APPEND_BLANK_LINE USING 1.
WA_EXCEL-cell_02 = ' XYZ Ltd. '.
APPEND WA_EXCEL TO IT_EXCEL.
CLEAR: WA_EXCEL.
WA_EXCEL-cell_02 = 'Shift Asset Depreciation - Period/Year-wise Report.'.
APPEND WA_EXCEL TO IT_EXCEL.
PERFORM APPEND_BLANK_LINE USING 1.
ENDFORM. " DISPLAY_TOP_OF_PAGE
*& Form APPEND_BLANK_LINE
text
-->P_1 text
FORM APPEND_BLANK_LINE USING P_LINE TYPE I.
DO P_LINE TIMES.
CLEAR: WA_EXCEL.
APPEND WA_EXCEL TO IT_EXCEL.
enddo.
ENDFORM.
*& Form EXPORT_TO_EXCEL
text
--> p1 text
<-- p2 text
FORM EXPORT_TO_EXCEL .
DATA: L_FILE_NAME(60) TYPE C.
Create a file name
CONCATENATE 'C:\' 'Shift_Depn_' SY-DATUM6(2) '.' SY-DATUM4(2)
'.' SY-DATUM+0(4) INTO L_FILE_NAME.
Pass the internal table (it_excel which is already populated )
to the function module for excel download.
CALL FUNCTION 'WS_EXCEL'
exporting
filename = L_FILE_NAME
tables
data = IT_EXCEL
exceptions
unknown_error = 1
others = 2.
if sy-subrc <> 0.
message e001(ymm) with 'Error in exporting to Excel.'.
endif.
ENDFORM. " EXPORT_TO_EXCEL
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
When you click the button - Export to Excel ( GUI-Status) you'll be able to export the content of the Internal Table to an Excel file .......
Regards,
Abir
Don't forget to award Points *
Maybe you are looking for
-
Cannot open any library documents with MS Office
I recently starting using Beehive. I am a user, not an administrator. I uploaded a bunch of documents to a new workspace I just created. Now I want to open them for viewing and editing. When I try to open any MS Office document (Word, Powerpoint, Exc
-
Hello all, As you can see from the attached pic, the full screen on safari is not convering completely my 13MBP screen on the lower side. The only way to fix it, is to switch off the full screen and then re-enable it. But it last just a couple of min
-
Transfering itunes to new computer???
I am getting a new computer. How can I get my music from my old computer itunes onto my new one?
-
Afternoon all XP SP3 I downloaded some microsoft updates this morning, including IE8. After updating I ran ccleaner to tidy up the registry. My sign in seal on BTY has disappeared and I don't seem to be able to create a new one. Any suggestions? TIA
-
Trouble with printing wireless
Can anyone help. Up until recently I have had no trouble printing wirelessly with iPad and HP photos mart B210 series. Recently it has become a nightmare. Printing jobs are left in a que. it connects to the printer, but will not complete print task.