How to send values from a "Report Column" instead of a "Page Item" ?

Hi there,
Here's my case: Two pages A and B.
Page A is used to view each employee from a selected department.
Page B is used to created/modify employees.
I have a create button on page A which redirect to page B.
By default, page B is blank (as of course we have to fill the blanks to create a new employee).
However, there is 2 values I want to send to page B (as I'd like to pre-fill some blanks) : The department ID and the Manager ID (there is one manager per department).
---- I succeed with the department ID because it's a page item and in the "Action When Button Clicked" of the button I filled "Set These Items" -> Item From Page B "With These Values" -> Item from Page A.
---- I'm confused with the Manger ID because it is not a page item but a report column and there is nothing to do like I did for the Department ID in the create button.
I'm a bit lost cause I don't know how to transfer/send this value to the second page.
Do you have any clue ?
Thanks again for your time !
BR
Ulrich

Ulrich,
Maybe I have misunderstood your requirements, from those I assumed that Page 4 was already being populated with a Department ID. So my plan was to look-up the Manager ID via the known Department ID
Here's my case: Two pages A and B.Page A is used to view each employee from a selected department.
Page B is used to created/modify employees.
I have a create button on page A which redirect to page B.
By default, page B is blank (as of course we have to fill the blanks to create a new employee).
However, there is 2 values I want to send to page B (as I'd like to pre-fill some blanks) : The department ID and the Manager ID (there is one manager per department).
---- I succeed with the department ID because it's a page item and in the "Action When Button Clicked" of the button I filled "Set These Items" -> Item From Page B "With These Values" -> Item from Page A.
---- I'm confused with the Manger ID because it is not a page item but a report column and there is nothing to do like I did for the Department ID in the create button.>
Have you verified that you have the :P4_DEPARTMENT_ID in session?
Does your SQL run in SQL Commands when provided a Department ID?
Have you tried altering when the Computation fires? I recommended to start with After Regions, try some other firing points.
Jeff

Similar Messages

  • How to send values from Acquire Input data through Xbee

    Hi,
    I've initialzed my joypad- Zebronics ZEBST50JP and can read data from Acquire Input Data. I've seen that button work with Boolean Logic(True or False) and Arrow keys work with axis logic(32767 to -32768).
    Now all i need to know is, How to send these values through Xbee(Connected to PC using USB Adapter) to another Xbee connected to an Arduino (with Servo motors)
    Thanks in Advance

    Now i have Intialized my joystick.. But still have confusion with sending to XBee Pro...
    Here is my Post, which has the file
    http://forums.ni.com/t5/LabVIEW/How-to-send-signals-through-XBee-connected-in-USB-port/m-p/2135382 

  • How to Send  Values from  READ_TEXT   to   User exit

    Hi Friends.,
                       I need to Read Values from  READ_TEXT  FM  and send those values  to  User exit  ( Exit_SAPLRSAP_001  for   ZSALES_2LIS_11_VAITM )  Datasource,
    I'm Getting one Indicator value ( values are like   Y N  0 )  from  READ_TEXT  FM
    and i have to make use of this in Extraction Part
    can anyone help me out in ABAP coding to get these values from  READ_TEXT  FM  to  User exit
    Regards
    Sridhar.

    Hi,
    if you open the FM in se37,you will find the 'Function module documentation' button. click on it and try to see what this function module is about.
    i am attaching a sample code to read the text of a penalty inforamion field.
      DATA: T_LINE_T LIKE TLINE OCCURS 0 WITH HEADER LINE.
      DATA: S_THEAD LIKE THEAD.
      DATA: T_LINE_H LIKE T_LINE_T OCCURS 0 WITH HEADER LINE.
    CALL FUNCTION 'READ_TEXT'
              EXPORTING
                CLIENT                        = SY-MANDT
                ID                            = 'K01'     "Valid values for the text ID are defined in table TTXID.
                LANGUAGE                      = SY-LANGU
                NAME                          = LV_SO     "here i am passing Sales order no
                OBJECT                        = 'EKPO'    "The text object is part of the text key and assigns the text module to a specific application object. Valid text objects are defined in table TTXOB.
      ARCHIVE_HANDLE                = 0
      LOCAL_CAT                     = ' '
             IMPORTING
               HEADER                         = S_THEAD
              TABLES
                LINES                         = T_LINE_T
             EXCEPTIONS
               ID                            = 1
               LANGUAGE                      = 2
               NAME                          = 3
               NOT_FOUND                     = 4
               OBJECT                        = 5
               REFERENCE_CHECK               = 6
               WRONG_ACCESS_TO_ARCHIVE       = 7
               OTHERS                        = 8
            IF SY-SUBRC = 0.
              READ TABLE T_LINE_T INTO T_LINE_H INDEX 1.
    Storing the value in the structure.
              E_T_DATA-PENALTY = T_Line_H-TDLINE.
            ENDIF.
    Thanks.

  • Passing parameter from interactive report column link to new page

    I'm very simply trying to pass the value of the column link to the where clause on the next page.
    Interactive Report on P2 has column link fid alias in sql query.
    I read somewhere to refer prefix the interactive report column with IR ??
    So I have item name P2_FID, value #FID#. Anyway, I've tried a kazillion things.
    Created a hidden item with same source value... sigh.
    Is there a syntax to refer to a report column link, rather than an item_id in a region where clause?
    Is there a simple direct way to do this?
    Thanks,
    Pamela
    -----pls/apex/f?p=163:1:2746459963336955::NO::P2_FID:119

    Thank you Varad...
    Unfortunately, I am still getting no data found. (and there IS data).
    a) Do you mean in the link column section of the report attributes? that is done: item 1 name= IR_P2_FID, value = #FID#
    b) Do you mean my changing my hidden page item to ir_p2_fid with its source value as #FID# ? also done.
    Do I need this hidden item?, and if not how do I refer to link in the where clause of the called page's sql region?
    3) Where Fishery_id = :IR_P2_FID
    Where Fishery_id = &IR_P2_FID
    Thanks again!
    Pamela

  • How to send value from servlet to midlet?

    I need to display value in textbox in emulator.
    If i am creating textbox in servlet it wont display textbox
    but it displays content available in out.println (html tags).
    Thanks

    I�m king of Java, i have fixed it.
    //Nisse

  • How to send emails from of pdf's generated by oracle reports

    I have several pdf documents , I want to email those pdf's . Please let me know how to send emails from oracle reports .
    Thanks,
    Previn

    I have integrated Oracle Reports with Oracle Portal and used the scheduling feature via portlets. We have reports that run every monday morning for management. For more info go to:
    http://otn.oracle.com/products/reports/htdocs/getstart/demonstrations/index.html
    OR
    I think if you set destype=mail, desformat=PDF, and desname=[email protected] that should also do the trick.
    Just be sure that you have put your mail server's IP address in the rep_<machine_name>.conf file located in your <oracle_home>/reports/conf directory. If this is not set up, the mail feature won't work.
    Martin

  • How to pass the value from Sub report to main report

    I have un report(mainreport) within a subreport(subreport).
    With reporting services, how to pass the value from Sub report to main report?
    thanks

    Hi Alebet,
    With reporting services to pass values from sub report in to main report is not supported directly.
    But there are some workarounds through which you can get this .
    There are two ways to get this.
    1- Put your sub report query into some table. i mean to say through the subreport query get some temporary table.
    2- Using this temporary tables data write some Scala function in the data base.
    3- Now in your main report query return this scala function as a column.
    4- Extract the column value where ever you want in your main report which is getting calculated from the subreport query. so you will be getting the values returned from the subreport in the main report.
    This will definitely work fine as i have done some report in this way.
    Another way of doing is that
    1- prepare another data set with the same query as in sub report in the data tab.
    2- then refer this 2nd dataset in your main report .
    But better way will be the top one.
    Anyway please let me know if you get the solution.
    Thanks
    Mahasweta

  • How to call a PL/SQL Procedure from a Report Column Hyperlink

    Hallo!
    Normally a link on a column value in a report leads you to a page in your application or to another URL.
    And you can send the value of this cell to the calling page.
    I want, that oracle executes a procedure with the values as in-Parameters if I click on this hyperlink.
    Must I call a dummy page and define this procedure in the header of this page or exit there other ways?
    Can you give ma an example?
    Thanks a lot!
    Gerhard

    Paul - When a column link is used to invoke a On Demand Process in that way, wouldn't that result in a blank page (unless of course the ODP emits a well-formed HTML document)? You could set the link target to a no-op like *#* and use a onclick handler in the Link Attributes to call a Javascript that uses the htmldb_get object to call the ODP. In fact, I don't think I have ever seen a ODP used in any other context.

  • Get value from  APEX_ITEM.SELECT_LIST_FROM_QUERY - column on a report.

    Hello.
    Help. Help. Help.
    I have to get value from APEX_ITEM.SELECT_LIST_FROM_QUERY - column on a report.
    SELECT DISTINCT ROLE AS GET_ROLE,
    JOB AS GET_JOB,
    APEX_ITEM.SELECT_LIST_FROM_QUERY
    ( 1, '%', 'SELECT DISTINCT CODE c,
    MODE m
    FROM T2
    WHERE ROLE = ' || ROLE ) AS GET_CODE
    FROM T1
    WHERE AGE >30 AND
    SEX = 'M' ;
    I was trying to use javascript :
    for (var i = 0; i < selectlist_name.options.length; i++)
    if (selectlist_name.options[ i ].selected)
    result=selectlist_name.options;
    But I don't know is that correct:
    "selectlist_name" - APEX_ITEM.F01
    (of my APEX_ITEM.SELECT_LIST_FROM_QUERY)?

    Just as a note, but you want to make sure your APEX_ITEM call is closed. The code snippet you posted isn't complete.
    APEX_ITEM.SELECT_LIST_FROM_QUERY(6,c020, 'select DISTRIBUTION_NAME, DISTRIBUTION_NAME from DISTRIBUTIONS','style="", SEQ_ID   <-- No closing )In the documentation - http://www.utoug.org/i/doc/api099.htm - (though it isn't necessarily the easiest to read) it gives this explanation of the syntax:
    APEX_ITEM.SELECT_LIST_FROM_QUERY(
    p_idx IN NUMBER,
    p_value IN VARCHAR2 DEFAULT,
    p_query IN VARCHAR2,
    p_attributes IN VARCHAR2 DEFAULT,
    p_show_null IN VARCHAR2 DEFAULT,
    p_null_value IN VARCHAR2 DEFAULT,
    p_null_text IN VARCHAR2 DEFAULT,
    p_item_id IN VARCHAR2 DEFAULT,
    p_item_label IN VARCHAR2 DEFAULT,
    p_show_extra IN VARCHAR2 DEFAULT)
    RETURN VARCHAR2;
    What you want to look at is p_value to set an initial value. It should come from your data, but you could consider doing an NVL or DECODE to substitute your default.
    In this case it would modify your query to be:
    SELECT distinct apex_item.hidden(1, seq_id), c003,c004,c005, c006,
          APEX_ITEM.SELECT_LIST_FROM_QUERY(6,c020, 'select DISTRIBUTION_NAME, DISTRIBUTION_NAME from DISTRIBUTIONS','style=""),
          SEQ_ID
      FROM APEX_collections
    WHERE collection_name = 'ARGYLL_INVOICES'
    order by seq_id If the value is always NULL, you can use the p_show_null, p_null_value, and p_null_text to put in a "default"
    SELECT distinct apex_item.hidden(1, seq_id), c003,c004,c005, c006,
          APEX_ITEM.SELECT_LIST_FROM_QUERY(6,NVL(c020,0), 'select DISTRIBUTION_NAME, DISTRIBUTION_NAME from DISTRIBUTIONS','style="",YES, 100, 'Default'),
          SEQ_ID
      FROM APEX_collections
    WHERE collection_name = 'ARGYLL_INVOICES'
    order by seq_id

  • How can we read the screen field values from the report selection screen wi

    Hi expart,
    How can we read the screen field values from the report selection screen with out having an ENTER button pressed  .
    Regards
    Razz

    use this code...
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_posnr.
    **Read the Values of the SCREEN FIELDs
    CALL FUNCTION 'DYNP_VALUES_READ'

  • How to pass the value from sub report to sub report

    how i want get one value from sub report to sub report..
    can i do this one...
    how can get the value.
    i know main report to sub report
    i tried that way but
    value is  0.00 is comming
    Any reasons.

    Hi Try this.
    Create a formula like this in subreport1 (from the report where you want to pass your value)
    Whileprintingrecrods;
    Shared Numbervar x :={subreport1Value};
    Then go to 2nd sub report and Create a formula like this
    Whileprintingrecrods;
    Shared Numbervar x ;
    Note :Your sub report1 should execute before sub report2 .That means sub report1 should be in the above section of sub report2

  • Need help with Javascript to get value of standard report column

    Hello All,
    Apex version 3.1
    I have a SQL Query (Updateable report) region where I need to do some validations using an OnDemand Applicaiton Process and javascript. For this validation I need to use the serial number and the item id from the same report row. The function is called when the serial number is changed. I can get the serial number easily because it is a Text field, however the item id is a standard report column (making it a text field or hidden gives me a checksum error, long story). How do I get the value for the standard report column in order to set the value for an Application item to be used in my Application Process along with the serial number? Here is my code below.
    <script>
    function f_ValidateSerial(pThis)
      // The row in the table
      var vRow = pThis.id.substr(pThis.id.indexOf('_')+1);
        //alert('Row is '+vRow);
      // Display the serial number
        //alert('The Serial Number is '+html_GetElement('f21_'+vRow).value);
    var get = new htmldb_Get(null,&APP_ID.,'APPLICATION_PROCESS=ValidateSerial',0);
    get.add('F101_SERIAL_NUMBER',html_GetElement('f21_'+vRow).value);
    get.add('F101_INVENTORY_ITEM_ID',+html_GetElement(?????+vRow).value);   // Here's where I need to get the item id to set application item!!
    gReturn = get.get();
    if (gReturn)
          alert(gReturn);
      if(gReturn)
          html_GetElement('f21_'+vRow).value = '';
    </script>

    jarola wrote:
    Hi,
    Ok, No standard report column do not have name attribute-
    You can add one extra column to report that is your Item Id with different alias.
    Then change that column Display as to "Hidden".
    Now you have hidden input where is your Item Id. Than input have name and id.
    Regards,
    JariBut this puts me back to my initial problem. When making the column hidden I get the checksum error...
    Error in mru internal routine: ORA-20001: Error in MRU: row= 0, ORA-20001: ORA-20001: Current version of data in database has changed since user initiated update process...
    The item id is NOT in the table which I am updating (I use a subquery to get the data) so I think it has to be a standard report column. Hidden and Text Item (which have an item id) all generate the checksum error.
    So I think I'm back to my original question. Given a standard report column on a row in a sql query (updateable report) region how do I get the value using Javascript?
    Edited by: blue72TA on Aug 2, 2011 12:07 PM

  • Passing values from main report to sub-reports

    - How do we pass values from main report to sub-report?

    Look at this link which shows how to pass values from a subreport to a main report.
    http://www.datamanagementgroup.com/resources/trainerstalk/trainerstalk_howto_share_subreport_data_with_main_report.asp
    You can use the same method to pass values from main report to a subreport.
    1) Create a formula @mainFormula in the main report, as given in item 1 of link.
    2) Place this formulla in a suppressed report footer section above the target subreport.
    3) In the subreport, create a formula @subFormula that declares the same variable name, as given in item 3 of link.
    4) Place @subFormula column in the subreport where you want to display it.

  • Facing Problem with passing Values from One report to another

    Hi,
    I am Hemanth, I have developed 2 reports. Firast Report High Level Summary, Secong is detailed. First report is developed using Union(4 union) , I am having 4 columns. The report is generating the data. I have used Navigation option on Client Column to move on to Second report. In Second report with in Filter i am using Prompted option. Due to some problem, the client value from first report is not passing to the second one. The second report is getting generated for all the clients.
    Normally i have used this Navigate option in other reports and that works fine. I have even tested with Union, it works. This time it is giving some trouble.
    Please, let me know whats going wrong.
    Thanks for the help.

    sorry for the late updation.
    My First Report, Summary level is a Pivot Table.
    I tried the same report with Table option, the value is passing correctly.
    Is there a way to get rid of this situation using Pivot table.
    Thanks for your help.
    below is the original request.
    Hi,
    I am Hemanth, I have developed 2 reports. Firast Report High Level Summary, Secong is detailed. First report is developed using Union(4 union) , I am having 4 columns. The report is generating the data. I have used Navigation option on Client Column to move on to Second report. In Second report with in Filter i am using Prompted option. Due to some problem, the client value from first report is not passing to the second one. The second report is getting generated for all the clients.
    Normally i have used this Navigate option in other reports and that works fine. I have even tested with Union, it works. This time it is giving some trouble.
    Please, let me know whats going wrong.
    Thanks for the help.

  • Unable to pass the values from one report to another using navigation links

    Hi All,
    I am facing a strange issue where I have to pass a column value from one report to other.
    I have kept navigation link in the 1st report and 'is prompted' option in the 2nd report
    Issue was , I'm not getting the filtered result in the 2nd report (all the records are being displayed)
    Can anyone advice where I was going wrong
    Thank you,
    AO

    Hi,
    The column which you have given navigation link and 'is prompted' column should same and exist in both the reports.You have to give the guided navigation in the value interaction of the column in the report1.
    mark if helpful/correct.........
    thanks,
    prasanna

Maybe you are looking for