How to separate the source and the measured current

Hi Everybody,
I'd like to know if there is some way to separate the source and the measured current and just writte an mathematical expression to make a dependence between the source and the said parameter. Thanks in advance.

Sure,
Here is the deal:
I'd like to build a circuit with dependent sources, but instead of connecting the sense of current/voltage, I'd like to know if there is a way to writte a sentence for the source which is dependent of a parameter.
For example:
In this circuit I just wrote an expression for the source and its respective parameter. (8*Io).
Attachments:
images.jpg ‏7 KB

Similar Messages

SAP System copy without shutting down the source and the target system

Hi,
We need to need to System refresh without shutting down both the source and the target system, i read the docs from SAP looks like we need to shutdown the source system during export and import phase, is there any way to do the system refresh without shutting down the system.
Sathish

Hi,
Think a little bit about what is a database and you'll get the answer that what you "need to need" is impossible.
Of course it is possible to keep the source running (hopefully, because ususally it is the production system !) by using an online backup, but you need to stop the target system because you will restore a backup on it.
If you use the export/import way, you have to stop both source and target system.
Regards,
Olivier

I need to back up and sync multiple iPhones to a single iMac. Each iPhone has a separate Apple ID and the data from each iPhone needs to be backed up separately from the others. How can I do this without getting all of the contacts, etc. mixed? Tnx

I need to back up and sync multiple iPhones to a single iMac. Each iPhone has a separate Apple ID and the data from each iPhone needs to be backed up separately from the others. How can I do this without getting all of the contacts, etc. mixed? Tnx

This might help: http://support.apple.com/kb/HT1495.

How can I get a file to copy all of the files in a directory except itself and the source of the copy function will be the directory the final program is in?

How can I get a file to copy all of the files in a directory except itself and the source of the copy function will be the directory the final program is in? This application must be in Lab View 8.

you mean something like this (see below)?
Now you may have to implement code to check if the destination folder exists and to create it, etc. But if you use the Front Panel Control to select the destination folder, it should be okay.
Not the best implementation, mind you but you'll get the idea..
Message Edited by JoeLabView on 04-18-2007 03:43 PM
Attachments:
copy folder contents.PNG ‏10 KB

A friend gave me an older Nano 3rd generation. Can anyone tell me how to delete what is on there and how to get rid of his name. It does not connect to my itunes. I cannot even find the source or the place to restore it as suggested in the owners manual.

I have a 3rd generation ipod that a friend gave me. I cannot find anything on how to get rid of his name and music on it. This is what the owners manual says:
"Select ipod nano in the soiurce list and click the summary tab" I cannot find the source or the summary tab on itunes. Can any one help me? I would like to delete everything on it and start over but I am afraid I cannot add anything back on it. I know this is detailed and a lot, but I really need help.

Restore
Note: Because Restore erases all of the songs and files on iPod, make sure toback up any files you've saved on the iPod disk. All of your songs, videos, podcasts, audiobooks, and games can be loaded back to your iPod provided that you have them stored in your iTunes Library.
How to restore your iPod:For Windows:
1. Make sure you've reinstalled the latest version of iTunes.
2. Open iTunes, and then connect your iPod to your computer.
3. After a few moments, it will appear in the source list in iTunes. If the iPod's display doesn't show "Connected" or "Do not disconnect" you may need to put the iPod into disk mode to proceed.
4. Select your iPod in the source list and you will see information about it appear in the Summary tab of the main iTunes windows.
5. Click the Restore button. You will be prompted with one or more restore options that may prompt iTunes to automatically download of the latest iPod Software. The 4 possible restore options are:
Restore Option 1: Restore - Restores with same iPod Software version already on iPod.
Restore Option 2: Use Same Version - Restores with same iPod Software version already on iPod even though a newer version is available.
Restore Option 3: Use Newest Version - Restores with the latest iPod Software on your computer.
Restore Option 4: Restore and Update - Restores with the latest iPod Software on your computer.
6. A progress bar will appear on the computer screen indicating that the first stage of the restore process has started. When this stage is completed, iTunes will instruct you to leave iPod connected to your computer to complete restore.
7. During the stage 2 of the restore process, the iPod will show an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remains connected to the computer or iPod Power adapter during this stage. Note: The progress bar may be difficult to see since the backlight on the iPod display may be off.
8. After stage 2 of the restore process is complete and the iPod is connected to the computer, the iTunes Setup Assistant window will appear asking you to name your iPod and choose your syncing preferences similar to when you connected your iPod for the first time.
For Mac:
1. Make sure you've reinstalled the latest version of iTunes.
2. Open iTunes, and then connect your iPod to your computer.
3. After a few moments, it will appear in the source list in iTunes. If the iPod's display doesn't show "Connected" or "Do not disconnect" you may need to put the iPod into disk mode to proceed.
4. Select your iPod in the source list and you will see information about it appear in the Summary tab of the main iTunes windows.
5. Click the Restore button. You will be prompted with one or more restore options that may prompt iTunes to automatically download of the latest iPod Software. The 4 possible restore options are:
Restore Option 1: Restore - Restores with same iPod Software version already on iPod.
Restore Option 2: Use Same Version - Restores with same iPod Software version already on iPod, even though a newer version is available.
Restore Option 3: Use Newest Version - Restores with latest iPod Software version on your computer.
Restore Option 4: Restore and Update - Restores with latest iPod Software version on your computer.
6. A message will appear prompting you to enter an administrator's name and password.
7. A progress bar will appear on the computer screen indicating that the first stage of the restore process has started. When this stage is completed, iTunes will instruct you to leave iPod connected to your computer to complete restore.
8. During the stage 2 of the restore process, the iPod will show an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remains connected to the computer or iPod Power adapter during this stage. Note: The progress bar may be difficult to see since the backlight on the iPod display may be off.
9. After stage 2 of the restore process is complete and the iPod is connected to the computer, the iTunes Setup Assistant window will appear asking you to name your iPod and choose your syncing preferences similar to when you connected your iPod for the first time.
Source:
iPod nano (3rd generation) Troubleshooting Assistant
Message was edited by: michael08081

How do i save a calender i have created with the photo and the dates saved on separate pages?

how do i save a calender i have created in photoshop with the photo and the dates saved as two separate pages? when i save as pdf or jpeg they are authomatically saving 1 pg with the photo and dates on one page. This is causing problems when i print.

Hi there, in case your printer cannot print very large, you can also crop down two versions and print them as separate documents.
1) Create a guide where you would like to split the pages by clicking on the ruler (hit command R if they are not showing) and dragging to the desired area.
Creating the guide will make it so you can be precise in the way you split up your page, and so that no part of the image will be repeated or lost.
2) Select the Crop Tool and fit the crop area to the top half of your calendar, using the guide you've just made to snap to the right spot. Hit return to finalize the crop.
3) Go to File > Save As. Name the file something like calendar_top and select the desired file format. Hit "Save."
4) Once you get back to your calendar file, Go to the History panel and select "Drag Guide." This will take you back to the step before you cropped the image.
5) Repeat the steps as before for the bottom half of the calendar, once again using the guide to help you make your crop area.
So then you would just print each of the two pages individually. The images will not be contained within one document, but if you have Acrobat you could combine the files.
I hope this helps!

How to find the source and target systems of an imported Transport Request?

Hello,
How to find the source and target systems of an imported Transport Request?
chinna.

Hi Chinna,
In your landscape the TMS must have configured.Let assume that you have four six systems in the land scape.
DEV->DEV1->QUA->PRD and other two systems (TR1 ,TR2)are at different domain amd both are connected to QUA and the requests are forwarded from there.Here normally the flow willl be from DEV to DEV1, then DEV1 to QUA and QUA to PRD.For other two systems (TR1 ,TR2 )the source system will always be QUA.
Regards
Ashok

HT201210 you are running the latest version of iTunes, have no other USB devices attached, have no security software installed, and are directly connected to your ISP source, simply restarting the computer and the iOS device can clear up certain issues th

you are running the latest version of iTunes, have no other USB devices attached, have no security software installed, and are directly connected to your ISP source, simply restarting the computer and the iOS device can clear up certain issues that could prevent you from restoring. After restarting the computer and iOS device, attempt to restore again.

How big is your library? I would recommend the following troubleshooting steps:
- Backup your library. Always a good idea before messing with things.
- Create a new library.   Refer to this article for details: http://support.apple.com/kb/HT1589. This won't delete your old library, you're just creating a new empty one. Also refer to this article to get back to your old library later.
- Add a few albums into this new library. Not everything, just a small sampling, as a test.
- Activate Match on this new library. You shouldn't have to re-pay, it should just say "Add Computer" or similar.
- At this point, Match should run again. With just a few albums it should complete in just a few minutes.
If iTunes doesn't crash at this point, then likely there's something about your original library that Match doesn't like - what that is I don't know, but at least you'll know it's not your PC.   If iTunes still crashes, then if could be a number of other things, but probably not your library.   My next suggestion (if you haven't already done this) is to uninstall / reinstall iTunes.   If that doesn't work, then my next ideas you won't like.

I have a site using js which works until ff-3.0.a2 build 2007-02-01 and breaks on ff-3.0.a2-build 2007-02-02. I need the source and diff on these builds to debug it

It's a customer password protected site which uses dojo, scriptaculous and several other java scripts. It receives an array into a DIV and then copies portions of this array to the visible area. The user can change the order of the contents in the visible table.
I did a regression test today and could determine the last workable buid as the trunk firefox-3.0a2pre 2007-02-01 and the first broken build as the trunk firefox-3.0.a2pre 2007-02-02.
There is no error on console related to this. Simply the area stays
blank as if there were no data. On the page source the array is loaded but the table is empty. On the workable version, both the array and the table have content.'''bold text'''

Hi people,
I'm back on the issue because I think I did not express my real need. I'm currently using Fedora 8 which was phased out 2 years ago because some old applications doesn't run on newer versions. Fedora 8 died whith ff 2.0.0.19.
Now I'm in process of migration to a newer version and discovered that one of the sites I need to access several times a month does not show a table.
As the moment to migrate is getting closer, I did a regression test since ff4 to ff2 and I discovered that the change happened on the compilation of the firefox 3.0a2pre on the date 2007-02-02.
At the end of january, 2007 there were several changes in the javascript interpreter and I don't know yet if the problem is a bug or a colateral effect of a change to follow some ECMA specification.
So, to continue the investigation, my question is:
'''Where and how can I obtain the sources for the firefox 3.0a2pre compiled in 2007-02-02 and the diff or the source for the same compiled in 2007-02-01?'''
Any tips will be very, very, very welcome!

Capturing the DML changes on the source and writing to a temporary table

Am trying to set up a change data capture where both the source and target would be the same database.
like in my case i would like to capture changes from a table schema.xyz in a orcl database and write it to a temp table within the same database. My concern here is , the table schema.xyz is already replicating to a different database on a different server.
Any ideas on how this can be achieved?
I thought of setting up a different extract process and capture the changes and write to the temp table , but not sure if this is manageable.
Thanks,
Venky.

Just tap into the existing trail if the change data is already there. There's no need to have a second extract in that case. So ADD REPLICAT and specify the EXTTRAIL the same as the EXTTRAIL for the redo log extract.
OGG won't pick up truncates by default. If the row is gone before the update arrives at the target table then you can use INSERTMISSINGUPDATES. When using this parameter make sure that you add supplemental logging (ADD TRANDATA) for columns that you need but that may not be updated (e.g. target columns with NOT NULL or FK constraints).
Good luck,
-joe

How to separate content area from the image area in cs6

how to separate content area from the image area in cs6? looks just fine in design view but when opened up in explorer my text /content area is over the image area. the content is suppose to be below the image not over it. How do I move it down? Everything I have tried has not worked ;(

Is your image in the CSS (background) or the HTML (foreground)?
Try copying and pasting this code into a new, blank document. Change placehold.it images to your own. Save and preview in browsers.
<!doctype html>
<html>
<head>
<meta charset="utf-8">
<title>HTML5 with CSS 2-Col Layout</title>
<meta name="viewport" content="width=device-width, initial-scale=1">


<style>
/**CSS Reset**/
    padding: 0;
    -webkit-box-sizing: border-box;
    -moz-box-sizing: border-box;
    box-sizing: border-box;
img {
    width: 100%;
    vertical-align: baseline;
/**Layout**/
body {
    padding: 0;
    width: 90%; /**adjust width in px or % as desired**/
    margin: 0 auto; /**this is centered**/
    background: #CFF;
    color: #505050;
    font-family: Segoe, "Segoe UI", "DejaVu Sans", "Trebuchet MS", Verdana, sans-serif;
    font-size: 100%;
    box-shadow: 2px 2px 4px #333;
header {
    margin: 0;
    padding: 0 1%;
    width: 100%;
    background: #B00202;
    color: #FFF;
/**top menu**/
nav {
    background: #EAEAEA;
    font-family: Gotham, "Helvetica Neue", Helvetica, Arial, sans-serif;
    font-size: 14px;
    font-weight: bold
nav ul {
    margin: 0;
    padding: 0;
nav li {
    list-style: none;
    display: inline-block;
    margin: 0 3% 0 5%;
/**menu link styles**/
nav li a {
    color: #666;
    text-decoration: none;
    line-height: 2.5em;
    padding: 6px;
    border: 1px solid #CCC;
/**on select or mouseover**/
nav li a:hover, nav li a:active, nav li a:focus {
    background: #CCC;
    color: #505050;
#wrapper {
    background: #EAEAEA;
    overflow: hidden; /**float contaiment**/
/**main content**/
article {
    padding: 0 2%;
    background: #FFF;
    float: left;
    width: 70%;
figure {
    width: 80%;
    margin: 4% auto 4% auto;
    text-align: center;
/**right sidebar**/
aside {
    padding: 0 2%;
    float: left;
    width: 30%;
footer {
    clear: both;
    background: #B00202;
    color: #FFF;
    text-align: center;
    margin: 0;
/**typography**/
header h1, header h2 {
    display: inline;
    color: #F5DD83;
    padding: 0 1%;
h3 {
    color: #2294AE;
    margin-bottom: 0
p { margin: 0 0 1em 0 }
figcaption {
    text-align: center;
    font-style: oblique;
    font-size: small;
    color: #2294AE;
</style>
</head>
<body>

<header> <h1>Sitename</h1>
<h2>| Responsive CSS Layout</h2>
</header>

<nav>
<ul>
<li><a href="#">Menu Item1</a></li>
<li><a href="#">Menu Item1</a></li>
<li><a href="#">Menu Item1</a></li>
<li><a href="#">Menu Item1</a></li>
<li><a href="#">Menu Item1</a></li>
</ul>
</nav>
<div id="wrapper">

<img class="banner" src="http://placehold.it/1056x100/198EBA/FFFFFF&text=Banner.jpg" alt="banner" />
<article> <h3>Article</h3>
<p>Lorem ipsum dolor sit amet, consectetur adipiscing elit. Mauris vitae libero lacus, vel hendrerit nisi! Maecenas quis velit nisl, volutpat viverra felis. Vestibulum luctus mauris sed sem dapibus luctus. Pellentesque aliquet aliquet ligula, et sagittis justo auctor varius. Quisque varius scelerisque nunc eget rhoncus. Aenean tristique enim ut ante dignissim. </p>
<figure> <img src="http://placehold.it/500x325" alt="placeholder">
<figcaption>Figure 2 Caption</figcaption>
</figure>
</article>

<aside> <h3>Aside</h3>
<p>Lorem ipsum dolor sit amet, consectetur adipiscing elit. Mauris vitae libero lacus, vel hendrerit nisi! Maecenas quis velit nisl, volutpat viverra felis. Vestibulum luctus mauris sed sem dapibus luctus. </p>
<hr>
<p>Pellentesque aliquet aliquet ligula, et sagittis justo auctor varius. Quisque varius scelerisque nunc eget rhoncus. Aenean tristique enim ut ante dignissim. </p>
<hr>
<p>Pellentesque aliquet aliquet ligula, et sagittis justo auctor varius. Quisque varius scelerisque nunc eget rhoncus. Aenean tristique enim ut ante dignissim. </p>
</aside>
</div>

<footer> <small>© 2014 Your Site Name. All rights reserved</small> </footer>
</body>
</html>
Nancy O.

Connecting the source and target schemas to ODI

Hi ,
I have recently started learning ODI tool for data integration. I need to use this tool as a part of Deal Management product related work.
I have gone thru the documentation available in OTN for ODI. they were describing everything using the demo environment.
problem:
Can any one please tell me how to connect source schema and target schema to the ODI ...?
Both the source and target schema are in the Oracle database of the loaclhost.

Hi,
Right Click ur Dataserver , In the bottom u will have option insert physical schema.
Click that u will have window opened........
In the Definition Tab:
Specify ur Schema name and Work schema .......u r going to use .
Enable the default option also....
In Context Tab:
Specify ur context Name and Type in the Name u want to have for ur logical Schema, it autmatically creates the logical schema ...for u.
and click ok .
hope it helps u.....
Thanks
AK

I want to write a script or Automator workflow/app that emails a random shortcut of the day to three recipients. The source is from an Excel spreadsheet. One column is the shortcut, and the second column is the definition. Anyone have experience?

I want to write a script or Automator workflow/app that automatically emails a random shortcut of the day to three recipients. The source is from an Excel spreadsheet. One column is the shortcut, and the second column is the definition. Anyone have similar experience and know that this would work?

I have had a first stab at the script, below. It uses a file to store the shortcuts and command [descriptions]. You should be able to see from the script annotations how to add a new one. (I populated 1-4 with real data, but got lazy after that, so you have a few placeholders to work with first.
As I have noted, once you are happy that you have all the data in the file, you can comment out part of the script for ongoing use. (BTW, my reluctance to use Excel is that I don't currently have it installed and I don't want to offer wrong advice. If you have Numbers, I do have that and could probably modify to work with a spreadsheet from there. This might be especially useful if you have the data already sitting in Excel.)
A few things came-up whilist I was writing the script:
1.     Currently, all recipients will not only get the same tip at the same time, but they will see the names and email addresses of the others who receive them. It is possible to modify this.
2.     I have added a property gRandomCheck which keeps track of which shortcut has already been used (since the last time the script was compiled. This will prevent the same tip being sent more than once.    When all tips have been sent once, the script will alert you and not send anything until reset. It does not check on a per-addressee basis (which would be a refinement). (If you add a new addressee at this stage, the whole process will start again, and you may not really want this to be the behaviour.)
3.     The way that I have built the list, commandList, is deliberately cumbersome - it's for the sake of clarity. If you prefer, you can construct the whole list as {{shortcut:"X", command:"X"}, {shortcut:"Y", command:"Y"}}
Have a look - I am sure you will have questions!
SCRIPT STARTS HERE Paste the following lines (thru the end) into a new AppleScript Editor document and press RUN
--The property gRandomCheck persists between runs and is used to stop sending the same hint twice.
property gRandomCheck : {}
--I am defining a file on the desktop. It doesn't have to be in this location
set theFolder to path to desktop
set commandFile to (theFolder as text) & "CommandFile.csv"
--(* Unless you need to change the file contents you do not need to write to it each time. Remove the "--" on this line and before the asterisk about 18 lines below
--Follow this format and enter as many records as you like on a new line - each with a unique name
set record1 to {shortcut:"Z", command:"Undo"}
set record2 to {shortcut:"R", command:"Record"}
set record3 to {shortcut:"⇧R", command:"Record Toggle"}
set record4 to {shortcut:"⌘.", command:"Discard Recording & Return to Last Play Position"}
set record5 to {shortcut:"X", command:"x"}
set record6 to {shortcut:"X", command:"x"}
set record7 to {shortcut:"X", command:"x"}
set record8 to {shortcut:"X", command:"x"}
set record9 to {shortcut:"X", command:"x"}
set record10 to {shortcut:"X", command:"x"}
set record11 to {shortcut:"X", command:"x"}
set record12 to {shortcut:"X", command:"x"}
set record13 to {shortcut:"X", command:"x"}
--Make sure you add the record name before randomCheck:
set commandList to {record1, record2, record3, record4, record5, record6, record7, record8, record9, record10, record11, record12, record13}
--This part writes the above records to the file each time.
set fileRef to open for access commandFile with write permission
set eof of fileRef to 0
write commandList to fileRef starting at eof as list
close access fileRef
--remove "--" here to stop writing (see above)*)
--This reads from the file
set fileRef to open for access commandFile with write permission
set commandList to read fileRef as list
close access fileRef
--Here's where the random record is chosen
set selected to 0
if (count of gRandomCheck) is not (count of commandList) then
          repeat
                    set selected to (random number from 1 to (count of commandList))
                    if selected is not in gRandomCheck then
                              set gRandomCheck to gRandomCheck & selected
                              exit repeat
                    end if
          end repeat
else
          display dialog "You have sent all shortcuts to all recipients once. Recompile to reset"
          return
end if
--This is setting-up the format of the mail contents
set messageText to ("Shortcut: " & shortcut of record selected of commandList & return & "Command: " & command of record selected of commandList)
tell application "Mail"
--When you're ready to use, you probably will not want Mail popping to the front, so add "--" before activate
activate
--You can change the subject of the message here. You can also set visible:true to visible:false when you are happy all is working OK
          set theMessage to (make new outgoing message with properties {visible:true, subject:"Today's Logic Pro Shortcut", content:messageText})
          tell theMessage
--You can add new recipients here. Just add a new line. Modify the names and addresses here to real ones
                    make new to recipient with properties {name:"Fred Smith", address:"[email protected]"}
                    make new to recipient with properties {name:"John Smith", address:"[email protected]"}
--When you are ready to start sending, remove the dashes before "send" below
--send
          end tell
end tell

How can I change the tempo (and the snap grid) of the project without altering the duration of the original audio clips?

This question is for Logic Express.
I have many very short audio clips that I recorded into my project.
I want to adjust the project tempo so that I can use the snap grid to make a beat out of my short audio clips. But when I change the project tempo, it automatically adjusts the lengths of my audio clips.
So how can I change the tempo (and the snap grid) of the project without altering the original audio clips?

The reason some files sound funny and others don't is because audio is handled a few different in Garageband depending on it's source (audio your recorded vs Apple Loops vs non Apple Loop pre recorded audio). Each of these have different color regions with different properties. I just found this thread that might better explain it:
http://hintsforums.macworld.com/archive/index.php/t-67538.html
I hope that helps!

How to log in with my old Apple account? I forgot my pass and I did change my apple ID before canceling first?? I am from Croatia so did folow al the discussion and the to resolve the problem but no luck. Can not call from Croatia the Apple help desk

How to log in with my old Apple account? I forgot my pass and I did change my apple ID before canceling first?? I am from Croatia so did folow al the discussion and the to resolve the problem but no luck. Can not call from Croatia the Apple help desk.i did try all the options but I can not find the phone number to call from Croatia,
I can not change my Apple ID to the old mail (not possible!)
The old mail don't accept the new password..
I can not delete the Icloud all the time asking my the password of the old mail!
I realy need help

You can not merge accounts.
Apps are tied to the Apple ID used to download them, you can not transfer them.

How to separate the source and the measured current

Similar Messages

Maybe you are looking for