How to set a query of VO in Best-Effort Mode

Hi, I'm using auto refresh property of VO, to refresh the LOV . But i get " java.sql.SQLException: ORA-29983: Unsupported query for Continuous Query Notification" error..
So i want to set the query in best-effort-mode . May i know how to set it.
here is my query that set to auto refresh.
"SELECT DISTINCT YYYY FROM XXXXX"
Query optimizer makes the above one as below.
SELECT * FROM (SELECT DISTINCT YYYY FROM XXXXX) QRSLT WHERE ( ( (YYYY LIKE :vc_temp_1 ) ) )

If you disconnect the PMU, you will have the option to go to tristate or your previous digital state, but not ground. Forcing 0V is probably the closest you can get to a GND like behavior. The default line state is tristate for this device, which will leave the line floating if there is no active driver.
Kyle A.
National Instruments
High Speed Digital I/O Product Support Engineer - R&D

Similar Messages

How to set multiple query names to BIApplicationFrame?

Hi,
I have to integrate BI reports in webdynpro.For this purpose i am using BI Application Frame UI element.
From BW if there is one query for one templet i am setting the following properties like ......
dataproviderstatename - xxxxxxxx(queryname)
dataproviderstatetype   - query
Servername                 - url
templetid                     - XXXXXX(TempletName)
The report is working fine.
Now my requirement is changed like the following way
From BW if there are 2 queries for one templet, then how to set the value for dataproviderstatename?
dataproviderstatename - ????
dataproviderstatetype   - query
Servername                 - url
templetid                     - XXXXXX(TempletName)
I have to display the above BW report containing multiple queries in one BIApplicationFrame.
appreciate any help.
Thanks
Madhu

solved

How to set up Query Logging in OBIEE 11g 11.1.1.6

Hi all,
I couldn't find the option for setting up the query logging for testing and debugging purpose. Could anyone plz help me in this ...
Regards,
Arun

Hi Arun,
For simplicity I'll direct you to a link http://obiee11gqna.blogspot.com.au/2011/04/obiee-11g-query-log-log-level.html
Richard

How to set vo query at run time

Hi,
Is it possible to bind the where clause of query at run time.
N :)

Hi,
Yes its possible.
To add new where clause to your query.
vo.setWhereClause(null);//If you want to remove any existing programmatically added where clause.
vo.setWhereClause("Your new query");
To bind varibales (Say there are 2 bind variables),
First way to achieve this.
setWhereClauseParam(null); //Always reset it to remove existing bindings)
setWhereClauseParam(0, "Your first paramter value"); // Second parameter "Your first paramter value" is of type object.
setWhereClauseParam(1, "Your first paramter value");
In case you use "?" styly type binding, this count in above method starts with 1 instead of 0.
Second way is to put all bind variables in an object array and pass to above method.
Vector params=new Vector(2);
params.addElement("FirstParameter");
params.addElement("SecondParameter");
Now call vo.executeQuery() to fetch the results as per new query.
Abdul Wahid

How to set the read order in ADF under screenreader mode?

Hi,
I am working on the FUSION FUSE about ACCESSIBILITY: LINEARISE NUMBERING. I meet a requirement that set a button with 200 number which make it as the LAST read one in the whole page. Currently the read order is from left to right, top to bottom. so need help on this. Thanks a lot.
Below is the detail requirement:
More Details button (which takes the user into Fusion apps) needs to be a higher # (in the 200+) for Linearize. Linearize is a tool that indicates in which order (numerically),the words on the page are 'read out' to a blind user. We'd want to have that More Details button be the last thing that is read on the page. Ergo, let's give it the highest #.
Thanks.

Hi,
as this forum is public and not Oracle Fusion Apps related (people here don't know what you are talking about when you say "Fusion Fuse") I suggest you ask this question to your internal Oracle peers.
Frank

How to Set Checkbox of ALV Grid Dark on Display Mode

    ABAP experts, I want to switch between display mode and edit mode for some columns of ALV Grid. So I set "LVC_S_FCAT-EDIT" "X" for the columns which need to switch mode, and use method "SET_READY_FOR_INPUT" to switch.
    Currently, the function of switch mode has been achieved. But icons of checkbox columns are light but not dark when display mode, although the columns can't be edited. (Please refer to the image below.) I want to make checkbox columns dark as other columns on display mode.
    I tried to use "CL_GUI_ALV_GRID=>MC_STYLE_ENABLED" and "CL_GUI_ALV_GRID=>MC_STYLE_DISABLED", but failed. I also studied sample program "BCALV_EDIT_05" which is related to checkbox in ALV Grid, and compared my program with this program. But I still have not found problems.
    Help me solve this problem, please.
    Part of my codes are as follows.
    Part 1:
IF iv_is_create_group = abap_true OR iv_is_edit_group = abap_true.
       set_enable( iv_flag = 1 ).
       LOOP AT gt_acct_group_item ASSIGNING <lfs_acct_group_item>.
         CLEAR ls_celltab.
         IF <lfs_acct_group_item>-celltab IS INITIAL.
           CLEAR ls_celltab.
           ls_celltab-fieldname = 'CHECK_BOX'.
           ls_celltab-style = cl_gui_alv_grid=>mc_style_enabled.
           APPEND ls_celltab TO <lfs_acct_group_item>-celltab.
           CLEAR ls_celltab.
           ls_celltab-fieldname = 'XPORE'.
           ls_celltab-style = cl_gui_alv_grid=>mc_style_enabled.
           APPEND ls_celltab TO <lfs_acct_group_item>-celltab.
         ELSE.
           LOOP AT <lfs_acct_group_item>-celltab ASSIGNING <lfs_celltab>.
             <lfs_celltab>-style = cl_gui_alv_grid=>mc_style_enabled.
           ENDLOOP.
         ENDIF.
       ENDLOOP.
     ELSE.
       set_enable( iv_flag = 0 ).
       LOOP AT gt_acct_group_item ASSIGNING <lfs_acct_group_item>.
         IF <lfs_acct_group_item>-celltab IS INITIAL.
           CLEAR ls_celltab.
           ls_celltab-fieldname = 'CHECK_BOX'.
           ls_celltab-style = cl_gui_alv_grid=>mc_style_disabled.
           APPEND ls_celltab TO <lfs_acct_group_item>-celltab.
           CLEAR ls_celltab.
           ls_celltab-fieldname = 'XPORE'.
           ls_celltab-style = cl_gui_alv_grid=>mc_style_disabled.
           APPEND ls_celltab TO <lfs_acct_group_item>-celltab.
         ELSE.
           LOOP AT <lfs_acct_group_item>-celltab ASSIGNING <lfs_celltab>.
             <lfs_celltab>-style = cl_gui_alv_grid=>mc_style_disabled.
           ENDLOOP.
         ENDIF.
       ENDLOOP.
     ENDIF.
     CALL METHOD gr_grid->refresh_table_display
*      EXPORTING
*        is_stable      =
*        i_soft_refresh =
       EXCEPTIONS
         finished       = 1
         OTHERS         = 2
     IF sy-subrc <> 0.
*     Implement suitable error handling here
     ENDIF.
    Part 2:
METHOD set_enable.
     gr_grid->set_ready_for_input(
         i_ready_for_input = iv_flag
ENDMETHOD.

Hi Liu,
    Please go through the below code.
*& Report YEDIT_DISPLAY
REPORT YEDIT_DISPLAY.
TABLES : VBAK.
TYPE-POOLS SLIS.
TYPES : BEGIN OF TY_VBAK,
          VBELN TYPE VBAK-VBELN,
         END OF TY_VBAK,
         BEGIN OF TY_FINAL,
           BOX TYPE C,
           VBELN TYPE VBAK-VBELN,
         END OF TY_FINAL.
DATA : IT_VBAK TYPE TABLE OF TY_VBAK,
        WA_VBAK TYPE TY_VBAK,
        IT_FINAL TYPE TABLE OF TY_FINAL,
        WA_FINAL TYPE TY_FINAL,
        IT_FCAT TYPE TABLE OF SLIS_FIELDCAT_ALV,
        WA_FCAT TYPE SLIS_FIELDCAT_ALV.
START-OF-SELECTION.
   PERFORM FETCH_DATA.
   PERFORM FCAT_DATA.
   PERFORM DISPLAY.
*&      Form FETCH_DATA
*       text
* --> p1        text
* <-- p2        text
FORM FETCH_DATA .
   SELECT VBELN INTO TABLE IT_VBAK FROM VBAK UP TO 10 ROWS.
   LOOP AT IT_VBAK INTO WA_VBAK.
     WA_FINAL-VBELN = WA_VBAK-VBELN.
     APPEND WA_FINAL TO IT_FINAL.
     CLEAR : WA_FINAL , WA_VBAK.
   ENDLOOP.
ENDFORM.                    " FETCH_DATA
*&      Form FCAT_DATA
*       text
* --> p1        text
* <-- p2        text
FORM FCAT_DATA .
   WA_FCAT-COL_POS = 1.
   WA_FCAT-FIELDNAME = 'BOX'.
   WA_FCAT-TABNAME = 'IT_FINAL'.
   WA_FCAT-OUTPUTLEN = '3'.
   WA_FCAT-SELTEXT_M = 'BOX'.
   wa_fcat-checkbox = 'X'.
   WA_FCAT-EDIT = 'X'.
   APPEND WA_FCAT TO IT_FCAT.
   CLEAR WA_FCAT.
   WA_FCAT-COL_POS = 2.
   WA_FCAT-FIELDNAME = 'VBELN'.
   WA_FCAT-TABNAME = 'IT_FINAL'.
   WA_FCAT-OUTPUTLEN = '3'.
   WA_FCAT-SELTEXT_M = 'Sales Document'.
   APPEND WA_FCAT TO IT_FCAT.
   CLEAR WA_FCAT.
ENDFORM.                    " FCAT_DATA
*&      Form DISPLAY
*       text
* --> p1        text
* <-- p2        text
FORM DISPLAY .
   CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
*   I_INTERFACE_CHECK                 = ' '
*   I_BYPASSING_BUFFER                = ' '
*   I_BUFFER_ACTIVE                   = ' '
      I_CALLBACK_PROGRAM                = SY-REPID
*   I_CALLBACK_PF_STATUS_SET          = ' '
    I_CALLBACK_USER_COMMAND           = 'USER_COMMAND'
*   I_CALLBACK_TOP_OF_PAGE            = ' '
      IT_FIELDCAT                       = IT_FCAT
*   I_DEFAULT                         = 'X'
*   I_SAVE                            = ' '
     TABLES
       T_OUTTAB                          = IT_FINAL
* EXCEPTIONS
*   PROGRAM_ERROR                     = 1
*   OTHERS                            = 2
   IF SY-SUBRC <> 0.
* Implement suitable error handling here
   ENDIF.
ENDFORM.                    " DISPLAY
FORM USER_COMMAND USING UCOMM TYPE SY-UCOMM
                         RTAB TYPE slis_selfield.
   CASE UCOMM.
     WHEN '&IC1'.
       MESSAGE 'SUCESSFUL' TYPE 'S'.
     WHEN '&DATA_SAVE'.
       PERFORM FIL_FCAT.
       PERFORM DISPLAY1.
     WHEN 'BACK'.
       LEAVE TO SCREEN 0.
     WHEN OTHERS.
       LEAVE TO SCREEN 0.
   ENDCASE.
ENDFORM.
*&      Form FIL_FCAT
*       text
* --> p1        text
* <-- p2        text
FORM FIL_FCAT .
CLEAR IT_FCAT.
   WA_FCAT-COL_POS = 1.
   WA_FCAT-FIELDNAME = 'BOX'.
   WA_FCAT-TABNAME = 'IT_FINAL'.
   WA_FCAT-OUTPUTLEN = '3'.
   WA_FCAT-SELTEXT_M = 'BOX'.
   wa_fcat-checkbox = 'X'.
** WA_FCAT-EDIT = 'X'.
   APPEND WA_FCAT TO IT_FCAT.
   CLEAR WA_FCAT.
   WA_FCAT-COL_POS = 2.
   WA_FCAT-FIELDNAME = 'VBELN'.
   WA_FCAT-TABNAME = 'IT_FINAL'.
   WA_FCAT-OUTPUTLEN = '3'.
   WA_FCAT-SELTEXT_M = 'Sales Document'.
   APPEND WA_FCAT TO IT_FCAT.
   CLEAR WA_FCAT.
ENDFORM.                    " FIL_FCAT
*&      Form DISPLAY1
*       text
* --> p1        text
* <-- p2        text
FORM DISPLAY1 .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
*   I_INTERFACE_CHECK                 = ' '
*   I_BYPASSING_BUFFER                = ' '
*   I_BUFFER_ACTIVE                   = ' '
      I_CALLBACK_PROGRAM                = SY-REPID
*   I_CALLBACK_TOP_OF_PAGE            = ' '
      IT_FIELDCAT                       = IT_FCAT
*   I_DEFAULT                         = 'X'
*   I_SAVE                            = ' '
     TABLES
       T_OUTTAB                          = IT_FINAL
* EXCEPTIONS
*   PROGRAM_ERROR                     = 1
*   OTHERS                            = 2
   IF SY-SUBRC <> 0.
* Implement suitable error handling here
   ENDIF.
ENDFORM.                    " DISPLAY1
Here i written code under the SAVE button , if requires you create your own status and apply.
Regards,
Krishna

How to set the option Bit-mapped indexes to true ?

Hi,
I a not a an Oracle Administrator. Usually, I just use Oracle as developper. I have got a Oracle 10g database. I can not import data in my database because the Bit-mapped options is not set.
When I type
select banner from v$version
I get this result :
BANNER
Oracle Database 10g Release 10.2.0.1.0 - Production
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for Linux: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
I run the import and I get this error :
IMP-00017: following statement failed with ORACLE error 439:
"CREATE BITMAP INDEX "ID_ACC_DO" ON "ES_AUDIT_CONNEXION_ARCH" ("DATE_OUVERTU"
"RE" ) PCTFREE 10 INITRANS 2 MAXTRANS 255 STORAGE(INITIAL 33554432 FREELIST"
"S 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT) TABLESPACE "IND_XL" LOGGING"
IMP-00003: ORACLE error 439 encountered
ORA-00439: feature not enabled: Bit-mapped indexes
I typed the command :
SELECT * FROM V$OPTION WHERE PARAMETER LIKE 'Bit-mapped%';
I get the result :
PARAMETER
VALUE
Bit-mapped indexes
FALSE
How to set this parameter to true ?
Best regards,
Xavier

I beleiev that you are on Standard Edition.Bitmap indexes can be used only when you are working with Enterprise edition.
SQL> select * from V$option where parameter like '%Bit%';
PARAMETER
VALUE
Bit-mapped indexes
TRUE
SQL> select * from V$version;
BANNER
Oracle Database 11g *Enterprise Edition* Release 11.1.0.6.0 - Production
PL/SQL Release 11.1.0.6.0 - Production
CORE 11.1.0.6.0 Production
TNS for 32-bit Windows: Version 11.1.0.6.0 - Production
NLSRTL Version 11.1.0.6.0 - Production
SQL>I guess you see the entry coming of Enterprise Edition in my banner.This is missing in your V$version, so you are using Standard Edition install.
You need to move to Enterprise edition to use Bitmap Indexes.
HTH
Aman....
Edited by: Aman.... on Dec 11, 2008 3:09 PM
added a little more.

In UNIX how to set classpath

I know nothing about UNIX. pls kindly give me some instruction on how to set classpath in UNIX, thanks!

best way is to set in your .profile (name differs between different shells, but whatever the OS/Shell is, it should starts with . and has a 'profile' string in the name). Try ls -a to find the file, edit it, insert lines like this:
CLASSPATH=xxxx
export CLASSPATH
Use : to seperate different path/files.
then every time when you log in, the classpath is setted.
if you already logged in, use the above lines in command line, but it only set class path of the current shell/console.
anyway, you should learn Unix before you do anything, or you'll have more trouble. do a search in yahoo or google to find on line tuturials, and SUN's Java tuturial has some basic instructions on how to use Java in Unix.

How to set a sub-role invisible from the role

Hi guys,
Our roles are as following:
Role1
App1
App2
SubRole1
SubApp1
SubApp2
We've assigned SubRole1 to Role1, but we don't want it is shown under Role1, how to set it?
Many Thanks and Best Regards,
Xiaoming Yang

Hi,
If you do not need these applications/iViews in the navigation hierarchy, then you do not have to do any fancy tricks.
If all Role1 users should get subRole1 iViews, then just have one role and make those iViews invisible.
If you want to be able to assign the iViews in subrole1, just create a second role with no entry point (it does not need to be a subrole) and set the permissions so there is no end user permission, and then assign it to users.
Hope that helps.
Daniel

How to set the table input in Query template?

Hi all.
I need to call a Bapi_objcl_change, with import parameter and a table as an input. I have done this, in BLS. I have set the table input in the
form of xml. In BLS, I get the output(the value gets change in SAP R3, what i have given in BLS). But if i set the same xml structure in
query template, I didn't get the output. Table input parameter does not take that xml source. How to set the table input in Query template?
can anyone help me?
Regards,
Hemalatha

Hema,
You probably need to XML encode the data so that it will pass properly and then xmldecode() it to set the BAPI input value.
Sam

How to set fetchsize of sql Query when using Database Adapter.

Hi All,
I am using DatabaseAdapter to connect to database and retriving huge amount of data.For improvement in the performance I want to set the "fetchsize" of sql query. I know fetchsize can be preset in Java using Jdbc 2.0 API.Please let me know how to set this value in BPEL when using DBAdapter?
Thanks
Chandra

I talked to the developer of the db adapter - and he told me this feature will be available in BPEL PM 10.1.3 (which is supposed to be production later this year, and a public beta soon). If this is an emergency I would recommend going throug Oracle support and have them file an enhancement for 10.1.2.0.2
hth clemens

How to set a bind variable into a vo query from the current vo ?

I would like to exclude from my list of values defined in a view object the already referenced items in the current view object content.
Let's say i have dept and emp with a many to many relationships, I would like that the already existing dept for emp not listed (excluded) in the list of values for emp.
Do i need to define a bind parameters and set it during search or is it possible to use an expression that will refer the current row attribute representing the dept ?
I didn't find an example or explanation how to set bind parameters defined in a view object query from seach pages or list of values ui components. May be somebody know how to find the info.
Thank you

I think that bind variable accessors in the VO class is what you need. You can override the getter method of the bind variable "LocaleCode2" in order to return the first 2 chars from the bind variable "LocaleCode". Have a look at this blog post for details:
http://jdeveloperandadf.blogspot.com/2011/03/custom-java-bind-variable-in-where.html
Dimitar

How to set input ready query to display mode as default when open workbook?

Dear All,
Hi, i have a question here about IP query.
as my current situation, my workbook included one input ready query, therefore, when i open my workbook which default is Edit mode which mean all value can be edited.
but, i want it to display mode when open workbook, and i already have a edit button, if i want to edit the value i will use Edit button, so, i wan it as display mode when i first open workbook.
so, can anyone tell me how to set it as display mode when open workbook which included input ready query?
Regards
wenlong
Thanks a million

in Data Provide Specfici commad
Edit
Dsiplay
Filter command
Assigen Query /Query view
pls select Edit then save

How to set paramters through Query manager.

Hi,
I need to get Parameters when we are executing SQL Query through Query Manager.
In Query manager how to set prompt window for parameters.
Below I applied parameters for from date and to date but its showing error. How to set parameters prompt window.
SELECT     OJDT.TransId, OJDT.Number,NNM1.SeriesName,ojdt.baseref as BaseRefNumber, JDT1.Account,JDT1.StornoAcc,OACT.AcctName,jdt1.credit,jdt1.debit, jdt1.profitcode as [Customer/Vendor],JDT1.OcrCode2 as [Region/Location] , JDT1.OcrCode3 as Department,
                      JDT1.OcrCode4 as [Core/Deputees/DailyWage/General], JDT1.OcrCode5 as [SubAccofCA&CL],OJDT.RefDate, OJDT.Project,jdt1.project
FROM         OJDT
INNER JOIN JDT1 ON OJDT.TransId = JDT1.TransId
INNER JOIN OACT on OACT.AcctCode=JDT1.Account
INNER JOIN NNM1 ON OJDT.Series = NNM1.Series
where ojdt.transType=30 and ojdt.refdate >= '[%0]' AND ojdt.refdate <= '[%1]'
Please guide me.
Regds,
Sampath kumar devunuri.

hi sampath,
Try this query
SELECT T0.TransId, T0.Number,T3.SeriesName,T0.baseref as BaseRefNumber, T1.Account,T1.StornoAcc,T2.AcctName,T1.credit,T1.debit, T1.profitcode as CustomerVendor,T1.OcrCode2 as RegionLocation , T1.OcrCode3 as Department,
T1.OcrCode4 as CoreDeputeesDailyWageGeneral, T1.OcrCode5 as SubAccofCACL,T0.RefDate, T0.Project,T1.project
FROM dbo.OJDT T0
INNER JOIN JDT1 T1 ON T0.TransId = T1.TransId
INNER JOIN OACT T2 on T2.AcctCode=T1.Account
INNER JOIN NNM1 T3 ON T0.Series = T3.Series
where
T0.transType='30' and CAST(T0.refdate AS datetime) BETWEEN '[%0]' AND '[%1]'
Jeyakanthan

How to set input ready query cell is different color?

Dear All
Hi, everyone, hereby i have a IP question.
i would like to know, how to set the input ready query's cell different color between those cell which is unable to change value one in workbook..?
Example :
For my workbook which have a input ready query,
i have 4 rows for my input ready query report.
For the first row which is not input ready cell and unable to change any value for the cell, then following rows's cell can be change value,
so, i would like to make first row's color cell different with following row's cell.
In additional, all value of cell is initial zero.
therefore, is there any mehtod to make different color between able cell and unable cell?
Thanks a million.
Regards,
WenLong.

Cells in the input ready query result have different styles given by SAP. All rows will have one style, column headings will have one style whereas input ready cells will have one style. If you are in Excel 2003, put cursor in the input ready cell, goto format -> style, you can see one BeX style attached to that cell, apply watever color you want for that style, save the workbook. If you do this for one cell, it will be applied to all the input ready cells by default. In the same way you can give different color to the non input ready cell styles. In Excel 2007, Cell styles are available in Home -> Cell styles. Here you can see all Bex related styles.

How to set a query of VO in Best-Effort Mode

Similar Messages

Maybe you are looking for