How to set cookie expire time

Hi I'm new to jsp,
please tell anybody, how to set cookie expire time.
I know about setMaxAge(); but my requirement is set the expire time until close the browser or logout.
And one more thing is how to delete cookies while logout.
Thanks in advance
achchayya.

Hey,
I understand what you are trying to say. solution is simple dont set setMaxAge , just create cookie and use it. It will be valid till you close the browser.
Regards,
SRI

Similar Messages

How to set the expiration time for a namedcache programmatically?

I have a named cache with near cache configuration and no expiration specified in the cache-config. The backing map which is a distributed scheme has a size limited eviction policy but no expiration. I have an algorithm to determine the expiry delay of this named cache at run time. How can I set this delay programmatically on the named cache?
Thanks
Sairam

Hi Sairam,
You would need to get the backing map for the cache and then set the expiry on the backing map; assuming that the backing map supports expiry.
For example:
NamedCache cache = CacheFactory.getCache("test");
CacheService service = cache.getCacheService();
DefaultConfigurableCacheFactory.Manager bmm = (DefaultConfigurableCacheFactory.Manager) service.getBackingMapManager();
Map bm = bmm.getBackingMap("test");
if (bm instanceof ConfigurableCacheMap)
System.out.println("Setting expiry delay");
((ConfigurableCacheMap) bm).setExpiryDelay(100000);
-John

How to set the expiry time of an image

how to set the expiry time of an image from within the servlet or jsp

I am sending an image with the page, so the set the page expiry in the browser cache we can use META tags of html or response.setDateHeader to set the Expires attribute, this setting the expiry time of the page but is not setting the expiry time of the image which is going with the page

How to set cookie value in one page and retrieve in another page using setA

How to set cookie value in one page and retrieve in another page using setActionListener?
I have tried with following code srcpage.jspx->destpage.jspx
srcpage.jspx
<af:table value="#{bindings.DepartmentsView1.collectionModel}"
var="emp" rows="#{bindings.EMPView1.rangeSize}"
first="#{bindings.EMPView1.rangeStart}"
emptyText="#{bindings.DepartmentsView1.viewable ? 'No rows yet.' : 'Access Denied.'}">
<af:column sortProperty="EmployeeName" sortable="false"
headerText="Cookie Testing">
<af:commandLink text="#{emp.EmployeeName}" action="success">
<af:setActionListener from="#{emp.EmployeeName}"
to="#{cookie}"/>
</af:commandLink>
</af:column>
</af:table>
espage.jspx
<af:outputText value="Test Cookie Value: #{cookie}"/>
,Here Test Cookie Value prints the following instead of its original String value
{JSESSIONID=javax.servlet.http.Cookie@7da288, oracle.uix=javax.servlet.http.Cookie@399f62}
I have passed employee name "Robert" to cookie in srcpage.jspx,but it prints "JSESSIONID....." instead of "Robert" in destpage.jspx
Thanks in advance
Kalee

Hi,
"cookie" is a reserved name. If you want to write to a session scope attribute called "cookie" then you have to call #{sessionScope.cookie}. If you want to use EL to set and read from cookies then you will have to use
#{cookie.cookieName}
Note that #{cookie} writes to and returns a map
check this: http://www.informit.com/articles/article.aspx?p=30946&seqNum=7
Frank

How to Set Automatic Default Time in Calendar

Friends,
When I create new event in calendar (by double clicking on a specific date) for example Group Dinner, the calendar autotatically set the start time at 8PM.
How to set the default time to 7PM for example.
Thanks
Regards,
akostaman

Ok It seems not just a problem of 24 hour time appointments that won't sync but all appointments I make on my iphone in calendar won't sync to calendar on my mac?

How to set date and time on apple tv

how to set date and time on apple tv

Assuming this is not the first time you have used your Apple TV
    1.    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
    2.    Also try restarting the router.
    3.    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If this is a new Apple TV, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

How to set password expiration for EBS users

how to set password expiration for EBS users .
Regards .

Please follow below steps:-
This is available starting in RUP4.
The script to expire all passwords in the fnd_user table is $FND_TOP/patch/115/sql/AFCPEXPIRE.sql.
It can be executed from SQL*Plus or as a Concurrent Program: sqlplus -s APPS/ @AFCPEXPIRE.sql
or Submit concurrent request: CP SQL*Plus Expire FND_USER Passwords
This script sets the fnd_user.password_date to null for all users which causes all user passwords to expire.The user will need to create a new password upon the next login.
Thanks,
JD

How to set dynamic expiration date in User Task

Hi
I need to set the expiration date of a User Task to a specific date, not a duration. Is it possible to do this?

I have also got a smiliar problem. Does anyone have any further information to how this can be achieved?
I have been able to use the Human Task Wizard screen (<usertask>.task) to hard code the expiration time. Using the Fixed Duration option of days, hours or minutes. I have tried to use the 'By Expression' to do this but have been unable to get it to work. I have tried to select the /task:task/task:systemAttributes/task:expirationDuration or the /task:task/task:systemAttributes/task:expirationDate element within the task workflow xsd but are unsure how to get it to read the date. I have tried to assign a time component to expirationDate and a time period P0DT0H20M to the expirationDuration element.

How to override the expiration time in SOA Workflow OIM?

Hello everyone,
I am working on SOA Workflows to develop the Approval Process in OIM 11g R2 PS1.
I have a requirement as follows:
The request should escalate after 3 days of the request submission to the approver's manager. This configuration i have done in 'Deadlines' , Escalate after and given the duration also.
But this request should not expire after escalation. So, right now its escalating after 3 days but again after 3 days it is getting expired(i.e. on 6th day).
I have to override this expiration with 'Never expire'. How can I achieve that? Any idea?
Regards,
Neha Gupta

Thank you, that was it!
I left the Time-to-Live Override to the default value -1. The new expiration time kicked in after I set it to the right value.
Thanks again.
Hong

How to set up the Time Capsule as an access point

Hi there,
I have home office and am having wifi-connectivity issues due to the layout of my home.
I'm getting the electrician to set up ethernet outlets in various rooms in my house so that I can get wired connections in several rooms. What I want to do is connect my Time Capsule to one of those ethernet ports (see the diagram below) so that I can still broadcast a wi-fi signal in my house while having wired connections elsewhere.
|->
Lan Port 1
Home Office (Laptop)
|
|->
Lan Port 2
Living Room (TV)
Modem
->
Wired Router
|
|->
Lan Port 3
2nd Bedroom (Xbox)
|
|->
Lan Port 4
Dining Room (Time Capsule)
In my research in how to set this up, I've come across documentation that shows how to convert an old Netgear/Linksys wifi router to an access point. Here's an example of the documentation I've run across: http://www.smallnetbuilder.com/wireless/wireless-basics/30338-how-to-convert-a-w ireless-router-into-an-access-point. What I haven't encountered is how to do this with a Time Capsule.
Here are my questions:
Do I just follow these instructions and substitute "Time Capsule" where the author references "AP"?
I currently have my network set up through the Time Capsule. Here are some of the things that I currently have set up and corresponding questions:
all computers can access the printer via wifi - under the above setup, will all computers (connected to the new network via wired OR wireless access) still have access to the printer?
I have my macbook set up as a media center for my xbox and PS3. The Xbox and PS3 connect to my macbook and access the movie files that I have saved on my Time Capsule and a 2nd HDD that is connected to the Time Capsule via USB - under the above setup, will I still be able to access those movies with my PS3 and Xbox via the macbook media center software?
Thanks a ton for any help or advice. It's much appreciated.

Excellent.. great to see people doing the job properly and wiring ethernet.
Here are my questions:
Do I just follow these instructions and substitute "Time Capsule" where the author references "AP"?
Apple system is slightly different.. although the AP method would work the TC has a programmed state for placing it in AP mode.
And Apple even documented it.
http://support.apple.com/kb/HT4260
The difference in your system, is you are not using an Apple primary router (I presume) but otherwise the same.
Any router setup as WAP, you bridge the router part.. and you use Same wireless name.. same security setting (WPA2 Personal is WPA2 AES and the only one suitable). Same passkey..
I would add one difference to the apple insstructions.. they depend on auto wireless channels working. IMHO, auto anything in wireless is akin to voodoo black arts and has more to do with beads and rattles than science. It works fine in some case.. terrible in others.. lock it down. Set the wireless yourself.. at 2.4ghz there are only 3 non overlapping channels.. 1, 6, 11 .. if you use 300mbit N on the main router, it will use 2 of those channels.. choose the third for the TC.
Of course the TC can also use 5ghz.. and I lock it down as well but that is more my control freak nature.. and strong skeptism of anything auto in the wireless world.
I currently have my network set up through the Time Capsule. Here are some of the things that I currently have set up and corresponding questions:
all computers can access the printer via wifi - under the above setup, will all computers (connected to the new network via wired OR wireless access) still have access to the printer?
I have my macbook set up as a media center for my xbox and PS3. The Xbox and PS3 connect to my macbook and access the movie files that I have saved on my Time Capsule and a 2nd HDD that is connected to the Time Capsule via USB - under the above setup, will I still be able to access those movies with my PS3 and Xbox via the macbook media center software?
Your number auto changed.. fun isn't it when i edit it shows correctly but when I post it changes the format.
On the new setup the printer will still be available to all clients .. whether wireless or wired.
And to second part, yes, all file access is not going to change.. well I don't predict any.. IP of the system might change around but overall you are creating a single flat network. And that will work fine.

How to set a specific time zone for time channel in DIADEM

Hi,
I'd like to know how to autmatically set a specific time zone for time channels in DIADEM.
For example, I have stored data with corresponding time channel in UTC time on a disk which was collected in another time zone. Now I want to analyze this data and I want the time channel to show the local time in the time zone where the data was collected, and not the time in the local time zone where the computer is located.
The time channel should also take site local summer/winter time into account. Now I'm running a script that handles it for me which adds or subtract hours according to my input. The problem is that I'm handling data from several different time zones and I'm not located in any of them and when you're running a lot of data over a greater time period, it's easy to make mistakes, especially when it comes to summer/winter time. Is there a any clever solution to this already implemented in Diadem that I have not found?

Hi hj77,
No, I'm sorry, DIAdem has no time zone functionality at all. I'm afraid you have no choice in DIAdem but to keep running your scripts. Summer and Winter time are truly tricky, because the rules for when the changes occur are different in different countries and states within countries and also can change from year to year within the SAME country (as they did in the US a few years ago).
Brad Turpin
DIAdem Product Support Engineer
National Instruments

How to set the Expiration Date for a task which is been assigned explictly.

Hi,
When I assign a task to myself and not work on it for couple of weeks the task is getting released automatically into the original unassigned pool. The TaskActionHandler WSDL is causing that to happen. I don't want a task to be automatically released into the pool when I don't work on it for couple of weeks, how can I make that happen? TaskActionHandler is something which comes with the BPEL so I can't change the way how it behaves. Do I need to set the expiration date or duration explicitly when a task is created?then how do I do that?
If anybody could let me know how to make TaskActionHandler not to release a dehydrated task, I would be glad.
Thanks,
Mythili.

Hi,
Make AUTO RELEASE a restricted action for the task by adding the following line:
<restrictedAction>AUTO RELEASE</restrictedAction>
to the <restrictedActions> tag in the task configuration file.
Works effectively.
Alternatively, you can specifiy the auto release durations on a per task priority basis. There is more on that in the BPEL Dev Guide.
Hth, Sjoerd

Does anyone know how to set the starting time for an audio book?

I am trying to restart a burn in iTunes that failed for an audiobook. I need to set the start time so it will not have to reburn the disks that were already completed. I cannot find out how to do that in version 11 if the book consists of more than one file. Anyone have an idea how to do this? Apple wants me to pay $20 for something that should be in the help menu.

UCCX 5.0(2)SR02 is the version
I attached a screenshot of what I am trying to use but I am not sure what to put as the value? I tried using "now" and "null" but no success.

How to set the expires field to stop caching of pages

I want to set the expires fields of the HTML data on pages delivered by weblogic, so caching servers(ie ISA) and clients dont cache the my pages. How do I do this?
Thanks for any help

I guess that's the NI Domain (NI Security Login) user name. Check out Tools->Security->Login in LV main menu.

How to set the interval time in the   JFormattedTextField? Pls Contribute..

Hi Frienz,
Hi have a following code in which i want set the interval time for the TextField by 15 min
So how it is possible please tell me out.
DateFormatter frmtr = new DateFormatter();
               SimpleDateFormat sdf = new SimpleDateFormat("HH:mm");
               frmtr.setFormat(sdf);
               frmtr.setAllowsInvalid(false);
               DefaultFormatterFactory factory = new DefaultFormatterFactory(frmtr, frmtr, frmtr);
               fmtToTime.setFormatterFactory(factory);

AFAIK there is no easy (pure java) way: either you exec something (depending on your paltform) or use native code. Appropriate privileges will be necessary.

How to set cookie expire time

Similar Messages

Maybe you are looking for