How to set DB driver's encoding ??

I'm currently using Access 2000 with tomcat as server. My problem is how to set the database's encoding in java ?? for both read and write ?? I'm trying to storea strings from the JSP in UTF-8 format in to access but as I retrieve it from database it has a lot of "???" I have the unicode support turned on but still no use, can anyone please help ~ thank you

Hi.
Read documentation on JDBC driver that you use to connect to MS Access database.
Victor Letunovsky

Similar Messages

  • How to set network driver promisc in kernel

    Hello.
    I got a problem. In my project, I need to set network driver promisc so that I can catch all the packets to it. I know how to do it in user application. But I need to do that in kernel space. Do someone know how to do that?
    Thanks in advance.
    wazy

    use DLPI messages,
    types
    #define DL_PROMISCON_REQ 0x1f /* Turn on promiscuous mode */
    #define DL_PROMISCOFF_REQ 0x20 /* Turn off promiscuous mode */
    -Ashutosh

  • How to set hard drive

    how do I set up a hard drive to my Macbook?

    not sure what you mean by how to set up a hard drive?
    installing a new hard drive?
    if you're planning on installing a new drive in your macbook - click HERE for the instructions.
    good luck

  • No sound on HP all in one ms226d how to set up driver ?

    I just bought new pc model ms 226d which come with window7 32 bit version
    but no sound out.  I tried to install driver from realtek and HP support website.
    After finished installation there are no sound out. How can I set up and adjust my PC?

    To be honest I didnt understand what happened exactly. Is headphones jack still in the port and you cannot remove it or what?
    Check please this similar thread.
    I cannot say if the repair would be expensive. If the headphones jack is defective now it must be replaced.
    I recommend you to contact nearest Toshiba service provider, explain the situation and ask for help.

  • How to set up new SSD drives

    I just ordered an SSD drive that looks to be very fast.  It is called Revodrive X2.  I also just got an SSD drive a month ago.  It is a Crucial C300.
    I have read the article on how to set up drives, but my setup is a bit different and I would like to know where to put things based on two of the drives being very fast drives.  I have (or will have shortly) the Revodrive (160GB) as my boot drive.  The C300 (256GB) drive will be for programs and a few frequently used storage-type files.
    I also have 2 WD black 1TB drives.  This gives me a total of 4 drives (2 SSD drives and 2HD's).  What would be the best setup for my drives?
    Asus P6T M/B
    12 GB of memory
    GTX 470
    4 Drives all attached to ICH10 motherboard connections

    JumpCat4 wrote:
    I just ordered an SSD drive that looks to be very fast.  It is called Revodrive X2.
    I also have 2 WD black 1TB drives.  This gives me a total of 4 drives (2 SSD drives and 2HD's).  What would be the best setup for my drives?
    Asus P6T M/B
    12 GB of memory
    GTX 470
    4 Drives all attached to ICH10 motherboard connections
    I guess you do not know that your Revodrive does not connect to a SATA port. It simply plugs into the PCIe bus.  Many times trying to put applications on a different drive than the boot drive can be complicated.

  • How to set up and auto-mirror a networked drive?

    So here's the situation.  I currently have a MBP Retina 15 (max spec'd), and there are some design processes that still run a little slow for my liking.  Given that I spend about half my working life at a desk plugged into a monitor anyway, I figured I'd get a Mac Pro to use when I'm in the office.
    What I need help with is how to:
    -Set up an external networked drive so that I can open and save all my projects to the same place regardless of which machine I'm working on.  I spend 90% of my laptop working time at home on the same network.
    -Have the networked drive auto-back up to another external storage device so that in case of HD failure.  Basically I want to save a file, and have it expeditiously (ideally instantly, but the sooner the better) back up to the secondary HD. 
    Somebody at the Apple Store suggested using a USB HD plugged into Airport Extreme, and that would work, I suppose, but
    1) I'd really prefer something plugged in to the Mac Pro to speed up the data transfer at least one one machine.
    2) There's only 1 USB port on the Airport Extreme.  So if we were to go this way, the back up mechanism would need to be built in to the drive -- some sort of double external HD that auto-mirrors.
    Any suggestions?

    Could you use textarea?
    sym.$('inputfiled').html('<textarea cols="20" rows="3"></textarea>);
    actually the form I used in the file is:
    inputMessage = $('<textarea />').attr({'type':'textarea','rows':'10', 'cols': '25','value':'', 'id':'message'});

  • I am setting up a new iMac and need help syncing files to Dropbox.  On my old computer I had it set where when I saved a document, it was saved on my hard drive, as well as to a folder in Dropbox.  I can't remember how I set this up.  Any help?

    I am setting up a new iMac and need help syncing files to Dropbox.  On my old computer I had it set where when I saved a document, it was saved on my hard drive, as well as to a folder in Dropbox.  I can't remember how I set this up.  Any help?

    The way that Dropbox works is that it keeps a copy of all your files in your local Dropbox folder on your hard drive (which is, by default, directly under your home folder). Adding files to that folder will sync them to the Dropbox server.
    You do of course have to download the Dropbox application to enable this (download link at the top right of http://dropbox.com ).
    Matt

  • How to set up external hard drive and FCE 4

    I am going to buy an external hard drive (firewire 400) and FCE4 but I am not sure how to set everything up.
    Where should I load the software, capture to, and save projects?

    FCE should always live on your system drive. Use the external as your Scratch Disk. You will select this in System Settings in FCE. I create a folder on the external for my projects and point FCE to it.
    Keep your project files on your system drive as well as your autsave vault if you use that. You can put your other files, such as wavefrom caches on the external, though I leave them on my system drive.
    Do not partition the drive. Format as OS Extended

  • How to set multiple home pages, the option is gone (replaced my hard drive and had to reinstall firefox) This version seems to only offer tabs, not pages?

    My old version of Firefox had the option for me to set multiple home pages. My hard drive recently failed and had to be replaced, so I had to install the newest version of Firefox. The only option I see when I go to tools, options, general is to set the one home page. (and maybe tabs) I would like to open several of the same pages every time I open my Firefox. Does anyone know how to get this back, or which version had this feature so I can downgrade to that particular version?
    Also, I was wondering if there is a way to get the bookmarks I had on the old version back. I think they are lost forever, but if anyone knows, I would be thankful. I do still have the old hard drive, but the way it failed was actually when you tried to open any browser, the hard drive would go and blue screen, this is why the old hard drive had to be replaced. Thanks. :)

    So you mean you want to open new windows with the same page when you open Firefox?
    [[How to set the home page#w_set-more-than-one-website-as-your-home-page|Set more than one website as your home page]] should help if you want to open multiple pages when you open Firefox.
    As for recovering your bookmarks, you can try to plug that hard drive into a working computer, and then read [[Recovering important data from an old profile]] to copy your bookmarks from it. However, if it is failing you may not be able to do that.

  • How to set persistent binding for QLA2300 (Sun branded -uses qlc driver)

    How to set persistent binding for QLA2300 (Sun branded ) HBA using qlc driver from Sun?
    Are there any CLI's for it?
    Is it done automatically?
    Is there any way by which we can infer that persistent binding is done?
    Platform: Solaris 9 on SPARC

    Persistent binding is effectively provided by STMS (MPxIO) - is there anything in particular you're wanting to do that STMS doesn't provide?

  • I need information on how Adobe Drive works and how to set it up

    Hey folks,
    believe it or not, but I have been searching a lot on the web already on how to find information how Adobe Drive works and how to set it up.
    Most information that I found is old and seems to be valid only for older versions of Creative suite. Here in the company we use CS5.5 and will switch to CS6 soon.
    I already downloaded Adobe Drive 3 and installed it on my Mac. Unfortunately I don't know what to do next? Do I need Adobe CQ to make it work? Or can I use it with an existing SVN infrastructure, that we have here? Actually I would like to access the SVN via Adobe Bridge. But after the installation of Adobe Drive my Bridge CS5.5 is crashing while starting up, and I didn't find out how to fix this again.
    Actually I just found the manual for Adobe Drive 3 and read it. Seems to be easy in case its working. But it's not in my case, as mentioned above.
    Any idea what could be the problem?

    Thanks,
    in the meantime I managed to re-setup Adobe Drive 3 again. Bridge CS5.1 is still crashing (i have a log-file with a detailed error-report, if somebody knows how to extract information from this.
    At least now I can start Drive as a standalone application.
    So now my main question is how to connect Drive 3 to our subversion infrastructure in the company. Does anybody have information on this?

  • SDIXML_DOM_TO_XML - How to set Encoding - ANSI

    Hi,
    I am using SDIXML_DOM_TO_XML to generate XML File.
    I am using the method 'set_encoding' of IF_IXML_DOCUMENT
    to set the encoding format for the document.
    How to set the encoding format as ANSI for the document?
    Thanks & Regards,
    Abhishek

    also,
    I am trying to write the XML file to file in app.server.

  • How to set a new SCSI number for a second drive?

    How to set a new SCSI number for a second drive?
    Walter

    Walter,
    This web site gives a good diagram:
    http://www.hitachigst.com/hdd/support/dpes/dpesjum.htm
    On a Quantum hard disk drive - they were the original equipment manufacturer (OEM) hard drive provider for Apple, you will see three or four pairs of pins on the green circuit board. They are labled:
    AO . .
    A1 . .
    A2 . .
    If no pins are connected, you have SCSI ID Zero This was the standard setting from the factory.
    If you short out the pins beside AO .__. , you have designated SCSI ID One.
    If you short out the pins beside A1 .__. , you have designated SCSI ID Two.
    If you short out the pins beside A2 .__. , you have designated SCSI ID Four.
    These values can be added together to get other SCSI IDs. If you have a jumper beside AO AND A1, that will add up to SCSI ID Three.
    Some of the quantum drives used tiny black plastic jumpers with tiny metal contacts. I have yet to find a store that sells the tiny ones. I get my larger jumpers from old PC motherboards that are being thrown away. A small piece of aluminum foil will work as a jumper in a pinch. Just make sure it soed not fall off and short something else out!
    Jim
    PS
    CD-ROM drives are set at the factory as ID 3. Internal drives are set at ID 0. I set my external SCSI drive at SCSI 1 so it does not conflict with the internal drive. Internal Zip drives are set at ID 5 and external Zip drives let you choose between 5 and 6. I set my burners at ID 4. Come up with a master plan for your devices like scanners and burners. Apple System Profiler will give you info on the device ID. If the computer fails to boot, turn off all but one SCSI device and make sure of its ID. Then check each subsequent device by powering up only one device at a time while booting from a CD at ID #3.

  • How to set an attached USB drive to automatic sleep using Airdisk?

    Greetings all!
    I am looking for a way to set my two USB drives to sleep when they are not being used. I only use them a few minutes a day, and don't want to run them down or use the electricity to keep them spinning.
    It seems there has been some discussion about this but I haven't been able parse all the conversations. Some people seem to have gotten it to work, while others are relying on a drives "internal" mechanisms. It would be great if someone (perhaps at Apple?) could chime in with an overview of the problem.
    Perhaps it is linked to the method of authentication - ie., (using Airport Utility 5.1), whether the Disks > File Sharing > "Secure Shared Disks" > is with "disk password" or another method?
    Some have suggested a radio button for a future firmware/other update such as:
    "Set drives to sleep when not in use" (Let's hope for this!), but I am hoping for a simple solution in the near future.
    Any thoughts out there?
    best to all.
    *NB: I first posted this on Posted: Apr 4, 2007 12:23 AM and got NO response at all - hopefully I'll have more luck this time !

    Hello Andy,
    Thanks for your reply.
    1. For using Microsoft Outlook rules, we need to keep the computer on, even after work or the colleague is on leave. That is not allowed in my company.
    2. For sending an auto-reply email based on subject, that is impossible because the emails from customers are different and we don't have a basic standard.
    3. Could you please elaborate how to set a transport rule in Exchange server to achieve the goal?
    Thanks a lot in advance.
    Steven
    1. Only client rules require that the Outlook client remain open. An auto-reply rule should be server-side, so no need to leave Outlook open.
    2. Yep!
    3. Walk through the hub transport rules and you see one that replies with a rejection code. Thats the best you can get with a hub transport rule and not something I would recommend in your scenario. You could also search around for 3rd party solutions.
    Twitter!:

  • How to set a platform's default character encoding

    Hi,
    Does anybody know how to set how to set a platform's default character encoding in Java? Thank you.
    Yugang
    [email protected]

    You do 0mean for Java, not from Java? (The latter would make absolutely no sense at all.) If so, pass it to the runtime using the -D switch (you've got SUN's java, right?):
    java -Dfile.encoding=the-encoding-i-like the.name.of.YourClass

Maybe you are looking for