How to set IE8 64 bit to 32 bit

The nature of my question is around the personal PC and laptops of the clients.
I need to know if it is possible to reset the 64bit to 32 bit for "IE8 64 bit pc" - I have found losts of write-ups regarding the Server and Tools but not on individual pc.
Any help will be appreciated.
Edited by: 910359 on 2012/01/26 1:29 AM

I don't think it's a matter of reseting, but they are two different executables.
See more here: http://answers.microsoft.com/en-us/ie/forum/ie8-windows_other/how-to-re-enable-internet-explorer-32-bit-browser/7abe1f28-691c-4673-a2b0-35fb32f2822a

Similar Messages

How to set the 'Configuration Bits' in the PIC16F84

I am using the PIC16F84 in a circuit and I'm programming the assembly for the PIC. However I can't figure out how to set the configuration bits. For example I want to select the LP Oscillator, turn the WDT off, turn the PUT on, and turn the CP off. Normally if I was using the IDE from Microchip I would add the line:
_CONFIG H'3FF0'
However Multsim does not recognize this as a valid code. In addition the P16F84.inc file contains the following definitions:
_CP_ON                       EQU     H'000F'
_CP_OFF                      EQU     H'3FFF'
_PWRTE_ON                 EQU     H'3FF7'
_PWRTE_OFF                   EQU     H'3FFF'
_WDT_ON                      EQU     H'3FFF'
_WDT_OFF                     EQU     H'3FFB'
_LP_OSC                      EQU     H'3FFC'
_XT_OSC                      EQU     H'3FFD'
_HS_OSC                      EQU     H'3FFE'
_RC_OSC                      EQU     H'3FFF'
What is the code though to select which options you want to use?

Try this code:
_CONFIG _CP_OFF & _PWRITE_ON & _WDT_OFF & _LP_OSC
I tried this in the assembler and it didn't return any error messages when compiling. I found this in a PIC Book that I downloaded off the internet.
I hope it works for you. I am new to the MCU Module and learning about it so don't consider me an expert on it by a long shot.
Have A Nice Day
Kittmaster's Component Database
http://ni.kittmaster.com
Have a Nice Day

How to set the option Bit-mapped indexes to true ?

Hi,
I a not a an Oracle Administrator. Usually, I just use Oracle as developper. I have got a Oracle 10g database. I can not import data in my database because the Bit-mapped options is not set.
When I type
select banner from v$version
I get this result :
BANNER
Oracle Database 10g Release 10.2.0.1.0 - Production
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for Linux: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
I run the import and I get this error :
IMP-00017: following statement failed with ORACLE error 439:
"CREATE BITMAP INDEX "ID_ACC_DO" ON "ES_AUDIT_CONNEXION_ARCH" ("DATE_OUVERTU"
"RE" ) PCTFREE 10 INITRANS 2 MAXTRANS 255 STORAGE(INITIAL 33554432 FREELIST"
"S 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT) TABLESPACE "IND_XL" LOGGING"
IMP-00003: ORACLE error 439 encountered
ORA-00439: feature not enabled: Bit-mapped indexes
I typed the command :
SELECT * FROM V$OPTION WHERE PARAMETER LIKE 'Bit-mapped%';
I get the result :
PARAMETER
VALUE
Bit-mapped indexes
FALSE
How to set this parameter to true ?
Best regards,
Xavier

I beleiev that you are on Standard Edition.Bitmap indexes can be used only when you are working with Enterprise edition.
SQL> select * from V$option where parameter like '%Bit%';
PARAMETER
VALUE
Bit-mapped indexes
TRUE
SQL> select * from V$version;
BANNER
Oracle Database 11g *Enterprise Edition* Release 11.1.0.6.0 - Production
PL/SQL Release 11.1.0.6.0 - Production
CORE 11.1.0.6.0 Production
TNS for 32-bit Windows: Version 11.1.0.6.0 - Production
NLSRTL Version 11.1.0.6.0 - Production
SQL>I guess you see the entry coming of Enterprise Edition in my banner.This is missing in your V$version, so you are using Standard Edition install.
You need to move to Enterprise edition to use Bitmap Indexes.
HTH
Aman....
Edited by: Aman.... on Dec 11, 2008 3:09 PM
added a little more.

How to set Java 64-bit as the default?

Hey everyone, I need to use Java 64-bit in Mac OS X Lion and I thought it defaulted to using the 64-bit JDK until I ran Minecraft which stated I was running the 32-bit JDK and if I deselect the 32-bit entry in Java Preferences it deselects the 64-bit entry as well. Does anyone know of a way to make OS X default to the 64-bit version, I also make use of the 64-bit JDK on Windows to ensure my Java applications in NetBeans run correctly on either flavour.
I did try using the OpenJDK 7 and downloaded the 64-bit runtime and installed it correctly and confirmed it was running but when running the Minecraft.app I was greeted with a message saying no compatible JDK 1.5+ was installed and when using the Terminal, it was failing to logon correctly, but was working fine in the standard JDK but like I said, I'm stuck with 32-bit in that case.
Regards, Wobby.

Does minecraft support 64-bit Java?
There isn't really a default java, but you can set the order for your preferred java. Go to the Java Preferences (/Applications/Utilities/Java Preferences) and on the General tab just make sure the 64-bit java is first (you can click and drag them to change the order).
You might also try disabling the 32-bit java by unchecking the "ON" check box next to it and see if Minecraft will run and with which Java (if shouldn't be able to launch the 32-bit one if it is off).
Good luck!

Set value of bit separately

Hi,
I have simple problem i have varchar2 string for example something like this 01000001000011000000000000000000
this string represent 32 bit float number 8.75 in IEEE.
What i need ?
Simple thing and I am not able solve this for long time
I have to create its string binary representation
the result can be in (4 byte) blob ... and how can set the particular bit value.
here is se fragment of code
str='01000001000011000000000000000000';
while i<31 loop
bit:=substr(str,i+1,1);
if (bit='1')then
/* here i need code to set bit to 1 on position i*/
else
/* here i need code to set bit to 1 on position i*/
end if;
i:=i+1;
end loop;
return BL;

I forgot thanks for suggestion ivan

How to set up the interaction between InDesign CS6 8.0 and Photoshop CS 6 - if Photoshop is installed and the 64 and 32-bit?? default InDesign refers to the 64-bit version of Photoshop and scripts do not work.

how to set up the interaction between InDesign CS6 8.0 and Photoshop CS 6 - if Photoshop is installed and the 64 and 32-bit?? default InDesign refers to the 64-bit version of Photoshop and scripts do not work.

Nice of you to point it out here as I at least don’t follow Mr.Nash’s blog regularly.

How to set 32-bit ODBC to crystal report in 64-bit OS

hello,
Previously, I have asked for the CR export question after OS change from WINXP 32 bit to WIN2003 64 bit, and I configurate the 32 bit ODBC administrator at the server and tried to run program to generate simple report, just use CR's own datasource Xtreme Sample Database 11.5. Unfortunately, the program pop up the error message below.
IM002:[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
Error in File C:\DOCUME1\Temp\LOCALS1\Temp\1\CrystalReport1 {20D21A9C-A4AD-4175-81A4-3A25E2D463A0}.rpt:
Unable to connect: incorrect log on parameters.
So I assume, the program will look up for the default ODBC 64 bit for use only. please advise how to set the program to get the 32 bit ODBC to generate report.
Thanks.
Edited by: bigban on Jun 18, 2009 11:32 AM

See [this|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bip/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do] and [this|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bip/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do] note.
[This|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10d5fa88-2013-2c10-c9a5-f11963607d4e] article may also be of use.
Also ensure you have the correct 32 bit database client installed.
And, what version of CR are you using? What version of .NET are you using?
Ludek

How to set a bit and leave it

The company I work for recently took over tech support for a SCADA PC that has Lookout 6.1. Our customer is a small town's Utilities department.
A new pumphouse communicates back to the Public Utilities SCADA PC using radio ethernet. We've found that when setting command bits (Ack alarms, Reset alarms, disable/enable alarms, manual/auto mode change) the radio transmission introduces a delay factor. However, when clicking a pushbutton object to set a bit, Lookout resets the bit almost immediately and long before the remote pumphouse PLC receives the command.
I've looked at and tried the .snapdelay option, set the pushbuttons to latch their outputs, and examined the Lookout.ini settings but have not achieved the desired result. I want to set a bit high with a pushbutton, and leave it high until (optonally) logic in the PLC resets it back to zero. The opposite action would also be desireable, set and stick 0 from a 1 state. In this way, the action would be like a true toggle.
I want Lookout to just get out of the way and not manipulate the output at all: accept the set bit and leave it alone completely. I checked the sample applications, NI website knowledge base and discussion groups, but nothing comes close to explaining how to set and leave a bit in Lookout. Flip-flop objects, one-shot objects and the .snapdelay feature are not suitable to this purpose. Why does Lookout not contain a simple toggle capability?
Can anyone please advise me of a method that will provide what I need?
pb-edm

Thank you for the suggestion.
The radio delay I'm working with is about 2 to 5 seconds, sometimes a little longer.
I was at the customer's site earlier this week and tried several things. Almost nothing worked. I noticed a while ago that a SnapDelay of 0 does NOT disable it on any of the pushbutton objects I created in the app.
I did see in the Lookout Readme Notes file that the unwanted snapback behavior when using remote connections has been a "feature" since version 6.0. The readme contains several possible workarounds, none of which work (as mentioned in my original post).
A set of configurations I found in another application worked for half the objects I newly created, and did not work for the other half -- about 15 objects in total, all pushbuttons. In the pushbutton object properties, I set connections for .enable, .resetvalue and .value to the remote PLC address. When the pushbutton object is clicked, the desired value is forced continuously until a change of state is registered in the PLC. But like I said, it only works about half the time.
Obviously this IS a bug. I'm hoping Lookout pulls up its socks and issues a patch. We don't have ours/our customer's time to waste on something that is accomplished without a second thought in other products.
-pb-edm

How to set iphone 5 bluetooth on windows 7 64 bit in notebook Toshiba

you can tell me how to set iphone 5 bluetooth on windows 7 64 bit in notebook toshiba qosmio f750

Unless you're trying to tether your Internet connection from the phone to the computer, you don't. That is not a feature of the iPhone.

Help!!! How do I get the bit color depth the user has his screen set to?

Help!!! How do I get the bit color depth the user has his screen set to?
Thank you.

i'm not sure if it's what you 're looking for but it worked for me:
GraphicsEnvironment ge = GraphicsEnvironment.getLocalGraphicsEnvironment();
GraphicsDevice[] gs = ge.getScreenDevices();
for(int i=0;i<gs.length;i++){ //length is 1 (= i have only one screen? )
GraphicsDevice g=gs[ i ];
int nBits=g.getDisplayMode().getBitDepth(); //method getDisplayMode() only in jdk1.4 , i think
System.out.println( nBits+"");
output is 32 if i set my screen color to 32bits, 24 if...24, ...

How to set bit rate of audio and video

I want to set the bit rate of audio and video (48,96.128 kbps) at the time of live streaming . i m not using the flash media live encoder because i have to make it as web applicaton. can any one tell me how to set bit rate.

When you're using Flash Player to capture and encode video, your only control is Camera.setQuality():
http://help.adobe.com/en_US/AS3LCR/Flash_10.0/flash/media/Camera.html#setQuality()
Jody

How we set up multiple websites on OSX Server

BACKGROUND
After fiddling and futzing around for weeks (actually since last year) I've finally figured out how to set up multiple websites (virtual sites) using one port and one IP address. While there seems to be lots of discussion on this topic, it seems that the basic assumption is that one knows everything about websites, DNS and all that stuff, which I do not.
When our network was originally established the engineer set up a wiki and also configured webmail, so we had two sites, one secured for mail and the other open for Calendar and the wiki. We were not hosting any websites locally because our school website is hosted by a company in New England.
This year I wanted to set up websites for teachers and students. As great as the wiki is, there are some things it just can't do as well as a website. So I figured if I set up the sites teachers could link back and forth from one to the other. In addition kids could now start to use a real website instead of the cobbled together file mess I had when we ran a Windows network. Also iWeb is a much more accessible tool than FrontPage.
SERVER SIDE:
Snow Leopard Server - 10.6.4
There are two - actually three pieces if you want your iWeb clients to connect to the server: Server Side Web Services, DNS and, in my case, FTP.
================================================ SERVER SIDE - WEB SERVICES
If you haven't turned on Web services, you'll need to open Server Admin and do that. If you don't know how to set up web services - just reply and I'll step you through that as well.
Once web services are set up and turned on, you'll see it listed under your server’s name in the Server Admin sidebar. Click on "Web" and then click on the "Sites" tab at the top of page. This is where you list all your sites.
Click the plus button and enter the fully qualified name of your site, for example: "students.myschool.org". Don't use the defaults here (no name) - that's what got me in trouble before. BE SPECIFIC!
You'll be looking at the "General" tab (the other tabs, "Options", "Realms", etc. we'll deal with in a second).
On the "General Tab", the default IP address ("any") and port (80) is just fine. We'll run everything over port 80. (Apache figures all the virtual site stuff out - you don't need your rocket science degree for that.)
"Web Folder:" is important because this is how you'll "segment" your websites. While I would NEVER do this again, we have a solid state hard drive for the OS and a RAID array for our data files. IF you have that, make sure you do NOT use the default "Web Folder" because it will store all your files on your solid state drive. There may not be enough room, over time, on that drive. I've not experienced it yet, but it's my understanding that if the drive fills up, the server shuts down.
I store my web sites on a folder on the RAID array.
Everything else on that tab can be left as the default. (Just make sure that you have an "index.html" or "index.php" file in your web folder root, but iWeb will take care of that for you.)
I would put in your email address in the "Administrator Email:" field.
Under "Options" you really don't have to put anything. I've tested making websites with iWeb and it doesn't appear that anything needs to be checked.
Nothing needs to be entered in "Realms" as well from what I see working w/ iWeb.
The defaults in "Logging" are fine.
You can leave "Security" alone, but we do have a (self-issued) certificate listed for our webmail site.
"Aliases" is important. Under "Web Server Aliases" you enter how you want the site to respond to when users type in a URL in their web browsers.
When our web server was initially set up the engineer set up "wiki.myschool.org" on port 80 and "mail.myschool.org" on port 443. In the aliases section was nothing but a "*" (the wildcard character). That means, from what I can figure out, that the webserver will respond to these sites regardless of what is typed in the URL. (Well, something like that - point is, if you create OTHER websites, you'll NEVER get to them because the wildcard character in the "Aliases" section, in effect, grabs those web requests and redirects them to the sites that are already there.
In my case I deleted both of those wild card characters. For my "wiki.myschool.org" site, I entered "mail.myschool.org". That means if you type EITHER "wiki." or "mail.", go to the site that’s stored in the “Web Folder” we set up when those sites were created.
For "mail.myschool.org" I just DELETED the wildcard character. I wanted that site (since it was secured) only to respond to "mail." - nothing else. (You're not going to that secured site for any other reason than to get your mail.)
"Proxy" can be left blank. Have no idea what that does. As time permits I'll do some research and figure out what it's used for.
"Web Services" is if you want to provide any MORE services to this particular site. Most likely you'll want to uncheck all the boxes. For our "wiki." site, we have checked "Wikis", "Blogs", and "Calendar". For our "mail." site we have those checked PLUS "Mail".
I would create a separate "Web Folder" for each of your sites. I don't know if that's a requirement but for housekeeping purposes, I would keep the sites separated. And I SUSPECT that it's "best practice" to separate your wiki from your other websites.
SERVER SIDE - DNS
OK...now you have to make your site reachable and the only way to do that is to set up DNS so that folks don't need to type in the IP address of your web server. You need to set up DNS inside your network and, if you want folks in the outside world to reach your website, you'll need to set up an external DNS as well. I'm going to cover INTERNAL DNS - if you don't know how to set up EXTERNAL DNS - reply or email me and I'll post those instructions.
Most likely you have already created Zones for you network...all you really need to do is create "Aliases" so that when you type "students.myschool.org" your web browser will know that site resides on IP address XXX.XXX.XXX.XXX.
If you've set up Zones then you already have a "Machine" setting that translates your server’s name to an IP address and vice versa.
All you need to do is create an "Alias" (CNAME) record for, in this case, "students". You’ll see the choices for types of records when you click the "Add Record" button.
There are only two fields to configure for a record: "Alias Name" - in this case "students" and "Destination" - in this case "servername.myschool.org". (You've already entered a machine record that says "servername" = 192.168.1.x.)
That's it for Internal DNS.
SERVER SIDE - FTP
Now you have to get iWeb to communicate with the webserver.
There are only three ways iWeb will communicate with webservers: MobileMe, Local Folder and FTP Server.
Local Folder is really only practical if you want to host a website on a laptop (I was blown away initially when I found out that all Macs had a built-in web server - how neat is that?). I think there are some very cool things teachers could do with configuration, and, of course, you wouldn't need to set up any web services on the web server, but that's for another discussion. You need to set up FTP services on the web server.
Turn on and enable FTP on your webserver.
You can leave the defaults for "General", "Messages" and "Logging". "Advanced" is the only thing you want to set. I set "Authenticated Users See:" to "Home Folder Only". I set the "FTP Root" to the same root folder in which I plan to store my web sites (/VOLUMES/RAID Array/WebServer/Documents). This setting sets that folder only to be accessible via FTP.
I would suggest returning to your DNS settings and adding one more "Alias". Set "ftp." to point to your webserver. Why? So folks can edit their sites from home (see below).
CAVEAT: If you are running FTP on other servers, make sure that the settings here do not conflict with the settings on the other servers. For example, I'm running FTP on my file server so that my scanners can communicate with it. However, I configure my FTP settings by machine name and NOT "ftp.myschool.org".
================================================
CLIENT SIDE - CONFIGURING iWEB
Now you have to configure iWeb so that it will communicate with your server.
Click on the "Site" icon so that "Site Publishing Settings" appears.
Publishing:
"Publish to:" = "FTP Server"
You can set the "Site name:" and "Contact email:" to whatever you want. But see below!
FTP Server Settings:
"Server address"=ftp.myschool.org (you could also enter in servername.myschool.org or the IP address. However, if you want folks to be able to work on the site from home, you will need to configure external DNS for that. If you use the IP address, you're out of luck for remote access to the site. (You can do it but it's beyond the scope of this discussion.)
"Username" & "Password" should be your user's network login credentials.
"Directory/Path" - this is important. Remember, you set your "FTP Root" to be "/VOLUMES/RAID Array/WebServer/Documents". If you leave this field blank then the website will be dumped into this folder. If you are only setting up one site, that may be OK. However I wanted to set up a "students" site folder, a "faculty" site folder and a separate site for our literary magazine.
THEREFORE: I have, in my ..../Documents folder (on the server), a "students" folder, a "faculty" folder, and a "litmag" folder.
SO...in my "Directory/Path:" field, I have "/faculty". That means the full path to this website is "ftp root/faculty" or "/VOLUMES/RAID Array/WebServer/Documents/faculty" (You don't need a trailing "/" character. iWeb will automatically append the folder for you user depending on what you entered in "Site Name:" in the "Publishing" area.
Website URL:
This is the root website depending on whether it is "students" or "faculty". Since iWeb will append the site name to this root website, I accomplished what I hoped to accomplish in this post (http://discussions.apple.com/message.jspa?messageID=12288561#12288561).
Faculty sites will be @ http://faculty.myschool.org/username. Students @ http://students.myschool.org/username. PERFECT!
iWeb is such a GREAT tool - NOW the kids can start using it!
I want to reiterate that this works for our school but it should work for you as well. There may be better ways to do this but it works for us.
Hope this has been helpful and you won't have to spend weeks trying to figure this all out by yourself!

OK...here's how we did it.
To get access to the website you created from outside your network there are a couple of steps.
First, you have to have a STATIC IP address from your ISP. If you have a T1 circuit, no problem...you usually get a couple of static IPs you can use. However, if you have a cable modem circuit, most likely you have a dynamic IP address which changes when you connect to the internet. Usually a static IP will cost a bit more because the ISP has to go through a couple of steps to set it up for you. But once you have the address, you now have a way for folks outside your network to connect with you.
(I’m also assuming that you use a router of some sort through which traffic flows out to the internet and that you aren’t using connection sharing or something like that.)
The next thing you need to do is have your new static IP address associated with the server on which you are hosting your website. You've probably already done that if your website works inside your network. However, you've associated a private ip (192.168.x.x, etc.) to your web server. That doesn't mean anything to folks on the outside because private IP addresses are just that - private - folks can't access them. (I won't get into VPN because that's a whole other topic.)
The way you associate your new static IP address to your web server is through some sort of dns application from your ISP. For example, we use TierraNet to manage our external DNS information. They have a web interface control panel that is very similar to the DNS interface for XServer. You can create CNAME records (aliases - other ways that folks can access your servers).
Basically you create an "A" (CNAME) record with a fully qualified domain name (e.g. webserver.myschool.org) and point it to your public IP address (XXX.XXX.XXX.XXX) which you just got from your ISP. It's going to take a while (24-48 hours) for this change to take effect. BTW, you can create as many “A” records as you want. For example mail.myschool.com and wiki.myschool.com could point to the same place.
You want to make sure that the fully qualified domain name you enter in the external dns utility matches the name you used when you created your internal dns records on your XServer.
OK...so now folks can get to your domain - but, remember, you have a private network IP scheme between them and you. You now have to tell your router that when web traffic arrives, allow it inside the network and direct it to your web server.
Let's say your public IP address is 205.100.112.50 and your web server is 192.168.0.5.
You have to create, in your router’s "Security Zone" (router companies call them different things) a couple of rules. Usually the first rule is: "Let everything inside the network get out to the web." You've probably already done that if folks inside the network can reach the internet.
You then have to tell the router to allow web traffic (port 80) into your network AND redirect that traffic to 192.168.0.5.
We use AdTran routers and they have a web interface which allows you to write "rules" affecting public and private traffic. Public is folks outside the network, private is folks inside.
AdTran calls them "Security Zones" and you modify those zones with policies.
So my "Policy" would say, in the above example, redirect traffic from my public IP (205.100.112.50) -> to my web server -> (192.168.0.5).
THEN you have to modify this policy with what AdTran calls "Traffic Selectors". You've said, OK, you can get in, but WHAT can get in?
The "Traffic Selector" is written to say: "Permit" "TCP" traffic from 205.100.112.50 only through Port 80. (That's the port that web traffic goes over. If you wanted a secure website, you'd add another traffic selector that opens port 443, for example.)
I'll tell you I'm no genius when it comes to this. I called AdTran and had them configure my router for me. I told them what I wanted done, they remoted into the router and configured it. But then I could go to the web interface and see what they did and then added rules later on when I wanted, for example, to get access to the network via Apple Remote Desktop or VPN into the network on my iPad.
I'd bet that your router has a maintenance agreement that includes this service and if it doesn't it should have.
I did find that I still had issues when I tried to set this up originally and it had to do with the ORDER of the policies. I can’t remember exactly what the issue was, but, effectively one of the policies highjacked traffic before the policy that I wanted got triggered. Simply moving them around in the list fixed that issue. So if you have this set up but still can’t access the site, check the order of your rules.
I don’t know if that helps or not, but I try to think about this stuff conceptually and then get someone to help me with the details. I work with this stuff so infrequently that I forgot how I did something 6 months or a year ago. I’m in the process of creating a wiki for the school which documents all this stuff, but that’s a major undertaking.
Cheers,
John

How to set Compatibility Mode for a single site in ie10

This question was originally posted on the Answers forum -
http://answers.microsoft.com/en-us/ie/forum/ie10-windows_7/how-to-set-compatibility-mode-for-a-single-site-in/187152e3-142a-4d96-8d1b-af82ef571eec
I am having problem with getting ie10 to set ie9 compatibility for a single site (sharepoint.contoso.com).
When I add this website in Compatibility View Settings (Alt > Tools > Compatibility View Settings > 'Add this Website') it adds the domain 'contoso.com' and not the individual website (sharepoint.contoso.com).
This cause other sites (www.contoso.com) to be configured to use compatibility mode. Because this is a separate site (different web server) to the site sharepoint.contoso.com (sharepoint 2010 server) we need different compatibility settings.
Using a different example to explain the issue -
Microsoft has three websites that are different websites created by different developers written in different programming languages and they only work with certain browsers.
microsoft.com (Website1 created by Developer1) - compatible with ie8/ie9/ie10
msdn.microsoft.com (Website2 created by Developer2) - compatible with ie8/ie9
technet.microsoft.com (Website3 website created by Developer3) - compatible only with ie10
The only thing the three website share is the URL contains 'microsoft.com'.
Marking 'msdn.microsoft.com' to run in compatibility mode affects the other 2 websites - mainly technet.microsoft.com which will not work now since it only runs in pure ie10 mode.
Should you be able to add an individual site to the compatibility list instead of all sites that have .microsoft.com in the URL? Am I missing a simple setting in the ie10?
As a workaround I am using the F12 Developer Tools to set the Browser Mode which temporary sets the compatibility mode. However this is not a nice solution to the end users at our organisation.

problem is not solved for non corporate environments...
You could start your own thread. Then if you got that answer and it was marked Answered you would have the ability to unmark it. The OP of this one seems satisfied. Also note that this is TechNet. Consumers can get help on Answers
forums.
Robert Aldwinckle
Oh! I wrote it wrong: I should have said: This is not solved for NON-AD environments. No demands what so ever to use Window 7/8 professional in a small corporation or on a big corporation with Island of smaller departments for example offshore.
The problem is that the thread is not "Answered" by the OP, its is marked answered by a moderator (and same moderator that did the answer) so no way of telling if the OP is satisfied.
But you are right in the fact that I am almost kidnapping the thread. But a complete answer would benefit all in this case I would presume.
Regards
/Aldus

How to install IE8 on Windows Server 2008 R2 Datacenter?

Hello.
Can anybody tell me, how to install IE8 on 2008 R2 Datacenter?
I've downloaded this http://www.microsoft.com/en-us/download/internet-explorer-8-details.aspx for "Windows Server 2008 64-bit and more..", removed IE11, IE10, IE9 from installed updates, and runned "dism /online /disable-feature
/featurename:Internet-Explorer-Optional-amd64".
And nothing helps. I've got a message "Internet Explorer 8 is not supported on this operating system".

you can't "install" IE8 on WS2008R2, nor on Windows7 - because those OS's shipped with IE8.
IE is an OS component, and so when you "upgrade" or "downgrade" IE, you are affecting an OS component.
What this means is that the "IE8" download you are trying to apply, is actually IE8 for WinXP or maybe WinVista.
You can usually "downgrade" Win7 back to IE8, by uninstalling the newer "upgrade" of IE - this causes the OS to automatically attempt to revert to the prior IE version.
This reversion assumes/requires a healthy OS and component store (CBS), including all the pkgmgr file needed to revert to component.
Sometimes, the component store is damaged, or is missing files.
you may need to check the CBS logfiles, and may need to perform SFC /scannow
You may need to use CheckSUR to repair system health.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

How to set up a great Photoshop machine

How to set up a great Photoshop machine
From the blog of John Nack, [former?*] Photoshop Principal Program Manager
At Photoshop World this week, performance testing lead Adam Jerugim
presented a performance guide with hardware recommendations and
information about the CS5 performance preferences. I’ve put his notes
in this post’s extended entry.
http://blogs.adobe.com/jnack/2010/09/how-to-set-up-a-great-photoshop-machine.html#more-271 2
Operating Systems: Mac OS 10.6.4 and Windows 7 64-bit
CPU: Intel Core i7/Xeon or AMD Phenom II/Opteron with 4 cores. More than 4 cores gives diminishing returns.
RAM: Enough to keep Efficiency readout at 100%. If Efficiency is low (<95%), adding RAM will provide biggest benefit. 4GB will cover most digital photography uses. 8GB leaves room for other apps and fits huge documents in RAM.
Video Card: Any modern card with at least 512MB VRAM; 1GB if doing heavy 3D work.
Disk: Use a separate disk for Photoshop scratch. If you spend a lot of time opening / saving large data files, another separate disk for data files will speed that up. Faster disks are better. RAID0 is faster. SSD is faster yet. RAID0 of SSDs is fastest but super expensive. If you have plenty of RAM (meaning your Efficiency readout is 95% or more), separate/faster disks for scratch provide minimal benefit. If Efficiency readout is low, a separate SSD for Photoshop scratch will be a big win. SSD boot volume will speed booting and app launch, but not Photoshop operations.
Memory Usage: this should be no higher than 70% on systems running 32bit Photoshop or with less than 4GB of total physical RAM. On systems with 8GB or more, use 70% if you plan on running other applications at the same time as PS, or higher (up to 90%) if you only plan on using PS on your system.
Efficiency %: can be found in the document window drop-down options. Operations fit in RAM when this 95% or greater.
History & Cache: if you work with small documents with lots of layers, start with the Tall and Thin button (which will set cache levels = 2, tile size = 128K/132K). If you work with large documents with few layers, try the Big and Flat button (which will set cache levels = 6, tile size = 1024K/1028K). Using more history states uses more scratch disk space. More history states may also use more RAM, particularly when running actions or scripts on large documents. If you see Efficiency drop below 95%, especially after running actions, try reducing history states or adding RAM.
Scratch Disks: a separate drive for Photoshop scratch disk will avoid slowdowns from Photoshop and the OS trying to access the disk at the same time. If your Efficiency number often drops below 95%, the gain can be large. Faster disks are better. A RAID0 array is faster, an SSD faster still. If using a RAID or SSD, try setting the Tile Size to 1024K – AMD CPUs prefer 132K / 1028K sizes, but 128K and especially 1024K are more efficient for RAID and SSD use regardless of CPU type.
GPU Settings: you can change GPU settings by clicking on the Advanced Settings button. For more more modern video cards there will be three options: Basic, Normal, Advanced. Changes to this setting will only take effect after PS restart, and would be worth experimenting with if painting performance is sluggish.
Posted by John Nack at 7:10 AM on September 03, 2010
* I understand Mr. Nack may have moved to a different area of Adobe management?
Wo Tai Lao Le
我太老了

Nice of you to point it out here as I at least don’t follow Mr.Nash’s blog regularly.

How to set IE8 64 bit to 32 bit

Similar Messages

Maybe you are looking for