How to set resources message to html:text?
I'using struct in Jdeveloper 10.1.2.3.0 and I would like to set the bean message to the value of html:text, but not success.
<html:text value="<bean:message key="xxx.xxx"/>"/>
How can I do that?
There appears to be some misunderstanding here.
I just tested Mark's instructions and I got what it sounds like you're asking for.
Be sure you are setting the "HTML Form Element Attributes" under "Element". Do NOT set the "HTML Table Cell Attributes" under "Label".
Hope this helps,
Gregory
Edited by: Canis Polaris on Sep 16, 2009 8:02 AM
P.S. I got a nice light blue using CCFFFF.
Similar Messages
-
How to set alert mail contain SQL text activities
How to set alert mail contain SQL text activities.
In "Notification Templates" topic have no Available Tags about sql text. Can I send mail alert with SQL text?it should be text/plain, for a complete list refer
http://www.freeformatter.com/mime-types-list.html
Regards. -
Plsss help me: how to set default values in html:file and html:radio
Hai,
To set default value to text box i use the following code. It works well.
<html:text property="modifyserverdesc" value="<%= serverDesc%>" styleClass="text" size="38"/>But for file i use the code
<html:file styleClass="file" property="modifyserverimgfile" value="<%= serverImage%>" size="40"/>It doesn't display value. What is problem here?
how to set default selection in <html:radio>.No it won't help.
You can't set a value into an <input type="file"> control at all. The user has to put values in themselves.
The reason behind this is security. If the programmer could put any value they liked in there, you could upload any file at all from a users computer without their intervention. eg C:\windows\system32\passwords.txt
Bottom line: you can't put a default value into the input type="file" control.
And a good thing too ;-) -
Hi all, I bought one iphone and 3 ipads, i set up all on one apple ID. Now i have a problem when using messages: when sending message from one device it appears again on screen from the other 3 devices. I need help on how to set up messages on each device separately and to start using messages app on each device independently. Thanks
search google for "iphone remove picture from contact"
-
How to set the message in the status bar...
hai,
how to set the message in the status bar...
let us say "inserted data successfully, or opening page followed by the link clicked on the screen....."
kindly help me outsunil,
do not use advise by Ashutosh with WebDynpro.
Instead of placing message into browser status bar (and browser is not the only WD UI agent), use IWDMessageManager API to post messages of such kind:
wdComponentAPI.getMessageManager().reportSucces("Record inserted");
VS -
How to set MQ message header properties using JMS adapter? (10.1.2)
Hello,
I am trying to send MQ messages from a BPEL process. We are using OAS 10.1.2 and JMS MQ adapter. Could you please let me know how to set the message descriptors like message format, type, report and reply to queue properties and queue open options (in jmsAdapterOutboundHeader).
Regards,
Geratayyaput something like this
<activationAgents>
<activationAgent className="oracle.tip.adapter.fw.agent.jca.JCAActivationAgent" partnerLink="PARNERLINKNAME">
<property name="clusterGroupId">SOMEUNIQUEVALUE</property>
<property name="portType">PARTNERLINK_PORTTYPE</property>
</activationAgent>
</activationAgents> -
How to set default selection in html:radio
hai
how to set default selection in <html:radio>.No it won't help.
You can't set a value into an <input type="file"> control at all. The user has to put values in themselves.
The reason behind this is security. If the programmer could put any value they liked in there, you could upload any file at all from a users computer without their intervention. eg C:\windows\system32\passwords.txt
Bottom line: you can't put a default value into the input type="file" control.
And a good thing too ;-) -
JTextPane, how to set only a part of text editable?
How to set only a part of text in JTextPane editable? For example I want to forbid changing text after 'enter'. JTextPane has method setEditable but this works only for whole JTextPane.
Plz help!!!I'm working on some application similar to unix console. It can't be done relatively simply with the provided components (for example two textfileds), but then it will not look like console :) .
Now some technical problems:
Anyway, use a DocumentListener and have it ignore any changes
in areas you deem to be protected.I have no idea how to ignore changes using DocumentListener. Could you give more information abut this?
I found "my own way". I create MyDefaultStyledDocument which extends DefaultStyledDocument. Then I overwrite two methods: insertString and remove. Using offsets values I manage to block everything before " > ", and I protect output from editing. But I still have a problem:
This works fine (add "> " to JTextPane text):
String s = console.getText();
s = s+"> ";
console.setText(s); but this doesn't work (for example replace last word):
String all = parent.getText();
all = all.substring(0,all.length() - cut);
all = all+text+" ";
parent.setText(all);where: parent = console = JTextPane
Why?
And one more question. Why when I typed "enter", Document remove all text and paste it again :/ -
JTextArea, how to set only a part of text editable?
How to set only a part of text in JTextArea editable? For example I want to forbid changing text beteween lines 2 and 6. JTextArea has method setEditable but this works only for whole JTextArea.
Plz help!!!http://forum.java.sun.com/thread.jspa?forumID=57&threadID=5177361
-
How to set resource connection factory?
How to set resource connection factory if JMS is upported through JNDI?
Hi,
The Simplest Way to Load a Property file (Which is outside of your Application) ..is.
Just Place the Property file in the Server Classpath...or in the "C:\bea103\user_projects\domains\7001_Domain\lib" folder of your Domain. It means somehow the Property file should be available in the Server Classpath...
Now Please write the following code in your Application to read the Property file:
java.util.Properties prop = new java.util.Properties();
java.io.InputStream stream=this.getClass().getClassLoader().getResourceAsStream(“my.properties”);
prop.load(stream);
String hostProperty = p.getProperty(“host.name”);
Thanks
Jay SenSharma
http://jaysensharma.wordpress.com/generalweblogic/ (WebLogic Wonders Are Here) -
How to set error message inside the loop...module pool
Dear all,
Am creating Table Control without wizard. In that i am looping the values, that is, Once if i entered 5 digit values means, 12345-08... the values should be stored in z-table like this 12345,12346,12347,12348 . That is 5-8 it as to update in z table. for this i createdloop at itab and inside that i written a code to count the value and all. and also its clearly updating the value in ztable too. now i want to know, if once again i entered the same value means, like 12345-08.. it as to show error messge.I dont know how to set the condition with error message inside the single loop .... Its all comes under module pool program.
Thanks,
Santhosh.RIf i understood your doubt, here goes the answer.
LOOP AT itab INTO wa_itab. " This is your loop
l_tabix = sy-tabix. "l_tabix receives the line of the loop
READ TABLE itab WITH KEY itab = wa_itab. "itab is the same tab of your loop
IF sy-subrc EQ 0 AND l_tabix NE sy-tabix. "Here the sy tabix have the value of the read table.
* Here you do your error treatment.
ENDIF.
ENDLOOP.
Explanation: When you are looping your internal table, you use a READ TABLE to see the already recorded registers. If the read table finds one register (sy-subrc EQ 0) and the this register is not the one of the current line (l_tabix NE sy-tabix). It means you have a duplicated register.
Maybe there is someway easier to do this, but this is what i thought now.
I hope this was your doubt hehe.
Thales Schmidt -
Hi,
I am working for a client that uses a MQ Series as their interface routing infrastructure. They have written some custom tools that log MQ messages. Their tools expect the MQ message ID to be in a specific format YYYY_MM_DD_HHMMSS_AAAAAA where AAAAAA is a unique set of characters based on the millisecond.
Is it possible to set the JMS message ID on a JMS receiver adapter?
Thanks in advance for your help,
CraigHi Craig,
as it looks you have to set the Message Id in a special format. I am not sure if this is possible at all. I didn't find a way to influence how XI sets the JMS Message Id.
Maybe you could work with the JMS Correlation ID instead and have your client adapt his tools. You can use either a User-Defined Function or a Java Mapping, setting the so-called Adapter-specific attribute DCJMSCorreleationId
Here you can find an example how to do this in the User-Defined Function:
http://help.sap.com/saphelp_nw04/helpdata/en/43/03612cdecc6e76e10000000a422035/frameset.htm
In a Java Mapping it is similar:
http://help.sap.com/saphelp_nw04/helpdata/en/43/09b16006526e72e10000000a422035/frameset.htm
This example uses the File Adapter, but the same applies for the JMS Adapter.
The JMS Adapter has the namespace http://sap.com/xi/XI/System/JMS
Have a look at this one to find out more about the Adapter-specific attributes of the Receiver JMS Adapter:
http://help.sap.com/saphelp_nw04/helpdata/en/10/b1b4c8575a6e47954ad63438d303e4/frameset.htm
I hope that this information is of some help for you.
regards,
Peter -
How to set defalut values for html:radio
Hi all,
can you please tell me how to set defalut values for radio buttons (html:radio) in struts?You may have more luck if you ask this Struts specific question in a forum devoted to Struts at their own homepage over there at apache.org. It may also help a lot to read its documentation and tutorials. I would really be surprised if they didn't even document such a trivial thing.
-
MB21Reservation - How to set Error Message?
Dear Experts,
For a material say 123456, in the material master Purchasingset OB (Obsolete identified Blocked).
1. Then when i do reservation through plant manitenance order, the system issue us the error message(its correct)
2.But when we do MB21-create reservation using 201 movement type, the system allows to create reservation for Material 123456, but it should not allow - it has to issue Error Message
so how to set in SPRO to issue Error message for this scenario and how to stop creating the reservation for OB set Material in MMR.
Its urgent, please help me to solve this
Regards
Saravanan S
Edited by: Subramania Saravanan on Jul 20, 2008 9:10 AM
Edited by: Subramania Saravanan on Jul 20, 2008 9:55 AMHi Friends.
The solution is...go to SPRO-Logistic general-Material Master-setting for keyfields- Define Material Statusthen double click on OB(Obsolete Block Indicator), then you can see for various process..then assign B(error message) for Inventory management.
After settings is done, try to do set OB in purchasing view in MMR for a material, and try to do reservation for the material..system states the Error Message.
Thanks
Saravanan
Edited by: Subramania Saravanan on Jul 20, 2008 1:09 PM -
Set clipboard content using html text
Hi,
I have a html text store in a string variable as mentioned below. I want to set this to the clipboard. But when I set this to clipboard I get the same HTML text and not a readable one.
private
var str:String
= "SALE&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;22&nbsp;&nbsp;&nbsp;CASH040&nbsp;07:26&nbsp;AM";
I tried to create a text area and set clipboard content from that but I am getting an error "TypeError: Error #2007: Parameter text must be non-null."
I tried like
var textArea:TextArea = new TextArea();
textArea.htmlText = str;
System.setClipboard(textArea.text);
Kindly help me in resolving this.
I want to set the readable text to clipboard and not the html text
Thanks,
TamilHi,
I have a html text store in a string variable as mentioned below. I want to set this to the clipboard. But when I set this to clipboard I get the same HTML text and not a readable one.
private
var str:String
= "SALE&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;22&nbsp;&nbsp;&nbsp;CASH040&nbsp;07:26&nbsp;AM";
I tried to create a text area and set clipboard content from that but I am getting an error "TypeError: Error #2007: Parameter text must be non-null."
I tried like
var textArea:TextArea = new TextArea();
textArea.htmlText = str;
System.setClipboard(textArea.text);
Kindly help me in resolving this.
I want to set the readable text to clipboard and not the html text
Thanks,
Tamil
Maybe you are looking for
-
I purchase a new computer and would like to have my iTunes Library that I have on my laptop on this computer as well as my laptop. I have installed iTunes, but I don't know how to copy the music to my new computer.
-
Solaris 10, ipv6 and broken traceroute?
HI, I have a Solaris 10 machine configured with IPv6. When trying to use traceroute on an IPv6 address, I don't see a list of hops, but see the destination host as the first and only hop in the traceroute. Doing a snoop, reveals that the Hop Limit fi
-
Webutil_105.zip problem
Hi, I download the webutil_105.zip and when I try to extract, I got the error message fron winzip said that "Cannot open file: It does not appear to be a valid archive". Please help.
-
Editing Time interval for multiple photos in iPhoto
Is it possible to edit the time of multiple photos in iMovie '08, without editing all of them?
-
T-23 needing to get xp pro re installed
My tennant asked me to fix her father's t-23 that she inherited. Her "geek" nephew, wiped the drive with a botched linux install, so I can't use the convenient (thinkpad) button for restoring windows xp. From what I've learned from reading the Lenov