How to set some line in ALV-OO as selected
Hi,
i use ALV-OO and will set some outputlines before first output as selected.
Example:
i have an output of 10 line. I will set line 2, 6, and 9 with default as selected because some valuy is greater as 1000.
I will set it befaore the first output. Is this possible?
Regards, Dieter
Hi Himanshu,
i have tested it and first it works like i want.
But in second way i think in our case it's better to take editory checkboxes.
Thanks for answer.
Regards, Dieter
Similar Messages
-
How to set some rows in ALV to be editable or some non editable.
Dear all Gurus,
I'm facing a situation here, I need your assistance.
I'm creating a alv table where the user can enter a data and then this will be uploaded into the system. Now upon validation some records might fail and would need some changes and some records that had no problems would have been successfully posted.
When the program returns to the user i want the successful one's to be greyed out and not editable. I'm not sure on how i could acess the rows of the table. I tried few classes and an all i could manage was to change the table setting and configs.
Below i've pasted the code on how i've code my alv table. Please advice on how i could access the rows and disable the successfull ones. Please.
METHOD wddoinit .
DATA: l_ref_cmp_usage TYPE REF TO if_wd_component_usage,
l_interface TYPE REF TO iwci_salv_wd_table,
l_model TYPE ref to cl_salv_wd_config_table, "Contains all characteristics of a table(collumns, fields, etc)
lt_columns TYPE salv_wd_t_column_ref, " Table type
lt_fields TYPE salv_wd_t_field_ref, " Table type
l_btn_ins TYPE REF TO cl_salv_wd_fe_button,
l_btn_del TYPE REF TO cl_salv_wd_fe_button,
l_btn_sell_all TYPE REF TO cl_salv_wd_fe_button,
l_btn_dell_all TYPE REF TO cl_salv_wd_fe_button,
l_btn_calc TYPE REF TO cl_salv_wd_fe_button,
l_btn_save TYPE REF TO cl_salv_wd_fe_button,
l_function TYPE REF TO cl_salv_wd_function,
l_column TYPE REF TO cl_salv_wd_column,
l_header TYPE REF TO cl_salv_wd_column_header,
lr_input_1 TYPE REF TO cl_salv_wd_uie_input_field,
lr_input_2 TYPE REF TO cl_salv_wd_uie_input_field,
lr_input_3 TYPE REF TO cl_salv_wd_uie_input_field,
lr_input_4 TYPE REF TO cl_salv_wd_uie_input_field,
lr_input_5 TYPE REF TO cl_salv_wd_uie_input_field,
lr_input_6 TYPE REF TO cl_salv_wd_uie_input_field,
lr_input_7 TYPE REF TO cl_salv_wd_uie_input_field,
lr_input_8 TYPE REF TO cl_salv_wd_uie_input_field,
lr_input_9 TYPE REF TO cl_salv_wd_uie_input_field,
lr_input_10 TYPE REF TO cl_salv_wd_uie_input_field,
lr_input_11 TYPE REF TO cl_salv_wd_uie_input_field,
lr_input_12 TYPE REF TO cl_salv_wd_uie_input_field,
l_link TYPE REF TO cl_salv_wd_uie_button.
CONSTANTS:
zzto TYPE string VALUE 'ZZTO',
zzfrom TYPE string VALUE 'ZZFROM',
takeoff_date TYPE string VALUE 'TAKEOFF_DATE',
read_date TYPE string VALUE 'READ_DATE',
takeoff_time TYPE string VALUE 'TAKEOFF_TIME',
read_time TYPE string VALUE 'READ_TIME',
ac_hrs TYPE string VALUE 'AC_HRS',
le_hrs TYPE string VALUE 'LE_HRS',
re_hrs TYPE string VALUE 'RE_HRS',
ac_cycle TYPE string VALUE 'AC_CYCLE',
re_cycle TYPE string VALUE 'RE_CYCLE',
le_cycle TYPE string VALUE 'LE_CYCLE',
ltext TYPE string VALUE 'LTEXT'.
l_ref_cmp_usage = wd_this->wd_cpuse_multi_alv( ).
IF l_ref_cmp_usage->has_active_component( ) IS INITIAL.
l_ref_cmp_usage->create_component( ).
ENDIF.
*Map the interface.
l_interface = wd_this->wd_cpifc_multi_alv( ).
DATA:
node_mdoc TYPE REF TO if_wd_context_node,
elem_mdoc TYPE REF TO if_wd_context_element.
navigate from <CONTEXT> to <MDOC> via lead selection
node_mdoc = wd_context->get_child_node( name = if_create_mass_entry=>wdctx_mdoc ).
l_interface->set_data( r_node_data = node_mdoc ).
*Map the model
wd_this->l_model = l_interface->get_model( ).
*Map the columns
lt_columns = wd_this->l_model->if_salv_wd_column_settings~t_columns.
*Map the fields
lt_fields = wd_this->l_model->if_salv_wd_field_settings~t_fields.
cl_salv_wd_model_table_util=>if_salv_wd_table_util_stdfuncs~set_all(
EXPORTING r_model = wd_this->l_model
allowed = abap_false ). " try abap_true
*Enable or Disable the ALV desired outlook and design
wd_this->l_model->if_salv_wd_table_settings~delete_header( ).
wd_this->l_model->if_salv_wd_table_settings~set_selection_mode(
value = cl_wd_table=>e_selection_mode-auto ).
wd_this->l_model->if_salv_wd_table_settings~set_width( value = '100%' ).
wd_this->l_model->if_salv_wd_table_settings~set_visible_row_count( value = '10' ).
wd_this->l_model->if_salv_wd_table_settings~set_read_only( value = abap_false ).
wd_this->l_model->if_salv_wd_std_functions~set_filter_filterline_allowed( value = abap_true ).
wd_this->l_model->if_salv_wd_std_functions~set_sort_headerclick_allowed( value = abap_true ).
wd_this->l_model->if_salv_wd_std_functions~set_export_allowed( value = abap_false ).
*Adding functionalities to the ALV
*'Insert Row' Button
CREATE OBJECT l_btn_ins.
l_btn_ins->set_text( 'Insert Row' ).
l_btn_ins->set_tooltip( 'To enter a new row' ).
l_btn_ins->set_image_source( value = 'ICON_INSERT_ROW' ).
l_function = wd_this->l_model->if_salv_wd_function_settings~create_function( id = 'INSERT' ).
l_function->set_position( value = '1' ).
l_function->set_editor( value = l_btn_ins ).
*'Delete Row' Button
CREATE OBJECT l_btn_del.
l_btn_del->set_text( 'Delete Row' ).
l_btn_del->set_tooltip( 'Delete the selected row' ).
l_btn_del->set_image_source( value = 'ICON_DELETE_ROW' ).
l_function = wd_this->l_model->if_salv_wd_function_settings~create_function( id = 'DELETE' ).
l_function->set_position( value = '2' ).
l_function->set_editor( value = l_btn_del ).
*'Select All' Button
CREATE OBJECT l_btn_sell_all.
l_btn_sell_all->set_text( 'Select All' ).
l_btn_sell_all->set_tooltip( 'Select all entered record' ).
l_btn_sell_all->set_image_source( value = 'ICON_INSERT_ROW' ).
l_function = wd_this->l_model->if_salv_wd_function_settings~create_function( id = 'SELECT' ).
l_function->set_position( value = '3' ).
l_function->set_editor( value = l_btn_sell_all ).
*'Deselect All' Button
CREATE OBJECT l_btn_dell_all.
l_btn_dell_all->set_text( 'Deselect All' ).
l_btn_dell_all->set_tooltip( 'Deselect all records selected' ).
l_btn_dell_all->set_image_source( value = 'ICON_DESELECT_ALL' ).
l_function = wd_this->l_model->if_salv_wd_function_settings~create_function( id = 'DESELECT' ).
l_function->set_position( value = '4' ).
l_function->set_editor( value = l_btn_dell_all ).
*'Calculate' Button
CREATE OBJECT l_btn_calc.
l_btn_calc->set_text( 'Calculate Hours' ).
l_btn_calc->set_tooltip( 'Calculate hours of each record' ).
l_btn_calc->set_image_source( value = 'ICON_CALCULATION' ).
l_function = wd_this->l_model->if_salv_wd_function_settings~create_function( id = 'CALC' ).
l_function->set_position( value = '5' ).
l_function->set_editor( value = l_btn_calc ).
*'Save' Button
CREATE OBJECT l_btn_save.
l_btn_save->set_text( 'Save All' ).
l_btn_save->set_tooltip( 'Save all' ).
l_btn_save->set_image_source( value = 'ICON_SYSTEM_SAVE' ).
l_function = wd_this->l_model->if_salv_wd_function_settings~create_function( id = 'SAVE' ).
l_function->set_position( value = '6' ).
l_function->set_editor( value = l_btn_save ).
FIELD-SYMBOLS: <fs_column> TYPE salv_wd_s_column_ref.
LOOP AT lt_columns ASSIGNING <fs_column>.
l_column = <fs_column>-r_column.
l_column->get_header( RECEIVING value = l_header ).
l_header->set_ddic_binding_field( value = if_salv_wd_c_column_settings=>ddic_bind_none ).
CASE <fs_column>-id .
WHEN zzfrom.
CREATE OBJECT lr_input_1 EXPORTING value_fieldname = zzfrom.
l_header->set_text( value = 'Flt Fr' ).
l_column->set_position( value = '1' ).
l_column->set_cell_editor( lr_input_1 ).
l_column->set_visible( '0' ).
WHEN zzto.
CREATE OBJECT lr_input_2 EXPORTING value_fieldname = zzto.
l_header->set_text( value = 'Flt To' ).
l_column->set_position( value = '2' ).
l_column->set_cell_editor( lr_input_2 ).
WHEN takeoff_date.
CREATE OBJECT lr_input_3 EXPORTING value_fieldname = takeoff_date.
l_header->set_text( value = 'Takeoff Date' ).
l_column->set_position( value = '3' ).
l_column->set_cell_editor( lr_input_3 ).
WHEN read_date.
CREATE OBJECT lr_input_4 EXPORTING value_fieldname = read_date.
l_header->set_text( value = 'Landing Date' ).
l_column->set_position( value = '4' ).
l_column->set_cell_editor( lr_input_4 ).
WHEN takeoff_time.
CREATE OBJECT lr_input_5 EXPORTING value_fieldname = takeoff_time.
l_header->set_text( value = 'Takeoff Time' ).
l_column->set_position( value = '5' ).
l_column->set_cell_editor( lr_input_5 ).
WHEN read_time.
CREATE OBJECT lr_input_6 EXPORTING value_fieldname = read_time.
l_header->set_text( value = 'Landing Time' ).
l_column->set_position( value = '6' ).
l_column->set_cell_editor( lr_input_6 ).
WHEN ac_hrs.
CREATE OBJECT lr_input_7 EXPORTING value_fieldname = ac_hrs.
l_header->set_text( value = 'Flt Time' ).
l_column->set_position( value = '7' ).
l_column->set_cell_editor( lr_input_7 ).
WHEN le_hrs.
CREATE OBJECT lr_input_8 EXPORTING value_fieldname = le_hrs.
l_header->set_text( value = 'LH Eng Runtime' ).
l_column->set_position( value = '8' ).
l_column->set_cell_editor( lr_input_8 ).
WHEN re_hrs.
CREATE OBJECT lr_input_9 EXPORTING value_fieldname = re_hrs.
l_header->set_text( value = 'RH Eng Runtime' ).
l_column->set_position( value = '9' ).
l_column->set_cell_editor( lr_input_9 ).
WHEN ac_cycle.
CREATE OBJECT lr_input_10 EXPORTING value_fieldname = ac_cycle.
l_header->set_text( value = 'No. of Landings' ).
l_column->set_position( value = '10' ).
l_column->set_cell_editor( lr_input_10 ).
WHEN re_cycle.
CREATE OBJECT lr_input_11 EXPORTING value_fieldname = re_cycle.
l_header->set_text( value = 'RH Eng Start' ).
l_column->set_position( value = '11' ).
l_column->set_cell_editor( lr_input_11 ).
WHEN le_cycle.
CREATE OBJECT lr_input_12 EXPORTING value_fieldname = le_cycle.
l_header->set_text( value = 'LH Eng Start' ).
l_column->set_position( value = '12' ).
l_column->set_cell_editor( lr_input_12 ).
WHEN ltext.
CREATE OBJECT l_link.
l_link->set_image_source( value = 'ICON_CREATE_TEXT' ).
l_link->set_text_fieldname( ltext ).
l_link->set_tooltip( value = 'Create Log' ).
l_header->set_text( value = 'Enter Log').
l_column->set_cell_editor( l_link ).
l_column->set_h_align( cl_wd_table_column=>e_h_align-center ).
l_column->set_position( value = '13' ).
WHEN OTHERS.
l_column->set_visible( '01' ).
ENDCASE.
ENDLOOP.
ENDMETHOD.
Your any help is highly appreciated. Thank you.
Regards,
VinodOk, here you go.
In your context, apart from your display fields, add another attribute READ_ONLY, type char01. And lets assume you want the field by name field_1 to be editable or not based on some validation. Your code will be like this to initialize the ALV.
DATA:
l_alv_model TYPE REF TO cl_salv_wd_config_table,
lr_column_settings TYPE REF TO if_salv_wd_column_settings,
lr_column TYPE REF TO cl_salv_wd_column,
lt_col TYPE SALV_WD_T_COLUMN_REF,
ls_col TYPE SALV_WD_S_COLUMN_REF,
lr_input_field type ref to cl_salv_wd_uie_input_field.
l_alv_model = l_ref_interfacecontroller->get_model( ).
l_alv_model->IF_SALV_WD_TABLE_SETTINGS~SET_READ_ONLY( abap_false ).
lr_column_settings ?= l_alv_model.
lt_col = lr_column_settings->get_columns( ).
LOOP AT lt_col INTO ls_col where ID = 'FIELD_1'.
create object lr_input_field exporting value_fieldname = ls_col-id.
lr_input_field->set_read_only_fieldname( 'READ_ONLY' ).
ls_col-r_column->set_cell_editor( lr_input_field ).
ENDLOOP.
In your event handler, you read your node, do a get_static_attributes_table. Perform all validations. Loop through your internal table and set the field READ_ONLY as 'X' when validation succeeds. Do READ_ONLY = space when validation fails. Then do a bind_elements. Now the rows for which read_only is false, will be editable and vice versa.
Hope I was clear enough. Get back if you have any doubts.
Regards,
Nithya -
How to set border lines in table and also in template in the smartforms ?
How to set border lines in table and also in template in the smartforms ?
As I have to create table with following detals
total row = 3
row1 = 3 column
row2 = 6 column
row3 = 9 column
for 2nd and 3rd row data to be fetched using coding.
so can anybody explain me what should i use
Table or Template ?
and I want the border like excel format.
Can anybody suggest me ?
Thanks
nareshif the data is multiple i.e. line items choose table.
if the data is single i.e. fixed choose template.
Create table
> Draw u r no lines
> choose option select pattern
> select display framed patterns
Choose u r required one.
out lined, or full lined. u can choose option.
same procedure to be followed for template also.
with regards,
Kiran.G -
How to set a line of table as read only during runtime?
How to set a line (or a cell) of table as read only during runtime?
hi wei
when you create a table keep the readonly property of table as false
you create the columns of table as inputfield.you bind the readonly property of
the inputfield to two context variables
say one for all the columnfields you to want always have as readonly and let this contextattribute of type boolean and let this be attr1
and another for all the columnfields you donot want to be readonly and let this contextattribute of type boolean and let this be attr2
initially set the context attributes attr1 and attr2 as true so the entire table is readonly.
based on the condition you want to check change the attr2 to be false.
if(your condition)
wdcontext.currentcontextelement.setattr2(false);
hope this helps.
regards
saravana -
How to make some fields in ALV tree editable
Hello All,
Can any one tell me how to make some fields in ALV tree editable.
If possible please post some code.
Regards,
Lisa.Hi Lisa,
I want to make 3 fields in the ALV tree editable and update the saved values in ztable.
I tried making the wa_fieldcat-edit = 'X' But in vain.
Also i made the layout fields wa_layout-edit = 'X' and wa_layout-edit_mode = 'X'.
But still the alv tree field appears as display.
As you have mentioned in the post as answered, So please guide me to make the field editable.
I am using oops method.
Please provide me code if any.
Thanks & Regards,
Mozila -
How to set dash line color(two colors)?
hello all:
Does anyone know how to set dash line color in java?
I only know how to set line color with a single color.
g2.setColor(Color.black);
g2.setStroke(dashed);
g2.draw(new Rectangle2D.Double(50, 50, 200,100));
what I need to implement is two colors interleave on the dash line.
so that dash line looks like this:
==== ====
red white red white
thank you for any comments.
-Daniel.create 2 strokes, space them appropriately, draw the rectangle twice.
-
How to print some data in alv which is not in table.
hi all,
Please can any one tell me how to print some text in the existing alv program to the second line of every record.
the header is there but it is empty.In the data,
there are two lines printing for a normal alv.the same text should be printed in every second line of each record.Please reply soon.its urgent.This is not possible in ALV.
When you say some text I assume the text is not in the same columnar format as the list is.
ALV supports only a columnar format (except for subtotals).
You can add the text to the ITAB by parsing the text to the record. It is not going to look good if you do that. -
How to insert horizontal lines in alv report?
hi,
i have to insert horizontal lines in alv report.( RM07MLBB )
actually my requirement is:
basis list = RM07MLBB.
first secondary list = another report is called here ( RM07DOCS )
i want to insert horizontal lines in the first secondary list, when i execute individually RM07DOCS , i can get horizontal lines, but when i dounle click in the basic list --> in the first secondary list , i am not getting the horizontal lnes.
functional modules used are REUSE_ALV_HIERSEQ_LIST_DISPLAY & REUSE_ALV_GRID_DISPLAY.
here in this program,
is_layout = alv_layout.
hence i tried to give
alv_layout-no_hline = ' '.
but not effecting.
can some one please tell me , how to insert lines in the alv report.
thanks in advance,
Dastagir.hello,
so i cannot insert horizontal lines in the first secondary list according to my sorting condition, i.e., in a single block there should be :
if same delivery challan number is repeating they should come in the same block,
for the corresponding delivery challen number, if have po number, is repeating , they also should come in the same block.
in this way i have to seperate the blocks containing EXNUM , EBELN CONDITIONED. -
How to Set a line's BackGroundColor in JTextPane?
I want to change a whole line's(not only the characters) background color.(display as we set breakpoint in a debug environment).
i tried
DefaultStyleDocument.setCharacterAttributes(start,end-start,MyAttr, false);
This can not set whole line but the begin to the end of the characters in line.
Help,and ThanksThis isn't exactly what you want, but it may give you some idea on how to approach it.
import java.awt.*;
import java.net.*;
import javax.swing.*;
import javax.swing.text.*;
public class BackgroundLines extends JFrame
public BackgroundLines()
throws Exception
JTextArea textComponent = new JTextArea()
public void paintComponent(Graphics g)
Rectangle drawHere = g.getClipBounds();
int lineHeight = g.getFontMetrics().getHeight();
int startOffset = getInsets().top;
int start = (drawHere.y / lineHeight) * lineHeight + startOffset;
int startLineNumber = (drawHere.y / lineHeight);
int endLineNumber = startLineNumber + (drawHere.height / lineHeight) + 1;
for (int i = startLineNumber; i <= endLineNumber; i++)
g.setColor( i % 2 == 0 ? getBackground() : Color.lightGray );
g.fillRect(drawHere.x, start, drawHere.width, lineHeight);
start += lineHeight;
super.paintComponent(g);
textComponent.setOpaque( false );
JScrollPane scrollPane = new JScrollPane(textComponent);
scrollPane.setPreferredSize(new Dimension(300, 250));
getContentPane().add( scrollPane );
public static void main(String[] args)
throws Exception
BackgroundLines frame = new BackgroundLines();
frame.setDefaultCloseOperation( EXIT_ON_CLOSE );
frame.pack();
frame.setVisible(true);
} -
How to set summable field in ALV
Dear ABAPers,
I find report that use ALV to show the output. Using my id the field with number type is summable (using ALV sum functionality) but using other id, it can't. Does anyone know how to set this functionality? I read several posting that this one is achieveable by setting up t_field_cat-do_sum = 'X'. But with this set up, it shouldn't have difference when I run by my id and other. I suppose there is something in ALV setting that need to be configured. Please let me know if there are any idea about this issue.
Thanks a lot.
Regards
HadiHi Karthik,
We don't set user specific layout. I am afraid there is some authorization code set in the program and it determine ALV activities on different user. Are there possibility of it in ALV?
However thanks alot for your suggestion.
Regards
Hadi -
How to create blank line in alv output
Hi all,
Iam getting alv output with currency values like below
text1 20.0 10.0 30.0
text2 25.0 11.0 30.0
text3 27.0 19.0 30.0
text1 24.0 18.0 30.0
text2 27.0 16.0 30.0
text3 29.0 15.0 30.0
text1 23.0 17.0 30.0
text2 22.0 13.0 30.0
text3 21.0 14.0 30.0
and so on...
My requirement is to create blank line after text3. Since its currency field even i claer work area iam able to get 0.0.
If i use no-zero in field catalog i will be able to get blank values for all 0.0, but thats not required.
Can u help me out how to crate blank line after one set of values(text1, text2, text3) in alv display
ThanksHi,
If i use no-zero, then all 0.0 will be replaced by blank, but that is not required.
I want only blank line to be displayed after set of line items.
Skip doesn't help in alv. Secondly if i append blank work area i will be getting 0.0 as it is a currency field. -
How to suppress some lines from printing
Dear all
I have a problem of suppressing some lines in a character mode report depending on some condition. E.g. say I have 5 lines per record to be printed. Say Name, Add1, Add2, Add3, City. Now depending on a condition, I don't want to print Add2, instead Add3 and City should move upward one line resulting only 4 lines in the report. Like wise there may be only two lines in the report, Name and City only.
How to accomplish this task? Thanks in advance.Easy in to do it in the query:
select rtrim(decode(adr1,null,null,adr1||chr(10))||
decode(adr2,null,null,adr2||chr(10))||
decode(city,null,null,city||chr(10))||
country,
chr(10))
from address -
How to read some lines from a text file using java.
hi,
i m new to java and i want to read some lines from a text file based on some string occurrence in the file. This file to be read in steps.
we only want to read the file upto the first Occurrence of "TEXT" string.
How to do it ,,,
Kinldy give the code
Regards,
Sagar
this is the text file
dfgjdjj
sfjhjkd
ghjkdg
hjkdgh TEXT
ikeyt
ujt
jk
tyk TEXT
rukl
rHendawy wrote:
Since the word "TEXT" is formed of 4 letters, you would read the text file 4 bytes by four bytes. Wrong on two counts. First, the file may not be encoded 1 byte per character. It could be utf-16 in which case it would be two byte per character. Second, even if it were 1 byte per character, the string "Text" may not start on a 4 byte boundary.
Consider a FileInputStream object "fis" that points to your text file. use fis.read(byte[] array, int offset, int len) to read every four bytes. Convert the "TEXT" String into a byte array "TEXT".getBytes(), and yous the Arrays class to compare the equality of the read bytes with your "TEXT".getBytes()Wrong since it relies on my second point and will fail when fis.read(byte[] array, int offset, int len) does not read 4 bytes (as is no guaranteed to). Check the Javadoc. Also, the file may not be encoded with the default character encoding.
The problem is easily solved by reading a line at a time using a BufferedReader wrapping an InputStreamReader wrapping a FileInputStream and specifying the correct character encoding.
Edited by: sabre150 on Apr 29, 2009 2:13 PM -
How to set vertical line in SAPScript
Dear All,
I have to set vertical line at a particular position of SAPScript. Here the lines are of varying length. Can you suggest how to do that?
Line 1...................... | Vertical Line
Line 2......................... | Vertical Line
Line 3............... | Vertical Line
Thanks and regards,
AtanuHii
use this
BOX WIDTH 0 FRAME 10
BOX HEIGHT 0 FRAME 10
BOX WIDTH 5 CM HEIGHT 1 CM FRAME 10 TW INTENSITY 10
BOX WIDTH 7 CM HEIGHT 5 CM FRAME 10 TW INTENSITY 10
HOPE THIS HELPS
Thanks & Regards
Naresh -
Field Becomes grayed after some lines in ALV
Hi All,
My question is:
I have prepared a ALV output with some fields editable (means i have handle the style and layout at cell level)
ALV is in the docking container
ALV comes in the 50% of the screen area.
Now, I am trying to change the data by entering some values in the editable cells and then press enter
Good part is:
Upto some certain rows, i am able to change the data in the ALV and no unusual behavior found regarding style and layout
Bad is:
When i am trying to enter the data in editable cell (Say this is row 30) after some lines and press enter then correspoding row cell becomes grayed (Which generally should not be).
if i again repeat the same action for next line (Say this is row 31) then results becomes similar for line 31 as for line 30 but at the same time LINE 30 becomes fine.
Note: Technically, data change method is implemented correctly. No style has been changed during this action.
Thanks in advanceJust a guess..are you entering right type of data into the cell
Best Regards,
rama
Maybe you are looking for
-
[BIOS Update Failure] HP ENVY TouchSmart 15-j021tx stuck at black screen on startup
Hello So I decided to update the BIOS on my laptop because it was on the recommended list of driver updates. It started off smooth at first, but then the screen turned black and just stayed like that for like an hour. Having read from other posts tha
-
Authenticated on ISE 1.2 (as admin) against an external radius server
Hello Our customer wants to be authenticated on ISE 1.2 (as admin) against an external radius server (like ACS not microsoft). How could i do that ? Is it possible while retaining internal admin users database in a sequence "external_radius or intern
-
Upgraded to 7.6 iTunes, no longer opens.
Upgraded to 7.6 itunes. It no longer opens, although iTunes.exe is in the Task Manager. It also made me upgrade my iPod software so now it will no longer let me use any old/previous versions of iTunes. I've tried formatting my computer (emptying it c
-
Problem in creating jar for ejb
hi, I want just to try to compile and deploy my ejb in the new version of bea weblogic server (version 8.1 trial version), but I have the problem when using weblogic.ejbc to create the jar file. There is no such problem when using weblogic 6.x, I can
-
Cross platform issues with InDesign CS5 or earlier
Potential client would like me (designer on a Mac) to design print docs which they can then edit on their PCs. Would love to hear feedback from others about any cross-platform issues/best practices suggestions. Thanks!