How to set stationery in Mail, using AppleScript
Is there a way to automatically use specific stationery with Mail, from an AppleScript script?
To the script below I would like to add an instruction which asigns stationery to the mail message, and so far I have not yet found a working way of doing it.
on run {theSubject, theBody, theAttachment}
tell application "Mail"
set newMessage to make new outgoing message with properties {visible:true, subject:theSubject, content:theBody & return & return}
tell content of newMessage
make new attachment with properties {file name:theAttachment} at after the last paragraph
end tell
activate
end tell
end run
I found an Automator example which requires the installation of an action, but once installed, it does not work. (It must have worked in OSX 10.6, but it does not on Mountain Lion) Here: Automator: Examples
Any ideas, anyone?
Thanks, Oliver
try this:
tell application "Numbers"
tell table 1 of sheet 1 of document 1
repeat with i from 1 to row count
if value of cell 14 of row i is equal to renew_month then
set address_to to value of cells of row i
end if
end repeat
end tell
end tell
Similar Messages
-
How to set up Oracle Alerts using Lotus mail
Hi there
Anyone there knows how to set up Oracle Alerts using Lotus mailHi All. We are looking to install 64-bit Oracle 11g
on 64-bit SUSE Linux Version 10 SP1. We would like to
start up with a 16GB SGA and possibly increase to 50GB. How you calculate you need to start database with 16 GB SGA , and latter need to increase it to 50 GB ?
Can anyone help us with a list of rpms and
kernel settings we would need to get started? ThanksCheck following link for rmp and kernel parameters
http://download.oracle.com/docs/cd/B19306_01/install.102/b15667/pre_install.htm#sthref85
- Virag Sharma
http://virag.sharma.googlepages.com
http://viragsharma.blogspot.com -
How to set up a mail server with a private DNS and relay over a public mail
How to set up the mail server that we can send and pick up emails inside and outside?
Our private network has the DNS name dnsname1.private.
We have our privat DNS Server and he can forward requests to outside over our router.
Our public emails are hosted by an internet provider. This dns name is dnsname2.com and dnsname2.org.
How we have to set up our mail server that we can pick up our emails from our public dnsname2.com?
And when we write an email how we have to set up it that the dnsname is dansname2.com and not dnsname1.private?If you want to move your mailservice to your own (internal) server, start by making sure you can recieve traffic on port TCP 25 (SMTP). Some ISPs blocks this port, especially on "non business" connections.
Can you send mail from your LAN directly to where your mail is hosted using port 25 TCP or do you have to relay via your ISP?
You have a static public IP? -
HT4759 How to set up iCloud Mail on Mac OS X Leopard 10.5.4
I need instructions on How to set up iCloud Mail on Mac OS X Leopard 10.5.4
Welcome to the Apple Community.
Mail preferences > Accounts and set it up using the Mail Server Information.
Some users have apparently encountered issues using this information in pre-Lion set ups (I haven't), Roger Wilmut has kindly provided instructions for those who find themselves with this problem.
Entering iCloud email settings manually in Snow Leopard or Leopard
Entering iCloud email settings manually in Tiger -
How to send HTML Format Mail using Java Mail in oracle 9i Forms
Dear All
could you please tell me how to send HTML Format Mail using Java Mail in oracle 9i Forms and how to implement the java mail ?
if it is possible, could you please send me the sample code? please very urgent
Thanks
P.SivaramanHello,
<p>Here is a Form sample.</p>
Francois -
How to set field type choice using csom (c#)
I have a field type: Choice (menu to choose from) which is not multichoice. How do I set a value?
I have found code for multiple choice but it doesn't seem to work for single choice.Hi,
The following code snippet for your reference:
newListItem["ChoiceFieldName"] = "ChoiceValue";
newListItem.Update();
clientContext.Load(newListItem);
clientContext.ExecuteQuery();
If you are assigning a Value which is not in the Choice Column, You need to create a choice value then assign it to the item.
More information is here:
http://sharepoint.stackexchange.com/questions/124999/how-to-set-field-type-choice-using-csom-c
Best Regards
Dennis Guo
TechNet Community Support -
Is there someplace I can learn how to set up e-mail?
I am not very technical, and have just got the new i-phone 3G, Is there any place where there are step by step easy instructions on how to set up e-mail? Thanks
Depending on your email provider, most of them have instructions how to setup in Apple Mail or Microsoft Outlook. The instructions/settings are the same for the iPhone.
Others, like Gmail and AOL have built-in setup guides in the iPhone.
Who is your email provider? The first step is to visit their web site and look under their support section for the appropriate email settings. -
How to set up e mail account on 5C? be specific on what to place where
How to set up e mail account on 5C? be specific on what to place where
be specific on what to place where
Is that a request or instruction ?
http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
User guide
and
http://www.apple.com/uk/support/iphone/mail/ -
How to set up outgoing mail on iphone 3gs
im new at this can you tell me how to set up outgoing mail from my iphone
im new at this
Then you should probably read the manual: http://support.apple.com/manuals/ -
?? I'm new to using iCloud and couldn't find the answer to: how to set my calendar to use the 24 hour clock. Thanks all.
Thanks, David. i thought i had it set correctly in Preferences in L&R. Being i was wearing my suspenders and belt at the same time i went back to L&R, cleared what was there and re-entered same to include unchecking and rechecking Time Format fgor 24-hour time. It works now. Thanks again.
-
Does anyone know how to set up eircom mail on an iPad 3. Tks Charles
Does anyone know how to set up eircom mail on an ipad 3? Many thanks Charles
- Have you looked at the previous discussions on the right side of the page under the heading "More Like This". The one with the green checkmark is solved.
- Have you Googled for:
setup eircom mail on iphone -
How to set XPoweredByHeaderLevel to NONE using wlst
How to set XPoweredByHeaderLevel to NONE using wlst (by default the value is SHORT).
I mean, I have created a domain using wlst.
Now I want to set XPoweredByHeaderLevel of WebAppContainerMBean to NONE using wlst.
It will be helpful if a sample python(Jython) script is provided.
Please help.Here is a quick Jython example of how to do what you want:
#assuming you already have correct imports for wlst module
#connect to the AdminServer using proper credentials and host information
wlst.connect(username, password, host_info)
#extract domain name
domainName = wlst.domainName
#start an edit session and navigate to the WebAppContainerMBean
wlst.edit()
wlst.cd("/WebAppContainer/" + domainName)
wlst.startEdit()
#set the value of the XPoweredByHeaderLevel attribute to "NONE"
wlst.cmo.setXPoweredByHeaderLevel("NONE")
#activate the change
wlst.activate() -
Set row as header using applescript
I am new to AppleScript and I am writing my first script to crunch some data in numbers. I am trying to figure out how to set row one as the header row in sheet 1 using the script. Can anyone help?
Here is a script a bit more powerful that what you asked for but it's of more general use.
--{code}
--[SCRIPT set_count_of_Xers]
Enregistrer le script en tant que Script : set_count_of_Xers.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Users:<votreCompte>:Library:Scripts:Applications:Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Aller au menu Scripts , choisir Numbers puis choisir “set_count_of_Xers”
En fonction des paramètres passés, le script fixera le nombre de Rangs d’en-tête, Colonnes d’en-tête ou Rangs de bas de tableau dans le tableau table_name de la feuille sheet_name du document doc_name.
--=====
L’aide du Finder explique:
L’Utilitaire AppleScript permet d’activer le Menu des scripts :
Ouvrez l’Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case “Afficher le menu des scripts dans la barre de menus”.
Sous 10.6.x,
aller dans le panneau “Général” du dialogue Préférences de l’Éditeur Applescript
puis cocher la case “Afficher le menu des scripts dans la barre des menus”.
--=====
Save the script as a Script: set_count_of_Xers.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
Go to the Scripts Menu, choose Numbers, then choose “set_count_of_Xers”
According to the defined parameters, the script will set the count of HEADer ROWs, HEADer COLUMNs or FOOTer ROWS in the table table_name of the sheet sheet_name in the document doc_name.
--=====
The Finder’s Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the “Show Script Menu in menu bar” checkbox.
Under 10.6.x,
go to the General panel of AppleScript Editor’s Preferences dialog box
and check the “Show Script menu in menu bar” option.
--=====
Yvan KOENIG (VALLAURIS, France)
2011/09/21
--=====
property forTests : false
true may be useful for tests. It triggers the handler select_SubMenu which list the UI elements.
false is the setting to apply when the script is finished because it runs faster.
--=====
on run
my activateGUIscripting()
This script is a general one allowing to treat the defined table
set doc_name to 1
set sheet_name to "Feuille 2"
set table_name to "Tableau 1"
set which_item to 10
set nb_Xers to 1
my setNbXers(doc_name, sheet_name, table_name, which_item, nb_Xers) (* to set 1 HEADer ROW *)
end run
--=====
which = 10 --> set count of HEADer ROWs
my setNbXers(1, "Feuille 2", "Tableau 1", 10, 1) (* to set 1 HEADer ROW *)
which = 11 --> set count of HEADer COLUMNs
my setNbXers("my doc.numbers", "Sheet 5", "Table aux", 11, 4) (* to set 4 HEADer COLUMNs *)
which = 14 --> set count of FOOTer ROWs
my setNbXers("ASCII.numbers", "Sheet of paper", "TableTop", 14, 3) (* to set 3 FOOTer ROWs *)
on setNbXers(docName, sheetName, tableName, whichItem, nbXers)
my selectTable(docName, sheetName, tableName)
if forTests then
my select_SubMenu("Numbers", 6, whichItem, nbXers + 1)
else
my selectSubMenu("Numbers", 6, whichItem, nbXers + 1)
end if
end setNbXers
--=====
set { dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
on get_SelParams()
local d_name, s_name, t_name, row_num1, col_num1, row_num2, col_num2
tell application "Numbers" to tell document 1
set d_name to its name
set s_name to ""
repeat with i from 1 to the count of sheets
tell sheet i to set maybe to the count of (tables whose selection range is not missing value)
if maybe is not 0 then
set s_name to name of sheet i
exit repeat
end if -- maybe is not 0
end repeat
if s_name is "" then
if my parleAnglais() then
error "No sheet has a selected table embedding at least one selected cell !"
else
error "Aucune feuille ne contient une table ayant au moins une cellule sélectionnée !"
end if
end if
tell sheet s_name to tell (first table where selection range is not missing value)
tell selection range
set {top_left, bottom_right} to {name of first cell, name of last cell}
end tell
set t_name to its name
tell cell top_left to set {row_num1, col_num1} to {address of its row, address of its column}
if top_left is bottom_right then
set {row_num2, col_num2} to {row_num1, col_num1}
else
tell cell bottom_right to set {row_num2, col_num2} to {address of its row, address of its column}
end if
end tell -- sheet…
return {d_name, s_name, t_name, row_num1, col_num1, row_num2, col_num2}
end tell -- Numbers
end get_SelParams
--=====
on parleAnglais()
local z
try
tell application "Numbers" to set z to localized string "Cancel"
on error
set z to "Cancel"
end try
return (z is not "Annuler")
end parleAnglais
--=====
on decoupe(t, d)
local oTIDs, l
set oTIDs to AppleScript's text item delimiters
set AppleScript's text item delimiters to d
set l to text items of t
set AppleScript's text item delimiters to oTIDs
return l
end decoupe
--=====
on activateGUIscripting()
(* to be sure than GUI scripting will be active *)
tell application "System Events"
if not (UI elements enabled) then set (UI elements enabled) to true
end tell
end activateGUIscripting
--=====
==== Uses GUIscripting ====
on selectTable(theDoc, theSheet, theTable)
local maybe, targetSheetRow, rowIndex, r
try
tell application "Numbers"
activate
set theDoc to name of document theDoc (* useful if the passed value is a number. Checks also that we passed the name of an open doc *)
end tell -- Numbers
on error
if my parleAnglais() then
error "The spreadsheet “" & theDoc & "” is not open !"
else
error "Le tableur « " & theDoc & " » n’est pas ouvert ! "
end if -- my parleAnglais
end try
try
tell application "Numbers" to tell document theDoc
set theSheet to name of sheet theSheet (* useful if the passed value is a number and check the availability of theSheet if it’s a string *)
end tell -- Numbers
on error
if my parleAnglais() then
error "The sheet “" & theSheet & "” is unavailable in the spreadsheet “" & theDoc & "” !"
else
error "La feuille « " & theSheet & " » n’existe pas dans le tableur « " & theDoc & " » ! "
end if -- my parleAnglais
end try
try
tell application "Numbers" to tell document theDoc to tell sheet theSheet
set theTable to name of table theTable (* useful if the passed value is a number and check the availability of theSheet if it’s a string *)
end tell -- Numbers
on error
if my parleAnglais() then
error "The table “" & theTable & "” is unavailable in the sheet “" & theSheet & "” of the spreadsheet “" & d & "” !"
else
error "La table « " & theTable & " » n’existe pas dans la feuille « " & theSheet & " » du tableur « " & d & " » ! "
end if -- my parleAnglais
end try
set maybe to 5 > (system attribute "sys2")
tell application "System Events" to tell application process "Numbers"
tell outline 1 of scroll area 1 of splitter group 1 of splitter group 1 of window theDoc
if maybe then (* macOS X 10.4.x
'(value of attributes contains 0)': '(value of attribute "AXDisclosureLevel" is 0)' sometimes works in Tiger, sometimes not.
The only possible instances of 0 amongst the attributes are the disclosure level of a sheet row and the index of the first row, which represents a sheet anyway.
Another possibility is '(value of attribute -1 is 0)', which makes me uneasy. *)
set targetSheetRow to first row where ((value of attributes contains 0) and (value of first static text is theSheet))
else (* macOS X 10.5.x or higher *)
set targetSheetRow to first row where ((value of attribute "AXDisclosureLevel" is 0) and ((groups is {}) and (value of first static text is theSheet)) or (value of first group's first static text is theSheet))
end if -- maybe
tell targetSheetRow to set {value of attribute "AXSelected", value of attribute "AXDisclosing"} to {true, true}
-- Get the sheet row's 0-based index + 2 for the following row's 1-based index.
set r to (value of attribute "AXIndex" of targetSheetRow) + 2
repeat until (value of first static text of row r is theTable)
set r to r + 1
end repeat
set value of attribute "AXSelected" of row r to true
end tell -- outline 1 …
end tell -- System Events
end selectTable
--=====
my selectSubMenu("Pages",6, 4, 26)
==== Uses GUIscripting ====
on selectSubMenu(theApp, mt, mi, ms)
tell application theApp
activate
tell application "System Events" to tell process theApp to tell menu bar 1 to ¬
tell menu bar item mt to tell menu 1 to tell menu item mi to tell menu 1 to click menu item ms
end tell -- application theApp
end selectSubMenu
--=====
useful to get the indexs of the triggered item
my select_SubMenu("Numbers", 6, 10, 1+1) (* Table > Header rows > 1 *)
on select_SubMenu(theApp, mt, mi, ms)
tell application theApp
activate
tell application "System Events" to tell process theApp to tell menu bar 1
get name of menu bar items
01 - "Apple",
02 - "Numbers",
03 - "Fichier",
04 - "Édition",
05 - "Insertion",
06 - "Tableau",
07 - "Format",
08 - "Disposition",
09 - "Présentation",
10 - "Fenêtre",
11 - "Partage",
12 - "Aide"}
get name of menu bar item mt
-- {"Tableau"}
tell menu bar item mt to tell menu 1
get name of menu items
01 - "Insérer un rang d’en-tête au-dessus"
02 - "Insérer un rang d’en-tête en dessous"
03 - missing value
04 - "Insérer une colonne d’en-tête avant"
05 - "Insérer une colonne d’en-tête après"
06 - missing value
07 - "Supprimer le rang"
08 - "Supprimer la colonne"
09 - missing value
10 - "Rangs d’en-tête"
11 - "Colonnes d’en-tête"
12 - "Bloquer les rangs d’en-tête"
13 - "Bloquer les colonnes d’en-tête"
14 - "Rangs de bas de tableau"
15 - missing value
16 - "Ajuster les rangs au contenu"
17 - "Ajuster les colonnes au contenu"
18 - missing value
19 - "Afficher tous les rangs"
20 - "Afficher toutes les colonnes"
21 - "Activer toutes les catégories"
22 - missing value
23 - "Fusionner les cellules"
24 - "Diviser en rangs"
25 - "Diviser en colonnes"
26 - missing value
27 - "Répartir les rangs uniformément"
28 - "Répartir les colonnes uniformément"
29 - missing value -
How to set up outbox mail SMTP etc.
II've lost the ability to sends still have mail in outbox. Need to set up correctly and require method and input etc.
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Using a POP account with multiple devices
http://support.apple.com/kb/ht3228
iOS: Adding an email account
http://support.apple.com/kb/HT4810
iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
http://support.apple.com/kb/ht1694
iPhone, iPad, iPod touch: Microsoft Outlook 2003, Outlook 2007, Outlook 2010 may not display contacts and calendars after sync
http://support.apple.com/kb/TS1944
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say “Cannot Connect to Server”?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
Gmail Account Will Not Connect to Gmail Server
http://support.apple.com/kb/ts3058
How to Delete Email on the iPad
http://ipad.about.com/od/iPad_Guide/ss/How-To-Delete-Email-On-The-Ipad.htm
How to Mass Delete Emails from iPhone and iPad Inbox (with video)
http://suiteminute.com/how-to-mass-delete-emails-from-iphone-and-ipad-inbox/
How to delete ALL mail messages from iPhone/iPad in one step
http://www.conferencesthatwork.com/index.php/technology/2014/01/how-to-delete-al l-mail-messages-from-iphoneipad-in-one-step/
How to add, send and open iPad email attachments
http://www.iskysoft.com/apple-ipad/ipad-email-attachments.html
How to Sync Contacts with Your iPad Using iTunes
http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
Importing a Contact List CSV to the iPad
http://techchannel.radioshack.com/importing-contact-list-csv-ipad-2235.html
iOS: ‘Mailbox Locked’, account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iCloud: Create a group and add contacts to it
http://support.apple.com/kb/PH2667
eMail Groups - You can use a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
How to delete an email account on your iPad
http://www.shoppepro.com/support/knowledgebase/228/How-to-delete-an-email-accoun t-on-your-iPad.html
Cheers, Tom -
How to set up domain mail forwarding
Greeting gurus.
I am a BT Business Broadband custome and BT also host my domain.
I am terminating my Boradband service next week but the domain is not for renewal until 2012.
I have trying to find how to set up mail forwarding for the domain.
I would like all mail addressed to [email protected] -> [email protected]
Replies can then be sent from the appropriate domain.
The reason is that mydomain.com is effectively being mothballed, but I wish to ensure that any mail does not just get lost.
I am on the support line but wanted to know if anyone can help me quicker.
thanks.
ps: this is my first post so be gentle with me!The business forums would be a better place for this.
http://business.forums.bt.com/
I've not hosted a domain with BT, but all the other domain registration/hosting companies I've used have a browser based control panel where these things are configured.
You say the domain is being mothballed. You'll have to continue with the registration though, and BT claim to offer email with all domain registrations, so why not just carry on as you are ?
Maybe you are looking for
-
Why can't I download and install iCloud on windows 7 Laptop?
Downloaded iCloud for PC from apple, started install and got an error message, then program uninstalled all changes it had made. What's my problem?
-
Hello. I have next problem. I have my one account in skype. And recently I noticed my brother has his account but on my mail also. How it can be? Anybody can type somebodies' mail and he(she) will be able to create account? Thank you
-
We have a spec for a drop initial that is 2 line, 35 pt in a secondary font. When we use either a nested style or a character style in the drop cap dialog, or if we simply hilight the 2 line DI and make it 35pt, InD seems to multiply the 35 by whatev
-
Hello, We have an in house enterprise app that can no longer update. We have taken the steps outlined here. These steps include installing a SSL certificate on the server from a trusted CA (GeoTrust) that shows as valid in Safari on OSX. Also the
-
What's the best way of displaying output in other VI ?
For example, in a sub-vi I continuously acquire a motor position, and I want the position value to be displayed simultaneously in a numerical indicator or waveform in the main vi. I know there are lots of ways to implement this easily, but I just wan