How to set "stretch to fill" in AME CS6?
So... We have alot of footage, that is set to DV/PAL Anamorphic... In other words, a squeezed image of ppl in an 720x576 50i (aspect ratio of 1.09).
What I want to do is the following:
- Use Adobe Media Encoder (NOT PREMIER PRO) to...
- Set a "watch folder" to dump the footage into and...
- Export this as 1024x576 25p (aspect ratio: square pixel)...
- And this is supposed to "stretch to fit", thus removing the anamorphic picture...
I have tried setting the settings to this in AME, with no success as I get two black pillars left and right of the footage, with no options to actually stretch the image to fit.
Now, in PremierPro CS6 there is an option in the export that lets me do the "stretch to fit" option... Wich is all good, and works fine on that single file. But this is NOT an option when dealing with the amount of footage we have here. We're talking well over 100 shots with this setting. And going into premier and setting this for each individual sequence is just plain stupid and illogical in itself.
So where is this option in the AME CS6 software itself, or is it simply removed? I know this was there in Adobe Flash Encoder CS3, but has been missing ever since CS4... I was kinda hoping I would find it in CS6, as Adobe usually listens to people, and are a profesional toolkit used by alot of professionals, but I just cant seem to find it...
(source: http://forums.adobe.com/message/2691915)
Any help and/or response of the constructive kind would be nice... But do not tell me to use PremierPro to do this... As this is not an option...
This is all good, and works perfectly fine when dealing with individual clips... However, when we have well over 100 clips... I REALLY would like this option for a "watch folder" that I can then dump these files into, and just let AME work it without me having to actually go in and change it to "stretch to fit" on each and every file.
Is there somewhere I can change the default setting? Or a place in the "create watch folder" dialog box where I can find this option?
Similar Messages
-
how to set up the interaction between InDesign CS6 8.0 and Photoshop CS 6 - if Photoshop is installed and the 64 and 32-bit?? default InDesign refers to the 64-bit version of Photoshop and scripts do not work.
Nice of you to point it out here as I at least don’t follow Mr.Nash’s blog regularly.
-
How to set checkbox to fill max or min value in field
Hi all,
I am pretty new to the adobe acrobat and I just created my first pdf form. I would ask for a help:
In this form I have 2 fields where in one is price with VAT and in other without VAT. I also have a check box and total price field in form.
I would like to set this form in a way that if check box is checked price with VAT is copied in the total price field and if check box is unchecked the price without VAT would be copied in the total price field.
My idea is to set the checkbox to copy max value to total price field if checked and min if unchecked. Is there a way to do that? Is there a better way to achieve that?
Thanks for sour help, I appreciate it!
Luka
(I am not familiar with Java)You can set the min/max to int.MIN_VALUE/int.MAX_VALUE or
Number.MIN_VALUE/Number.MAX_VALUE
It isn't unbounded, but will hopefully meet your needs. -
How to set my Serial Key on PhotoShop CS6?
Hi, i bought PhotoShop CS6 Extended. But i got the trial and now i want to change for life-time. But i can't change. So i'm here to ask:
How can i get PhotoShop CS6 Extended?
So i want to get it and i don't know how. Can u help me?
Thanks in advance, DylanHi Dylan,
When you say that you can't upgrade to the full version of PS CS6, what do you mean? Are you getting any error messages?
Below are some answers pulled from this CS6 trial FAQ page:
Q: How do I convert my trial to a purchased version of the product?
Q: Can I convert my trial to a subscription?
For more information, please refer to the Downloading, Installing, Setting Up forum.
Cheers!
Kendall -
How to set Keyboard shortcuts for Flash Pro CS6?
I have started to use Flash Pro CS6, but my keyboard shortcuts such as F6 to insert a new Keyframe didn't work..I soon found that you could create your own Keyboard Shortcut list within the Flash application, and I am trying to enter F6 for a new Keyframe, but it only lets me enter one letter/number at a time and deletes the other one. I have made sure that F6 isn't in use. It now isn't, any help would be appreciated.
Thanks.if no shortcut works, try resetting your flash pro preferences:
Hold down Shift+Ctrl+Alt (Win) or Shift+Command+Option (Mac) when starting flash pro.
for more info:
http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html -
How can I stretch the homepage so it fills my whole monitor
When I bring your homepage up it does not cover my monitor screen fully. How can I "stretch" it??
Also, your onscreen instructions on how to sort my favorites alphabetically does not seem to work. How can I get them sorted??The first and prefered option is to find a menu somewhere
on the TV that does something to the effect of "fit screen"
or something like that. The TV should then properly align
pixels and fill the screen correctly.
The second option is to get into System Preferences->Monitor
on the Mini and adjust the overscan slider until the image fits
the screen. This however, could lead to misaligned pixels and
some unpleasant effects, primarily with text, if the adjustment
isn't "just right". -
Hi, I am in midst of creating a form in infopath. I have a text box field in which the user will enter the number of issues he has. if the user has entered the number of issues he has, then he will need to select the type of issues from a multi selection
box. Thus i need to know how to set up rules/conditions to ensure that the user has to complete the multi selection box if he enters a value in text box for the number of issues.I assume what you are asking is to make multi selection box as mandatory. If not please explain with a example
Try below:
http://webcache.googleusercontent.com/search?q=cache:ItIYeZ8K2gEJ:sharepointkings.blogspot.com/2013/06/make-multi-select-list-box-required-in.html+&cd=4&hl=en&ct=clnk&gl=in&client=firefox-beta
If this helped you resolve your issue, please mark it Answered -
How we set up multiple websites on OSX Server
BACKGROUND
After fiddling and futzing around for weeks (actually since last year) I've finally figured out how to set up multiple websites (virtual sites) using one port and one IP address. While there seems to be lots of discussion on this topic, it seems that the basic assumption is that one knows everything about websites, DNS and all that stuff, which I do not.
When our network was originally established the engineer set up a wiki and also configured webmail, so we had two sites, one secured for mail and the other open for Calendar and the wiki. We were not hosting any websites locally because our school website is hosted by a company in New England.
This year I wanted to set up websites for teachers and students. As great as the wiki is, there are some things it just can't do as well as a website. So I figured if I set up the sites teachers could link back and forth from one to the other. In addition kids could now start to use a real website instead of the cobbled together file mess I had when we ran a Windows network. Also iWeb is a much more accessible tool than FrontPage.
SERVER SIDE:
Snow Leopard Server - 10.6.4
There are two - actually three pieces if you want your iWeb clients to connect to the server: Server Side Web Services, DNS and, in my case, FTP.
================================================ SERVER SIDE - WEB SERVICES
If you haven't turned on Web services, you'll need to open Server Admin and do that. If you don't know how to set up web services - just reply and I'll step you through that as well.
Once web services are set up and turned on, you'll see it listed under your server’s name in the Server Admin sidebar. Click on "Web" and then click on the "Sites" tab at the top of page. This is where you list all your sites.
Click the plus button and enter the fully qualified name of your site, for example: "students.myschool.org". Don't use the defaults here (no name) - that's what got me in trouble before. BE SPECIFIC!
You'll be looking at the "General" tab (the other tabs, "Options", "Realms", etc. we'll deal with in a second).
On the "General Tab", the default IP address ("any") and port (80) is just fine. We'll run everything over port 80. (Apache figures all the virtual site stuff out - you don't need your rocket science degree for that.)
"Web Folder:" is important because this is how you'll "segment" your websites. While I would NEVER do this again, we have a solid state hard drive for the OS and a RAID array for our data files. IF you have that, make sure you do NOT use the default "Web Folder" because it will store all your files on your solid state drive. There may not be enough room, over time, on that drive. I've not experienced it yet, but it's my understanding that if the drive fills up, the server shuts down.
I store my web sites on a folder on the RAID array.
Everything else on that tab can be left as the default. (Just make sure that you have an "index.html" or "index.php" file in your web folder root, but iWeb will take care of that for you.)
I would put in your email address in the "Administrator Email:" field.
Under "Options" you really don't have to put anything. I've tested making websites with iWeb and it doesn't appear that anything needs to be checked.
Nothing needs to be entered in "Realms" as well from what I see working w/ iWeb.
The defaults in "Logging" are fine.
You can leave "Security" alone, but we do have a (self-issued) certificate listed for our webmail site.
"Aliases" is important. Under "Web Server Aliases" you enter how you want the site to respond to when users type in a URL in their web browsers.
When our web server was initially set up the engineer set up "wiki.myschool.org" on port 80 and "mail.myschool.org" on port 443. In the aliases section was nothing but a "*" (the wildcard character). That means, from what I can figure out, that the webserver will respond to these sites regardless of what is typed in the URL. (Well, something like that - point is, if you create OTHER websites, you'll NEVER get to them because the wildcard character in the "Aliases" section, in effect, grabs those web requests and redirects them to the sites that are already there.
In my case I deleted both of those wild card characters. For my "wiki.myschool.org" site, I entered "mail.myschool.org". That means if you type EITHER "wiki." or "mail.", go to the site that’s stored in the “Web Folder” we set up when those sites were created.
For "mail.myschool.org" I just DELETED the wildcard character. I wanted that site (since it was secured) only to respond to "mail." - nothing else. (You're not going to that secured site for any other reason than to get your mail.)
"Proxy" can be left blank. Have no idea what that does. As time permits I'll do some research and figure out what it's used for.
"Web Services" is if you want to provide any MORE services to this particular site. Most likely you'll want to uncheck all the boxes. For our "wiki." site, we have checked "Wikis", "Blogs", and "Calendar". For our "mail." site we have those checked PLUS "Mail".
I would create a separate "Web Folder" for each of your sites. I don't know if that's a requirement but for housekeeping purposes, I would keep the sites separated. And I SUSPECT that it's "best practice" to separate your wiki from your other websites.
SERVER SIDE - DNS
OK...now you have to make your site reachable and the only way to do that is to set up DNS so that folks don't need to type in the IP address of your web server. You need to set up DNS inside your network and, if you want folks in the outside world to reach your website, you'll need to set up an external DNS as well. I'm going to cover INTERNAL DNS - if you don't know how to set up EXTERNAL DNS - reply or email me and I'll post those instructions.
Most likely you have already created Zones for you network...all you really need to do is create "Aliases" so that when you type "students.myschool.org" your web browser will know that site resides on IP address XXX.XXX.XXX.XXX.
If you've set up Zones then you already have a "Machine" setting that translates your server’s name to an IP address and vice versa.
All you need to do is create an "Alias" (CNAME) record for, in this case, "students". You’ll see the choices for types of records when you click the "Add Record" button.
There are only two fields to configure for a record: "Alias Name" - in this case "students" and "Destination" - in this case "servername.myschool.org". (You've already entered a machine record that says "servername" = 192.168.1.x.)
That's it for Internal DNS.
SERVER SIDE - FTP
Now you have to get iWeb to communicate with the webserver.
There are only three ways iWeb will communicate with webservers: MobileMe, Local Folder and FTP Server.
Local Folder is really only practical if you want to host a website on a laptop (I was blown away initially when I found out that all Macs had a built-in web server - how neat is that?). I think there are some very cool things teachers could do with configuration, and, of course, you wouldn't need to set up any web services on the web server, but that's for another discussion. You need to set up FTP services on the web server.
Turn on and enable FTP on your webserver.
You can leave the defaults for "General", "Messages" and "Logging". "Advanced" is the only thing you want to set. I set "Authenticated Users See:" to "Home Folder Only". I set the "FTP Root" to the same root folder in which I plan to store my web sites (/VOLUMES/RAID Array/WebServer/Documents). This setting sets that folder only to be accessible via FTP.
I would suggest returning to your DNS settings and adding one more "Alias". Set "ftp." to point to your webserver. Why? So folks can edit their sites from home (see below).
CAVEAT: If you are running FTP on other servers, make sure that the settings here do not conflict with the settings on the other servers. For example, I'm running FTP on my file server so that my scanners can communicate with it. However, I configure my FTP settings by machine name and NOT "ftp.myschool.org".
================================================
CLIENT SIDE - CONFIGURING iWEB
Now you have to configure iWeb so that it will communicate with your server.
Click on the "Site" icon so that "Site Publishing Settings" appears.
Publishing:
"Publish to:" = "FTP Server"
You can set the "Site name:" and "Contact email:" to whatever you want. But see below!
FTP Server Settings:
"Server address"=ftp.myschool.org (you could also enter in servername.myschool.org or the IP address. However, if you want folks to be able to work on the site from home, you will need to configure external DNS for that. If you use the IP address, you're out of luck for remote access to the site. (You can do it but it's beyond the scope of this discussion.)
"Username" & "Password" should be your user's network login credentials.
"Directory/Path" - this is important. Remember, you set your "FTP Root" to be "/VOLUMES/RAID Array/WebServer/Documents". If you leave this field blank then the website will be dumped into this folder. If you are only setting up one site, that may be OK. However I wanted to set up a "students" site folder, a "faculty" site folder and a separate site for our literary magazine.
THEREFORE: I have, in my ..../Documents folder (on the server), a "students" folder, a "faculty" folder, and a "litmag" folder.
SO...in my "Directory/Path:" field, I have "/faculty". That means the full path to this website is "ftp root/faculty" or "/VOLUMES/RAID Array/WebServer/Documents/faculty" (You don't need a trailing "/" character. iWeb will automatically append the folder for you user depending on what you entered in "Site Name:" in the "Publishing" area.
Website URL:
This is the root website depending on whether it is "students" or "faculty". Since iWeb will append the site name to this root website, I accomplished what I hoped to accomplish in this post (http://discussions.apple.com/message.jspa?messageID=12288561#12288561).
Faculty sites will be @ http://faculty.myschool.org/username. Students @ http://students.myschool.org/username. PERFECT!
iWeb is such a GREAT tool - NOW the kids can start using it!
I want to reiterate that this works for our school but it should work for you as well. There may be better ways to do this but it works for us.
Hope this has been helpful and you won't have to spend weeks trying to figure this all out by yourself!OK...here's how we did it.
To get access to the website you created from outside your network there are a couple of steps.
First, you have to have a STATIC IP address from your ISP. If you have a T1 circuit, no problem...you usually get a couple of static IPs you can use. However, if you have a cable modem circuit, most likely you have a dynamic IP address which changes when you connect to the internet. Usually a static IP will cost a bit more because the ISP has to go through a couple of steps to set it up for you. But once you have the address, you now have a way for folks outside your network to connect with you.
(I’m also assuming that you use a router of some sort through which traffic flows out to the internet and that you aren’t using connection sharing or something like that.)
The next thing you need to do is have your new static IP address associated with the server on which you are hosting your website. You've probably already done that if your website works inside your network. However, you've associated a private ip (192.168.x.x, etc.) to your web server. That doesn't mean anything to folks on the outside because private IP addresses are just that - private - folks can't access them. (I won't get into VPN because that's a whole other topic.)
The way you associate your new static IP address to your web server is through some sort of dns application from your ISP. For example, we use TierraNet to manage our external DNS information. They have a web interface control panel that is very similar to the DNS interface for XServer. You can create CNAME records (aliases - other ways that folks can access your servers).
Basically you create an "A" (CNAME) record with a fully qualified domain name (e.g. webserver.myschool.org) and point it to your public IP address (XXX.XXX.XXX.XXX) which you just got from your ISP. It's going to take a while (24-48 hours) for this change to take effect. BTW, you can create as many “A” records as you want. For example mail.myschool.com and wiki.myschool.com could point to the same place.
You want to make sure that the fully qualified domain name you enter in the external dns utility matches the name you used when you created your internal dns records on your XServer.
OK...so now folks can get to your domain - but, remember, you have a private network IP scheme between them and you. You now have to tell your router that when web traffic arrives, allow it inside the network and direct it to your web server.
Let's say your public IP address is 205.100.112.50 and your web server is 192.168.0.5.
You have to create, in your router’s "Security Zone" (router companies call them different things) a couple of rules. Usually the first rule is: "Let everything inside the network get out to the web." You've probably already done that if folks inside the network can reach the internet.
You then have to tell the router to allow web traffic (port 80) into your network AND redirect that traffic to 192.168.0.5.
We use AdTran routers and they have a web interface which allows you to write "rules" affecting public and private traffic. Public is folks outside the network, private is folks inside.
AdTran calls them "Security Zones" and you modify those zones with policies.
So my "Policy" would say, in the above example, redirect traffic from my public IP (205.100.112.50) -> to my web server -> (192.168.0.5).
THEN you have to modify this policy with what AdTran calls "Traffic Selectors". You've said, OK, you can get in, but WHAT can get in?
The "Traffic Selector" is written to say: "Permit" "TCP" traffic from 205.100.112.50 only through Port 80. (That's the port that web traffic goes over. If you wanted a secure website, you'd add another traffic selector that opens port 443, for example.)
I'll tell you I'm no genius when it comes to this. I called AdTran and had them configure my router for me. I told them what I wanted done, they remoted into the router and configured it. But then I could go to the web interface and see what they did and then added rules later on when I wanted, for example, to get access to the network via Apple Remote Desktop or VPN into the network on my iPad.
I'd bet that your router has a maintenance agreement that includes this service and if it doesn't it should have.
I did find that I still had issues when I tried to set this up originally and it had to do with the ORDER of the policies. I can’t remember exactly what the issue was, but, effectively one of the policies highjacked traffic before the policy that I wanted got triggered. Simply moving them around in the list fixed that issue. So if you have this set up but still can’t access the site, check the order of your rules.
I don’t know if that helps or not, but I try to think about this stuff conceptually and then get someone to help me with the details. I work with this stuff so infrequently that I forgot how I did something 6 months or a year ago. I’m in the process of creating a wiki for the school which documents all this stuff, but that’s a major undertaking.
Cheers,
John -
How do I stretch an image in Adobe Photoshop CS?
I downloaded a set of picture frames and I want to stretch one to fit
a picture of my dog. How do I stretch it....I don't mean image-
>size, but getting "handles" on the selection
and manipulating it. Thanks in advance.CTRL-A
CTRL-T
Stretch handles
Hit ENTER.
I'm sorry for your loss. -
How to open images in Fill Screen mode from Camera Raw
I am using Photoshop CS4 for Windows. I created an action that executes Fit on Screen and set the Scripts Event Manager to execute that action on the Open Document event. This works when opening a document from Photoshop.
Here are my questions:
1) After opening a raw image from Bridge in Camera Raw, when I then open the image in Photoshop, it does not run the Open Document event action to Fit on Screen. What event do I need to set the action to execute on when opening an image from Camera Raw in Photoshop?
2) I added Fit on Screen to the action by selecting Insert Menu Item from the Actions menu and then selecting View-Fit on Screen. I cannot find Fill Screen on any pull-down menu (the button found on the Hand tool bar). How can I insert the Fill Screen item (which fills the screen a little more than Fit on Screen?
3) In the Scripts Events Manager, when you select Add an Event, it says Any scriptable event can be entered here. See the Scripting Reference for the full list of Photoshop event names.. On the following Adobe webpage, I found the Adobe Photoshop CS4 Scripting Guide but I did not find a list of Photoshop event names in that document. Where can I find the list of Photoshop event names?
http://www.adobe.com/devnet/photoshop/scripting
Thanks to anyone who can help me out.> 3) In the Scripts Events Manager, when you select Add an Event, it says Any scriptable event can be entered here. See the Scripting Reference for the full list of Photoshop event names.. On the following Adobe webpage, I found the Adobe Photoshop CS4 Scripting Guide but I did not find a list of Photoshop event names in that document. Where can I find the list of Photoshop event names?
>
>
>
See "Appendix A: Event ID Codes" in the PSCS4 JavaScript Reference pdf file that
comes with PSCS4.
-X -
Where can I find a video that tells me how to set time on photos to 1 second each?
where can I find a video that tells me how to set time on photos to 1 second each? Where can I find a video that tells me how to add black space to the sides of all photos so that they display completely instead of only showing the center (which shows peoples' crotches but cuts off their heads- great huh?)? Would like to import whole folders of photos, set each to 1 second, have each display completely without distorting to fill. and "play" the timeline as I build it so that I can see if its working before putting in 2000 pics?
Hello Cain,
You can see the Domestic Outbound Scenario (DOT) for how to use incompatibility scenario.
You can find the Customizing guides at SAP Support Poratl.
Regards
Nitesh -
List view - how to set spacing
I am running Mavericks on a MBP and want to set List view so the Name column doesn't stretch out all the way across the window - I want it to default to something only 1.5-2 inches on screen, so I can easily see and order things by the other columns [such as size, date etc.] - I can't figure out how to set up List View to have a default spacing setting = if I add Comments column [which generally is blank anyway] that'll do it but I don't want that, I just want to set up the Name column in list view to be more limited and not stretch all the way across on first opening.
It's dynamic and requires showing more than just the name column. That's Apple's new paradigm.
-
Can't figure out how to set a frame width
Noob questions I suppose....our instructor has us creating a
site using only framesets. I realize this isn't the best way to go,
but we are leading our way up to CSS.
If you look at my navbar, it needs to be 125 to be able to
fit my buttons, but I can not for the life of me how to set the
width of that frame.
Also, how do I name the site on the index file from "untitled
document" to what I want. I know how to do it on individual
pages... or normal index pages, but here, it does not seem I can
pull up the index file alone without everything being loaded and no
way to edit the index file.
Edit: Forgot to provide the link:
http://www.webrevamps.com/assignment10/index2.html
And the pages should not scroll. Hopefully I did that right.
Thanks!Your instructor should be relieved of their duties. Nobody
should be
mentioning frames nowadays except to note that they are
antique and should
only be used on special occasions, and that their use will be
left up to the
reader to determine.
> If you look at my navbar, it needs to be 125 to be able
to fit my navbar,
> but
> I can not for the life of me how to set the width of
that frame.
You set the width of a frame the way you'd expect to - in the
frameset page
definition. When you create a framed site, you first create a
frameset page
that defines the width and height of every frame in the
frameset, e.g.,
<frameset rows="80,*" cols="*" frameborder="no" border="0"
framespacing="0">
<frame src="UntitledFrame-112" name="topFrame"
scrolling="No"
noresize="noresize" id="topFrame" />
<frameset cols="80,*" frameborder="no" border="0"
framespacing="0">
<frame src="UntitledFrame-113" name="leftFrame"
scrolling="No"
noresize="noresize" id="leftFrame" />
<frame src="UntitledFrame-114" name="mm_target"
id="mm_target" />
</frameset>
</frameset>
This defines a frameset containing two rows, one of which is
split into two
columns. The top row is 80px tall, and the bottom row is
whatever is needed
to fill the browser's viewport in height. The bottom row
contains two
columns, the leftmost of which is 80px wide, and the
rightmost is whatever
is needed to fill the browser's viewport.
As mentioned, if your instructor hasn't given you this
information they are
doing a double bad job.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"motleyscrewed" <[email protected]> wrote in
message
news:[email protected]...
> Noob questions I suppose....our instructor has us
creating a site using
> only
> framesets. I realize this isn't the best way to go, but
we are leading our
> way
> up to CSS.
>
> If you look at my navbar, it needs to be 125 to be able
to fit my navbar,
> but
> I can not for the life of me how to set the width of
that frame.
>
> Also, how do I name the site on the index file from
"untitled document" to
> what I want. I know how to do it on individual pages...
or normal index
> pages,
> but here, it does not seem I can pull up the index file
alone without
> everything being loaded and no way to edit the index
file.
>
> Thanks!
> -
How to set white spaces between the fields in dataset??
Hi all,
I am writing a set on information to from infotypes to a text file. Its a fixed width file. How do set white spaces in the fields for dataset?
Example:
TYPES: begin of header,
filler(40) type c,
id(3) type c,
filler2(7) type c,
delimiter type c,
end of header.
DATA header type header.
header-filler1 = ' '.
header-id = '100'.
header-filler2 = ' '.
header-delimiter = cl_abap_char_utilities=>newline. ( do it to get a new line)
my_table = header.
append my_table.
DATA: out_file(256) type C,
codepage_ref type ref to CX_SY_CONVERSION_CODEPAGE,
out_char type c,
size type i,
insert_string type string,
insert_size type i.
out_file = filename.
open dataset out_file for output in text mode ENCODING NON-UNICODE.
LOOP AT my_table.
size = strlen( my_table ).
insert_string = ''.
DO size TIMES.
offset = sy-index - 1.
try.
out_char = my_table+offset(1).
IF out_char = SPACE.
CONCATENATE insert_string '' INTO insert_string SEPARATED BY SPACE.
ELSE.
CONCATENATE insert_string out_char INTO insert_string.
transfer insert_string to out_file NO END OF LINE .
insert_string = ''.
ENDIF.
catch CX_SY_CONVERSION_CODEPAGE.
insert_size = strlen( insert_string ) - 1.
insert_string = insert_string(insert_size).
endtry.
ENDDO.
transfer CL_ABAP_CHAR_UTILITIES=>NEWLINE TO out_file NO END OF LINE.
ENDLOOP.
close dataset out_file.
How do I get to insert the space for filler1 and filler2?
Edited by: Siong Chao on Oct 4, 2011 4:56 AM
Edited by: Siong Chao on Oct 4, 2011 8:27 AM
Edited by: Siong Chao on Oct 4, 2011 8:29 AMproblem lies in the open dataset codes
Used:
open dataset out_file for output in text mode encoding non-unicode message msg.
if sy-subrc= 0.
loop at my_table.
transfer my_table to out_file
transfer cl_abap_char_utilities=>newline to out_file no end of line.
endloop. -
How to set "Identity" of the MDM Payload from iPhone Configuration Utility?
Does anybody know how to set the "Identity" of the Mobile Device Management (MDM) payload of a Configuration Profile from iPhone Configuration Utility (iPCU)? The description says that this is the "Cryptographic credential used for authentication" and I should "Add credentials in the Credentials payload". Any help is appreciated.
The Identity field in the MDM payload section of a configuration profile can only be set AFTER you have set the correct credential in the Credentials section. If you have set the correct credential in the Credentials section, then you will (in my experience) only have one choice for Identity in the MDM payload section. It will be the correct choice fortunately.
To set the correct credential in the Credentials section of the configuration profile, you must have a valid personal certificate in the Windows certificate store. If you have a valid personal certificate in the Windows certificate store it will show up in the (very long) list of certificates you can choose from when you click on Configure in the Credentials section.
You should be prompted for the password for 'exporting your identity'. Fill in both boxes and then click on OK. The set the password again. Yes, the password must be entered three times.
At this point you can go back to the MDM payload section and everything should be OK.
Note that my comments only apply to Windows. My system is Windows 7. However, only version of Windows probably works the same.
Maybe you are looking for
-
ITunes can't find it's buddy...
I just got a new Nano, and want to put songs on it. But apparently, ITunes needs Quicktime to run, but even after I downloaded Quicktime, an error pops up saying ITunes needs Quicktime to run, and for me to make sure it is properly installed. Any ide
-
License for testing and production systems
Hi Experts Can any one help me out on implementing license in my B1 System. According to our contract we have licensed following user types: User Type Licensed AddOn Access License 25 Professional User 5 Software Development Kit - D
-
Cost of goods manufacturing gl assignment in obyc
hi, cost of goods manufacturing gl account with which account modifier combination we need to link obyc transaction code - gbb - which account modifier we need to link with regards, jaya prakash
-
Hi All, Please can you some one let me know how to add colours for sub totala in web report. Thanks, Sudhakar
-
Question Hi - I've transferred my iTunes library from windows 7 pc to one with windows 8. My library was in alphabetical order by surname but after transfer is now some by surname, some by first name, and some not in alphabetical order. How do I sor