How to set the default values of the field of the context.

Hi Experts ,
I want to set the default value of the field of the context.
Where and how this declaration should be done.
Thanks in Advance.

In the context tab of the view. Select the attribute for which you want to set the default value.it will show the properties at the bottom. set the Default value property to the value which you want to set as the default value.
Regards
Naresh

Similar Messages

How to set a default value for particular field in SRM PO Portal

Dear Gurus,
Im desparetly need a help in web dynpro on how to set a default value for a field(flag) in PO header tab in portal.
My requirement is whenever the user press the edit button in PO screen,automatically a flag field should be set as abap_false.
I dont think this will handle in check badi or change badi. i tried this part in onbuttonpressed overwriteexit in CNR_VIEW views,i can get the function EDIT in debugging mode,but dont know how to proceed further.....
Many of them suggested to go with get attribute and set attribute for changing any particular field in web dynpro,but im not very familiar in using those get and set attributes.I request you people can give me sample code on how to identify my target field in the node and set the values while pressing EDIT Button.
Thanks in advance...
Regards,
Sathish

Dear Laurent,
Thanks for your response,
But i searched in enhancement spot of WD_BADI, but couldnt get the exact way to change the coding,
My real requirement is, that particular flag should be enable and disable dynamically by checking a condition in my header values.So in that case i dont know how to proceed further to handle in the PO screen.
Kinly guide me how to get the particular node of field in the Purchase order screen.
Thanks you in advance,
Sorry for the inconvenience if any
Regards,
sathish

How to set a default value in my DropDown using the key ?

Hello All,
Can someone advose how I can achieve the above ? I will like to know how to select a default value for the dropdown by key using the key value instead of description.
The reason why I need to do so instead o fusing description is because my application will populate the dropdown using web services based on the language selection. Hence, if I were to set the default value using description, den other languages will not work anymore.
Any help will be greatly appreciated. Thank you !!
from
KWok Wei

Kwok,
Assuming that:
1. You have a node NodeX, where attribute TargetAttr defined
2. You have a DropDownByKey UI control, its property selectedKey bound to NodeX.TargetAttr attribute
Then:
Place in your code:
wdContext.currentNodeXElement().setTargetAttr("yourKey");
VS
P.S. This topic was raised several times, and forum search works good enough to find an answer

How to set a default value to a field in *_BrowEdit.jsp?

I know that we can use:
<jbo:AttributeIterate id="def" datasource="<%=dsName%>">
<jbo:RenderValue datasource="<%=dsName%>"/> 
</jbo:AttributeIterate>
to accept value .
And now ,I want to set a default value to a filed.
How to do?

Hi,
This functionality is known to be very important and is a key part of the next major release of the JRC planned for the first half of 2008.
Regards,
Blair Wheadon
Product Manager, Crystal Reports

Urgent: How to set a default value to CLOB field?

Hi All,
As per the requirements we have to populate the CLOB field in a template with default value with some template similar to a letter issued to clients in bank.
So, every time when I insert a record in that table this CLOB field should have that letter template populated by default and user will modify that if required from GUI.
How can I populate that CLOB field by default?
Thanks!

Something like this?
ME_XE?
create table test_clob
pk_value number primary key,
one_clob clob   default rpad('something', 32000, '*')
insert into test_clob (pk_value) values (1);
select * from test_clob;
Table created.
Elapsed: 00:00:00.13
ME_XE?ME_XE?
1 row created.
Elapsed: 00:00:00.09
ME_XE?ME_XE?
          PK_VALUE ONE_CLOB
                 1 something***********************************************************************
1 row selected.
Elapsed: 00:00:02.65
ME_XE?ME_XE?
ME_XE?ME_XE?select * from v$version;
BANNER
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product
PL/SQL Release 10.2.0.1.0 - Production
CORE     10.2.0.1.0     Production
TNS for Linux: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
5 rows selected.
Elapsed: 00:00:00.18
ME_XE?

How to set a default value in MARA field 'Old material number'

Hello everyone,
I have a requirement to fill automatically the field MARA-BISMT (Old material number), when creating a new material (using for example MM01). What is the best way to do it?
My idea is to have somewhere a field exit (?) with some ABAP lines to concatenate the material type code with part of the material number, and show the field already filled when in 'Basic data 1' screen.
Does anyone have an idea? Or an example in the system with a similar functionality already implemented?
Thanks
Davide

hi
use the same logic in the excel file and upload through lsmw

HOW TO SET A DEAFULT VALUE FOR A FIELD?

hi friends
i have doubt..how to set a default value for a field..say like in local printer field i always want lp01 to be displayed defaultly..when i click F1 in that field i get the parameter id ..i know there is something dealt with that parameter id..how can i set that default value ..in the case of the default printer value i made in own data settings as lp01 but how to do it normally for other field which has parameter id ??????
thanks and regards
prince

Hi Prince,
u can set the default value in abap as given below
SELECTION-SCREEN: BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN SKIP 1.
PARAMETERS : S_BUKRS TYPE BSID-BUKRS OBLIGATORY DEFAULT '1000'.
PARAMETERS : S_BELNR TYPE BELNR_D OBLIGATORY DEFAULT '1600000070'.
PARAMETERS : S_GJAHR TYPE GJAHR OBLIGATORY DEFAULT '2008'.
PARAMETERS : ASON TYPE BUDAT OBLIGATORY DEFAULT SY-DATUM.
PARAMETERS : S_KUNNR TYPE KUNNR MODIF ID GP1.
PARAMETERS : S_LIFNR TYPE LIFNR MODIF ID GP2.
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN : END OF BLOCK B1.
or
u can give the default value in INITIALIZATION also.
vlue = '1000'.

How to set a Default Value in the drop down on Account Creation ?

Hi,
i have to set a default value in the drop down as soon as a User in a particular business role clicks on New Account. I have written the following code in do_prepare_output method. But this code is executed in the 2nd server round trip after entering some value or pressing enter. so i am not getting as soon as user clicks on the New Account.
How to set that default value when user clicks on New Account ? and where should i code ?
IF lv_icwc_profile = 'ZCSALESPRO' or lv_icwc_profile = 'Z_SALESPRO' .
try.
              lr_entity ?= me->typed_context->header->collection_wrapper->get_current( ).
              lv_current = lr_entity->create_related_entity(
                                              iv_relation_name = 'BuilRolesRel' ).
                             lv_current->set_property(
                                iv_attr_name = 'PARTNERROLE'
                                iv_value     = 'BUP002' ).
               CATCH cx_sy_ref_is_initial cx_sy_move_cast_error
               cx_crm_genil_model_error.
               return.
        ENDTRY.
Thanks and Regards
Raman Khurana

Hi,
I have some idea abt it, it is also used in account life cycle.
Please refer SAP note 1097651, Defaulting a life cycle stage.
Let me know if useful.
rgds,
Vinay

How to set a default value for a drop down list box and then apply cascading based on the default value in Infopath 2010.

Hello Everyone
I have two drop downs. Both are coming from look up fields from two lists. i want to set a default value(first list item) for the first drop down list box and then apply cascading based on the default value for the next drop down list box. I found one article(http://www.bizsupportonline.net/infopath2010/display-first-item-drop-down-list-box-infopath-2010.htm)
where in i can set a default value but i can't apply cascading based on that default value. Any suggestions would be highly appreciated.
Thanks
Ramanjulu Naidu N

Hey Ramanjulu,
Take a look at the below article which I believe will answer your question.
http://basquang.wordpress.com/2010/03/29/cascading-drop-down-list-in-sharepoint-2010-using-infopath-2010/
Daniel Christian (MCTS)

Cannot set the default value of an item in the detailed table

Hi,
I have Master-Detail group, both are Table formats.
I need to set the default value of an item in the details row to the value of an item in the selected row in the Master table.
I tried Default Display Value=#{row.MasterItem}, but it seems it is trying to access current details row instead of the Master.
I tried #{bindings.MasterGroupColumnName.inputValue}, but it does not work.
Any ideas
Thanks in advance
Mohamed

I think I now what I'm doing differently, I had the "New Rows" JHS property of the detailed table group "empty" instead of the default "2" value.
It seems that "Default Display Value" expression works only for the new records specified in the "New Rows" property. But when I try to "Add" new record using the "Add Row" button, the new record inserted does not have the default values generated, only has values populated for the items of the FK (in the view link) but not the ones set through the property.
I guess in a nutshell, how I can get the details item to behave like the FK columns?
Thanks much
Mohamed

How to set a default value in Select one choice.

Hi
I'm using ADF BC, in that how to set a default value in select one choice.
pls. help on this.
regards

set the default value on the underlying EO or VO attribute
john

How to set a default value to t-list when creating t-list programmatically

hi,
I'm creating a t-list programmatically
by calling
n = populate_group('groupname');
populate_list('form.list','groupname');
In this case how to set a default value for the t-list
thanks
rani

I am not sure how it works in Web Dynpro for ABAP, but in Web Dynpro for Java to set default drop down value you will have to set the value for particular attribute (which is linked to the dropdown element) in the context
like
wdContext.currentContext<nodeName>Element.set<FieldName>(<defalut value>)
This generally done in Initialization method of the controller.

How to set a new value for formula field in crystal reports xi?

How to set a new value for formula field in crystal reports xi?//formula{@description} exemplo in VB6crxSubreport.FormulaFields.Item(1).Text = "'Subreport Formula'" orcrxSubreport.FormulaFields.Item("description").Text = "'Subreport Formula'"How to in JRC? 

Hi,
This functionality is known to be very important and is a key part of the next major release of the JRC planned for the first half of 2008.
Regards,
Blair Wheadon
Product Manager, Crystal Reports

How to set a default value in the "Our reference"-field in purchse orders?

Hi!
When creating a purchase order the "Our reference"-field in the Communication-tab is empty. Is it possible to configure this so that the field is filled by default with the name of the person who is creating the PO?

Hi,
There is a button named Personal Settings on ME21N screen. Click on that button --> Click on second tab of Default Values --> Click on More fields --> Select Our reference and maintain the default value. This will always come up at the time of creation of PO.
Hope this serves the purpose.
Thanks...
Edited by: vilas amrutkar on Feb 17, 2009 5:17 AM

How to set a default value in a dropdownlistbox

Hi,
In CRM 2007 WEBUII have created a dropdownlistbox (ddlb) filled with currency codes.
Now I want the default value of the ddlb to be the currency of the country of the loggedin user, ie : 'EUR'
Anyone an creative idea how I can achieve this ?
In first place I need to know how I can set a default value of a ddlb.
--> ddlb type ref to CL_CRM_UIU_DDLB.
regards,
Abjuh

Hello Wolfgang,
If the method does not exist yet, you can create it in your enhanced (Z) context node.
Definition:
ATTRIBUTE_PATH Importing Type STRING
ITERATOR Importing Type Ref To IF_BOL_BO_COL_ITERATOR
VALUE Returning Type STRING
Implementation:
method GET_BP_GROUP.
 DATA: current TYPE REF TO if_bol_bo_property_access.
 DATA: dref TYPE REF TO data.
 if iterator is bound.
 current = iterator->get_current( ).
 else.
 current = collection_wrapper->get_current( ).
 endif.
TRY.
 TRY.
 dref = current->get_property( 'BP_GROUP' ). "#EC NOTEXT
 CATCH cx_crm_cic_parameter_error.
 ENDTRY.
 CATCH cx_sy_ref_is_initial cx_sy_move_cast_error
 cx_crm_genil_model_error.
 RETURN.
ENDTRY.
 IF dref IS NOT BOUND.
 value =''
 RETURN.
 ENDIF.
 TRY.
 value = if_bsp_model_util~convert_to_string( data_ref = dref
 attribute_path = attribute_path ).
 CATCH cx_bsp_conv_illegal_ref.
 FIELD-SYMBOLS: <l_data> type DATA.
 assign dref->* to <l_data>.
* please implement here some BO specific handler coding
* conversion of currency/quantity field failed caused by missing
* unit relation
* Coding sample:
* provide currency, decimals, and reference type
* value = cl_bsp_utility=>make_string(
* value = <l_data>
* reference_value = c_currency
* num_decimals = decimals
* reference_type = reference_type
 CONCATENATE <l_data> '-CURR/QUANT CONV FAILED-' INTO value
 SEPARATED BY space. "#EC NOTEXT
 CATCH cx_root.
 value = '-CONVERSION FAILED-'. "#EC NOTEXT
 ENDTRY.
 if value is initial.
 value = 'Your default value'.
 endif.
endmethod.
Regards,
Fabian

How to set a default value in a DateTime field?

Hi!, how do you set a default value in a DateTime field in a user table to the value of "today"?
Thank you!

It's in SAP Business One 2007, in User-Defined-Fields, under User Tables, Iam trying to add a field to a Table I created in the User-Defined-Tables-Setup menu.
I click Add then type the field name, description and then I select the Type, which is DateTime, then the SelectDefault Value For Field get's grayed out.
Thank you!

How to set the default values of the field of the context.

Similar Messages

Maybe you are looking for