How to set up password complexity in Hyperion IR11 for native users

Hi
We have both domain and native users connecting to Hyperion IR11. The domain users log in as single sign on/domain password. But we also have many Native Users. Now we have a requirment to set password complexity for the native users. Is there any way that we can configure Hyperion for native users password complexity?
Masum Kazi

Check
Time Zone Specification from http://docs.oracle.com/cd/E12844_01/doc/bip.1013/e12187/T421739T481157.htm#4535403
just in case https://blogs.oracle.com/xmlpublisher/entry/how_to_keep_your_dates_from_go

Similar Messages

  • How to set up Windows with Reader and certificate for all users

    Good afternoon (GMT),
    we're dealing with a Win XP (SP3) system that is set up by an Administrator. One task is to set up the system in a way that all users (w/o admin rights) become able to read a certified-protected PDF. Currently we know a way to install the "public key" for this certificate only for one known user. But how to proceed when not all users are known? The users shall later on never be asked to confirm the certification installation/registration.
    If it helps, here is the software version:
    Acrobat 8.12 to encrypt the PDF via certification. In near future I will switch to Acrobat 9.x
    Reader 7.x and/or 8.x on customer PCs.
    Thank you for ideas and hints.
    BTW: Next time we want to provide a solution for Win7 systems, too.
    Carsten

    Check
    Time Zone Specification from http://docs.oracle.com/cd/E12844_01/doc/bip.1013/e12187/T421739T481157.htm#4535403
    just in case https://blogs.oracle.com/xmlpublisher/entry/how_to_keep_your_dates_from_go

  • ATG 10.1.2 . How to set BCC password through CIM?

    I'm new to 10.1.2 version, trying to installing and configure it properly to learn it. With CIM I configured and set Publishing, Production and Staging instances.
    I ran BCC after installation (http://localhost:8180/atg/bcc) and was prompted for password - admin/admin or merchandising/merchandising set by default in previous ATG versions didn't work in 10.1.
    I learned from ATGInstallGuide that there is no default passwords preset in 10.1.2 and I have to set them though CIM. (Or ACC)
    Here what is says:
    *"Through CIM. During the post-installation setup process, CIM prompts you to set the passwords for the*
    *default profiles that your environment requires "*
    I do remember I was once asked one for password for merchandising user only, and the password I set didn't allow me into BCC, so probably it was for something else.
    Please, advise how to set BCC passwords for default account (admin, merchandising and etc) in CIM? I don't see this option in CIM - I everything in CIM and didn't find it
    Just in case there is the list of options CIM provides me after running:
    [1] Database Configuration - Done
    [2] Server Instance Configuration - Done
    [3] Application Assembly & Deployment - Done
    [P] Product Selection - Done (Oracle ATG Commerce Reference Store &
    ATG-Endeca Integration & ATG Site Administration)
    [A] Select Application Server - Done (JBoss)
    *[C] Custom CIM Plugin Launcher
    I'm still not able to open BCC application
    Edited by: 994398 on Mar 17, 2013 5:36 PM
    Edited by: 994398 on Mar 17, 2013 5:37 PM

    CIM will ask for new passwords when you select Create Schema and Import data. If you have forgotten the pwd given by you, you can reset it.
    Check the below threads regarding similar issue.
    ATG 10.1.1 BCC -Default password for admin
    not able to login into ATG Dyn admin
    Cheers
    R

  • How to set min-password length on ASR1002?

    How to set min-password length on ASR1002?

    Try:
    security passwords min-length
    I'm not positive if it's supported in your version of IOS-XE but it is in some.

  • How to set the password encrytacion a database. Accdb from Visual Basic 2010 for a report. Rpl

    I want to know how to set the password encrytacion a database. Accdb from Visual Basic 2010 for a report. Rpl

    You have to connect via ODBC, then use code along the lines of what is described here:
    http://scn.sap.com/thread/3526924
    by me on March 28 and Jan on March 29.
    Also see KBA: 1686419 - SAP Crystal Reports designer does not recognize Access *.accdb file
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
    Follow us on Twitter

  • How to set a password on my airpot express?

    I am using for more than 5 years and i still don't know how to set tha password on it. any one can help?

    Assuming you mean the name and password of the Express itself, connected to the Express, open AirPort Utility on your computer, Select the Express from the list on the left side of the window, choose manual setup, the default password is public you can now rename the Express and change its password, and when finished Update.
    Edit: let me correct what I said above, use the assist mode for this work, it is very easy that way.

  • How to enable root on mac on 10.9.2 and how to set the password for the same ?

    how to enable root on mac on 10.9.2 and how to set the password for the same ?

    http://support.apple.com/kb/ht1528
    Follow the steps for Lion.
    But, why are you doing this? I've never found the need to do that.

  • How to set a password's user in active directorywith jndi?

    hi,
    please, i want to see how to set the password of a user, and i want to ask about ssl if i must use it if want to change the password, please can you give a code example.
    thank you.

    Hi,
    Check the second post at
    http://forum.java.sun.com/thread.jsp?forum=51&thread=229192&start=15&range=15&hilite=false&q=
    -Amol

  • HT2589 How to set a password before buying an app

    How to set a password before buying an app

    The Apple Support Communities are an international user to user technical support forum. As a man from Mexico my first language is Spanish. I do not speak English, however I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
    Try to buy an app and you will be presented with a screen to create an iTunes/Mac App Store account if you have never created one. If you have an iTunes account, sign into the Mac App Store with the same username and password.

  • HOW TO SET RESCETRSION PASSWORD FORGET

    hOW TO SET RESCETRSION PASSWORD FORGET

    Try:
    security passwords min-length
    I'm not positive if it's supported in your version of IOS-XE but it is in some.

  • How to set up a basic file sharing server for my small architectural business?

    I have no idea if I have posted in the correct area as this is my first forum post within the apple support community!
    I have been using a 21.5" imac running 10.6.8 for the past 5 years to run my small home based architectural design business. I have been using the internal hard drive & backing up the necessary data to a simple usb external hard drive. I am now looking to firstly purchase a new imac 27" retina and purchase new autocad lt 2015 for mac software. I am looking to have another imac (my old mac) running in conjunction with the new mac. I want both macs to be able to access the same data and am slightly unsure what is the best way to achieve this.....As my old mac is currently only running snow leopard and an old version of autocad for mac 2011 it wont run on any more recent OS. Essentially i believe I have 2 main options with this.... (1) I Accept that I have to purchase 2 no. autocad lt 2015 licences @ a cost of £2300. Or option (2), I only run autocad on the new mac as this will be the primary station and the old mac used for primarily for admin & accounts. I have also recently discovered that it is possible to rent autocad licences for £300p/a which may also be another option (3)!
    I previously had a problem where my hard drive failed on my mac & lost all data on the internal hard drive, luckily I had been backing up all data regularly to my external hard drive and now loss occurred! Obviously with any new system I want to ensure that my data is safe!
    I currently utilise about 250GB of data for business operations but this will obviously grow with time.
    In the future I would like to have the option of potentially being able to access the network data remotely via macbook pro whilst abroad although at this stage this really isnt my primary objective. Although I believe I could achieve this through apple remote desktop.
    I suppose I should provide some information with regard to the required speed of the system...I regularly open 50-100 photos at the same time totalling around 250-500MB. I would like the system to be able to handle this fairly easily.
    I have been trawling through forums and to be honest they are totally confusing me. I have also spent time on the phone to the apple business team and have also discussed my objectives with a member of the apple team in store.
    There have been various options advised to me and I really do not know which is the most appropriate route forward.
    1 - Using a mac mini as the file server and linking the 2 mac devices to this and backing up the mac mini to an external hard drive to ensure no loss of data.
    2 - Using a time capsule as a file server and linking the 2 mac devices to this and backing up the TC to an external hard drive to ensure no loss of data.
    3 - Using the new mac hard drive and linking the 2 macs via thunderbolt (old mac does not have thunderbolt and so I guess I would need another new mac?!) and then backing up the data to a time capsule.
    4 - Using a RAID based server and linking the 2 no. macs.
    Sorry to ramble but any advice really would be greatly received!

    Hi sblemings,
    Welcome to the community.
    I think with your scenario you should ask yourself, how complicated do you want the setup to be and how much time would you have to be able to resolve an issue should one occur with this setup.
    All the options that have been advised would work but they come with complexity and therefore time.
    1 - Using a mac mini as the file server and linking the 2 mac devices to this and backing up the mac mini to an external hard drive to ensure no loss of data.
    2 - Using a time capsule as a file server and linking the 2 mac devices to this and backing up the TC to an external hard drive to ensure no loss of data.
    3 - Using the new mac hard drive and linking the 2 macs via thunderbolt (old mac does not have thunderbolt and so I guess I would need another new mac?!) and then backing up the data to a time capsule.
    4 - Using a RAID based server and linking the 2 no. macs.
    Sorry to ramble but any advice really would be greatly received!
    option 1
    Would be a way to achieve what you want, it would centralise your files and you would only need to backup your file server (as long as all the files you wanted backed up were on it). This could be achieved either using the client and sharing various folders or using Server which would give you more options than you would possibly need.
    option 2
    This is exactly like option 1 except that you wouldn't have to administer another mac however you may limit any future growth.
    option 3
    This option I probably wouldn't pick, you could achieve this with firewire and use a firewire to thunderbolt adapter (saves you having to buy a new iMac)
    option 4
    This option would, depending on your RAID level, give you disk redundancy but remember you would still need to back this up, as RAID is NOT a backup solution.
    I would also ask is there a pressing need to keep the old iMac in service and complicating things by having a server / NAS? Could you not just transfer all your information over to this and continue with the one backup? I would say that doing it this was would be the simplest way of achieving what you want from what I can take from your question.
    As for remotely accessing your data, if you have the right hardware the way to achieve this would be to use a VPN and connect back to your data. However a potentially easier way for you ,would be to use a service like logmein or teamviewer to connect back.
    Hope this helps, and by all means any questions please ask.
    Dan
    How to set up a basic file sharing server for my small architectural business?

  • How to set up Airport Express in Bridge mode for hotel use

    Please provide step by step instructions on how to set up Airport Express in Bridge mode for hotel use. I do not have a computer with me, only an iPhone and AEX 802.11n.

    +"Please provide step by step instructions on how to set up Airport Express in Bridge mode for hotel use. I do not have a computer with me, only an iPhone and AEX 802.11n."+
    AirPort Utility is the application that must be used to setup and make any configuration changes to the AirPort Express. I'm not aware of an "App" for this.
    If you could borrow a computer from someone there for 30 minutes or maybe use the computer in the lobby, you could download AirPort Utility and reconfigure your Express. To help with setup, use an ethernet cable from the computer to the Express to help AirPort Utility "see" the Express.
    http://support.apple.com/downloads/#airport

  • How to set JDBC Data Sources in Oracle MapViewer for Oracle database 12c Release 1 (12.1.0.1)

    How to set JDBC Data Sources in Oracle MapViewer for Oracle database 12c Release 1 (12.1.0.1)?
    The following is my configuration in the conf\mapViewerConfig.xml:
    <map_data_source name="mvdemo12"
    jdbc_host="127.0.0.1"
    jdbc_sid="orcl12c1"
    jdbc_port="1522"
    jdbc_user="mvdemo"
    jdbc_password="7OVl2rJ+hOYxG5T3vKJQb+hW4NPgy9EN"
    jdbc_mode="thin"
    number_of_mappers="3"
    allow_jdbc_theme_based_foi="true"
    editable="true"/>
    <!--  ****  -->
    But it does not work.
    After use "sqlplus mvdemo/[email protected]:1522/pdborcl", it connected to the Oracle database 12c.
    Does anyone know it?
    Thanks,

    For 11.1.1.7.1 use the syntax for jdbc_sid, i.e.
    //mypdb1.foo.com as described in the README,
    - MapViewer native (non-container) data sources can now use database service name in place of SID. To supply a db service name, you will use the same jdbc_sid attribute, but specify the service name with double slashes in front, such as follows:
      <map_data_source name="myds"
        jdbc_host="foo.com"
        jdbc_sid="//mypdb1.foo.com"
        jdbc_port="1522"
      />
    For 11.1.1.7.0 use a container_ds instead.
    i.e. instead of using
    <map_data_source name="my_12c_test"
                       jdbc_host="mydbinstance"
                       jdbc_sid="pdborcl12c"
                       jdbc_port="1522"
                       jdbc_user="mytestuser"
                       jdbc_password="m2E7T48U3LfRjKwR0YFETQcjNb4gCMLG8/X0KWjO00Q="
                       jdbc_mode="thin"
                       number_of_mappers="6"
                       allow_jdbc_theme_based_foi="false"
                       editable="false"
       />
    use
      <map_data_source name="my_12c_test"
                       container_ds="jdbc/db12c"
                       number_of_mappers="6"
                       allow_jdbc_theme_based_foi="false"
                       editable="false"
       />
    In my case the Glassfish 3.1.2.2 JDBC connection pool definition was
    Property
    url  jdbc:oracle:thin:@mydbinstance:1522/pdborcl12c.rest_of.service.name
    Uncheck the Wrap JDBC Objects option in Advanced panel, i.e. the Edit JDBC Connection Pool Advanced properties page.
    Add a JDBC resource for that newly created pool
    Use that in mapviewerconfig.xml as above

  • How to fetch APPROVER NAME  and approval date dynamically for an user

    Hi all..
    How to fetch approver name and approval date dynamicall for an user in an email template..
    can any help me to sort out this pbm,i am new to IDM..
    Thanks in advance..

    Access policies get a static value.  You can't populate a field with an adapter.  If you must do this, leave the field blank, and put an adapter on the process form for your field that must be populated using code or logic.
    -Kevin

  • How to disable the validity of a particular Role for 100 users, in a single

    Hi
    How to disable the validity of a particular Role
    which is assigned to 100 users. (disabling the role of change the validity of the role )
    at present am doing manually, by entering into each user and changing the validity of the role
    Thanks.

    > How to disable the validity of a particular Role for 100 users, in a single ...
    ... shot?
    Assign a reference user to the 100+ users and create events in the factory calendar which assigns and removes the role from the reference user only.
    The downside is that it is not scalable for many of the same concepts at the same time, because a dialog user can at one logon time only have one reference user assigned to them.
    Cheers,
    Julius

Maybe you are looking for