How to set up that a CRM order is transferred to SCM?

Where must the setting be done that a CRM order is transferred to SCM?

Hi,
You have to do the middleware config in CRM and few settings in SCM system to replicate orders. After doing the setting you have to start the initial load and then the delta load will be taken care automatically based on settings.
Go through the below link it might help.
http://help.sap.com/saphelp_sm40/helpdata/EN/3f/40623c046a9b67e10000000a11402f/frameset.htm
Regards,
Sanjay

Similar Messages

  • How to Set User Status of Sales Order at item level.

    How to Set User Status of Sales Order at item level by default to 'Purchase Req Not Created' (example)while creating order. Please tell EXIT Name to be triggered & Internal table to be populated.
    Thanx,
    Srini
    Moderator message: please do your own research before asking.
    Edited by: Thomas Zloch on Feb 21, 2011 11:19 AM

    Mathew,
    Here is a document that should help you get started on enhancing 2LIS_11*
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c09d5356-d8c4-2d10-8b84-d24723fc1f0a?QuickLink=index&overridelayout=true
    Good luck!

  • HT1918 I need to change my country in the itunes store, but can' do so, because of a $0.10 credit. How can I spend that money in order to change accounts.

    I need to change my country in the itunes store, but can' do so, because of a $0.10 credit. How can I spend that money in order to change accounts.

    Click here and request assistance.
    (70172)

  • [ISA 4.0 SP5] How to set the language of an order

    Hi,
    how to set the language of an order?
    I use address.setCountry( myCountry ) and works fine, but:
    an Order in R3 has also a field "Language" under the tab "Communication", but it's not set automatically, corresponding to the country.
    How do i set this field on the Java-side in InternetSales 4.0 Sp5?

    Hi vikram!
    Sorry for the still inconvenience, but I'm getting this error:
    Error in method invocation: Static method sendNotification( com.sap.odp.usermgmt.masterdata.UserAccountBo, com.sap.odp.usermgmt.masterdata.UserAccountBo, com.sap.odp.api.comp.messaging.MailTypeEnumType, java.util.Properties, null, null ) not found in class'com.sap.odp.api.util.NotificationUtil'
    Im making the code the following way:
    Properties params = new Properties();
    params.put(new String("PHASE_NAME"), faseName);
    params.put(new String("DOCUMENT_TYPE"), docType);
    params.put(new String("DOCUMENT_NAME"), contractName);
    params.put(new String("RECIPIENT_FIRST_NAME"), nombre);
    params.put(new String("OWNER_FIRST_LAST_NAME"), owner.toString());
    params.put(new String("START_DATE"), fecha);
    params.put(new String("ORG_UNIT"), orgUnit);
    params.put(new String("INSTRUCTION"), "");
    params.put(new String("DOCUMENT_HEADER_URL"), vinculo);
    recipients = IapiAccountLocator.lookup(session, collaborator.getPrincipal()); // This Changed.
    ( I also tried like this:
    IapiAccountIfc recipients = IapiAccountLocator.lookup(session, collaborator.getPrincipal());)
    sender = session.getAccount();
    mailTypeEnum = new MailTypeEnumType(MailTypeEnumType.ODP_WORKFLOW_APPROVAL_REQUEST_MSG);
    NotificationUtil.sendNotification(recipients,sender, mailTypeEnum,params,null,null);
    Thanks again!

  • How to update user status in CRM Order depending the delivery status in R/3

    Hi All,
    In my scenario the partial delivery allowed to the customer while creating the CRM Order. But as per my requirement the status should be updated when the complete order and delivery takes place.
       Let me describe you clearly:
    Suppose I want to deliver 5 quantities products to the customer but initially I want to deliver only 3 quantities and rest 2 quantities later. When I do the post goods issue of 3 quantities in R/3 system the status should not change in CRM system. When I will do the rest 2 quantities in post goods issue in R/3 then the user status should change in CRM Order. But in current when I do the delivery of 3 quantities the user status is changing in CRM Order.
    I need the user status should change in CRM only when the entire deliverytakes place in R/3.
    Thanx
    Chinmaya

    Whenever an item is fully delivered, by standard, a "Completely Delivered" status will be updated into the item. If the I suppose by referring to that you will know an item is partial or completely delivered. When all items in the order is fully delivered, the standard header status will set to "Completed". So, you will also know if the whole order is partial or completely delivered.
    If you want to add a user status, the simplest, you can make use of the ORDER_SAVE Badi. Just call the function CRM_STATUS_MAINTAIN_OW. You can update both header and item status.

  • How to set the data packet in order??

    we have 20 datapackets that is in sequence order how to set in order wise ?
    Example:- this is the scenario Data packets is in this order 20,1,10,5,9,13,4,8,13,2,15,19,14Like this
    I have to set in order wise how to doit??????

    HI
    I think you sjust should use a process chain.
    Call transaction RSPC and build it within the order needed.
    regards
    Tom

  • How to set Delivery Status on Sales Order

    Hello CRM Experts
    I am  using CRM 7.0 (Webclient) in standalone mode.
    I've created a Sales Order and would like to complete the line item.  But the delivery status field is disabled.  I've read several posts on the forums about delivery data for a sales item in CRM.  What I've understood is this:  Delivery is handled outside of the CRM system e.g. by ECC or other systems. Therefore the status has to be updated by the external system (Is this a correct statement?)
    Our security team has checked the security and didn't find anything there.  I'm logged in using SALES PRO role. 
    I'd appreciate your insights.
    Thanks!

    This is already available in the additional line information..though..
    If you still want that at line level to be displayed..maybe you need to customize the form...not sure how u can handle that logic
    Mahendra

  • How to set up Knowledge article CRM on HANA

    Dear All,
    We are using HANA database as a primary database. I'm in process of configuring Knowledge management using the best practice C3G/C29.
    I did not get answers to below questions even after reading documentation on knowledge management and OSS notes(1254901,1517236,1703338,1730098,1770286,1773525,1777201,1789329,1789386,1792053,1816407,1817417).
    1. Is it necessary to Install TREX even though the database is HANA ?
    2. How to connect SAF(software agent framework) to HANA  , SAF uses TCP/IP RFC connections to TREX ?
    I have selected HANA database as search engine in below path.
    SAP NetWeaver system and launch the Implementation Guide (IMG) by using transaction SPRO. Navigate to the node  Search and Operational Analytics  Common Settings for Operational Analytics and Embedded Search  Configure Indexing  Define TREX/BWA Destination or SAP HANA Database Connection .
    As I'm using HANA database I can't use RFC destination of TREX TCP/IP connections and TREX was not installed.
    Please guide me how to set up knowledge article in CRM on HANA db.
    similar issue thread is unanswered since a year.
    How to Knowledge base set up in SAP CRM 7 EHP 3 using HANA
    Thanks,
    Naveen.

    Hi there,
    Please update anyone has idea on above issue.

  • How to set User-field in Plan order

    Hi
    could you tell me please how to set a user-filed in plan order. when I run MRP planing, I can write some data in this filed.
    thanks
    henry

    Hi,
    Actually these user defind fields are used/assigned in the routing.
    Initially u have to define your own user defind profile through OPEC transaction.
    Assign this profile in the routing.
    So when ur executing Mfg activities, suppose if ur using some high materials like silver...etc.
    Then after executing the particular operation some amount of silver chips or silver scrap will generated .
    To keep chip/scrap qty operation and date which user defind is used.
    Once u have assigned this profile to routing, then it will be automatically copied in the planned order/production order.when ur confirming the order then u have to enter the all related data.
    Regards
    Vijay

  • How to set variables that queries can use?(10g)

    I am using only ONE TABLE here for all queries. I have one query which pulls out a key and seven other queries that create seven different report sections based on that key. All queries access data in the same table.
    The first query ahould set a key so the other seven can use that key to get data. The key changes everytime all seven queries get executed and a report page is displayed, then the queries use the new key until all keys generated by the first query are used.
    Questions?
    How do I get the seven queries to check that key. Can you have (declare) variables in Reports Builder that you can assign a value in every iteration and then include a check (for that value)in a where clause of other queries? If yes how would I do that?
    In a programming language this is simple, you pass the same value as a parameter to several functions... Can you do something similar here and set a value that all queries can check against? Like a local or global variable.
    Thanks
    Mike

    Sorry, I guess there were a few typos in my last post!
    OK. All data is pulled from the same table. Here is how the report should look:
    KEY (a number)
    Data from query 1 that belongs to key above
    more Data from query 1 that belongs to key above
    more Data from query 1 that belongs to key above
    Data from query 2 that belongs to key above
    more Data from query 2 that belongs to key above
    more Data from query 2 that belongs to key above
    Data from query 3 that belongs to key above
    Data from query 4 that belongs to key above
    Data from query 5 that belongs to key above
    Data from query 6, same
    Data from query 7, same
    END OF PAGE 1
    (there is a maximum 45 possible data lines so data will not exceed the length of a page)
    Next Page:
    KEY (a different number)
    Data from query 1 that belongs to key above
    more Data from query 1 same
    more Data from query 1 same
    Data from query 2 same
    more Data from query 2...
    more Data from query 2....
    Data from query 3 same
    Data from query 4...
    Data from query 5.....
    Data from query 6....
    Data from query 7....
    END OF PAGE 2
    Other pages all look the same. Data from each query is based on the key on the first line and so on.
    Example:
    select ipseries from ipTable (possibly for query 1)
    select ipSeries,sum(ipvalue1+ipValue2+ipvalue3) from ipTable (query1) group by....
    select (sum(ipvalue1+ipValue2+ipvalue3)/3) from ipTable (query2)
    select (sum(ipvalue1*ipValue2*ipvalue3)) from ipTable (query3)
    and so on. Each query puills a set of values or sums a set of values.... etc.
    (please note that what I have not included is that somehow we need to relate each query with the key)
    Thanks a lot

  • How to obtain GUID of a CRM Order Object

    Hello, I want to retrieve an external reference number of a CRM Order. First I should obtain the GUID of a CRM Order Object(component type CRMT_OBJECT_GUID). My problem is, which FM should I use?
    Thanks.

    Hello sasi,
    thanx for your help, with which I go a step further. What I need is to obtain a service order GUID(at last the external reference number) according to a notification number in SAP Support Desk. In CRM_JCDS, CRM_JEST I got a lot of infos but not the notification number, so that I could not establish a relationship between them. And I'm not quite clear what you mean by FM STATUS_TEXT_EDIT(why I should edit the status text)? Can you explain more?
    Greetings.
    Nuno.

  • How to set not synchonize from CRM to R/3 in some type of business partner

    Dear Sir,
    our office have the ECC6 and crm 5.0, we have the some typel business partner synbetween r/3 and CRM . However, we had  setting one bussiness partner number with external number , and we are not allow to synchoize back to r/3 . Where can i settting??
    Please kindly advise.
    Thank you and best regards
    Vimol

    Dear Krisnen,
    Please kindly clarify for more your explanation . We never use t-code: smoeac. So, I don't know how to configure it .
    THnak you and best regards,
    Vimol

  • How to set deletion flag in Production order item level

    Hi Friends,
    I have a requirement like...
    Suppose production order conatians 100 items. now i want to set deletion flag for 20 items only.
    In Co02 t.code deletion check box is disable mode.
    There are nearly 100 production orders .i have to write the program....
    Is there any BAPI or other way to meet this requirement.
    Can you please help me..

    Also, You might want to have a look at the BAPIs like BAPI_PRODORD_SET_DELETION_FLAG which are used to set the deletion indicator but it appears to me the deletion flag can only be set at the header level using these BAPIs.
    Please have a look at SAP business object BUS2005 methods from transaction SW01 for more Production Order related BAPIs.
    One more thing ... since you mentioned that in CO02 the deletion indicator is greyed out, then it might mean you are missing the authorizations to set the deletion flag. Please consult with your Authorization (BASIS) administrator. As a hint, the authorization object here is C_AFKO_AWK.
    Cheers,
    Aditya

  • How to set partial delivery for Purchase Order line item

    Hi Team
    We have created a PO for 100 quantity along with 25% over delivery tolerance.  We have done 5 GRNs totaling for 95 quantity.  when we try to do another 10 quantity, system not accepting the GRN.
    I want to set the partial delivery for this line item.  Please help how to do this.
    regards
    Ravi

    where did you check the underdelivery tolerance of 0?
    the PO is the place to check, changes in material master will notz effect existing POs.
    if you removed the delivery complete indicator and the item still does not show up in MIGO, then set the "propose all items in MIGO settings"
    if it still does not show up, then you might have other restrictions like confirmations , last goods receipt etc.
    the error 'Document does not contain any selectable item" is often discussed in this forum, you will find numerous threads that list what you have to check.

  • How get the user that use CRM in my web site

    Hi all,
    I have a web app that connect to my CRM. I use C#.
    I connect to CRM with my credential because I'm admin in CRM.
    But my app is used from others CRM user and I need to know who is systemuser CRM that use app.
    I need the same of Xrm.Page.context used in js or the same context used in plugin, but I have the problem that I connect  to CRM with my user. So If I use WhoAmIRequest class I have my userid and not the userid of the user that use my web app.
    Is it possible know this? Do I change my login with user login in CRM?
    Thanks

    Hi,
         As you use system admin to connect to CRM, WhoAmIRequest does not return the user from website. You are correct. Change that so that it uses logged in user however be aware that means each user needs to be a valid CRM user else they
    will get not a valid user error.
    Hope this helps.
    Minal Dahiya
    blog : http://minaldahiya.blogspot.com.au/
    If this post answers your question, please click "Mark As Answer" on the post and "Vote as Helpful"

Maybe you are looking for