How to set value to a input list of values?

Hi,
I'm using Jdev 11.1.2.0
I'm using model driven input list of values in page.
In inputtext of that list of values, When I entering the exact value(if only one value exists with that value)  say for example 100, then that value is getting set to inputlistvalues without opening the popup.
But if i enter 10 and then click on enter then popup launches with values like 10,100,101,1001... (starts with 10).
Is there any possibility that we can do like, if i enter exact value which is exists in the list of values, then that value should be set without launching the popup to show more values?
How to achieve this.
Any suggestion would be appreciated.
Thanks.

<af:inputComboboxListOfValues id="departmentNameId"
          popupTitle="Search and Select: #{bindings.DepartmentName.hints.label}"
          value="#{bindings.DepartmentName.inputValue}"
          model="#{bindings.DepartmentName.listOfValuesModel}"
          required="#{bindings.DepartmentName.hints.mandatory}"
          columns="#{bindings.DepartmentName.hints.displayWidth}"
          shortDesc="#{bindings.DepartmentName.hints.tooltip}">
<af:autoSuggestBehavior   suggestedItems=""#{bindings.DepartmentName.suggestedItems}" />
      <f:validator binding="#{bindings.DepartmentName.validator}"/>
    </af:inputComboboxListOfValues>
try this if it helps ....

Similar Messages

  • How to Hide advance button in input list of values Popup

    I am using input List Of Values component to select value from search Pop up, in that popup i need only basic search only , i am unable to hide advance button... plase tell me how to hide this advance option

    I haven't tried this, but check
    How to remove basic/advanced button in inputListOfValues search dialog
    This does not have complete solution, but might give you some lead.

  • How to set No Selection Attribute in List of Values?

    Hi Everyone,
    I'm developing an ADF form which has a List of Value(LOV) as a requirement.
    I've got it working based on a View Object. However, I'm trying to set the No Selection option in the LOV and it doesnt seem to work. I've set it to the "Labelled Item - First of List" - <Please select a reason>. That doesnt seem to do the trick.
    Is there another attribute I need to set?
    I'm using JDev 11g.
    Many thanks.
    PP.

    if you are using the af:selectonechoice then use it like
    unselectedLabel="Please Select"but its better to debug why you are not getting this done from the VO.. can u give more information on this to solve it in the model itself..
    did u check if the VO is updated properly with the changes???

  • Input List of values

    I currently have a input text field.
    How do I convert to a "Input List of values".
    I do have the lookup VO that needs to be used in the list of values.
    I tried the "right click" -> convert -> that does not show the "Input List of values".
    Thanks

    create lov popup manually..have af:inputText (set autoSubmit to true) & af:commandImageLink (get magnifier image from adf image lib). within af:commandImageLink invoke popup.
    create af:popup
    d&d vo as table
    to search pass inputText binding and execute vo
    have a ok button and get the selected row value

  • Input list of values resizing popup in adf?

    I have a screen for example.
    [http://2.bp.blogspot.com/_YeFnEaxTQCI/SloGR7HW6II/AAAAAAAAAKM/3-QP8OrYhns/s1600-h/lovbug2.jpg]
    and need to change the width of the popup the input list of values.
    I am a novice in adf.
    I need help
    sorry for my English

    Thanks Puthanampatti..
    Problem here is how to execute the methods because
    1) I have to set two bind parameters
    2) Not able to catch the action/action listner on button click
    Pls. pass your suggestions.
    Thanks
    Kanika

  • I need to validate Input List Of Values Field when Inserted From Bean

    I've two view object EmployeeView and DepartmentsView
    In Employee View I've changed Department_Id to Input List OF Values
    I've created a bean to inset data into Employee Table
          ApplicationModule am = ADFUtils.getApplicationModuleForDataControl("AppModuleDataControl");
          ViewObject importedVO = am.findViewObject("EmployeesView");
    try {
                newEmp.setEmployeeId(new Number("3424));
                newEmp.setFirstName("Test Fname");
                newEmp.setLastName("Test Lname");
                newEmp.setEmail("[email protected]");
                newEmp.setPhoneNumber("4643131345");
                newEmp.setJobId("AD_VP");
                newEmp.setDepartmentId(new oracle.jbo.domain.Number(999));
                 } catch (Exception e) {
                // TODO: Add catch code
                System.out.println("inside Catch");
                e.printStackTrace();
            }I know that ADF validate Input list of values when inserting new value on it
    when I've enabled the debugger I've found that
    <ViewObjectImpl><buildQuery> [604] SELECT DepartmentsEO.DEPARTMENT_ID,         DepartmentsEO.DEPARTMENT_NAME,         DepartmentsEO.MANAGER_ID,         DepartmentsEO.LOCATION_ID,         DepartmentsEO.ISDELETED FROM DEPARTMENTS DepartmentsEO WHERE ( ( (DepartmentsEO.DEPARTMENT_ID = :vc_temp_1 ) ) )
    <ViewObjectImpl><bindParametersForCollection> [605] Bind params for ViewObject: [com.test.model.views.DepartmentsEOView]AppModule.__LOCAL_VIEW_USAGE_com_test_model_views_EmployeesEOView_DepartmentsView_findByVC_12_LOV_DepartmentId_lov__filterlist__vcr___
    <OracleSQLBuilderImpl><bindParamValue> [606] Binding param "vc_temp_1": 999
    <ViewObjectImpl><processViewCriteriaForRowMatch> [607] VCs converted to RowMatch:  ( (DepartmentId = :vc_temp_1 ) )
    <ViewRowImpl><handleListBindingMismatch> [608] No matching row found for list binding:LOV_DepartmentId for ViewRow:oracle.jbo.Key[34235 ]
    <ViewRowImpl><handleListBindingMismatch> [609] --- filterList ValueMap key:DepartmentId, value:999
    <DCBindingContainer><internalRefreshControl> [610] **** refreshControl() for BindingContainer :com_test_view_testInsertPageDef
    <JUCtrlHierNodeBinding><release> [611] released: ROOT node binding:noCtrl_oracle_adfinternal_view_faces_model_binding_FacesCtrlHierNodeBinding_2, value:EmployeesViewIterator
    <JUCtrlHierNodeBinding><release> [612] released: ROOT node binding:noCtrl_oracle_adfinternal_view_faces_model_binding_FacesCtrlHierNodeBinding_2, value:EmployeesViewIterator
    <DCIteratorBinding><releaseDataInternal> [613] Releasing iterator binding:EmployeesViewIterator
    <ApplicationPoolMessageHandler><doPoolMessage> [614] **** PoolMessage REQ ATTACH LWS
    <ApplicationPoolMessageHandler><doPoolMessage> [615] **** PoolMessage REQ DETACH LWS
    <DCJboDataControl><initializeApplicationModule> [616] (oracle.adf.model.bc4j.DataControlFactoryImpl.SyncMode = Immediate
    <DCBindingContainer><internalRefreshControl> [617] **** refreshControl() for BindingContainer :com_test_view_testInsertPageDef
    <DCBindingContainerState><validateToken> [618] Process BindingContainer state token(decompressed state):BCST:=0%V%=NEmployeesViewIterator=-D-,
    <this means that ADF tries to validate the input list of values "Department_Id" and didn't found any match
    I need to through exception when I try to set Department_ID with invalid value "value not on range" like
    newEmp.setDepartmentId(new oracle.jbo.domain.Number(999));I don't want to validate it manually as I've a lot of fields.
    I need to through exception when try to
    newEmp.setDepartmentId(new oracle.jbo.domain.Number(999));

    Thanks Timo
    this is the code that I use
          ApplicationModule am = ADFUtils.getApplicationModuleForDataControl("AppModuleDataControl");
          ViewObject importedVO = am.findViewObject("EmployeesView");
          EmployeesEOViewRowImpl newEmp = (EmployeesEOViewRowImpl)importedVO .createRow();
          importedVO .insertRow(newEmp);
    try {
                newEmp.setEmployeeId(new Number("3424));
                newEmp.setFirstName("Test Fname");
                newEmp.setLastName("Test Lname");
                newEmp.setEmail("[email protected]");
                newEmp.setPhoneNumber("4643131345");
                newEmp.setJobId("AD_VP");
                newEmp.setDepartmentId(new oracle.jbo.domain.Number(999));
                 } catch (Exception e) {
                // TODO: Add catch code
                System.out.println("inside Catch");
                e.printStackTrace();
            }

  • Urgent.. Tab out issue with ADF 11g Input List of Values..

    Hi,
    I have Customer Number Input List of values on the page(some people also "torch").When we type customer number and tab out it's not bringing the customer name automatically.
    It would be really appreciate if anyone can help me on this..
    Thanks

    Hi Frank,
    The scenario is like this:
    I have a LOV on Item Field,and the Customer table has CustomerNumber and CustomerName(around 100k records).
    User Enters the CustomerNumber say 1000 then the LOV Window should automatically validate and findout the CustomerName without poping up the window.
    Actually what ever user entered is a correct value.how can i solve this issue , if there is a correct matching value in table it shouldn't open up the LOV window.
    I am using jDeveloper 11.1.1.0.0
    Please let me know if you need any further infomation.
    Thanks

  • How can we allow over 103,718 list of values to display in webi report selection?

    I know, why would we want to?
    Our business users would like to see the list ordered and first select from a range and drill down.
    Any query in information design tool already does this as well as the preview values for the LOV object.
    Is there a way to make large LOV function this way in webi query/report?
    If not, is there a way to move beyond the warning of 'Partial list'?

    These are all dependent parameters for LOV
    At BO Server level
    Web Intelligence Processing Server-> Maximum List Of Values Size (entries) - 50000 (default)
    Web Intelligence Processing Server-> List of Values Batch Size (entries) -1000 (default)
    At Universe level
    Array Fetch parameter at database.PRM file.
    Limit size of result set to --  parameter
    Query Level
    Max rows retrieved ( Click Query Properties to display the "Query Properties" dialog box.)
    You can try below steps
    Follow these steps to change the maximum size for a list of values:
    Log in to Central Management Console.
    Click Servers.
    Right click Web Intelligence Processing Server and select Properties.
    Increase the value of Maximum List Of Values Size (entries).
    Save and restart the Web Intelligence Processing Server.  Note: Setting large number for Maximum List Of Values Size (entries) may affect the performance of Web Intelligence. It is recommended to set the appropriate number according to the system performance.

  • How to set the gain and input coupling for each channel on a NI 4462 DaQ card?

    I've seen a few examples in how to set the gain for NI 4462, but none tell me how to chose the channel I wish to set this gain.  Also the same problem with input coupling
    Does anyone know how to set the gain and input coupling for each individual channel?
    Thanks,
    Hector
    LabView 8.5 Windows XP

    Hey Hector,
    http://forums.ni.com/ni/board/message?board.id=100&thread.id=1688
    This has a few examples of how to do that.  Let me know if you have further questions.
    Have fun!
    -gaving

  • Message Mapping UDF for lookuping of a value inside field's list of values

    Hey everyone,
    For a FI mapping I'm working on, I was wondering if somebody has some Java UDF which lookups for a value inside the whole list of values which the mapping gathered for a specific field?
    Thanks,
    Ben

    source code --
    //write your code here
    JCO.Repository myRepository;
    // Change the logon information to your own system/user
    JCO.Client myConnection = JCO.createClient(
    // all the client information namely client ,user id pwd etc
    myConnection.connect();
    // create repository
    myRepository = new JCO.Repository( "SAPLookup", myConnection );
    // Create function
    JCO.Function function = null;
    IFunctionTemplate ft = mRepository.getFunctionTemplate("xxxxx"); //Name of RFC
    function = ft.getFunction();
    // Obtain parameter list for function
    JCO.ParameterList input = function.getImportParameterList();
    // Pass function parameters
    input.setValue( a , "xxxxx" ); //import parameter of RFC, a is input argument.
    myConnection.execute( function );
    String ret = function.getExportParameterList().getString( "XXXX" ); //export param
    myConnection.disconnect();
    return ret;
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a03e7b02-eea4-2910-089f-8214c6d1b439
    File Lookup in UDF
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/file%2blookup%2bin%2budf
    Lookupu2019s in XI made simpler
    /people/siva.maranani/blog/2005/08/23/lookup146s-in-xi-made-simpler
    SAP XI Lookup API: the Killer
    /people/alessandro.guarneri/blog/2006/03/27/sap-xi-lookup-api-the-killer
    Webservice Calls From a User Defined Function.
    /people/bhavesh.kantilal/blog/2006/11/20/webservice-calls-from-a-user-defined-function

  • How to set the current month as the default value of an input control?

    Hello,
    I want to set the current month or current year as the default value of an input control. Something like try to get the month from the currentdate() formula and assign it to the input control.
    Is this possible?
    Thanks & Regards
    SU

    >
    soauniverse wrote:
    > Hello,
    >
    > I want to set the current month or current year as the default value of an input control. Something like try to get the month from the currentdate() formula and assign it to the input control.
    >
    > Is this possible?
    >
    > Thanks & Regards
    > SU
    I don't think so.  I tried to find a property or something in that Input Control but there is nothing to set it that way.

  • How do I bind variables in a List of value

    I'm using jdev 11g. I have an updatable view object for which I want to use a list of values on a few fields. I have defined a read-only view object that query a table that contains several list of values based on a column call domain. How do I narrow the returned list of values with a bind variable. Or do I need to define a view object for each domain?

    Hi Frank,
    Thanks for your reply. After playing with different options with the list of values, I came to the conclusion that this functionality has been added to 11g to replicate Form's LOV functionality. However, if I select a radio group as the default list type, the filter option is grayed out. Also, i'm not sure i understand the relationship between the default list type and the control type on a page. I tried to define a default list type as Input Text with List of Values which let me add a filter, and on my page I dropped the field as a single selection radio group. In this case the filter does not work. Only if i drop a List of Value the filter will work but i don't want this king of interface.
    The way i did this with 10g was to define a view object with bindings and set the bind variable value on the binding page using a invokeAction. Is it still the way to do this in 11g?

  • Input List of values in Query panel

    Hi ,
    Problem statement ::
    Develop a page which should have Query panel and table . Query panel should have 2 fields and on the basis of these input values underlined table should display the values.
    These 2 fields should be inputListOfValues( Input field with search option on this fields ).
    What we are doing :
    1. Creating Field1_in_Query_panel_LOV_VO view object with UI hint as Input Text with List of Values.
    2. Creating Field2_in_Query_panel_LOV_VO view object with UI hint as Input Text with List of Values.
    3. Creating Table_VO with required query , and attaching the view criteria for Field1 and Field2 .
    4. IN the Attributes section , we are creating LOVs for Field1 and Field2 with View objects created in step 1 and step2.
    5. Normal procedure of dragging and dropping the search criteria option on the page and creating the query with ADF table.
    When we are running the page , the Query panel fields are coming in the drop down with no of values restricted to 10.
    Pls suggest a way to achieve this functionality mentioned in the problem statement.
    Jdev version used : 11.1.1.6
    Edited by: 954422 on Aug 23, 2012 12:28 AM

    Hi,
    Welcome to OTN.
    Have you tried setting the range size for the vo (which is used as LOV on your main VO) to -1 and see if it works then?
    Note : If your have more values to be displayed in LOV, it is better to use InputListOfValues instead of SOC
    -Arun

  • Validation error message is not displayed for an attribute as an Input List Of Value

    Hi everyone,
    I use jdev 11.1.1.7.0
    In my application I've created an Entity Obj and a View Obj base Employees table.
    for the JobId attribute I've taken actions as listed below:
    1. in Employees EO I've created a validation for this attribute and in some cases an error message returns (the error message is "the salary is not high"):
         * Validation method for JobId.
        public boolean validateJobId(String jobid) {
            if (...) {
                return false;
            if (...) {
                return false;
            if (...) {
                return false;
            return true;
    2. in Employees VO  I've created a LOV for this attribute (the view accessor is JobsViewObj ) and I display the attribute as an Input Text with List Of Values.
    in jspx page I drag& drop this attribute as below:
              <af:inputListOfValues id="jobIdId"
                                    popupTitle="Search and Select: #{bindings.JobId.hints.label}"
                                    value="#{bindings.JobId.inputValue}"
                                    label="#{bindings.JobId.hints.label}"
                                    model="#{bindings.JobId.listOfValuesModel}"
                                    required="#{bindings.JobId.hints.mandatory}"
                                    columns="#{bindings.JobId.hints.displayWidth}"
                                    shortDesc="#{bindings.JobId.hints.tooltip}"
                                    autoSubmit="true">
                <f:validator binding="#{bindings.JobId.validator}"/>
              </af:inputListOfValues>
    I open the Popup and I select a row from the Popup list and then I click Ok. After that if the validation method(validateJobId) returns false, the error message("the salary is not high") must be show to the user. but the error message doesn't display. I don't understand why this happens.
    Can anybody guide me about this problem?
    Regards
    Habib

    yes, you're right, I've tested it in 12.1.3 and error message was displayed.
    it seems it's a bug(bad bug ) in both 11.1.1.7 and 12.1.2. and now what can I do? is there any way to display the the error message?
    Regards
    Habib

  • How can I use comma in the return values of a static list of values

    Hi all,
    I want to create a select list (static LOV) like the following:
    Display Value / Return Value
    both are "Y" / 'YY'
    one is "Y" / 'YN','NY'
    I write the List of values definition is like this:
    STATIC:both are "Y"; 'YY',one is "Y";'YN', 'NY'
    However, it is explain by htmldb like this:
    Display Value / Return Value
    both are "Y" / 'YY'
    one is "Y" / 'YN'
    / 'NY'
    I tried using "\" before the ",", or using single or double quote, but all these do not work:(
    How can I use a comma in the return values?
    Thanks very much!

    "Better still, why not process the code of both Y with 2Y and one is Y with 1Y? "
    Could you please explain in detail? thanks! I am quite new to htmldb
    In fact I have a table which has too columns "a1" and "a2", both the values of these two columns are "Y" or "N". AndI want to choose the records that both a1 and a2 are "Y", or just one of a1, a2 is "Y".
    So I write the report sql like this:
    "select * from t1 where a1 || a2 in(:MYSELECTLIST) "
    Thus, I need to use "," in the LOV, since expression list in IN(,,,) using ",".
    Any other way to implement this?

Maybe you are looking for