How to set VL 626 to warming message

Dear Expert,
Understand error message VL 626 is not controllable error message.
1. How could made system ignore this error message?
2. How could change it to warming message?
Regards.

Hi Chan,
First of all ..i wont suggest for changing this msg from error to warning..becoz thats the ways system should work as well as business..but anyway if you want to do...then here is the solution..
while doing reverse system calls function module WS_REVERSE_GOODS_ISSUE..in that when it check for date..it again calls another function module MESSAGE_STORE and here u have that message class VL and message number 626 and msg type as E....all u need to do is make this E to W...but dont do just as it is...
Pls involve ABAPer..explain the problem, show him the error and then show this fuction module...abaper will analysis and i am sure ur problem will be resolved
I hope this helps and resolves ur issue and if yes then pls reward pts.
one request is pls reply back whether this resolves or answers ur question or not becoz i have notice people not replying inspite of providing proper soultion
Regards
Jagdish

Similar Messages

How to set values of a parameterized message in ADF Faces?

Hi all,
i've got the following problem: I want to set the values of a parameterized message before i add the message to the FacesContext.
Contents of the message resource bundle:
testPage.successMsg.create=The device {0} was created successfully!
Code within backing bean method:
String message = getStringFromBundle("testPage.successMsg.create");
FacesContext.getCurrentInstance().addMessage(null, new FacesMessage(message));
In Struts/ADF UIX the following code did the job:
protected void setUIXInfoMessage(HttpServletRequest request, String key, Object[] args)
MessageData msgs = new MessageData();
MessageResources mr = this.getResources(request);
String msg = "";
if (mr != null)
msg = mr.getMessage(request.getLocale(), key, args);
msgs.addMessage(null, msg, null, UIConstants.MESSAGE_TYPE_INFO);
request.setAttribute(UIX_MESSAGE_KEY, msgs);
Can anyone help me with this problem? I have searched a lot in the Oracle ADF Development Guide and within forum, but did not find any solution.
Another interesting thing is, how to set the parameters from jspx-Code.
How can i achieve the same results in ADF Faces corresponding to the following UIX-Code:
<boundAttribute name="title">
<messageFormat format="${nls['deleteTip.confirmation']}">
<dataObject source="${bindings.TipName}"/>
</messageFormat>
</boundAttribute>
Resource Bundle:
deleteTip.confirmation=Do you really want to delete the tip {0}?
Another question:
What are the corresponding elements in ADF Faces corresponding to <concat> and <if> in UIX or what possibilites exist in ADF Faces to dynamically concatenate strings depending on certain conditions?
I know, these are many questions. I am familiar with UIX, but now i have to start developing applications with ADF Faces and there are some things i don't find corresponding equivalents.
Thanks in advance!
Regards,
Stefan

Hi,
SRDemo shows you how to do this declratively
<h:outputFormat value="#{res['srcreate.confirmPanel.message']}"
escape="false" id="nextButton">
<f:param value="#{requestScope.SRDEMO_CREATED_SVRID}"/>
</h:outputFormat>
where the <f:param ...> element sets the value of the variable
To programmatically access internationalized strings, SRDemo uses
private static ResourceBundle getBundle() {
FacesContext ctx = getFacesContext();
UIViewRoot uiRoot = ctx.getViewRoot();
Locale locale = uiRoot.getLocale();
ClassLoader ldr = Thread.currentThread().getContextClassLoader();
return ResourceBundle.getBundle(ctx.getApplication().getMessageBundle(),
locale, ldr);
public static String getStringFromBundle(String key) {
ResourceBundle bundle = getBundle();
return getStringSafely(bundle, key, null);
You take it from there and put it to a FacesMessage, If it uses parameters I guess you will have to parse the string
Frank

How to set acknowledgement flag in asynchronous message

Hello,
I just read in the documenation that it is possible to request acknowlegment messages by setting an "acknowledgement tag" in the request message.
My question now is how to set this acknowledgement tag and which rules I have to follow? Do you have any more information on this topic? I see the flags in "ReliableMessaging" but not sure how to set them.
Thank you.
Edited by: Florian Guppenberger on Dec 2, 2009 5:16 PM

Hi,
For idoc check this links
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe
I don't think it is possible for Proxy.
Regards
Ramesh

How to set font for title and message in JOptionPane?

Hi,
I have following test code.
JOptionPane.showMessageDialog(null, "Some Alert Message", "Alert", JOptionPane.ERROR_MESSAGE);In this code can we set font for "Some Alert Message", "Alert"?
Regards,
Kalyani......

roll-your-own?
import javax.swing.*;
class Testing
public static void main(String[] args)
 JDialog.setDefaultLookAndFeelDecorated(true);
 JOptionPane optionPane = new JOptionPane("<html>Your message here</html>");
 optionPane.setOptionType(JOptionPane.DEFAULT_OPTION);
 optionPane.setMessageType(JOptionPane.ERROR_MESSAGE);
 JDialog dialog = optionPane.createDialog(null, "Alert");
 dialog.getLayeredPane().getComponent(1).setFont(dialog.getFont().deriveFont(18f));//size = 18/whatever
 dialog.setModal(true);
 dialog.setVisible(true);
}

How to set an 'alert' or reminder message for end-user Acrobat X form.

Hi,
I'm trying to see if I can add an alert or reminder message for the end user who will be filling in a form that I'm creating from Acrobat Pro X.
Does it require a script if so, could anyone share one that is already exists?
If it doesn't need a script, how can I set that up?
What I want to do, is to remind end-user to fill in Numbers Only and not text. I have already set my properties for numbers only and provided an example. But, In-case end users did not understand, I'd like to have a message for them to say that they must type in number and not text.
Currently, with the limitation I've made, they couldn't type in any letters but, they might be frustrated and not fill in anything!
Please help!
Thanks,

Thank you for the code.
Is it correct to put that code under VALIDATE > run custome validate script, within the Properties box?
Because I tried it, and it worked only AFTER I typed a number onto the field.
Since my goal is to have the alert BEFORE, so if someone typed in a text, they should see the alert and correct themselves to type in a number instead.
Please clarify.
Thanks!

How to set plain-text for outgoing messages?

I just upgraded from a Pre "minus" to a Pre 2 with WebOS 2.1 . I now have mail recipients complaining that my messages are in HTML. How to I revert to plain-text for sending messages?
Post relates to: Pre p100eww (Sprint)

Hi jason ,
For setting Heder text for your ALV table
ip_confing type ref to CL_SALV_WD_CONFIG_TABLE.
"set alv table header
ip_config->if_salv_wd_table_settings~r_header->set_text( 'Test ALV Header functionality' ).
first you have to hide the DDIC text and then try to set your own text .
"modify columns
LOOP AT lt_columns INTO ls_column.
    lr_column = ls_column-r_column.
    CASE ls_column-id.
      WHEN 'MANDT'.
        "hide this field
        lr_column->set_visible( cl_wd_abstr_table_column=>e_visible-none ).
       WHEN 'SEQNR'.
        "set header to different string
        lr_column->r_header->set_ddic_binding_field( if_salv_wd_c_column_settings=>ddic_bind_none )." use this line to hide ddic text
        lr_column->r_header->set_text( 'Position' ).
    endcase.
endloop.
Regards
Chinnaiya P

How to set email so it shows messages i sent?

In my mac email inbox I can see the responses from my recipients but not the messages i just sent to them. I can only read my response once they have responded in the email thread. How can I get it so it lists my sent email too?

Welcome to Apple Support Communities.
These screen shots are from Mail.app version 4.6 (1085) on OS X 10.6.8.
Click an image to enlarge it to full size.
There should be a 'Sent' tab in the far left column of your Mail app under the heading 'MAILBOXES'
Move the cursor to the 'Sent' line (the one with the paper airplane icon)
Click on the 'play' triangle so it faces downward to reveal any and all email accounts you have set up in Mail.
(I have intentionally obscured some mailbox and message details in this image.)
Click on any one of the mail accounts listed under 'Sent' to see emails you've sent, as shown for the iCloud account below. (I have intentionally obscured some mailbox and message details in this image.)

How To Set Parameters in a SOAP-Message for QUERY_VIEW_DATA Web Service

Hi all,
I want to use the QUERY_VIEW_DATA Web Service to get data from BI through an existing BEx-query.
How can I set a navigation status as it is stated in the SAP documentation [Web Service for Accessing Query Data|http://help.sap.com/saphelp_nw04/helpdata/en/d8/3bfc3f8fc2c542e10000000a1550b0/frameset.htm]?
I am able to set filter values but setting any parameter with the name 'CMD' has no effect to the response.
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:urn="urn:sap-com:document:sap:soap:functions:mc-style">
<soapenv:Header/>
<soapenv:Body>
 <urn:GetQueryViewData>
 <Parameter>
 
 <item>
 <Name>CMD</Name>
 <Value>SWITCH_AXIS</Value>
 </item>
 
 <item>
 <Name>FILTER_IOBJNM</Name>
 <Value>0COMP_CODE</Value>
 </item>
 <item>
 <Name>FILTER_VALUE</Name>
 <Value>4020</Value>
 </item>
 </Parameter>
 <Query>Z_MYQUERY</Query>
 </urn:GetQueryViewData>
</soapenv:Body>
</soapenv:Envelope>
We use SAP NetWeaver 7.0 EHP1. The documentation mentioned above belongs to NetWeaver 2004s and I can't find it in the docu for 7.0. Does that mean the QUERY_VIEW_DATA is deprecated?
Thanks for your help!
Best regards
Heiko Braeske

Dear Heiko,
did you solve this problem?
We are facing the same problem. Every parameter that requries "cmd" does not work. I guess we don´t use this paramter the right way.
Best, Chris

How to set user ID in JMS message

I am looking for ways to set the user ID in a JMS message over MQ series. I have looked at various way of doing it including:
1) setting the appropriate environment variable in MQEnvironment
2) setting provider specific properties (of the format "JMS_IBM_xxxx")
3) in desperation, setting any likely looking property, e.g. "JMSXUserId"
None of these work, consequently the default user ID "mqm" is propagated. Rather than getting an error message back (with, I think, a 2059 code) when host authentication fails, I simply get nothing back.
I'd be grateful for any suggestions
Hugh Ferguson

3) in desperation, setting any likely looking
property, e.g. "JMSXUserId"I believe these properties are case-sensitive. We don't set the user id property in our JMS messages, but I can tell you that when we receive messages from apps on our mainframe host (which do not use JMS - they use the COBOL api), the user id is in a property called UserID (note that "ID" is capitalized). In raw form, it's JMSXUserID.
Hope this helps,
-Scott

How to set error message inside the loop...module pool

Dear all,
     Am creating Table Control without wizard. In that i am looping the values, that is, Once if i entered 5 digit values means, 12345-08... the values should be stored in z-table like this 12345,12346,12347,12348 . That is 5-8 it as to update in z table. for this i createdloop at itab and inside that i written a code to count the value and all. and also its clearly updating the value in ztable too. now i want to know, if once again i entered the same value means, like 12345-08.. it as to show error messge.I dont know how to set the condition with error message inside the single loop .... Its all comes under module pool program.
Thanks,
Santhosh.R

If i understood your doubt, here goes the answer.
LOOP AT itab INTO wa_itab. " This is your loop
l_tabix = sy-tabix. "l_tabix receives the line of the loop
READ TABLE itab WITH KEY itab = wa_itab. "itab is the same tab of your loop
IF sy-subrc EQ 0 AND l_tabix NE sy-tabix.    "Here the sy tabix have the value of the read table.
*     Here you do your error treatment.
ENDIF.
ENDLOOP.
Explanation: When you are looping your internal table, you use a READ TABLE to see the already recorded registers. If the read table finds one register (sy-subrc EQ 0) and the this register is not the one of the current line (l_tabix NE sy-tabix). It means you have a duplicated register.
Maybe there is someway easier to do this, but this is what i thought now.
I hope this was your doubt hehe.
Thales Schmidt

How to set the parameter of xi header in server proxy

Hi,
Does anyone have idea, how to set ref_to_message_id of a client proxy in the server proxy? My problem is, I send a message to a server proxy. The server proxy receives the message, retrieves the message id and tries to set the ref_to_message_id of the message, which will be sent to a client proxy, with its message id. I only find some useful functions to get these information of client proxy and server proxy like message_id etc. in runtime. But I did not find the "set" function to set these parameters. Maybe someone can tell me at first, if it is possible to set such parameters in runtime in server proxy.
Can anyone help?
regard
hu

Hi Chilla,
what I want is to monitor the related message bundle easily. In my server proxy, many different client proxies are called and messages are transfered. So under the SXMB_MONI I will find many message exchanges for one server proxy call. Because the server proxy is called so often, I cannot distinguish under the SXMB_MONI, which message exchanges are caused by which server proxy call.
So I have an idea. If I can set the ref_to_message_id of the messages for the client proxy calls with the message id of the server proxy call, then I can at first select the message of the server proxy call and find the messages for the related client proxy calls easily using the button "referencing message". The message id of the server proxy call can be retrieved. So my problem is now, how to set the ref_to_message_id of the messages for the client proxy calls with this messag id in the server proxy.
Of cource, if anyone has better idea, how to resolve the situation in another way without setting the ref_to_message_id, pleases inform me.
regards
Bin

How do I set the mailhost attribute in Messaging Server 3.5?

Intent of the hostname aliases feature: 
In Messaging Server 3.5, the hostname aliases feature is designed to facilitate migrating and co-hosting. For
instance, if you set up all of your sales and marketing users on one Messaging Server, but suspect that you'll
want to split those groups in the future, you can give the sales users the mailhost value sales.company.com and
the marketing users the mailhost value mktg.company.com. This feature can also be used for fast failover if
you want to be able to move a group of users quickly from one Messaging Server to another.

How to use hostname aliases and how to set mailhost and MessageHostName settings: 
Each user's mailhost attribute can have only one value. All users on a single Messaging Server do not need to
have the same mailhost value in the LDAP directory. The user's mailhost value should match one of the
MessageHostName attribute values in netscape.mail.conf. (On Unix, the path to this file is
/etc/netscape.mail.conf. Windows NT users must use Notepad to create this file in
server-root\bin\mail\Server\etc, where server-root is the base directory where your SuiteSpot servers are
installed.)

With Messaging Server 3.5 and later, MessageHostName can have multiple values. Think of hostnames as
colors. Each mail account in the LDAP server has a single color. Each Messaging Server has one or more
colors. A Messaging Server will check an LDAP account's color (mailhost) against its own color(s)
(MessageHostName), and if they match, the server considers the account to be local. 
For example: 
MessageHostName=red.company.com,green.company.com,blue.company.com
 where original-host-name is the machine's real name. This entry must come first as the server uses the first
entry to generate machine specific postmaster forms. The subsequent host names can be any values that you
wish separated by commas that are inside the brackets. Do not place spaces anywhere on the line.

In this example, if the mailhost setting for the user is set for either red.company.com or green.company.com, or
blue.company.com, the server will consider the user to be local. (Hostname aliases must also be configured in
DNS. Please see the DNS section at the end of this technote.) No other Messaging Server should list either
red.company.com or green.company.com or blue.company.com in the MessageHostName field. Mail could
not be delivered properly if either red.company.com or green.company.com or blue.company.com were listed
in any other server's MessageHostName field. A user with a mailhost setting of violet.company.com would not
be considered local to this machine.

Although it is possible with Messaging Server 3.52 to list more than 16 different host names in the
MessageHostName field, it is not recommended because increasing the number of hostnames in this field beyond
16 will have a negative impact on performance. This feature is intended to provide fast failover and/or
migration of users. If users need to be divided up into many smaller groups, the use of some other LDAP
attribute is recommended.

In Messaging Server 3.0, you can associate a server with only one host name. Consequently, all mail accounts
on a given server must have the same mailhost value in the LDAP directory. This should be the name of the
server, i.e. host.company.com

</A>A note about DNS
Hostname aliases must be configured in DNS. This is done with a CNAME record. For example:
A 128.101.101.101
CNAME

Additional MX records are not required to use hostname aliases.

If you aren't sure about how to configure your DNS records, consult the book DNS and Bind by Paul Albitz and
Cricket Liu.

You can find the connection settings in Tools > Options > Advanced : Network : Connection
See "Firefox connection settings":
*[[Firefox cannot load websites but other programs can]]

TS2755 Hi all, I bought one iphone and 3 ipads, i set up all on one apple ID. Now i have a problem when using messages: when sending message from one device it appears again on screen from the other 3 devices. I need help of how to set up messages on each

Hi all, I bought one iphone and 3 ipads, i set up all on one apple ID. Now i have a problem when using messages: when sending message from one device it appears again on screen from the other 3 devices. I need help on how to set up messages on each device separately and to start using messages app on each device independently. Thanks

search google for "iphone remove picture from contact"

How to set the message in the status bar...

hai,
how to set the message in the status bar...
let us say "inserted data successfully, or opening page followed by the link clicked on the screen....."
kindly help me out

sunil,
do not use advise by Ashutosh with WebDynpro.
Instead of placing message into browser status bar (and browser is not the only WD UI agent), use IWDMessageManager API to post messages of such kind:
wdComponentAPI.getMessageManager().reportSucces("Record inserted");
VS

How do I enlarge the font in messages received and sent? I have it set at "13", but it is very, very small on my screen. I can't seem to change the appearance of the tool bar even when I try to "customize".

How do I enlarge the font in messages received and sent? I have the font set at "13", but the appearance on my screen is very, very small. When I try to "customize the toolbar" to look like the tool bar above this message, I am unable to do so. Please advise. Thank you.

Thanks MartinR, yes the Toggle bars can be adjusted so that I can see all the tracks - just in the smallest setting - however this also creates a huge area of grey which serves no other purpose than to "use up screen space". If this is deliberate then there is nothing one can do - since presumably the additional profit made on screen sales is more important to Apple, than the combined annoyance to those working on a 13" laptop. Of course a 15" screen or even 17" screen may make this wastage less obvious. Please indicate that this is all incorrect and explain why it is important to have space waiting "for additional tracks", even if I have no intention of making additional tracks. If that is the answer then perhaps additional space to the left and right of the timeline would be useful in case I wish to make a 30 minute film, so that it could be placed there without having to drag anything. It may be that I am expecting software than can be tailor adjusted, each parameter to the desired level as in professional items and since this is a cheap consumer program it is not possible.
I bought Final Cut Pro for a lot of money (when it first appeared it was thousands and not just hundreds) but never used it since it was too complicated and tedious, but maybe there, this problem of screen wastage does not occurr, perhaps someone can advise! I could go back and reinstall it, but it was made for 10.2.8 and not 10.6.8 so it would not run on this macbook. I recently bought an old 15" TitaniumPowerbook (from 2005) and despite running at 1MHz the response time on it is "instantaneous" - amazing to not have the almost half second delay on many commands - graphics appear nearly immediately (just 5 milliseconds delay) and this makes working so much more enjoyable, not having the (350ms) stutter of 10.6.8 which we all get used to after our initial disappointment.
Thanks for your help!

How to set VL 626 to warming message

Similar Messages

Maybe you are looking for