How to setup a static multicast ARP entry with Cisco SF300-08?

We're running a cluster in multicast mode as a  loadbalancer.
We have Cisco SF300-08 and when we adding a static ARP entry results in an error message telling the user that the hardware address needs to be a valid  unicast MAC address.
So how to setup a static multicast in Cisco SF300 or maybe someone know other solution to setup multicastes mode in Cisco SF300.

Hi, Tom!
We have two watchguard xtm505(cluster active-active) in our network. Watchguard interfaces have one ip and one mac adresses. IP 192.168.111.1(Unicast) and MAC 01:00:5e:02:02:03(multicast).  Cisco SF300 is router to outside networks(to internet). Cisco IP adresss is 192.168.111.254. There are another some hosts in this network.
Ping from hosts to 192.168.111.254 works well. Ping from hosts to 192.168.111.1 works well too.  But there is no ping from watchguard cluster(192.168.111.1) to Cisco(192.168.111.254). And there is no routing to internet
This is well-known situation. We need to do following(example for cisco 3750):
1.    Start the Cisco 3750 command line interface.
2.    Add a static ARP entry for the multicast MAC address of the FireCluster interface.
Type this command:
arp arpa
For this example, type:
arp 192.168.111.1 01:00:5e:02:02:03 arpa
3.    Add an entry to the MAC address table.
Type this command:
mac-address-table static vlan interface <#>
For this example, type:
mac-address-table static 01:00:5e:02:02:03 vlan 1 interface gi1/0/11
But we can't add arp entry on Cisco SF300. CLI tells us "MAC address illegal"!
We tried enable igmp snooping, but is not helps.
Could you tell more detailed about MAC groups?

Similar Messages

  • How to setup a static IP for a wireless printer

    This problem has been ongoing for several versions of OS X and the last five printers I've had and I'm finally over messing with it.  For some reson, when using a wireless printer with OS X this is a repetetive problem, and I think if I configured the printer to a static IP address instead of using DHCP, it might work better.  At least once a week, if not more often, I'll print something and get the ubiquitous Dock error of "Printer is not connected".  The printer is still in Preferences, but if I delete it, then it doesn't show up as it should for selection.
    The only way to fix this is reboot, and then the printer shows up again in Preferences.  I select it and all is well again...until a few days pass and the same thing happens again.  Using an HP LaserJet P1102w, still a current model, but it doesn't matter which printer I use.  I also have an Epson Artisan 725 and the same thing happens with it about once a week.  Also, this happens from both my Mac and my wife's Mac, so it's not an issue with just my machine.
    I've searched for documentation on how to setup a static IP address for a wireless printer with the Airport Extreme, but all I find are tutorials on how to do it with an ethernet hard-wired printer.  Any help would be greatly appreciated.

    You could set up your router to do manual assignment of IP address instead of using DHCP, but that is a PITA, because then you'd have to manually set up IP for all your devices.
    If you have AirPOrt Extreme, you could do this:
    In your Apple TV, go to the Settings >> About and write down the MAC address of your ATV
    Start up the AiPort Admin Utility
    Go to Network tab
    click + in the DHCP reservations
    Choose an IP you want for your ATV & Enter the MAC address
    From now on, this IP address will be reserved to the MAC address and only your ATV will be able to get it, no other device will.
    It is not a static IP in a true sense, but behaves just like one.
    Works great for me...
    If you don't have a AP Extreme, I'm sure other routers will allow you do reservations too.

  • How to setup PCG Flow Rule Process flow with Business Event subscription

    Hi,
    How to setup PCG Flow Rule Process flow with Business Event subscription type?
    When should Business Events be used?
    The latest user guide does not provide ay information on this functionality of Flow rules.
    Thanks

    You should find it's usage noted in the new PCG user guide on page 3-26 under the heading "Configuring Workflow/Event Rules". This way you can have a Flow Rule call a business event component or a workflow. This would be kicked off within a process flow as one of the steps.
    I hope that helps.

  • HT201269 how do I merge multiple duplicate contact entries with cell home and e-mail entries

    how do I merge multiple duplicate contact entries with cell home and e-mail entries?

    Try linking cards:
    Open any contact you want to merge, tap on Edit and look at the bottom part of it.  You'll find 'Link Cards' and from there you may select the contact you want to link with the one you're looking at. So if you have:
    Contact 1: John A (job)
    Contact 2:  Business Name (who is also John A but you saved it as a different contact)
    Contact 3: Something else that's also John A
    You can link all three cards into one.  If you choose to, you may unlink them at any time, just tap Edit and then the red circle. Your contacts won't be deleted, but they won't appear under the same ID anymore.

  • How To Setup A Local Exchange Server Integrated With Office365 For A Single Mailbox

    Hello,
    We recently migrated to Office365 but had an issue since we need more than 16 simultaneous connections to a single mailbox. Because of this, we need to deploy a local Exchange Server that will be used to host a single mailbox that requires up to 500 simultaneous
    connections for a Contact Center application. I'm looking for information on how to setup the local Exchange Server to basically create a local instance of a mailbox hosted on Office 365. So we can have our application open the numerous simultaneous connections
    to our local server which will then connection to Office 365 to send/receive email through the mailbox hosted on Office365.
    Please let me know if you have any information or resources you can direct me toward.
    Thanks,
    Chris

    Hi,
    To deploy local Exchange server integrated with Office 365, we can depend on Exchange Server Deployment Assistant:
    http://technet.microsoft.com/en-us/exdeploy2013/Checklist?state=2419-W-AAAAAAAAQAAAAAEAAAAAAAA%7e
    Please note that there may be 9646 error if there are many simultaneous connections at the same time.
    Thanks,
    Angela Shi
    TechNet Community Support

  • How to setup a static ip address and DNS on airport extreme using the iOS Airport Utility?

    I am at a location that only has wired ethernet.  The ethernet connection has a specific  Static IP address, subnet, gateway, and DNS setting.  I cannot seem to find how to enter DNS settings using the Apple Utility on an iPad. HELP!!!

    First, I am assuming that you are trying to administer your AirPort base station for a static IP address using the iOS version of the AirPort Utility ... correct?
    If so, then to do so:
    Start the AirPort Utility app on the iPad
    Select your base station.
    Select Edit
    Select Internet Connection
    Select Static
    Enter the appropriate IP address information
    Select Done
    Sorry, it does not appear that direct input for DNS IP addresses is an available option with this version of the iOS AirPort Utility app. Not sure why this was not included.

  • How to setup the email service & report template with BO XI3

    Hi,
    I'm new to BOBJ. Can anyone share your experience and guidelines on setting up the email server? I tried to do it in CMC, yet it doesn't works.
    My requirement is that :
    1. I need to send the WebI report to a group of users in a specific datetime(scheduler). Can BO XI3 works in this way?If yes,then how?
    2. Is there a way to configure the WebI report with Company Logo and Company Name? Maybe we can called it as a report template, so the Company Logo and Company Name will appear whenever the user create any new report. How should I handle this?
    Please advise.
    Much appreciation for your help!
    Best regards,
    Tee

    1. There are a few steps to set up an email server. The best guide to this is the BOE administrators guide, which you can access at help.sap.com or try this link http://help.sap.com/businessobject/product_guides/boexir31/en/xi3-1_bip_admin_en.pdf
    You will want to go the section on Email destination properties.
    Basically you will need the details of your SMTP server, and enter details for the appropriate job server(s).
    2. To setup a Webi template you create a report off of a Universe, format it so it displays your company logo in your header (look at the properties tab), and hard-code your company name, or use a dimension object with your company name in the query.
    Do your formatting on this simple report how you want it, i.e. fonts, borders, shading, page margins etc. Then in your query strip out all query objects apart from at least one, which is common between all your universes (i..e you could define a dummy variable like Today's date in all your universes).
    Save this report as 'Template Report' or similar, and ask all your users to use that as the starting point. So they would edit the template report, re-point the report to whatever universe they wanted then save it as a different name. Make sure they don't overwrite the template report.
    Good luck!

  • How to setup multiple Exchange accounts in Mail with the same username/password

    Okay didn't see a place to ask a Mail question so I am placing this here.
    I work for a helpdesk that requires me to monitor 4 different email accounts throughout the day. They are all Exchange accounts. The first one setups just fine but when I go to setup the others I get a message that states that the username and password are in use for the other account. Is there any way to setup multiple Exchange account when using the same LDAP creds for all the accounts?

    Csound1,
    I need to add a second Exchange account to my MBP using Mail.  Both accounts are with Rackspace, but each email address is unique (i.e., two different domain names).  When I use Preferences to attempt to add the second account, it recognizes the new credentials, finds the server and autopopulates the necessary address information.  But, as soon as I click "Done" after setting which functions are active on the account (mail, cal, contacts, etc.), the screen shows only my original Exchange account.  The new one is not added, yet there is no error message saying that it can't be added.  Any idea what is going on?  Shouldn't Mail be able to have multiple Exchange accounts, even if they are hosted via the same Rackspace server (in this case: connect.emailsrvr.com)?
    Many thanks,
    Wally
    MBPR with Mavericks, Exchange 2012, Mac Mail

  • How do I use firefox to complete entries with my info such as name, email etc without having to type everything out myself?

    When I am entering my info for contests or ordering, I don't want to have to type everything. How do I set it so Firefox will remember this and fill it in for me?

    Install one of these Add-ons:
    *https://addons.mozilla.org/en-US/firefox/addon/autofill-forms
    *https://addons.mozilla.org/en-US/firefox/addon/autofill-262804
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
    Not related to your question, but...
    You may need to update some plug-ins. Check your plug-ins and update as necessary:
    *Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
    *Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
    *Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
    *Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
    *'''''Next Generation Java Plug-in for Mozilla browsers''''': [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

  • How to Setup a BT Yahoo email account with Outlook...

    On Add Account Auto Account Setup Complete the information that is being asked for, when completed select Manual setup or additional server types, then click Next
    On Add Account POP and IMAP Account Settings.
    Complete user information that is being asked for, make sure that POP3 is selected in Account Type.
    Under Logon Information User Name is your eMail address not your name as it used to be, complete this section with your Password. In The Deliver new messages to either use New Outlook Data File, if you have an Existing Outlook Data File select this option and browse to find its location on your Computer. When completed press Next.
    In Internet E-mail settings -Outgoing Server tick the box against My outgoing server (STMP) requires authentication. Use the Test the account Settings and that's it DONE
    If you have any problems let me know and i will eMail you some screen shots

    Peer-to-peer guidance like this can be very useful, but I can't help thinking why would anyone wish to set up a new email account with BTYahoo. (Or even Yahoo.) Even if it were possible, which I doubt, given that BT is quitting Yahoo, and BTYahoo is dying, who on earth would wish to create the possibility that a brand new email address will get embroiled in the email migration and SMTP problems that seem to be building?

  • How to setup Autodiscovery for .local internal domains with Exchange 2013

    Hi,
    I need to know about how i set autodiscovery in local domain.I have local domain eg
    abc.local and domin which i received the emails externally is  xyz.com.
    I have deployed Exchange2013 recently with same above scenario inbound and outbound mails are working fine using OWA.But outlook clients cannot connect to Exchange server with in the LAN. 
    Please help me out how set auto discovery in local domain and another help i need how i configure the self sign certificate in this scenario.   

    You cannot use a self signed cert for RPC/HTTP connections (which is how the Outlook client is connecting exchange2013). Please check this http://social.technet.microsoft.com/Forums/exchange/en-US/aed4ede9-57c3-44c3-90b4-bdfb3a7f017d/exchange-2013-self-signed-certs-and-outlook-client-access?forum=exchangesvrgeneral 
    But you can use a certificate from an internal CA which you can install in your network issue a certificate for exchange. Please check this it will help you manage internal certificates for a PC and for a domain.  http://technet.microsoft.com/en-us/library/cc754841.aspx
    You dont need to configure autodiscover for internal domain added clients. If you have clients on the network which are not members of the domain, using Exchange, this could be Windows, MACs or mobile devices, then you should ensure that autodiscover.example.com
    resolves internally to the Exchange server via a split DNS system. http://exchange.sembee.mobi/network/split-dns.asp
    Please configure your external and internal URLs as well
    http://www.mustbegeek.com/configure-external-and-internal-url-in-exchange-2013/
    I recommend to buy a 3rd party certificate as it may create issue for external clients e.g.Outlook anywhere
    Thanks, MAS
    Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

  • How to setup 24 hours guest network access with Time Capsule 4th gen. ?

    Hello,
    I just bought a Time Capsule 2TB and I cannot find the setting to limit the network access to 24 hours.
    I updated the firmware and Airport Utility to the latest version and it seems that most of help on this setting I fond on internat are based on previous version.
    By example I do not have a "Manual setting" in the "Base Station" menu like described in the manual.
    Can someone help on this ?
    Thank you and Regards,
    Sebastien

    Suggest that you download and install AirPort Utility 5.6 for Mac OS X Lion. It will have the settings that you are looking for.
    You can keep both AirPort Utility 5.6 and 6.0 on your Mac and use the one that you need.

  • How to setup EWA for non-ABAP system with SM 4.0 ?

    Hi, we are running SM 4.0 with the support-stack 06. I have set-up a solution for monitoring which includes a NW04 WebAS 6.40 Java only system. Has anyone set-up EWA reports for this type of non_ABAP system who can advise of the steps necessary for this ?
    It seems like you need to define RFC destinations for where the monitored system data should be collected from , but there doesn't appear to be anywhere to do this for non-ABAP systems ?
    I have looked at Note 738676 - Service Data Download for Non-ABAP Components but it hasn't helped and it seems to be SDCC specific, rather than SDCCN.
    Thanks.

    Hi Andrew,
    we are just developing it, at the moment you have the following option, your java system has to send by ccms agends its data to an ABAP 640 system or higher, there you can see its alerts in ccms, then you have to make both system available in SMSY. Then important you have to assign the java system as a system component, then we collect also the java data and shows them in the EWA of the ABAP system. There for go to the main instance tab and set a java main instance to relevant and assign your java system.
    This is the old, available standard solution. At the moment we develop it also for java stand alone.
    I think it will be available with the new ST-SER in autumn
    Regards,
    uDo

  • How to setup new notebook from HP laptop with bad hard drive

    Got kids a new Hp laptop in June.  The hard drive has been getting progressively louder and is obviously about to go, with a blue screen error forcing a roll back of the computer.  I have done a full backup to an external hard drive and I am returning this for a replacement.  Should I make a recovery disc and reinstall from the disc when I get the new laptop, or should I just plug in the external hard drive and transfer the files over?  A guy at work says using the recovery disc is the way to go, because it would reinstall Norton and all the other programs we have installed., but I thought the external hard drive backup was supposed to be the way to do this
    This question was solved.
    View Solution.

    Not sure I understand the question. "Should I make a recovery disc and reinstall from the disc when I get the new laptop, or should I just plug in the external hard drive and transfer the files over?" Usually HP replaces only the hdd.
    If you are receiving a new hdd to put it the laptop, yes you need to burn the Recovery Disks to reinstall Windows & original software on it. You can then use your backup to restore files.
    IF the full backup you are referring to is a complete System Image, it can be used to restore Windows, programs and all files,etc on the new hdd. You do need to also burn the Repair CD to boot from and restore the System Image on the new hdd.(I would still burn a Recovery DVD set to have as a fallback)
    If you are receiving an entire laptop replacement it will have everything installed on it. You will just have to restore your personal files from the backup
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • How to setup Word 2010 Workgroup Templates location with Office 2010 Customization Tool

    I can't seem to find it under Modify Users Settings, Microsoft Word 2010, Word Options, Advanced, and File Locations.
    Is it configured somewhere else?

    Hi,
    As we know, the workgroup templates file location are controlled by the following registry key:
    HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Common\General\[SharedTemplates]
    The workgroup templates location will change after you change the string value of the registry key. We could deploy it via OCT directly.
    The link below may help:
    http://technet.microsoft.com/en-us/library/cc179097(v=office.14).aspx#Add_registry_entries
    Best Regards

Maybe you are looking for