How to show cfm, html, js, css, and browser tab in coldfusion builder 3?

On Coldfusion Builder 2, I see these tabs are available when I create a new page, but not on Coldfusion Builder 3.
What should I do to show them on CFB 3?

Builder 3 does not seem to offer those sub-tabs in its toolbar, but if you open each of those kinds of files, you’ll find that the top toolbar (where they appeared) shows many of the same icons for each of those type of files as was previously listed in those sub-tabs.
I realize that isn’t as helpful if you are opening a single CFM or HTML file which happens to have also HTML, CSS, and JS code in it. You won’t see the icons for that other kind of code, even when you move to such code.
FWIW, note that CFB 1 and 2 had previously relied upon an underlying 3rd party tool called Aptana, for most such HTML, CSS, and JS-specific functionality. In CFB3 that product was dropped and the CFB team tried to recreate much of its functionality. This (the tabs for other code within a single file extension) may be something they didn’t think was used often, or maybe there was a challenge in doing so.
Even so, do note also that there is still support for CSS and JS (and HTML) within a CFM page, in terms of CFB’s features like code completion, code assist, outline view, etc.
Still, I realize that some of the “wrap”-oriented tools in that old toolbar aren’t accessible any other way, so you may want to file a feature request (or bug report, however you may want to cast it) at bugbase.adobe.com.
Hope that’s helpful.
/charlie

Similar Messages

How to show an html page using JEditorPane in applet.

I have never use jeditorpane with applet so i dont know how to show a html page.if you have some code or any example then please posted that.Thanks

public class MyApplet extends JApplet{
    private JTextPane textPane = null;
    public void init(){
    HTMLEditorKit editorKit = new HTMLEditorKit();
    HTMLDocument htmlDoc   = (HTMLDocument)editorKit.createDefaultDocument();
    textPane = new JTextPane();
    textPane.setEditable(false);
    textPane.setEditorKit(editorKit);
    textPane.setContentType("text/html");
    textPane.setDocument(htmlDoc);
    Container c = getContentPane();
    c.add(new JScrollPane(textPane),    BorderLayout.CENTER);
    c.add(buttonPanel,                  BorderLayout.SOUTH);
    c.add(Box.createVerticalStrut(5),   BorderLayout.NORTH);
    c.add(Box.createHorizontalStrut(5), BorderLayout.EAST);
    c.add(Box.createHorizontalStrut(5), BorderLayout.WEST);
    public void setHtml(String html){
        // you should check the textpane's document to detrmine if there
        // is already text in there..if so, then clear the textpane text and then
        // set the new html...Note: JTextPane only show basic Html ..
        // not like a full blown browser
        textPane.setTextt(html);
        textPane.setCaretPosition(0);
}

How to show Html5 created in eclipse and link to any cloud application like c4C through HCP

Hi Experts,
How to show Html5 created in eclipse and link to any cloud application like C4C through HCP
Regards,
Vijay.

Your question is very unclear, please elaborate what you are trying to achieve.
Also, did you click on the Alert Moderator link? This is for reporting abusive content, spam, points cheating, etc. It should not be used w/o a reason (one of the above) as what it does is putting the content in the Moderators' queue and hiding it from public view.

How to add my html title tag and html meta name and meta keywords

how to add my html title tag and html meta name and meta keywords in iweb 09

Like you will see on Roddy's page iWeb SEO Tool will do the job very easily:
Click to view full size
Click to view full size
It remembers what tags went to which pages so they are easily reapplied when you have to republish.
OT

I really need help on reseting my security questions i tried sending in my rescue email but the rescue email is not showing up on the password and security tab and i'm positive i don't know the answers this is really getting annoying _

i really need help on reseting my security questions i tried sending in my rescue email but the rescue email is not showing up on the password and security tab and i'm positive i don't know the answers this is really getting annoying

If your rescue email is not working and you cannot remember even one answer, then you only have one option - call Apple.
http://support.apple.com/kb/HT5665

Filting html tags, css, and javascript with regex

hi everyone,
im writing a small application where a user types in a url, and the text of the webpage is displayed in a text area.
ive got it to work, however it takes some time, and also alot of content i dont want is displayed - tags, scripts and sometimes css.
initally i filtered out the html tags with a regular expression, but i still get alot of unwanted content.
im not a confident java programmer, and the idea of parsing html, css and javascript is the scariest idea ever to me, so my next idea is to keep only everything between the <body> tags - everything above and below it is deleted - hopefully that should leave me only with the visible content on the site.
ive messed around with regular expressions but i cant get it to work, can anyone help out?
thanks alot,
Torre

Darryl.Burke wrote:
I tried out the regexes I posted on the source of a forum page, which is not valid html (contains two each opening and closing body tags). With a bit of trial and error I was able to remove everything upto the first, and not the second, opening tag by using a reluctant qualifier, ^.*?, but couldn't for the life of me achieve removal of only the last closing tag, leaving the other, invalid one intact. How would you do that?Regexes always try to match the first occurrence of whatever they're looking for (the sentinel), and there's no way to change that behavior (but it would be handy if you could). What you have to do instead is make sure the rest of the regex can't match the sentinel. For that you need lookahead, and the simplest way to use it is to scan the rest of the text looking for the sentinel and, if it doesn't find one, go ahead and gobble up the remaining text: "(?is)</body>(?!.*</body).*$" However, if there are many occurrences of the sentinel, you could take a serious performance hit. Here's a much more efficient way: "(?is)</body>(?:[^<]++|<(?!/body>))*+$" After matching the sentinel, this regex gobbles up anything that's not the first character of the sentinel, or the first character as long as it isn't followed by the remaining characters of the sentinel. The advantages of this regex are that it never has to backtrack, and the lookahead is only applied when it's necessary, where the first regex applies it every time.

How to show content from microsoft word and pdf on a page

Hi,
I have a microsoft word file stored in content repository and I want to show it in web page. When I drag and drop it using content presenter it shows file as a link with some extra details like created by, last modified by etc. I want content to appear in UI page itself. Content of document should get converted to html at runtime and then appear in UI. Is it possible?
Thanks
Sanjeev

Sanjeev,
I see you have as similar requirement you posted in the thread here :
Skipping ucm login form when showing content on webcenter application.
InBound Refinery (IBR) would be the easiest way to accomplish this though.
Once you have IBR installed and configured (you need to pick what formats need to be converted in the refinery, and in your case, choose MS Office formats),
You can use the document viewer taskflow to render PDF versions of your Word/Excel or PDF documents on a webcenter page. There is little to no setup required for this, beyond configuring IBR (but configuring IBR is fairly involved) and selecting what MIME types you want IBR to process.
Another thing to watch out for if you are using Spaces is, make sure you set the context root for UCM properly though EnterpriseManger.
Dynamic Converter can also be used to get similar results. You mention that you are using an Iframe, that means the client is making a request to UCM directly, and to avoid re-authenticating there, you should have SSO enabled. With Dynamic converter, you can use a URL of the form :
http:// +<host>:<port>+ / +<context_root>+ /idcplg?IdcService=GET_DYNAMIC_CONVERSION&dDocName= +<docID>+ &RevisionSelectionMethod=LatestReleased
To get an HTML rendition of that document.
Hope it helps !
-Jeevan
Edited by: Jeevan Joseph on May 14, 2012 3:07 PM
Edited by: Jeevan Joseph on May 14, 2012 3:08 PM

How to show an HTML file (more then 1MB size) in JEditorPane

I an trying to show an HTML file (more then 1 MB size ) in JEditorPane
but getiing OutOfMemory error.
if i try the same for size less then 1 MB(i tried till 850KB) then it will work fine.
I am using setPage() method of JEditorPane.
please provide solution .

I meet the same question, and even worse.
I created a html file with frameset, when i point to the link which is an html file larger than 500kb . it fails. and some error "infinite loop in formatting" is thrown
in javax. swing.text.FlowView. I read the code of this class, and can't tell what's the error of my application.
Can someone help and give some answer?

How to show a html page in a swing applet -- URGENT!!!

Hi All,
I'm trying to show a html page inside a swing applet... is it possible to do that?? if so is there any built-in classes available for that?? If anyone have some examples, plz help me with that....
Thanks,
Ragu

i havent tested.. but this should work. i am no expert on these either, just to give you an example.. :-)
JEditorPane ePane = new JEditorPane();
HTMLEditorKit html = new HTMLEditorKit();
ePane.setEditorKit(html);
HTMLDocument htmld = new HTMLDocument();
try{
URL url = new URL("http://hcs.harvard.edu/~undercon/");
InputStream ins = url.openStream();
ePane.setDocument(htmld);
html.read(ins,htmld, 0);
this.getContentPane().add(new JScrollPane(ePane),BorderLayout.CENTER);
catch(Exception e)
e.printStackTrace();
}

Item Master showing wrong Tax % in Purch. and Sales Tab

Hi
In Item Master Data Purchasing and Sales Tab the wrong Tax % value is shown. It shows the value valid from 1.1.2011 and not the value that is currently valid. In all other areas it does show and use the correct, at current date valid value.
2007A SP01 PL09
Known bug?
Thanks
Franz

Hi Gordon,
You might be right that it is 'a bit early' for the 2011 rates. However, because
- we got the official information about the raise next year
- B1 offers the possibility to enter the new values with a validity date in the future
- I am not 100% sure if it influences any 2011 predated document posted if the correct value for 2011 is not already present in the system
- and in the end just to prevent me from forgetting to change it at the year end - what's done is done
Franz

How to download blob image, inline to new browser tab or window

APEX V4.2.3
I have an interactive report with a blob download column which is set to inline. When I click on the "download" link the image appears automatically in same window as the APEX application. How do I download the image into a new browser tab? I need to squeeze 'target="_blank" ' somewhere but I don't know where as the link structure is hidden.
Here is the code for my download column in the Interactive Report.
select
decode(nvl(dbms_lob.getlength(BLOB_CONTENT),0),0,null,
'<img style="border: 4px solid #CCC; -moz-border-radius: 4px; -webkit-border-radius: 4px;" '||
'src="'||
apex_util.get_blob_file_src('P98_BLOB_CONTENT',image_id)||
'" height="100" width="100" alt="'||FILENAME||'" title="'||FILENAME||'" />')
as detail_img,
from "#OWNER#"."TIS_ATTACHMENTS"
thanks in advance
PaulP

I would suggest
SELECT ID, NAME,CASE WHEN NVL(dbms_lob.getlength(document),0) = 0
THEN NULL
ELSE CASE WHEN attach_mimetype like 'image%'
THEN '<img src="'||apex_util.get_blob_file_src('P4_DOCUMENT',id)||'" />'
ELSE
'<a target="_blank" href="'||apex_util.get_blob_file_src('P4_DOCUMENT',id)||'">Download</a>'
end
END new_img
FROM TEST_WITH_BLOB

How to show an HTML page in a new browser window

Hi Everyone,
I am trying to show a page generated by some servlet in a new browser window when the button is clicked on the applet. I can accomplish that by using AppletContext as in:
myApplet.getAppletContext().showDocument(servletUrl, "_blank");
The only problem with this is that I don't have any control over how the new browser window is displayed. Using JavaScript I can set size, hide toolbar and address bar, etc. But how can I hide address bar on a new browser window generated in this scenario?
I tried to call intermediate servlet from my applet which in turn generates a new window by writing out JavaScript code. This way I lose my previous page with the applet even though a new window is displayed the way I wanted but I want this new browser window to act as a pop-up box and my applet page stay on screen. Also, is there a way to send a POST request from an applet by using AppletContext.showDocument() method?
Any help will be greatly appreciated!
Thanks in advance,
Y.M.

Did you ever figure out a solution for this? I too would like to open a new browser window to act as a pop-up box and my applet page stay on screen. If anyone has any thoughts on how to do this, please post! thanks.

How to show statistics of main item and related items with less filter?

Hi experts,
Have any of you come thro' similar requirements before?
To show the statistics of a main item in different aspect in a document and show the comparison of this item in a particular aspect with other related items as inputted at prompt.
You can image that, for the comparison, if I build another query for the related items, there will be duplicated dimensions, which we aim to avoid as duplicated dimension confuse end users.
However, if i build the main items and related items in same query, for those reports of main item only, I need to add a report filter one by one!
Any one of you have better idea?
Thanks and Regards,
Cherry

You Should use Formatted Search in this case.
You must create and associate a query for your field.
click on the field you want items to be listed and press Shift + F2
catch the keydown event of this field and check pval.charpressed = 9 (tab key press)
then execute
SBO_Application.SendKeys("+")

How to show PL/SQL package output and fix below error(please help)

--PACKAGE SPECIFICATION AND BODY complied successfully but I can not see output some error are also there.. please help ;how to fix this problem
-- with code
CREATE OR REPLACE PACKAGE package_variables IS
-- Declare package components.
PROCEDURE set(value VARCHAR2);
FUNCTION get RETURN VARCHAR2;
END package_variables;
CREATE OR REPLACE PACKAGE BODY package_variables IS
-- Declare package scope variable.
variable VARCHAR2(20) := 'Initial Value';
-- Define function
FUNCTION get RETURN VARCHAR2 IS
BEGIN
RETURN variable;
END get;
-- Define procedure.
PROCEDURE set(value VARCHAR2) IS
BEGIN
variable := value;
END set;
END package_variables;
VARIABLE outcome VARCHAR2(20)
CALL package_variables.get() INTO :outcome;
SELECT :outcome AS outcome FROM dual;
EXECUTE package_variables.set('New Value');
CALL package_variables.get() INTO :outcome;
SELECT :outcome AS outcome FROM dual;
OUTPUT
PACKAGE package_variables Compiled.
PACKAGE BODY package_variables Compiled.
Error starting at line 2 in command:
CALL package_variables.get() INTO :outcome
Error report:
SQL Error: ORA-01008: not all variables bound
01008. 00000 - "not all variables bound"
*Cause:
*Action:
OUTCOME
1 rows selected
anonymous block completed
Error starting at line 2 in command:
CALL package_variables.get() INTO :outcome
Error report:
SQL Error: ORA-01008: not all variables bound
01008. 00000 - "not all variables bound"
*Cause:
*Action:
OUTCOME
1 rows selected
*/

EXECUTE package_variables.set('New Value');
CALL package_variables.get INTO :outcome;
SELECT :outcome AS outcome FROM dual;
OUTPUT
anonymous block completed
Error starting at line 2 in command:
CALL package_variables.get INTO :outcome
Error report:
SQL Error: ORA-06576: not a valid function or procedure name
06576. 00000 - "not a valid function or procedure name"
*Cause:    Could not find a function (if an INTO clause was present) or
a procedure (if the statement did not have an INTO clause) to
call.
*Action:   Change the statement to invoke a function or procedure
OUTCOME
1 rows selected

How to show display attributes like key and description in voyager

This question is on voyager connecting to SAP BI Query. I would like to show both key and description of the row member. It is mentioned in the guide that display attributes can be viewed and changed from the properties tab of the tab panel. But I didnt see any such option in properties tab.
Any solution for this?
Thanks
Raghu

It is a XI 3.0 version. I looked at Voyager user guide for XI 3.0 in page no 202. It is about Using Voyager with SAP
"Display attributes
Members have several string properties which are visible in Voyager:
u2022 Key
u2022 Short description
u2022 Medium description
u2022 Long description
u2022 Key and short description
u2022 Key and medium description
u2022 Key and long description
These string properties can be viewed and changed from the Properties tab
of the Tab panel.
Note: Key and text properties are concatenated into a single string, and are
therefore displayed in a single column or row caption field. They do not
appear as separate columns or rows."
Thank you very much.
Raghu

How to show cfm, html, js, css, and browser tab in coldfusion builder 3?

Similar Messages

Maybe you are looking for