How to show limited items based on a custom field

Is there a way to show only web app items based on the custom date field? For example, i want the module to only show web app item(s) whose "event date" is "today"....  ?? Help please!

There has to be a jQuery plugin that can help you do that... just search on Google, Stackoverflow, etc...
There's one that SimpleFlame wrote via Kiyuko but it's a premium offering:
http://kiyuco.com/tutorials/create-a-web-app-driven-event-calendar

Similar Messages

  • How to  show additional items in the same window using stacked canvas

    How to show additional items in the same window using stacked canvas.
    My content canvas has 14 items, and I have to include more.
    I want to know how I can use a stacked canvas to show these additional items in the same window, so that I can scroll through horzontally , as if all the items are on one canvas.

    Well, I intially navigate into my content canvas. At this stage the stacked canvas is not visible, then how should I navigate to an item on the stacked canvas to make it visible?

  • How to show all items in the reading list? I think this option has been removed in Safari Version 7.0.2

    How to show all items in the reading list? I think this option has been removed in Safari Version 7.0.2

    Thanks. That solved it. I had my doubts since I wasn't concerned about my lost bookmarks. I was concerned about the broken functionality. In any event, restoring from a backup solved both the functionality and the lost bookmarks. I appreciate the response!

  • How to show catalog items with Approval Status:Pending in a Content Search Webpart

    How to show catalog items with Approval Status:Pending in a Content Search Webpart using cross site publishing. Thanks in advance.

    I don't think you're going to be able to. Usually Approval Status is used in conjunction with Major/Minor versioning and while Approval Status is pending the item is usually a draft.
    As a result the search crawler should not be able to see the draft items as it would not have the necessary rights to do so. (Good practice ensures that the Search Crawler has only read access and is not an elevated account for this reason)
    Paul.
    Please ensure that you mark a question as Answered once you receive a satisfactory response. This helps people in future when searching and helps prevent the same questions being asked multiple times.

  • How to Show ActionScript Graphics based Spinner on Flex or mobile application ?

    How to Show ActionScript Graphics based Spinner on Flex or mobile application
    Solution:

    Check out the BusyIndicator component introduced in Flex 4.5:
    <s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
                   xmlns:s="library://ns.adobe.com/flex/spark">
        <s:BusyIndicator />
    </s:Application>

  • How to render web items based on the authorisation profile of the user

    Hello,
    Is there any way to render web items based on the authorisation profile of the user. The only way i can think of is:
    - Write ABAP to look up into the security mapping tables.
    - Convert the ABAP report into RFC-Enabled FM. The selection variables will be part of the import/export parameters of FM and table can be used to display the result.
    - Create HTML template using WAD, write Java Script to call the FM and map the import/export parameter. Display the result in Table.
    But i don't know How to use the Java Script to call Function Module (FM) and get back the authorization through parameter.
    Is anyone know about it or is there any other method to do it? I can't find any solution and it is very critical for me.
    Any help is highly appreciated.
    Rajat

    Hi Rajat,
    Do you mean that you want certain users to be able to use only certain web items? I think you can use the libraries for that and assign them to roles:
    http://help.sap.com/saphelp_nw04/helpdata/en/4e/0f813b420ce60ee10000000a114084/content.htm
    Hope this helps...

  • How to show two items using $f_Show_On_Value_Item_Row

    Hi,
    I have a select list with values with Yes, No and two items(1 check box, 1 text field) below it.
    I want to show two items if i select 'Yes' in select list.
    I am able to show/hide one item using onchange="$f_Show_On_Value_Item_Row(this,'P1_A_EMAIL_PERS_REQ','Yes');"
    How can i pass two items to this function.
    Thanks for ur help in advance
    Regards,
    Ram

    Ram,
    Rather than putting the call to $f_Show... inline with the onchange handler, create a separate function and call that function does the work and call that function instead. See this thread for some more details:
    Problem when calling more than 1 Javascript function
    Regards,
    Dan
    http://danielmcghan.us
    http://sourceforge.net/projects/tapigen

  • How to show list items in html page design?

    Hi all,
    I have a SharePoint list with column Title, Logo, Project Summary, Project Description and would like to show list items in html table design like:
    How to achieve this? thanks in advance!

    As per my understanding, You want to just redesign your list form. You can achieve the same using SPD2010 or you can use jQuery also if you don't have rights for SPD customization.
    Create
    a custom list form using SharePoint Designer
    SharePoint
    form: present fields side-by-side
    Thanks.

  • How to show invisible items in Time Machine Backups?

    Dear All,
    How can I show invisble items on //Time Machine Backups/Backups.backupdb ?
    I've backed //Lion/Users/User/Library , but when i checked the backed folder, i could not find it.
    Any help!!!
    Regards,
    Abdelaal,

    Open Terminal (Applications > Utilities > Terminal.app) and paste this command
    defaults write com.apple.finder AppleShowAllFiles TRUE; killall Finder
    To turn invisible files off again, use
    defaults write com.apple.finder AppleShowAllFiles FALSE; killall Finder

  • How not show duplicate rows based on one field

    Oracle Database 11g Enterprise Edition Release 11.2.0.3.0
    Hello
    I have a query that looks for certain scripts that did not run on a particular day compared to what ran the same day a week ago. We want to include the start_datetime and end_datetime but when I add it to the select statement it brings up all instances of the jobs that run multiple times during the day. Is there a way to exclude the extra rows based on the script_name field?
    SELECT instances.script_name,
                             instances.instance_name,
                             REGEXP_REPLACE(master.description,
                                            chr(49814),  -- em-dash
                                            '-') description
                                            --instances.start_datetime
                      FROM   xxcar.xxcar_abat_instances Instances,
                             xxcar.xxcar_abatch_master  Master
                      WHERE  1 = 1
                      AND    TRUNC(start_datetime) = TRUNC(TO_DATE(:p_StartDate, 'YYYY/MM/DD HH24:MI:SS')) - (:p_NumOfWeeks * 7)
                      AND    Instances.SCRIPT_NAME = Master.SCRIPT_NAME (+)
                      MINUS
                      SELECT script_name,
                             instance_name,
                             NULL
                             --NULL
                      FROM   xxcar.xxcar_abat_instances
                      WHERE  1 = 1
                      AND    TRUNC(start_datetime) = TRUNC(TO_DATE(:p_StartDate, 'YYYY/MM/DD HH24:MI:SS'))

    MINUS does a set operation - removing rows from the first set that exactly match the second set.
    When you add columns to the first set, you want a more restricted filtering - try a multi-column NOT IN:
    To remove multiple runs, group and get min/max
    SELECT instances.script_name,
                             instances.instance_name,
                             REGEXP_REPLACE(master.description,
                                            chr(49814),  -- em-dash
                                            '-') description,
                             min(instances.start_datetime) start_datetime,
                             min(instances.end_datetime) end_datetime
                      FROM   xxcar.xxcar_abat_instances Instances,
                             xxcar.xxcar_abatch_master  Master
                      WHERE  1 = 1
                      AND    TRUNC(start_datetime) = TRUNC(TO_DATE(:p_StartDate, 'YYYY/MM/DD HH24:MI:SS')) - (:p_NumOfWeeks * 7)
                      AND    Instances.SCRIPT_NAME = Master.SCRIPT_NAME (+)
                      AND (script_name, instance_name) NOT IN
                    ( SELECT script_name,
                             instance_name
                      FROM   xxcar.xxcar_abat_instances
                      WHERE  1 = 1
                      AND    TRUNC(start_datetime) = TRUNC(TO_DATE(:p_StartDate, 'YYYY/MM/DD HH24:MI:SS'))
    group by instances.script_name, instances.instance_name, master.descriptionYou didn't give table definitions, and the query has schemas in it, so I didn't test it.
    regards,
    David

  • How to set a default date for a custom field of Date type in project server 2010.

    hi,
    can somebody help  me.
    How Can i set the default date for a custom field of date type in project server 2010 ?

    Dear Rohan,
    You can set default value to custom field thru Lookup table. Assign lookup table to custom field and set default value to some lookup value (Note: check the “Choose a value to use as a default when adding new item” checkbox).
    Regards,
    Avinash kumar | Blog:http://avigr8.wordpress.com | If you found this post helpful, please “Vote as Helpful”. If it answered your question, please “Mark as Answer”.

  • Required item no: to populate custom field while creating item for a Sales order

    Hello Experts,
    I have created a custom field for item data of sales order using AET .
    I want to populate this field automatically when ever we create a new item for a sales order using UI or CRMD_ORDER or WCEM by concatenation Sales order number and item number.
    We are getting Item GUID but not getting the item number(need item number before getting saved is their any chance to get item number from item GUID ) to populate the field and save it.
    For this we tried using BADI's
    CRM_BTX_EXTENSIONS
    CRM_ORDERADM_I_BADI
    Thanks in advance,
    Manasa Veena P.

    Where did you add the field ?

  • How to change the Tab name for a custom field added in IC Winclient

    I have successfully added a field using eewb and it is appearing on my transaction in CIC0 but it is on a tab that says Customer Fields.  In EEWB a BADI called ZEEW_CUSTOMER_H01 was generated and it has a methods called  CRM_CUSTOMER_H_SET_TITLE.  It indicates you should be able to use this to rename the tab but the method is empty.  Anyone have an example of the code you pass in to rename the tab screen.  Thanks, Lisa

    >>and how will it effect in the report?
    You wouldn't see any direct effect on the Report.. But if you transport the report to QA & leave the Message class in Dev, it might result in syntax issues & you will not be able to execute the report. Just ensure that both of them get transported to QA & you will be fine.
    ~Suresh

  • How to add into dynamic selection criteria (FBL1N) - custom field from LFB1

    Hello all,
    i have following problem. I added new customer field into table LFB1 (Z* field). And now i need to use this field as dynamic selection criteria in transaction FBL1N. I enhanced selection view for logical database KDF - i have created new customer view and I added my new field from LFB1. It is OK, i see this field in dynamic selection criteria in FBL1N but if i try to select according that Z* field, short dump occured.  
    open cursor with hold LC_KRED for select (VF_KRED_FIELDS)
            from <b>VF_KRED</b>
              where LIFNR in KD_LIFNR
              and   BUKRS in KD_BUKRS
              and   LAND1 in KD_LAND1
              and   KONZS in KD_KONZS
              and   VBUND in KD_VBUND
              and   AKONT in KD_AKONT
              and   BUSAB in KD_BUSAB
              and (VF_KRED_WHERE)
    Problem is in VF_KRED - this is database view (LFA1 joins LFB1). This view has no Z* fields and therefore it cannot be use in statement above -> dump.
    Is needed repature of standard - enhancement of view VF_KRED?
    Thank you very much.

    Hi guys,
    thanks so far. I managed to show prompts in the report. But still my problem is nor 100% solved
    I would like t achieve that the filtered criteria in the report title is separated through a comma like in the report filter summary - e.g.: {001, 002, 003, 004} followed by just 1chart/table that is including the whole information.
    When I however just drag a variable into the report it automatically created different sections, right? Like ........ table, chart, whatever... .......table chart whatever........
    Regards

  • How to transfer SRM PO Condition Type and Custom fields to ECC?

    Hi All,
    I have a scenario to transfer SRM Line item condition types and few custom fields to ECC.
    I have found the following things but structure  'CI_EKPODB' does not exists in ECC.
    I am using 'SRM 5.00' and 'SAP ECC 6.0'.
    NOTE: I have to transfer condition records when PO is getting created / modified.
    1) Earlier I was planning to use BADI 'BBP_CREATE_BE_PO_NEW' in SRM and this will transfer the data to ECC in case of PO 
        Creation.
                   It contains the Condition fields to be passed to ECC.
    But i am unable to implement the same, whenever i create implementation when i click 'Activate' its getting activate then after few seconds its getting deactivate, i think this is because this BADI is not allowed for multiple use and SAP has already made one implementation on the same.
    2) I need to implement BADI 'BBP_ECS_PO_OUT_BADI' in SRM and 'BBP_PO_INBOUND_BADI' in ECC.
    SRM BADI will pass verified field details to ECC as a custom fields
           It does not contains the Condition fields to be passed to ECC, so i was planning to pass the same as custom field(s).
    ECC BADI 'BBP_PO_INBOUND_BADI'  will be used to map the fields to correct place and this should work.
    i need to modify the structures and pass all the custom fields (z-fields) - (CI_EKPODB but does not exists kindly suggest) as data.
    Other required details:
          Transfer of PO does not supported by SAP for service PO's, any suggestion on the same?
    Expecting quick reply from your end.
    Thanks in advance.
    Regards,
    Hemant

    Naresh,
    Thanks for quick response.
    My concern is this BADI 'BBP_CREATE_BE_PO_NEW' will trigger only in case of creation, not when PO is changes.
    I have to transfer condition types and custom fields to ECC in both the case (create / change)
    If i have to do this only in case of creation then i can pass Condition types / custom fields then i can use parameter 'CS_PO1_DOCUMENT' from method 'FILL_PO_INTERFACE1'.
    this parameter contains 'IT_POCOND', 'IT_POCONDX' and 'IT_EXTENSIONIN' as parameter  so my problem will be solved.
    But i dont think this will trigger in both the cases and 2nd thing i cann't implement the BADI since its not marked for multiple use so i am unable to implement the same.
    Kindly correct me if i am wrong.
    Once again thanks for your reply.
    Please suggest on the same.
    Regards,
    Hemant

Maybe you are looking for