How to show swiss franc symbol(₣) in reports 6i ?
Hi,
I want to show the quantities with the currency symbols in my reports. Its properly showing $ but franc symbol is not coming. I tried hard coding the symbol , its not even getting pasted in the column formula (coming as inverted question mark).
Please help !!!!!
Thanks
Subhrajit
I call reports using Oracle Forms.
Ok I got solution.
Thanks a lot
Similar Messages
-
How to show all view tab (Main Report and all Sub Report) in Visual FoxPro 9
I use ActiveX from Crystal Report Developer XI for viewer in Visual FoxPro 9 and I already know how to show Main Report by using command:
oRptRun=createobject("CrystalRuntime.Application")
oRptView=thisform.oleRptViewer
oRptOpen=oRptRun.OpenReport('MyReport.rpt')
oRptView.ReportSource=oRptOpen
oRptView.ViewReport
Inside the MyReport.rpt there is two subreport name :
1. MySubReport1
2. MySubReport2
My Question is :
How to show all view tab (Main Report and all Sub Report) at the 1st time we call ViewReport?
I try to using command :
oRptRun=createobject("CrystalRuntime.Application")
oRptView=thisform.oleRptViewer
oRptOpen=oRptRun.OpenReport('MyReport.rpt')
oRptSub=oRptOpen.OpenSubreport("MySubReport1")
oRptSub=oRptOpen.OpenSubreport("MySubReport2")
oRptView.ReportSource=oRptOpen
oRptView.ViewReport
but only show Main Report (view tab name : Preview)?
Did I miss any command before I call oRptView.ViewReport?Your right, there is only one tab to view the report.
To open the subreports you will need to click on them in the main report. I don't know of a way to open them programmatically like you are doing here
http://diamond.businessobjects.com/robhorne</a> -
How to show unhidden parameter in linked report in report manager in ssrs ?
Hi,
in my ssrs report1 i have added a image,if i click on that image it will redirect to report2 and it will take parameters from report1 automatically and all parameters are in report2 are hidden because it will consider report1 parameters,but here my requirement
is
in report2 i have total six parameters and all are hidden,i want to show the one of the hidden parameter(LOB) in report,so, i was set visibility property to visible, now i am able to see that one parameter(LOB).
but after deploying the report in report manager,when i click on the image it is not showing the parameter(LOB)
Do i need to change anything in image properties?please let me know
Please help me with this issue how to show the that one particular parameter(LOB) in report manager which is unhidden?, it is an urgent requirement.
here we are building reports on cube.
Please let me know if you need more information.
Thanks in advance,
NaveenHi Naveen,
As per my understanding, since the purpose of a drill-through report is to pass the parameters from main report to the details report, we wouldn't want users to see or modify the parameters in the details report. Therefore, by default, the parameter pane
is automatically hidden in the details report.
In this scenario, we can try to use “Go to URL” instead “Go to report” option to work around this issue. If the parameters are multi-value parameters, we can use the expression to like below:
="javascript:void(window.open('http://server_name/reportserver?/Report_folder/Report_name&A=" &Join(Parameters!B.Value,"&A=") & "','_blank'))"
If the three parameters are single-value parameters, we can use the expression to like below: ="javascript:void(window.open('http://server_name/reportserver?/Report_folder/Report_name&A=" & Parameters!B.Value & "','_blank'))"
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
How to show image in TestStand xml report
Hi,
I am using TestStand to run DLLs written over CVI.
I am using the xml report for collecting results.
Some of the tests i run require showing images on the report -
I would like to know how to allow showing an image on xml report by writing a CVI code.
Thanks,
MoshikHi Moshik,
There is an example for inserting images in your report in this discussion:
http://forums.ni.com/ni/board/message?board.id=330&message.id=2819&requireLogin=False
TestStand uses the sequences named reportgen_***.seq that default to the
C:\Program Files\National Instruments\TestStand 3.5\Components\NI\Models\TestStandModels directory for report generation.
You can edit the reportgen_xml.seq for XML reports.
Is it really necessary for your DLLs to do the image insertion?
Gavin Fox
Systems Software
National Instruments -
How to show lines in my matrix reports??
hi all,
i want to show matrix lines in my report. if an item code has data then it shows lines otherwise it shows null value with no lines....
plz helpi got it... :)
now no need to reply on this thread -
How to show Blank values in Bex Report
Hi friends ,
In my bex report one of the KF Column having zero's and Blank values .
Ex . Mat Price
A 0
B
C 15
when i create a condition Price > 0
Then the given Out put is
Mat Price
C 15
but the required Out put is
Mat Price
B
C 15
I.e I have to Remove only zeros and i should show blank values. Could you pls give some Ideas on this .Hi friends thanks for response,
but my requirement is
Mat
Price1
Price2
A
0
B
12
C
15
D
0
E
8
F
0
The Required Out put should be
Mat
Price1
Price2
Price3 (1+2 )
B
12
12
C
15
15
D
0
0
E
8
8
The user don't want see materials Price1 which is Zero . So I should remove materials A and F in Price1 column .
IF i apply condition on Price1 > 0 in the out put B and D also not displaying bcoz blank values consider as Zero.
Can you pls give some ideas how to full fill this Requirement -
How to bring new rupee symbol in reports
Dear Gurus,
We have a requirement that in all the exixting reports we need to show the new rupee symbol as $ comes doe USD.
Please help me with the steps to do this.
Thanks in advance.Suggested by SAP in OSS 1503523
Solution
We recommend to postpone usage of the new character INDIAN RUPEE SIGN until the character and its code point have been formally released with Unicode standard 6.0.
When you decide to use INDIAN RUPEE SIGN before it is formally released, make sure, that your input methods and fonts use the code point U-20B9 for the INDIAN RUPEE SIGN and that the official layout of the INDIAN RUPEE SIGN is used.
Using a different code point for the INDIAN RUPEE SIGN will cause future problems with data consistency, data communication and searching.
SAP currently does not provide input methods or fonts which cover the INDIAN RUPEE SIGN nor has any suggestions, which input methods or fonts can be used.
INDIAN RUPEE SIGN cannot be used in Non-Unicode SAP systems. -
How to show total pages in a report
Hi Experts,
I have to show the pages in the formart current page/ Total pages. I am not able to claculate the total pages. Please help me and give the code.
Thanks a lot.
KrishanThe code below shows how to display the total number of pages in a report like "Page 1 of 8." However, it doesn't work if you execute the program as a background jobs.
CODE
" Declare a variable
DATA L_PAGE_COUNT(5) TYPE C.
" Copy this code to the end of program
" Page count will be printed on each page here
WRITE SY-PAGNO TO L_PAGE_COUNT LEFT-JUSTIFIED.
DO SY-PAGNO TIMES.
READ LINE 1 OF PAGE SY-INDEX.
REPLACE '-----' WITH L_PAGE_COUNT INTO SY-LISEL.
MODIFY CURRENT LINE.
ENDDO.
TOP-OF-PAGE.
WRITE: /(70) 'Heading' CENTERED, 70 SY-PAGNO,'of ', '-----'.
Refer : http://www.sap-basis-abap.com/sapab007.htm -
How to show error message in a report program
Hello Guys,
I am making a report using smartforms. I am successful in showing data but problem is if if i put a value in parameters that does not exist is database, the smartform runs and related fields shows as empty fields. But the form is running. I want to show error message if the parameter values dose not matches with the database values. The message will show as Document not exists
So i used related error msg here like
if sy-subrc ne 0.
message e357.
endif.
But it is not working for passing values to smartform. It works if i use in classical report. Plz help me on this issue.
Thanks,
Rosaline.>
Rosaline. wrote:
> Thanks all for reply. Should i have to use message before call function 'SSF_FUNCTION_MODULE_NAME' ? I tried it but not working.
>
>
if it_final[] is not initial.
>* if sy-subrc ne 0. ---> "Remove this condition check, it not required
> Message e000(8i) with 'Parameter value not found'.
> endif.
> * endif. ---> "remove this
>
Hi,
Sy-subrc doesnt need to be validated here, remove that If condition and check again.
Regards,
Karthik D -
How to show refreshed modal window(2nd report region window) - reposting
Hi,
I have a requirement where i scroll thru different rows in grid region.
Moment I tab out from first row, I pop up 2nd report, where I show related detailed data lines for the tabed out line of first grid.
So my 2nd window is a report region query, whose 'where' clause contains the primary key from the row of first grid window.
On tab out of a row of first window, I have a javascript function, which shows 2nd report region using:
var mywindow =
window.showModalDialog
('http://MY-URL-/ebus/apexQA111/f?p=&APP_ID.:25:&SESSION.',myObject,'dialogWidth=800px;dialogHeight=300px;dialogLeft:50;dialogTop:50');
Problem:
On First tab out, I get the correct data display on 2nd window, which is related to current tabbed out row.
However, If I tab out from next record, modal window pops up and it still shows my detailed data of first tabbed out row.
Somehow the 2nd window is not getting refreshed/recalculated based on my new tabbed out row. I only have showmodaldialog in my JS function.
Anyway to refresh the window based on new values of the where clause variable? and then showing the window?
Please help!!
Regards,
Ravi.
Edited by: Rave on Nov 26, 2009 6:15 AMHi Rave,
You can refresh any window with the java script below, just make it conditional on the value of an item within your page so that it dose not run every time the page is loaded.
if ($v('P1_MY_ITEM') === 'foo' ) {
window.location.href = document.location.href;
} -
How the show parameter form for the report over the web by using an url ?
hello,
my url to call my report is :
http://server/reports/rwservlet?report=rtm0350.rep&desformat=html&userid=un/pw@hostring&server=rep_server¶mform=yes
but it doesn't show me the parameter form to introduce the parameters and I get :
'FINISH SUCCESSFULLY'
has anybnody any idea ?
thank'sIf this is a 'paper' report then =yes has always worked for me as long you have parameters declared in the report.
Description Use PARAMFORM to specify whether to display the Runtime Parameter
Form when you execute a report through CGI or a servlet. PARAMFORM is used only to
supply parameters to paper layout reports, not JSP-based Web reports.
Syntax PARAMFORM=YES|NO|HTML
Values
■ YES Display the Parameter Form.
■ NO Do not display the Parameter Form.
■ HTML Display the Parameter Form in HTML format.
Message was edited by:
Bob C -
How to show view tab Main Report and all of Sub Report in one action through Visual FoxPro
How to show all view tab (Main Report and all of Sub Report) in one action.
I already know how to show Main Report with this code sample:
oRptRun=createobject("CrystalRuntime.Application")
oRptView=this.Parent.oleRptViewer
oRptOpen=oRptRun.OpenReport('MyReport.rpt')
oRptView.ReportSource=oRptOpen
oRptView.ViewReport
Inside the 'MyReport.rpt' it has 2 subreports:
1. MySubReport_1
2. MySubReport_2
I try to show MySubReport_1 and MySubReport_2 together with their own Main Report with this code sample:
oRptRun=createobject("CrystalRuntime.Application")
oRptView=this.Parent.oleRptViewer
oRptOpen=oRptRun.OpenReport('MyReport.rpt')
oRptSub1=oRptOpen.OpenSubreport('MySubReport_1')
oRptSub2=oRptOpen.OpenSubreport('MySubReport_2')
oRptView.ReportSource=oRptOpen
oRptView.ViewReport
Did I miss something because there was only view tab 'Preview' (Main Report) shown without view tab MySubReport_1 and MySubReport_2.
Thank you.Your right, there is only one tab to view the report.
To open the subreports you will need to click on them in the main report. I don't know of a way to open them programmatically like you are doing here
http://diamond.businessobjects.com/robhorne</a> -
How to show more than one record at a form-like style report?
Hi All,
I developed a form-like style report
I want it to show more than one record at once (At the same page)
I tried that by setting the value to "Maximum records per page" property for the repeating frame to 10
but when I close the property palete and open it agian the value is returned to 1 !!!
how to show more than one record at the same page?????
Thank uHi,
there's perhaps another property like "page protect". If than 2 records didn't fit at one page there's a page break. Or is there any object inside the repeating frame with page-break properties? Sorry .. it's like looking into a chrystal ball ...
Regards
Rainer -
How to show all the search result in a report page
I have a report page which the user can enter first or last name to find the matched employees. The current report only show maximum of 15 matched results. How to show all of them in one page if more than 15.
Also, the employee name on the report is a link, how to make the link to be conditional. ( I mean it can be a link or not based on another column)
Thanks.
JenHi, you can change the number of rows on the report definition page (15 is the default value)- that's also where you can change pagination and max. number of rows etc.
About the second question - you will have to use Case or Decode in your report query and have the value as link or not based on the condition column, something like:
Select Decode(condition_column, 'link_value', '<a href="f?p=YOUR_APP:PAGE_TO_LINK_TO:' || :SESSION || ':::::">display_column</a>' , display_column) From .....
Hope this helps. -
Report : How to show all the reports in Content Management
Hi,
Can anyone tell me how I can show the "Resource Locks" Report in Portal.
I can see 4 reports through Content Management -> Reports i.e. Approval Maintenance, Link Consistency, Resource Statistics, Time-based publishing.
If I want to add more reports over here than "How I can achieve it".
Also I have seen the settings System Administration -> System Configuration -> KM -> CM -> Repository Managers -> Reporting Repository
But here I find no combo box for Active Reports, so from where I can activate the reports and show them in Content Management -> Reports
Please help me.
Regards
DeepDeep,
Are you talkign about the report which give you details of which Portal Objects are currently locked?
If yes, then you can go to System Adminitrator > Monitoring > Object Locking
Hope this helps,
*Points will be appreciated.
Maybe you are looking for
-
How to get the data from multiple tabes into single table
hi all, here i am having 10 data base tables,how to get the data into a single table. regards, subba reddy
-
How do you change the Color Red, that shows up on various points of the Calendar to another color? Persons with certain eye problems have visual irritations that can be caused by the color Red. This problem came up with the update to IOS 7.0.
-
Screen Resolution Problem in Session Method
Hi I want to use session method in BDC. How to resolve screen resolution problem in Session Method? Please give me the code or steps regarding this. Thanks & Regards venkateswararao
-
Approval work flow for Role based and Resource based
Hi All, We have to implement approval work flow for the following things in OIM 9.1.0.1 Approval work flow for Functional Roles (Groups in OIM) (Approvalsrequired for users to get these roles) IT Roles (Resources in OIM) (Approvalsrequired for users
-
Creating Column in table or use Foreign Key
I have a bunch of tables that are year specific, so I need to store the year in the record. I'm not sure if I should create a column in each table called 'year' or create a master 'Year' table and use a foreign key to it in all my other tables. Any a