How to show the subcommunities in the pages

Assume that there is a community C1, which contains several pages, P1, P2...; C1 also has two sub-communities, SC1 and SC2 . there are also several pages in the two sub-communities.
Now i want to show the pages of SC1 and SC2 in two pages of C1 , say P1 and P2. which means that P1 will have several tabs within it, each tab shows one page from SC1 ; and P2 will have several tabs within it, each show one page from SC2.
Does anyone know how to configure it??
Thanks!!
Wen

you should be able to do this with ALUI Adaptive tags...
Check out: http://edocs.bea.com/alui/devdoc/docs60/References/API_Libraries/6.1/TagDocs/index.html and especially the tags:
ptdata:currsubcommunitiesdata
ptdata:currcommunitypagesdata
and logic:foreach which allow you to iterate over the returned lists of the 2 tags above...

Similar Messages

  • How to show the login user Id in the upper right corner of each page?

    Hi,
    I was wondering how to show the login user Id in the upper right corner of each page?
    thanks so much!
    cchu

    Cchu,
    The easy question first: applying a style to the welcome message. If you look at the page source, you'll see that #WELCOME_USER# is expanded to <div class="app-user">Welcome: DEMO</div> So to change the style of the message, you need to tweak the style of the app-user div in your CSS, or override it in a style block in your HTML header.
    Now, the tougher question: why the text is wrapping for you. And, really, without seeing your entire page, I can't give a full answer. But I'd suggest that what's most likely happening is that the table column you're putting it in is too narrow, so it's wrapping; try replacing the td tag with <td nowrap="nowrap"> This will force the column to be wide enough to display the full message, but might result in weird formatting elsewhere on the page (depending on what all is in your table).
    -David

  • How come some of my "top sites" in safari won't show the pages?

    I had to restore my system and now some of the TOP SITES in safari wont show the pages and only show the black page.  If I click on the black page, it loads the page, but it stays black in top sites.  Any help would be nice thanks

    It is probably just an artifact of restoring. Once you type their names into the url bar again, the sites and their last images will show up again in Top Sites.
    I use an obscure method that clears all caches on every logout, and my top sites always comes up all black when I log in. It is not really a defect, it just does not have an old page-image to show you until you visit that site again.

  • How to remove the Page Item in thin Bean JSP

    Hi, I'm wondering how to remove the Page Item in JSP developed by BIBeans, since I have tried to remove the Presentation's Page Item in BiBeans Catalog, but with no result in JSP. Thank you!
    Jeff

    There are two ways to do this:
    1) If you want to remove and individual dimension from a presentation, you can hide the dimension. This can be performed directly from within QueryBuilder. Within the first section of Query Builder that shows the selected measures selected and associated dimensions, simply remove the required dimensions from the right dialog panel.
    2) To hide all page items within a presentation, simply add the following the property, pagingControlVisible="False", to the presentation tag in your JSP. For example:
    <orabi:Presentation location="Local Computer Sales/Products/KPI Sales Prior Period and Prior Year" id="BIProductKPIs_pres2" pagingControlVisible="False"/>
    Hope this helps
    Business Intelligence Beans Product Management Team
    Oracle Corporation

  • How to get the page number's i nthe xml output

    Hi All,
    Greetings!!!!!!!!!!!!!!!!!!!!!!
    Need help to show the page number in this format 1/1 & 1/2.
    How to get this by defining a variable and getting it randomly.
    Please help...
    Thanks
    Rajesh
    Edited by: Badsha on Mar 26, 2010 12:20 AM

    Hi,
    Thanks for your reply.
    code works fine but it calculates total pages and shows page number as 1/2...
    But my requirement is i am converting AR remittance report to xml. and output will have diff outputs for a check date based on the supplier.
    For Ex..pdf output for check date '01-jan-2010' will have 5 pages firts two pages belong to same supplier(for this i want page number to be shown as 1/2 & 2/2) and rest of the pages belong to different supplier(for this i want page number to be shown as 1/1..)
    Please help to achieve this in my output.
    Thanks
    Rajesh

  • How to show the new table record after creating

    I have a table form. After creating a new record to the table, the page go back to the same page. I wanta know how to show the new record after click 'Create' button. Right now, all the items will be cleared.
    Thanks.

    The button submits the page so just create a branch that directs to a new page (which you'll have to create if you have not already done so) after submission which directs to a new page and uses the newly generate PK to display the row you've generated. You'll need to make the branch conditional on that press of the Create button.
    Phil

  • How to make the page expired when user click back

    how to make the page as expired when i click back button on the browser.
    i want a better way.
    actually i have a timer.when it reaches 00.00 then the expired page will be called automaticlly using location.href="expired.jsp" then if the user clicks back it should not show the previous page.this concept is applied with paging concept
    response.setheader is not working ...
    i have redirect when click back using
    <body onunload>....i call another page here.
    but it is not a good way.
    so pls help me to solve this problem
    using session or another good way

    Use this instead.
    Frame.setDefaultCloseOperation(javax.swing.WindowConstants.DO_NOTHING_ON_CLOSE);

  • Show the page set up as in  MS word using java

    Hi all,
    I am working to show the page setup as in MS Word ,i.e when ever we change the paper size then the image of the paper had to be changed and seen there itself.Please provide some valuable code and tell me how to proceed .
    Thanks in advance.

    Sarvananda, please do not post rude responses. Why be so hostile? Just be helpful, not elitist.
    As far as the topic question, I believe what you are trying to is provide some kind of graphical representation of the page, that updates as the user changes margins and other page-related settings? (See Sarvananda its not that hard to read a question, now is it?)
    You should look into using PrinterJob and its default page dialog. You can bring this up with the following:
    PageFormat pf = new PageFormat();
    PrinterJob pj = PrinterJob.getPrinterJob();
    pf = pj.pageDialog(pf);This has the visual appeal you are looking for I believe?
    Good luck.

  • How to print the page in custom format

    Hi All,
    I've a login page like
    USER ID : Test box to enter data
    PASSWORD: Text Box to enter data
    A Button named as Print
    When i click on print button i want to print the form in custom format. when i use window.print in java script it is printing text boxes and button . but i dont want to print button and text boxes. i just want to print the user id and password entered by the user with corresponding labels.
    Can anyone suggest me how to print the page in the above format with out using the request object. coz i need to implemnt above with plain java script and html.
    Tks in Advance

    Use CSS. Check out the 'media' attribute. http://www.w3.org/TR/REC-CSS2/media.html

  • How to show the quantity in decimal in MIGO

    Dear expert,
    How to show the quantity in decimal in MIGO?? for example in material BOM the quantity is 12.480 but the quantity in MIGO is 13. it's automatically rounded.
    what should I do to show the decimal point in MIGO?
    Thanks
    Pauline

    Hi,
        Please check in su3 -
    defaults (Tab) -
    Decimal Notation.
        Change the decimal notation and logoff and login to apply the changes.
        I think it may help you.
    Regards
    Sreedhar Reddy

  • How to get the page number in the break section?

    Hi expert,
    The user wants the page number came right after the Break group name if the break section contains more than 1 page. E.g.
    ABC Compnay
    XXXXXXXXXXX XXXXXXXX
    XXXXXXXXXX XXXXXXXXXXXX
    BCD Company, p 1
    XXXXXXXXXXX XXXXXXXX
    XXXXXXXXXX XXXXXXXXXXXX
    BCD Company, p 2
    XXXXXXXXXXX XXXXXXXX
    XXXXXXXXXX XXXXXXXXXXXX
    CDE Company
    XXXXXXXXXXX XXXXXXXX
    XXXXXXXXXX XXXXXXXXXXXX
    How to get the page number in section break level?

    Hi Wes
    * Create a Field on the margin.
    * Set its "Source" to "Page Number"/"Physical Page Number".
    * Click "Page Numbering" button.
    * In "Reset At" list box, choose the Repeating frame that surrounds your detail group in the layout.
    This should cause Reports to increment the page number until the "Company" repeating frame resets.
    Regards
    Sripathy

  • How to edit the page 0 "template" in APEX 4.2

    I have an application that has been upgraded to APEX 4.2.  On page 0, when I try to move an existing region to Region Position 8 I get an error: "This region position is not in your page template".  Looking at the page definition (component view) I can see the name of the template associated with page 0, so I edited that page template and added #REGION_POSITION_08#, but still I get the same error message.  So I thought perhaps I would change page 0 to use a different template, but Edit Page does not show the page template at all for page 0. 
    So I suspect that page 0 is no longer supposed to have a template at all, yet my upgraded application does (sort of) and I can't change it.  Any ideas?

    Dear Paul,
    I used the login_table for my login page,
    which has only two fields username and password as like login screen, in my appliction in the change password page
    I used the another table called Update_user
    which has four fields,
    1.username
    2.current_password
    3.New_password
    4.Retye
    and the change password page contains this exact same 4 fields from this Table,
    whenever the users entering the 4 fields and if they click the create/update button the data will be stored in the Update_Table
    and the password field in the Login_table will be updated based on the following trigger,
       create or replace TRIGGER  trg1
    before insert on update_user
    referencing old as old new as new
    for each row
    begin
        update login_table set password= :new.retype where username=:new.username;
    end;
           As you said I tried that :APP_USER and I made the username column as read only,
    When the values inserted except the username other 3 values inserted into the update_user table and the login_table not updated so the password also not changed,
    Is there any other way to directly upadte the password in the Login_table without going for another Table?
    Please Give some suggestion.
    Thank you,
    regards,
    Gurujothi

  • Hi, I am using Indesign CS6, How to set the page size in Inches.

    Hi, I am using Indesign CS6, How to set the page size in Inches.

    All fields in InDesign can be entered in any measurement system. So, if you want to make an 8"x10" document and go to File>New Document and the window looks like this:
    …you can type either 8 in or 8" into the Width field like this:
    …and when you move to the next field, it will convert the eight inches into the equivalent number in the unit of measure that it is using at the moment, like this:
    … (203.2 milimeters is the same as 8 inches). You can also enter a different measurement unit into other fields once the file is created, such as the width or height of a frame, or the position of an object in the X and Y coordinates.
    If you would rather just work in inches instead of having to type the inches mark or abbreviation, go to InDesign>Preferences>General and select the Units & Increments tab. There you will see Ruler Units for Horizontal and Vertical at the top of the window. Set them to Inches and all of the fields will display in inches. If you do that to an open document, you will change the unit of measure for that document. If you do it while no documents are open, it will change the unit of measure for any new documents you create. To change the unit of measure for existing documents, you will have to open each and make the change.

  • How to change the page Header background colour in a Theme

    Hello,
    I want to know how to change the page header background colour. If you are in the Editor I don't find a property where to change it.
    If you are in the Theme Editor in the header bar I want to change stands <b>Theme Editor</b>. This (in my case blue colored bar) I want to change in another color.

    Hello Radhika,
    thanks for your answer. Where do I find the option for the pageheader in System Administration>Portal Display>Theme Editor ->IView Trays exactly?
    The pageheader is a picture, which must be uploaded for the web dynpro. Why should any webdynpro element in the ivew tray. There is no relationship between these two parts.
    I have not found any option to change the web dynpro pageheader. Could there any extra theme editor for webdynpro?
    Thanks.
    Olaf

  • How to show the checked-out symbol in list of files in a folder

    Hi,
    When the folder is selected it is showing all the files in that folder. But, the user would not know which file had been checked out. In general it should show the lock symbol (As similar to Documentum, webtop) when a file had been checked out by some other user.
    How to show the lock/key column in list of files. Any other way to find a file had been checked out or not instead of going into the content information.
    Also, how do we add additional columns like author etc... to the list of files screen in UCM?
    Please help

    You should double check, but I don't believe that the check-out info is in the resultset. Because that information isn't available, the state of each row in the search results table cannot be defined. So, the first hurdle would be to add that info to the dataset.
    The second hurdle would be to alter the UI to leverage that info (e.g., the key icon when checked out).
    If you're looking to alter the folder views, then look to the COLLECTION_DISPLAY service & related template. Other views (e.g., search results) have different templates and backing services.
    -ryan

Maybe you are looking for

  • Regarding report for material status

    HI All, Can u guys pls help me thre is an error in the report which iam presenting now. The error is that iam getting the output for units in simple report is 'PC' and iam getting the out put for units in ALV as 'ST'. why, i need an immediate reply.

  • How can I use the Gmail app on the Watch?

    I do not use the Mail app on any of my Apple devices.  How can I use the Gmail app on the Watch?

  • Version Management update information

    Dear friends, Iu2019m just using a new version management in purchase order and purchase requisitions documents since a couple days and I would like to update the version management information on the old purchasing documents. Is there any way to do

  • Error installing IR Web Client

    Hi all, I've just installed Hyperion BI+ 9.3.1 and getting error while trying to open a sample BQY from Sample Contents. Error prompted: "Unexpected status 404 (Not found) returned on https://hrtest.app.com/workspace/dataacess/../../InsightInstaller/

  • Mime attachments / forwarded messages

    It seems when I receive a forwarded message on any of my mail accounts using my iPhone, all I see is a mime icon that is unable to be clicked. I have checked to see if the message as been downloaded (they are). It appears to happen with aol messages